Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RFI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Adaptive linear predictor FIR filter based on the Cyclone V FPGA with HPS to reduce narrow band RFI in AERA radio detection of cosmic rays

We present the new approach to a filtering of radio frequency interferences (RFI) in the Auger Engineering Radio Array (AERA) which study the electromagnetic part of the Extensive Air Showers. The radio stations can observe radio signals caused by coherent emissions due to geomagnetic radiation and charge excess processes. AERA observes frequency band from 30 to 80 MHz. This range is highly contaminated by human-made RFI. In order to improve the signal to noise ratio RFI filters are used in AERA to suppress this contamination. The first kind of filter used by AERA was the Median one, based on the Fast Fourier Transform (FFT) technique. The second one, which is currently in use, is the infinite impulse response (IIR) notch filter. The proposed new filter is a finite impulse response (FIR) filter based on a linear prediction (LP). A periodic contamination hidden in a registered signal (digitized in the ADC) can be extracted and next subtracted to make signal cleaner. The FIR filter requires a calculation of n=32, 64 or even 128 coefficients (dependent on a required speed or accuracy) by solving of n linear equations with coefficients built from the covariance Toeplitz matrix. This matrix can be solved by the Levinson recursion, which is much faster than the Gauss procedure. The filter has been already tested in the real AERA radio stations on Argentinean pampas with a very successful results. The linear equations were solved either in the virtual soft-core NIOSR processor (implemented in the FPGA chip as a net of logic elements) or in the external Voipac PXA270M ARM processor. The NIOS processor is relatively slow (50 MHz internal clock), calculations performed in an external processor consume a significant amount of time for data exchange between the FPGA and the processor. Test showed a very good efficiency of the RFI suppression for stationary (long-term) contaminations. However, we observed a short-time contaminations, which could not be suppressed either by the IIR-notch filter or by the FIR filter based on the linear predictions. For the LP FIR filter the refreshment time of the filter coefficients was to long and filter did not keep up with the changes of a contamination structure, mainly due to a long calculation time in a slow processors. We propose to use the Cyclone V SE chip with embedded micro-controller operating with 925 MHz internal clock to significantly reduce a refreshment time of the FIR coefficients. The lab results are promising. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

System design of the ATS-F RFI measurement experiment.

Description of the system design of an RFI measurement experiment regarding optimal sharing of the 5.925- to 6.425-GHz frequency band between the ATS-F synchronous satellite and terrestrial telecommunication systems. The parametric measurements made will include transmitted and received power levels, propagation-path loss and variations as a function of range, elevation angle, RF polarization, and geographical location of interference sources. The technical objectives of the C-band RFI experiment are outlined, a functional diagram of the total system for the RFI measurement experiment is presented, and the design features of the receiver RF and IF circuits, the filters and detectors, and the computer control are summarized. A basic RFI measurement plan is presented which defines and briefly states the measurement procedure, which involves a number of different measurement modes, each of which is described in detail.

Henry, V. F.↗

Preliminary assessment of RFI impacts on TDRSS in the 2- to 2.3 GHz band

A study was conducted of the radio frequency bands and radio frequency interference (RFI) impacts on the TDR satellite. Quick look evaluations were performed on RFI conditions in the 136 to 138 MHz and 400.5 to 401.5 MHz bands. An approximate chronological account of the investigations and the intermediate findings are presented. The preliminary results of RFI evaluations in the nominally 2 to 2.3 GHz band. An analysis of the time interaction of user satellites with microwave radio-relay type communications beams as a source of RFI is included.

Lyttle, J. D.↗

RFI receiver

An S-band radio frequency interference (RFI) receiver to analyze and identify sources of RFI problems in the Deep Space Network DSN tracking stations is described. The RFI receiver is a constant gain, double conversion, open loop receiver with dual sine/cosine channel outputs, providing a total of 20 MHZ monitoring capability. This receiver is computer controlled using a MODCOMP II miniprocessor. The RFI receiver has been designed to operate at a 150 Kelvin system noise temperature accomplished by cascading two low noise field effect transistor (FET) amplifiers for the receiver front-end. The first stage low noise FET amplifier is mounted at the feed horn to minimize any cable losses to achieve a lower system noise temperature. The receiver is tunable over the frequency range of 2150 to 2450 MHz in both sine/cosine output channels with a resolution of 100 kHz.

Lay, R.↗

The impact of pulsed RFI on the coded BER performance of the nonlinear satellite communication channel

An examination is conducted of the coded bit error rate (BER) performance of a satellite communication system in which binary phase-shift-keyed (BPSK) modulation is employed, pulsed CW or pulsed noise RFI is present, and the transponder contains a nonlinearity characterized by arbitrary AM/AM and AM/PM characteristics; the RFI pulse duration is further assumed to exceed that of the information symbol. Computed performance curves consider several hypothetical RFI scenarios in which either a hard limiter or an 8 dB clipper represent the transponder amplitude nonlinearity. Results demonstrate the potential seriousness of RFI duty cycles as low as 2 percent, and the fact that CW represents the most severe form of interference.

Weinberg, A.↗

SMAP RFI Change Detection

The Soil Moisture Active Passive (SMAP) mission, launched on January 31, 2015, has completed its primary 3-year mission and is currently in its extended mission. Although operation occurs within the protected frequency allocation of 1400-1427 MHz, the SMAP radiometer is impacted by radio frequency interference (RFI). The radiometer was designed to provide detection and filtering of RFI in order to meet error budget requirements. A time series algorithm was developed to monitor, detect and report the changing environment with the objective of detecting new RFI sources as well as existing persistent sources. The detection of sources are used in RFI reporting to NASA spectrum management with the hope that interfering sources will be turned off by the necessary administrations.

Priscilla N Mohammed↗

Sources of L-Band RFI Determined From Kurtosis Using the SMAP Radiometer

Among the parameters of the signal measured by the SMAP radiometer to identify RFI is kurtosis which indicates the departure of the received signal from a gaussian distribution and therefor helpful in identifying RFI. But the kurtosis has the potential to provide additional information. This manuscript reports results of an investigation examining the connection between the level of kurtosis (K) and the characteristics of the source of the RFI. It is shown, for example, that the level of can be used to distinguish the short pulse, relatively wideband RFI associated with radar from the narrow bandwidth signals associated with faulty consumer electronics.

Radio Frequency Interference↗

Development of RFI Mitigation Techniques with Digital Beamforming

Remote sensing radars with longer wavelengths penetrate deeper into the observed scene and are more suitable for the scientific observation of ice sheets or vegetation. Therefore, SAR systems are moving to lower frequencies like L- or P-band. However, as the frequency spectrum is a limited resource, this means that the occupied frequency band has to be shared with existing users. These users can have serious impact on the imaging quality. Radio frequency interference (RFI) that arrives at the antenna together with the SAR backscatter is causing a drop of the signal-to-noise ratio. Despite the high processing gain of the SAR signal, artifacts can appear in the image if the RFI is strong enough. This can lead to a corruption of the acquired data and make it unsuitable for scientific purposes. Hence, the investigation of methods for RFI mitigation is critical to the performance of radar missions and to ensure they meet their main task.

Digital Beamforming↗

Summary of Responses to the Request for Information (RFI) on Partnerships for Transformational Artificial Intelligence Models

The Department of Energy (DOE) issued a Request for Information (RFI) in December 2025 inviting public comments regarding partnerships for transformational Artificial Intelligence (AI) models for the Genesis Mission Consortium, a public-private partnership platform. This RFI solicited feedback from industry, nonprofit organizations, universities, independent research organizations and other stakeholders. Specifically, the RFI asked three questions on (1) mobilizing DOE National Laboratories to curate the scientific data in a responsible and privacy-preserving manner, (2) the extent to which existing general-purpose AI models can be leveraged and which scientific disciplines are priorities for such model development, and (3) mechanisms by which these AI models can be provided to scientific communities. This document summarizes the input from 194 unique nonproprietary responses from businesses, universities, nonprofit organizations, research institutes and laboratories as well as a variety of other contributors, including individual contributions.

97 MATHEMATICS AND COMPUTING↗

RFI analysis applied to the TDRSS system

The effect of radio frequency interference (RFI) on the proposed Tracking and Data Relay Satellite System (TDRSS) was assessed. The method of assessing RFI was to create a discrete emitter listing containing all the required parameters of transmitters in the applicable VHF and UHF frequency bands. The transmitter and spacecraft receiver characteristics were used to calculate the RFI contribution due to each emitter. The individual contributions were summed to obtain the total impact in the operational bandwidth. Using an as yet incomplete emitter base, it is concluded that the 136- to 137-MHz band should be used by TDRSS rather than the whole 136- to 138-MHz band because of the higher interference levels in the 137- to 138 MHz band. Even when restricting the link to 136 to 137 MHz, the existing link design is marginal, and it is recommended that interference reduction units, such as the adaptive digital filter, be incorporated in the TDRSS ground station.

Jenny, J. A.↗

RFI simulation definition study, exhibit D

Comparative analyses of experimental and predicted effects of the radio frequency interference (RFI) environment on the Shuttle/TDRSS S-band links were performed. Specifications are defined ad ESTL test requirements are presented. Procedures for using the RFI test generator in the ESTL S-band link tests are presented and performance predictions for these links in the RFI environment are provided.

Braun, W. R.↗

The impact of pulsed RFI on the coded BER performance of the nonlinear satellite communication channel

Communication links from low orbiting spacecraft to a central ground station, via satellite repeater, may be susceptible to significant performance degradation if high-level, pulsed radio frequency interference (RFI) must be contended with. The present paper examines the coded bit error rate (BER) performance of a communication system in which BPSK modulation is employed, pulsed CW or pulsed noise RFI is present, and the transponder contains a nonlinearity characterized by arbitrary AM/AM and AM/PM characteristics. A major result of this paper is an analytic method for determining soft decision statistics of the receiver demodulator output, in which pulsed RFI effects are accounted for. It is demonstrated that this result can be analytically applied to the approximate determination of the BER at the output of a Viterbi decoder, when convolutional coding is employed.

Weinberg, A.↗

Mitigation of pulsed RFI via automatic gain control

Three automatic gain control (AGC) strategies and their potential capabilities for mitigation of pulsed radio frequency interference (RFI) over a coded, nonlinear channel are examined. The first updates the AGC control voltage once each symbol interval in accordance with a prespecified criterion. The second implementation is designed to first detect high level RFI and then appropriately update its gain. The final implementation is a wideband device which updates its gain once each symbol interval by reducing the gain in direct proportion to a suitable power measurement. Computed results treat pulsed noise and pulsed CW RFI and compare performances in terms of bit error rate (BER) at the output of a Viterbi decoder.

Chang, R. W.-S.↗

An RFI Detection Algorithm for Microwave Radiometers Using Sparse Component Analysis

Radio Frequency Interference (RFI) is a threat to passive microwave measurements and if undetected, can corrupt science retrievals. The sparse component analysis (SCA) for blind source separation has been investigated to detect RFI in microwave radiometer data. Various techniques using SCA have been simulated to determine detection performance with continuous wave (CW) RFI.

radiometers↗

An RFI Detection Algorithm for Microwave Radiometers Using Sparse Component Analysis

Radio Frequency Interference (RFI) is a threat to passive microwave measurements and if undetected, can corrupt science retrievals. The sparse component analysis (SCA) for blind source separation has been investigated to detect RFI in microwave radiometer data. Various techniques using SCA have been simulated to determine detection performance with continuous wave (CW) RFI.

radiometers↗

Detection of Residual “Hot Spots” in RFI-Filtered SMAP Data

Radio frequency interference (RFI) is a well-documented problem for passive remote sensing of the Earth at L-band even though the measurements are made in the protected band at 1.413 GHz. Consequently, filtering for RFI is an important early step in the processing of measurements made by the SMAP (Soil Moisture Active/Passive) radiometer. However, the filtered data still include regions with suspiciously high antenna temperatures. One possible cause of these “hot spots” is interference not fully detected during RFI filtering. This paper presents evidence supporting this hypothesis and describes an algorithm to identify these “hot spots” so that they can be removed from the measurements. The impact of removing these “hot spots” is generally small, but evidence is presented that the brightness temperature and soil moisture improve when the hot spots are removed.

Soldo, Yan↗

Study of a Strong RFI Source at L-Band Using SMAP Radiometer Data

This paper presents an analysis of Radio Frequency Interference (RFI) in the 1.400-1.427 GHz frequency band. The study considers the sudden and strong increase of interference from a particular emitter in China that has been observed in July 2020 by radiometers from both ESA's SMOS (Soil Moisture Ocean Salinity) and NASA's SMAP (Soil Moisture Active Passive) missions. It provides an example of the characterization of a source of RFI and illustrates the capabilities of the SMAP radiometer receiver and RFI processing incorporated in it to identify and understand interference.

Radio Frequency Interface↗

A Case Study in RFI at L-band Detected by SMAP

Even when radio frequency interference (RFI) is detected, very little is known about the sources of the interference. More information about the sources would facilitate the design of systems to deal with the interference. Reporting of interference by the RFI teams for SMAP and SMOS through international channels has resulted in a decrease in RFI and identification of several sources. Two such cases that have been identified in the USA and are reported here.

Radiometry↗