EXPERIMENTAL STUDY OF HYPERSONIC RAREFIED FLOW NEAR THE LEADING EDGE OF A THIN FLAT PLATE
Rarefied gas dynamics - surface pressure & pitot pressure distribution in neighborhood of leading edge of thin flat plate
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Rarefied gas dynamics - surface pressure & pitot pressure distribution in neighborhood of leading edge of thin flat plate
The Navier-Stokes (NS) equations were integrated numerically for investigating the flow characteristics on the forepart of the spherical nose of a space vehicle such as the AOTV or AFE by a modified Accelerated Successive Replacement (ASR) scheme under hypersonic rarefied conditions. Technical feasibility of the mathematical approach was demonstrated by computing the flowfield on a spherical nose under conditions that the AFE encounters at times t = 15 and 20 seconds after its reentry into the atmosphere. Local similar solutions for the merged layer flow along the stagnation line of the sphere were developed. These are correct to the same degree of accuracy as the NS equations. These solutions provided stagnation line boundary conditions for the domain of integration on the spherical noise. Also, a parametric study of the stagnation line solution was made with a view to understand the flow characteristics in tunnels with different ambient fluids. Analytical expressions for surface slip temperature, jump conditions, and concentration level in the presence of the real gas effects at the top of the Knudsen layer were derived and used to calculate the stagnation line flowfield with nonequilibrium dissociation and ionization. A number of graphics were drawn to illustrate the basic physics of the flowfields. The present analysis can be extended to include real gas effects and to bodies of arbitrary shapes. It can further provide boundary conditions for integrating the NS equations in the near wake region.
Three-dimensional computational techniques, in particular the uncoupled CFD-DSMC of the present study, are available to be applied to problems such as jet interactions with variable density regions ranging from a continuum jet to a rarefied free stream. When the value of the jet to free stream momentum flux ratio approximately greater than 2000 for a sharp leading edge flat plate forward separation vortices induced by the jet interaction are present near the surface. Also as the free stream number density n (infinity) decreases, the extent and magnitude of normalized pressure increases and moves upstream of the nozzle exit. Thus for the flat plate model the effect of decreasing n (infinity) is to change the sign of the moment caused by the jet interaction on the flat plate surface.
Explore the source record for details and available documents.
Drag, heat transfer, and number flux were measured on sharp cones in the near free, molecule flow regime, and the results were compared with available Monte Carlo calculations. In general, the calculations predicted the magnitude of the data; however, the heat transfer and drag increased with increasing Knudsen number at a faster rate than predicted. Also the drag coefficients measured for the slender cones at high Knudsen number were higher than predicted for free molecule flow. These disagreements between theory and experiment could possibly be attributed to the simplicity of the surface interaction laws assumed in the theory. Reynolds analogy factors obtained from the experimental measurements agreed with free-molecule values and also with that obtained by the Monte Carlo technique.
Explore the source record for details and available documents.
Description of the aerodynamic molecular beam testing performed on the near earth spacecraft temperature alarm system that is designed to provide in-flight temperature information useful for safeguarding scientific equipment during perigee maneuvers. The temperature/heat flux calibration results obtained are summarized.
A paper by Henderson (1976) provides a method of predicting experimental sphere drag data. This approach uses two equations for the drag coefficient, one for relative Mach number less than one, one for relative Mach number greater than 1.75. For relative Mach numbers between these limits a linear interpolation procedure is followed. In a comment on this paper, it is claimed, on the basis of comparing predictions with experimental results, that a method proposed by Walsh (1975) gives better predictions of the drag coefficient for relative Mach numbers less than 1.75, provided that a modification of the procedure is made for relative Mach numbers less than 0.1. For values over 1.75, both methods are considered equally accurate. In a reply to this comment, it is agreed that the Walsh method is more accurate when Reynolds numbers are within a range between 20 and 200, and Mach numbers are between 0.5 and 1.25. Presumed errors and possible limitations in the Walsh procedure for predicting drag coefficients are discussed.
Explore the source record for details and available documents.
The Direct Simulation Monte Carlo method is used to study the hypersonic, rarified flow interference effects on a flat plate caused by nearby surfaces. Calculations focus on shock-boundary-layer and shock-lip interactions in hypersonic inlets. Results are presented for geometries consisting of a flat plate with different leading-edge shapes over a flat lower wall and a blunt-edge flat plate over a 5-degree wedge. The problems simulated correspond to a typical entry flight condition of 7.5 km/s at altitudes of 75 to 90 km. The results show increases in predicted local heating rates for shock-boundary-layer and shock-lip interactions that are quantitatively similar to those observed experimentally at much higher densities.
Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for the transitional flow about a flat plate at 40 deg incidence. The plate has zero thickness and a length of 1.0 m. The flow conditions simulated are those experienced by the Shuttle Orbiter during reentry at 7.5 km/s. The range of freestream conditions are such that the freestream Knudsen number values are between 0.02 and 8.4, i.e., conditions that encompass most of the transitional flow regime. The DSMC simulations show that transitional effects are evident when compared with free molecule results for all cases considered. The calculated results demonstrate clearly the necessity of having a means of identifying the effects of transitional flow when making aerodynamic flight measurements as are currently being made with the Space Shuttle Orbiter vehicles. Previous flight data analyses have relied exclusively on adjustments in the gas-surface interaction models without accounting for the transitional effect which can be comparable in magnitude. The present calculations show that the transitional effect at 175 km would increase the Space Shuttle Orbiter lift-drag ratio by 90 percent over the free molecule value.
The direct-simulation Monte Carlo method has been used in a numerical study of the transitional flow about two plate configurations at incidence; one of the two plates, both of which are 12 m long, has zero thickness, while the other has a thickness of 0.5 m and a node radius of 0.5 m. The flow conditions simulated are those of the Space Shuttle Orbiter during 7.5 km/hr reentry, in the 200-100 km altitude range encompassing most of the transitional flow for this vehicle. The results obtained clearly demonstrate that transitional effects are significant even at those altitudes where the flow about a typical space vehicle has been considered free-molecular.
Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for the transitional flow about a flat plate at 40 deg incidence. The plate has zero thickness and a length of 1.0 m. The flow conditions simulated are those experienced by the Shuttle Orbiter during reentry at 7.5 km/s. The range of freestream conditions are such that the freestream Knudsen number values are between 0.02 and 8.4, i.e., conditions that encompass most of the transitional flow regime. The DSMC simulations show that transitional effects are evident when compared with free molecule results for all cases considered. The calculated results demonstrate clearly the necessity of having a means of identifying the effects of transitional flow when making aerodynamic flight measurements as are currently being made with the Space Shuttle Orbiter vehicles. Previous flight data analyses have relied exclusively on adjustments in the gas-surface interaction models without accounting for the transitional effect which can be comparable in magnitude. The present calculations show that the transitional effect at 175 km would increase the Space Shuttle Orbiter lift-drag ratio by 90 percent over the free molecule value.
The flow of carbon dioxide through a small conical nozzle is computed using two different numerical approaches. The first of these is the direct simulation Monte Carlo method in which the physical phenomena are modeled at the molecular level. The second technique solves the Navier-Stokes equations of fluid flow. The purpose of the paper is to compare the solutions generated by these two methods for the conditions prevailing in a small, low density nozzle. The comparison between the two sets of solutions reveals only small differences. However, the flow properties in the thick viscous layer close to the nozzle at the exit plane show important deviations which have implications for the subsequent determination of the plume backflow.
The use of high-current short-pulse electron beams in low-density gas flow diagnostics is introduced. Efficient beam propagation is demonstrated for pressure up to 300 microns. The beams, generated by low-pressure pseudospark discharges in helium, provide extremely high fluorescence levels, allowing time-resolved visualization in high-background environments. The fluorescence signal frequency is species-dependent, allowing instantaneous visualization of mixing flowfields.
A review of the direct simulation Monte Carlo (DSMC) method of Bird is presented. The DSMC method provides the capability of simulating real gas flows in the rarefield flow regime. Recent developments and applications of the method for hypersonic flows are reported for both ground-based tests and during entry. The flows considered were three-dimensional, and both an existing general code and a new code under development were used.
The phenomena of shock/boundary-layer interactions and flow separation are investigated using both computational and experimental methods for low-density hypersonic flow about two-dimensional compression corners. The numerical calculations are made with the direct simulation Monte Carlo (DSMC) method. Experimental measurements provide information concerning the flowfield structure and surface flow patterns by means of gas glow discharge and oil flow pictures, respectively. Comparison of the two data sets provides a qualitative basis for assessing the ability of the DSMC method to describe such flows.
Explore the source record for details and available documents.