Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RHE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

In Situ ATR–SEIRAS of Carbon Dioxide Reduction at a Plasmonic Silver Cathode

Illumination of a voltage-biased plasmonic Ag cathode during CO 2 reduction results in a suppression of the H 2 evolution reaction while enhancing CO 2 reduction. This effect has been shown to be photonic rather than thermal, but the exact plasmonic mechanism is unknown. Here in this paper, we conduct an in situ ATR–SEIRAS (attenuated total reflectance–surface-enhanced infrared absorption spectroscopy) study of a sputtered thin film Ag cathode on a Ge ATR crystal in CO 2 -saturated 0.1 M KHCO 3 over a range of potentials under both dark and illuminated (365 nm, 125 mW cm –2 ) conditions to elucidate the nature of this plasmonic enhancement. We find that the onset potential of CO 2 reduction to adsorbed CO on the Ag surface is -0.25 V RHE and is identical in the light and the dark. As the production of gaseous CO is detected in the light near this onset potential but is not observed in the dark until -0.5 V RHE , we conclude that the light must be assisting the desorption of CO from the surface. Furthermore, the HCO 3 – wavenumber and peak area increase immediately upon illumination, precluding a thermal effect. We propose that the enhanced local electric field that results from the localized surface plasmon resonance (LSPR) is strengthening the HCO 3 – bond, further increasing the local pH. This would account for the decrease in H 2 formation and increase the CO 2 reduction products in the light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Photochemical Diodes for Simultaneous Bias-Free Glycerol Valorization and Hydrogen Evolution

Artificial photosynthesis offers a route to producing clean fuel energy. However, the large thermodynamic requirement for water splitting along with the corresponding sluggish kinetics for the oxygen evolution reaction (OER) limits its current practical application. Here, we offer an alternative approach by replacing the OER with the glycerol oxidation reaction (GOR) for value-added chemicals. By using a Si photoanode, a low GOR onset potential of -0.05 V vs RHE and a photocurrent density of 10 mA/cm 2 at 0.5 V vs RHE can be reached. Coupled with a Si nanowire photocathode for the hydrogen evolution reaction (HER), the integrated system yields a high photocurrent density of 6 mA/cm 2 with no applied bias under 1 sun illumination and can run for over 4 days under diurnal illumination. In conclusion, the demonstration of the GOR-HER integrated system provides a framework for designing bias-free photoelectrochemical devices at appreciable currents and establishes a facile approach to artificial photosynthesis.

09 BIOMASS FUELS↗
DOE OSTI2025

Operando Characterization of Fe in Doped Ni x (Fe 1– x )O y H z Catalysts for Electrochemical Oxygen Evolution

Iron-doped nickel oxyhydroxides, Ni x (Fe 1– x )O y H z , are among the most promising oxygen evolution reaction (OER) electrocatalysts in alkaline environments. Although iron (Fe) significantly enhances the catalytic activity, there is still no clear consensus on whether Fe directly participates in the reaction or merely acts as a promoter. To elucidate the Fe’s role, we performed operando X-ray spectroscopy studies supported by DFT on Ni x (Fe 1– x )O y H z electrocatalysts. We probed the reversible changes in the structure and electronic character of Ni x (Fe 1– x )O y H z as the electrode potential is cycled between the resting (here at 1.10 V RHE ) and operational states (1.66 V RHE ). DFT calculations and XAS simulations on a library of Fe structures in various NiO y H z environments are in favor of a distorted local octahedral Fe(III)O 3 (OH) 3 configuration at the resting state with the NiO y H z scaffold going from α-Ni(OH) 2 to γ-NiOOH as the potential is increased. Under catalytic conditions, EXAFS and HERFD spectra reveal changes in p-d mixing (covalency) relative to the resting state between O/OH ligands and Fe leading to a shift from octahedral to square pyramidal coordination at the Fe site. XES measurements and theoretical simulations further support that the Fe equilibrium structure remains in a formal Fe(III) state under both resting and operational conditions. These spectral changes are attributed to potential dependent structural rearrangements around Fe. The results suggest that ligand dissociation leads to the C 4v symmetry as the most stable intermediate of the Fe during OER. This implies that Fe has a weakly coordinated or easily dissociable ligand that could serve to coordinate the O–O bond formation and, tentatively, play an active role in the Ni x (Fe 1– x )O y H z electrocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Role of Cu 3+ in the Oxygen Evolution Activity of Copper Oxides

Cu-based oxides and hydroxides represent an important class of materials from a catalytic and corrosion perspective. In this study, we investigate the formation of bulk and surface Cu 3+ species that are stable under water oxidation catalysis in alkaline media. So far, no direct evidence existed for the presence of hydroxides (CuOOH) or oxides, which were primarily proposed by theory. Here, this work directly places CuOOH in the oxygen evolution reaction (OER) Pourbaix stability region with a calculated free energy of −208.68 kJ/mol, necessitating a revision of known Cu–H 2 O phase diagrams. We also predict that the active sites of CuOOH for the OER are consistent with a bridge O* site between the two Cu 3+ atoms with onset at ≥1.6 V vs the reversible hydrogen electrode (RHE), aligning with experimentally observed Cu 2+/3+ oxidation waves in cyclic voltammetry of Fe-free and Fe-spiked copper in alkaline media. Trace amounts of Fe (2 μg/mL (ppm) to 5 μg/mL) in the solution measurably enhance the catalytic activity of the OER, likely due to the adsorption of Fe species that serve as the active sites . Importantly, modulation excitation X-ray absorption spectroscopy (ME-XAS) of a Cu thin-film electrode shows a distinct Cu 3+ fingerprint under OER conditions at 1.8 V vs RHE. Additionally, in situ Raman spectroscopy of polycrystalline Cu in 0.1 mol/L (M) KOH revealed features consistent with those calculated for CuOOH in addition to CuO. Overall, this work provides direct evidence of bulk electrochemical Cu 3+ species under OER conditions and expands our longstanding understanding of the oxidation mechanism and catalytic activity of copper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Titanium-, Nitrogen-Doped Carbon Flowers Catalyze Electrochemical Nitrate Reduction Reaction to Ammonia

An emerging design heuristic for electrochemical nitrate reduction (NO 3 RR) catalysts is synthesizing electron-deficient sites to facilitate binding of electron-rich NO 3 – . However, this rule has rarely been applied to metal-, nitrogen-doped carbon (MNC) catalysts. Titanium (Ti), with low electronegativity and high NO 3 RR reactivity, is a compelling MNC candidate. To date, atomically dispersed TiN x motifs have eluded synthesis due to the strong oxophilicity of Ti. Here, in this work, we leverage nitrogen-rich carbon flowers (CF) to overcome synthetic challenges and produce Ti-, N-doped carbon flower (TiCF) catalysts. Advanced materials characterization demonstrates that TiCF catalysts are a mixed phase material with 3/4 of Ti atoms in TiO 2 -like nanoparticles and 1/4 of Ti atoms in novel, atomically dispersed TiN x sites. TiCF achieves 61 ± 7% NH 3 -selectivity at −0.70 V vs RHE and 14 ± 5 mA/cm 2 to NH 3 formation (| j NH 3 |) at −0.85 V vs RHE in (0.1 M NaOH + 0.1 M NaNO 3 + 0.45 M Na 2 SO 4 ) electrolyte. Control studies show both CF morphology and Ti sites are essential for high NO 3 RR activity. Density functional theory calculations attribute the NO3RR reactivity to TiN x , which facilitates multiple bond formation with surface intermediates to promote favorable NH3 synthesis pathways. Thus, TiCF exhibits 60× higher | j NH 3 | values than bulk Ti and NH 3 yield rates (>0.06 mmol NH 3 /h/cm 2 ) that are competitive with state-of-the-art MNC catalysts (e.g., FeNC, CuNC). TiCF introduces a new class of Ti electrocatalysts, advancing the MNC design space and sustainable NH 3 production.

ammonia↗
DOE OSTI2026

High-Rate, Selective Electrosynthesis of Cyclohexanone Oxime via In Situ Generation and Release of Hydroxylamine on Bismuth

Oxime compounds are key industrial intermediates for nylon precursors and commodity chemicals. However, conventional routes rely on multistep reactions and hydroxylamine (NH 2 OH) salts, raising significant safety and sustainability concerns. Although electrosynthesis offers an alternative, oxime formation on d-block transition metals suffers from poor selectivity, as nitrogen oxyanion intermediates bind strongly to the surface and are readily over-reduced to ammonia. Here, we report morphology-controlled p-block bismuth rhombic dodecahedra (Bi RDs) that promote in situ NH 2 OH generation and its desorption into the electrolyte, enabling an electrochemical-chemical decoupled route for cyclohexanone oxime (CHO) synthesis. Bi RDs deliver nearly 100% Faradaic efficiency (FE) at −0.5 V vs. RHE and a yield of 1.4 mmol h –1 cm –2 at −0.9 V vs. RHE in an H-cell, while maintaining a CHO selectivity of nearly 100% at 100 mA cm –2 in a flow cell. Under identical conditions, d-block electrodes (Cu, Pd, Ag) show FE below 30%. Density functional theory calculations reveal that Bi 6p orbital-derived surface states weaken intermediate binding and facilitate NH 2 OH desorption, suppressing over-reduction. Kinetic analysis, post-addition trapping experiments, and in situ ATR-FTIR and Raman spectroscopy suggest the following reaction mechanism: NH 2 OH is selectively generated at the electrode surface, released as a freely diffusing intermediate, and undergoes homogeneous condensation with cyclohexanone in the bulk electrolyte, bypassing the surface-confined Langmuir–Hinshelwood pathway. These findings demonstrate that regulating intermediate desorption through p-block orbital chemistry provides a general strategy for achieving high selectivity in electro-organic nitrogen synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Materializing efficient methanol oxidation via electron delocalization in nickel hydroxide nanoribbon

Achieving a functional and durable non-platinum group metal-based methanol oxidation catalyst is critical for a cost-effective direct methanol fuel cell. While Ni(OH) 2 has been widely studied as methanol oxidation catalyst, the initial process of oxidizing Ni(OH) 2 to NiOOH requires a high potential of 1.35 V vs. RHE. Such potential would be impractical since the theoretical potential of the cathodic oxygen reduction reaction is at 1.23 V. Here we show that a four-coordinated nickel atom is able to form charge-transfer orbitals through delocalization of electrons near the Fermi energy level. As such, our previously reported periodically arranged four-six-coordinated nickel hydroxide nanoribbon structure (NR-Ni(OH) 2 ) is able to show remarkable methanol oxidation activity with an onset potential of 0.55 V vs. RHE and suggests the operability in direct methanol fuel cell configuration. Thus, this strategy offers a gateway towards the development of high performance and durable non-platinum direct methanol fuel cell.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Breaking adsorption-energy scaling limitations of electrocatalytic nitrate reduction on intermetallic CuPd nanocubes by machine-learned insights

The electrochemical nitrate reduction reaction (NO 3 RR) to ammonia is an essential step toward restoring the globally disrupted nitrogen cycle. In search of highly efficient electrocatalysts, tailoring catalytic sites with ligand and strain effects in random alloys is a common approach but remains limited due to the ubiquitous energy-scaling relations. With interpretable machine learning, we unravel a mechanism of breaking adsorption-energy scaling relations through the site-specific Pauli repulsion interactions of the metal d-states with adsorbate frontier orbitals. The non-scaling behavior can be realized on (100)-type sites of ordered B2 intermetallics, in which the orbital overlap between the hollow *N and subsurface metal atoms is significant while the bridge-bidentate *NO 3 is not directly affected. Among those intermetallics predicted, we synthesize monodisperse ordered B2 CuPd nanocubes that demonstrate high performance for NO 3 RR to ammonia with a Faradaic efficiency of 92.5% at –0.5 V RHE and a yield rate of 6.25 mol h –1 g –1 at –0.6 V RHE . This study provides machine-learned design rules besides the d-band center metrics, paving the path toward data-driven discovery of catalytic materials beyond linear scaling limitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Highly selective electrocatalytic CO 2 reduction to ethanol by metallic clusters dynamically formed from atomically dispersed copper

Direct electrochemical conversion of CO 2 to ethanol offers a promising strategy of lowering CO 2 emission while storing energy from renewable electricity. However, current electrocatalysts offer only limited selectivity toward ethanol. Here we report a copper catalyst synthesized by a unique Cu-Li amalgm method over a commercial carbon support that achieved Faradaic efficiency (FE) higher than 91% at -0.7 V (RHE) and the active potential as low as -0.4 V (RHE) during direct electrocatalytic CO 2 -to-ethanol conversion. The catalyst also demonstrated stability over an extended period of operation. A strong correlation between the catalytic selectivity and the initial Cu atoms dispersion was found and Operando X-ray absorption spectroscopy identified a dynamic and reversible transformation from atomically dispersed copper atoms to Cu n (n = 3 and 4) under the electrochemical reaction. Frist-principles calculations further elucidate the possible catalytic mechanism of CO 2 reduction over Cu n .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High current density electroreduction of CO 2 into formate with tin oxide nanospheres

In this study, we demonstrate three-dimensional (3D) hollow nanosphere electrocatalysts for CO 2 conversion into formate with excellent H-Cell performance and industrially-relevant current density in a 25 cm 2 membrane electrode assembly electrolyzer device. Varying calcination temperature maximized formate production via optimizing the crystallinity and particle size of the constituent SnO 2 nanoparticles. The best performing SnO 2 nanosphere catalysts contained ~ 7.5 nm nanocrystals and produced 71–81% formate Faradaic efficiency (FE) between -0.9 V and -1.3 V vs. the reversible hydrogen electrode (RHE) at a maximum formate partial current density of 73 ± 2 mA cm geo -2 at -1.3 V vs. RHE. The higher performance of nanosphere catalysts over SnO 2 nanoparticles and commercially-available catalyst could be ascribed to their initial structure providing higher electrochemical surface area and preventing extensive nanocrystal growth during CO 2 reduction. Our results are among the highest performance reported for SnO 2 electrocatalysts in aqueous H-cells. We observed an average 68 ± 8% FE over 35 h of operation with multiple on/off cycles. In situ Raman and time-dependent X-ray diffraction measurements identified metallic Sn as electrocatalytic active sites during long-term operation. Further evaluation in a 25 cm 2 electrolyzer cell demonstrated impressive performance with a sustained current density of 500 mA cm geo -2 and an average 75 ± 6% formate FE over 24 h of operation. Our results provide additional design concepts for boosting the performance of formate-producing catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemisorbed oxygen or surface oxides steer the selectivity in Pd electrocatalytic propene oxidation observed by operando Pd L-edge X-ray absorption spectroscopy

Controlled electrochemical oxidation of hydrocarbons to desired products is an attractive approach in catalysis. Here we study the electrochemical propene oxidation under operando conditions using Pd L-edge X-ray absorption spectroscopy (XAS) as a sensitive probe to elucidate surface processes occurring during catalysis. Together with ab initio multiple-scattering calculations, our XAS results enable assignment of characteristic changes of the Pd L-edge intensity and energy position in terms of a mechanistic understanding of the selective oxidation of propene. The results, supported by electrochemical density functional theory DFT simulations, show that in the potential range of 0.8–1.0 V vs. the reversible hydrogen electrode (RHE), selective oxidation of propene to acrolein and acrylic acid occurs on the metallic Pd surface. Here, these reactions are proposed to proceed via the Langmuir–Hinshelwood mechanism. In contrast, for the potential range of 1.1–1.3 V vs. RHE, selective oxidation of propene to propylene glycol takes place on a Pd oxide surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enabling electrochemical N 2 reduction to NH 3 in the low overpotential region using non-noble metal Bi electrodes via surface composition modification

The electrochemical N 2 reduction reaction (ENRR) that can produce NH 3 using water as the hydrogen source at ambient temperature and pressure can be an exciting alternative to the Haber–Bosch process. The major challenge for electrochemical NH 3 production is the competing hydrogen evolution reaction (HER), which seriously limits the faradaic efficiency (FE) for NH 3 production. To date, noble metal electrocatalysts that are inactive for the HER have mainly been investigated for the ENRR. Studies reporting a FE greater than 10% for NH 3 production using non-noble metal catalysts in the low overpotential region (E ≤ 0.2 V vs. RHE) are very rare. This study reports effective electrochemical surface modification strategies that drastically increase the ENRR activity of a non-noble Bi electrode in the low overpotential region and achieve a FE for NH 3 production as high as 13.2% at -0.2 V vs. RHE in pH 7.5 phosphate buffer. Finally, the effect of each of the surface modifications on the activity for the ENRR and the electrode stability during the ENRR were systematically elucidated, which may be used to develop general strategies to enhance the ENRR activities of other non-noble metal electrodes in the low overpotential region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrocatalytic nitrate reduction on rhodium sulfide compared to Pt and Rh in the presence of chloride

Chloride poisoning is a serious problem for the electrocatalytic reduction of aqueous nitrate (NO 3 – ) and improved electrocatalysts are needed. Here we study the electrocatalytic activity of rhodium sulfide supported on carbon (Rh x S y /C) for the reduction of nitrate and compare it against Pt/C and Rh/C in the presence of chloride. Between 0.05–0.15 V vs. RHE, Rh x S y /C has a steady-state nitrate reduction current density in 1 M H 2 SO 4 + 1 M NaNO 3 that is 1.6–5.6 times greater than Rh/C (the most active metal electrocatalyst) and 10–24 times greater than Pt/C. Current densities are decreased by 37% for Rh x S y /C, 62% for Rh/C, and 40% for Pt/C at 0.1 V vs. RHE in the presence of 1 mM chloride. The decrease in nitrate reduction activity for Pt, Rh, and Rh x S y is due to the competitive adsorption of chloride and nitrate on the surface. Density functional theory (DFT) modeling predicts that chloride poisoning will persistently inhibit nitrate reduction on metals due to linear adsorbate scaling relations between nitrate and chloride. DFT calculations and microkinetic modeling of our experimental measurements predict that nitrate converts to nitrite via an H-assisted dissociation mechanism on Pt and direct nitrate dissociation on Rh and Rh x S y . Pristine Rh x S y (i.e., Rh 3 S 4 , Rh 2 S 3 , and Rh 17 S 15 ) terraces are predicted to be inactive toward nitrate reduction. In contrast, sulfur vacancies in Rh 3 S 4 terraces are predicted to be active for nitrate reduction, but also bind chloride strongly. Furthermore, sulfur-defected Rh 3 S 4 rationalize the experimentally observed high activity but moderate chloride poison-resistance of Rh x S y /C for nitrate reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Planar defect-driven electrocatalysis of CO 2 -to-C 2 H 4 conversion

The selectivity towards a specific C 2+ product, such as ethylene (C 2 H 4 ), is sensitive to the surface structure of copper (Cu) catalysts in carbon dioxide (CO 2 ) electro-reduction. The fundamental understanding of such sensitivity can guide the development of advanced electrocatalysts, although it remains challenging at the atomic level. In this work, we demonstrated that planar defects, such as stacking faults, could drive the electrocatalysis of CO 2 -to-C 2 H 4 conversion with higher selectivity and productivity than Cu(100) facets in the intermediate potential region (–0.50 ~ –0.65 V vs. RHE). The unique right bipyramidal Cu nanocrystals containing a combination of (100) facets and a set of parallel planar defects delivered 67% faradaic efficiency (FE) for C 2 H 4 and a partial current density of 217 mA cm –2 at –0.63 V vs. RHE. In contrast, Cu nanocubes with exclusive (100) facets exhibited only 46% FE for C 2 H 4 and a partial current density of 87 mA cm –2 at an identical potential. Both ex situ CO temperature-programmed desorption and in situ Raman spectroscopy analysis implied that the stronger *CO adsorption on planar defect sites facilitates CO generation kinetics, which contributes to a higher surface coverage of *CO and in turn an enhanced reaction rate of C–C coupling towards C 2+ products, especially C 2 H 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Facets control charge separation during photoelectrochemical water oxidation with strontium titanate (SrTiO 3 ) single crystals

The photocatalytic overall water splitting reaction provides a pathway to hydrogen fuel from sunlight. Photocatalysts must achieve the reaction without the application of an external bias, which requires an effective charge separation mechanism. Photolabeling studies and electrostatic simulations for the well-known CoOOH/Al:SrTiO 3 /Rh/Cr 2 O 3 photocatalyst suggest that charge separation is driven by work function differences at the (100) and (110) facets of SrTiO 3 , which are electron and hole selective, respectively. Here we use hydrogen annealed SrTiO 3–x single crystals to obtain the first quantitative assessment of the charge separation ability of the (100), or (110), or (111) facets during oxygen evolution. Under UV illumination (60 mW cm –2 ), the crystals exhibit variable water oxidation photocurrents (0.34, 0.82, 1.36 mA cm –2 at 1.23 V versus RHE) and photovoltage values of 1.40, 1.52 and 1.52 V for (100), (110), and (111) SrTiO 3–x , respectively. A surface photovoltage increase in that same order (0.31 V < 0.57 V < 0.67 V) is confirmed independently with vibrating Kelvin probe surface photovoltage spectroscopy (VKP-SPV) under 375 nm (1.91 mW cm –2 ) illumination. Mott Schottky measurements in aqueous K 3/4 [Fe(CN) 6 ] reveal facet-dependent flatband positions of –0.58, –0.71, and –0.74 V RHE for the (100), (110), and (111) crystals respectively. This confirms that the photoelectrochemical water oxidation performance of SrTiO 3–x crystals is controlled by the work function of each facet, which determines the electron transfer barrier height of the respective solid–liquid junctions. After correcting for differences in electron donor concentrations, barriers are found to increase in the order (100) < (111) < (110) and differ by as much as 0.16 eV, similar to an earlier prediction. Altogehter, these results explain the charge separation mechanism in SrTiO 3 photocatalysts and highlight the need for faceted semiconductor crystals as light absorbers in particle-based photocatalysts.

08 HYDROGEN↗
DOE OSTI2025

The electrode–electrolyte interface of Cu via modulation excitation X-ray absorption spectroscopy

The development and application of modulation excitation X-ray absorption spectroscopy with sub-second resolution and better than 0.02% detection sensitivity unveils the kinetics of the anodic oxidation of Cu in bicarbonate electrolytes. Accessing the electrode–electrolyte interface under operating conditions and capturing time-resolved kinetics remain challenging in electrochemical studies. Copper's interfacial oxidation dynamics remain unclear despite extensive research. Modulation excitation X-ray absorption spectroscopy (ME-XAS) was used to probe Cu in 100 mM KHCO 3 with sub-second sensitivity, revealing that hydroxide forms 30 ± 10 ms before the appearance of Cu 2 O at positive potentials (0 to 0.5 V vs. RHE) near open-circuit conditions. From −0.4 to 0.8 V vs. RHE, hydroxide coverage reaches 49%, accompanied by a balanced presence of Cu( i ) and Cu( ii ) oxides. These insights into Cu interfacial redox behavior under intermittent renewable energy operation—relevant to CO 2 electrolyzer durability—enhance our fundamental understanding of electrochemical interfaces.

Garcia-Esparza, Angel T↗
DOE OSTI2024

Anodic Hydrogen Generation from Benzaldehyde on Au, Ag, and Cu: Rotating Ring-Disk Electrode Studies

Aldehydes are selectively oxidized to carboxylates on group 11 metals at low potentials (<0.4 V vs. RHE) in alkaline media. This process can occur by a pathway that generates H 2 gas from the aldehyde, known as electro-oxidative dehydrogenation (EOD) or anodic hydrogen production. The EOD process occurs with transfer of only one electron per aldehyde, whereas typical oxidation with discharge of hydrogen to form water is a two-electron process. Here, we study the catalytic activity and selectivity toward H 2 of Au, Ag, and Cu electrodes using benzaldehyde with rotating disk and ring-disk electrode (RDE/RRDE) techniques. The average number of electrons per benzaldehyde molecule obtained via H 2 detection by RRDE agrees with that obtained via Koutecký-Levich analysis conducted at various rotation rates. We find that Au and Ag have much higher H 2 and benzoate formation rates than Cu, but that Cu can perform the reaction at about 0.2 V lower overpotentials. On all three materials, benzaldehyde oxidation has high selectivity to anodic H 2 (one-electron pathway) below ∼0.5 V vs. RHE, but, with increasing potential, the selectivity shifts to H-oxidation forming water (two-electron pathway).

Ramos, Nathanael C. (ORCID:0000000247210350)↗
DOE OSTI2021

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 1a Raw Data

10 hours chronoamperometry (CA) testing under 1 sun illumination and constant bias at -0.6 V vs RHE, the corresponding Faradaic efficiency reveals a self-improving nature of GaN, inset: CA testing on bare Si for 5 hours under 1 sun illumination and -0.6 V vs RHE, this bare Si photocathode rapidly drops down to < 0.05 mA/cm2 within an hour. Both CA testing performed in 0.5 M H2SO4 (pH=0.4).

photocathode↗