Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RANGE MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Geophysical interpretation of satellite laser ranging measurements of crustal movement in California

As determined by satellite laser ranging the rate of contraction of a 900 kilometer baseline between sites located near Quincy in northern California and San Diego in southern California is about 61 to 65 mm/yr with a formal uncertainty of about 10 mm/yr. The measured changes in baseline length are a manifestation of the relative motion between the North America and Pacific tectonic plates. This long baseline result is compared to measurements made by more conventional means on shorter baselines. Additional information based on seismicity, geology, and theoretical modelling is also analyzed. Deformation lying within a few tens of kilometers about the major faults in southern California accounts for most, but not all of the observed motion. Further motion is attributable to a broader scale deformation in southern California. Data suggesting crustal movements north of the Garlock fault, in and near the southern Sierra Nevada and local motion at an observatory are also critically reviewed. The best estimates of overall motion indicated by ground observations lie between 40 and 60 mm/yr. This lies within one or two standard deviations of that deduced by satellite ranging but the possibility of some unresolved deficit cannot be dismissed. The long time scale RM2 plate tectonic model of Minster and Jordan predicts a contraction between 47 and 53 mm/yr depending on the extension rate of the Basin and Range. Thus the ground based observations, satellite laser ranging (SLR) results, and RM2 rates differ at about the 10 mm/yr level and are consistent with one another within the data and model uncertainties.

Cohen, S. C.↗
NASA NTRS1997

Application of the Two-Step Filter to Process Ranging Measurements for Relative Navigation in an Elliptical Orbit

This estimator breaks a nonlinear estimation problem into a set of over determined 'first step' states which are linear in the observations and 'second step' states which are ultimately the states of interest. Linear estimation methods are applied to filter the observations and produce the optimal first step state estimate. The 'second step' states are obtained through iterative nonlinear parameter estimation considering the first step states as observations. It has been shown that this process exactly minimizes the least squares cost function for static problems and provides a better solution than the iterated extended Kalman filter (EKF) for dynamic problems. The two step filter is applied in this paper to process range and range rate measurements between the two spacecraft. Details of the application of the two step estimator to this problem will be given, highlighting the use of a test for ill-conditioned covariance estimates that can result from the first order covariance propagation. A comparison will be made between the performance of the two step filter and the IEKF.

Garrison, James L.↗
NASA NTRS1992

Receiver performance of laser ranging measurements between the Lunar Observer and a subsatellite for lunar gravity studies

The optimal receiver for a direct detection laser ranging system for slow Doppler frequency shift measurement is shown to consist of a phase tracking loop which can be implemented approximately as a phase lock loop with a 2nd or 3rd order loop filter. The laser transmitter consists of an AlGaAs laser diode at a wavelength of about 800 nm and is intensity modulated by a sinewave. The receiver performance is shown to be limited mainly by the preamplifier thermal noise when a silicon avalanche photodiode is used. A high speed microchannel plate photomultiplier tube is shown to outperform a silicon APD despite its relatively low quantum efficiency at wavelengths near 800 nm. The maximum range between the Lunar Observer and the subsatellite for lunar gravity studies is shown to be about 620 km when using a state-of-the-art silicon APD and about 1000 km when using a microchannel plate photomultiplier tube in order to achieve a relative velocity measurement accuracy of 1 millimeter per second. Other parameters such as the receiver time base jitter and drift also limit performance and have to be considered in the design of an actual system.

Davidson, Frederic M.↗
NASA NTRS1964

Ultra-sensitive transducer advances micro-measurement range

An ultrasensitive piezoelectric transducer, that converts minute mechanical forces into electrical impulses, measures the impact of micrometeoroids against space vehicles. It has uniform sensitivity over the entire target area and a high degree of stability.

Rogallo, V. L.↗
NASA NTRS1992

Trial of a slant visual range measuring device

Each year, fog at airports renders some landing operations either difficult or impossible. The visibility that a pilot of a landing aircraft can expect is in that case the most important information. It could happen that the visibility versus the altitude is constantly decreasing or increasing. However, it is not possible to distinguish this with the existing sensors at an airport. If the visibility is decreasing with the altitude, one has the worst case - ground fog. The standard visibility sensor, the transmissometer, determines only the horizontal visual range, which will be underestimated in comparison with the real visibility a pilot has on his landing approach. Described here is a new technique to measure the slant visual range, making use of a slant scanning device - an eye-safe laser radar. A comparison with commercial visibility sensors shows that it is possible to measure visibilities with the slant looking laser radar in the range from 50 meters up to 2000 meters and even distinguish inhomogenities like ground fog.

Streicher, J.↗
NASA NTRS1995

Variation of fractional electron density fluctuations inside 40 R(sub 0) observed by Ulysses ranging measurements

The first measurements of fractional electron density fluctuations delta-n(sub e)/n(sub e), where delta-n(sub e) is rms electron density fluctuation and n(sub e) is the mean electron density, have been carried out inside 40 R(sub 0) using 1991 Ulysses dual-frequency S- and X-band (13 and 3.6 cm) ranging (time delay) measurements. In the frequency band of approximately 6 x 10(exp -5) - 8 x 10(exp -4) Hz (periods of 20 min to 5 hr), delta-n(sub e)/n(sub e) varies from a high near 20% in the slow wind close to the neutral line to a low of 1% in the fast wind far from the neutral line. For spatial wavenumber K approximately = 1.4 x 10(exp -6)/km (period of 5 hr at 250 km/s), delta-n(sub e)/n(sub e) is essentially independent of heliocentric distance over 0.03-1.0 AU in the slow wind; it is a factor of 30 lower in the fast wind than in the slow wind inside 0.1 AU, but exhibits dramatic growth with heliocentric distance inside 0.3 AU. This latter result reinforces current views of the evolution of MHD turbulence and the association of Alfven waves with high speed streams based on in situ fields and particles measurements beyond 0.3 AU. That regions of enhanced density fluctuations near or above the neutral line coincide with regions of enhanced density confirms previous conclusions that they are the interplanetary manifestation of the heliospheric current sheet and extensions of coronal streamers. While the regions of enhanced density fluctuations lie within those of enhanced density, they have boundaries that are distinctly more abrupt, suggesting the separation of plasma of different nature and origin.

Woo, Richard↗
NASA NTRS1961

Ballistic Range Measurements of Stagnation-Point Heat Transfer in Air and in Carbon Dioxide at Velocities up to 18,000 Feet Per Second

A new technique for measuring heat-transfer rates on free-flight models in a ballistic range is described in this report. The accuracy of the heat-transfer rates measured in this way is shown to be comparable with the accuracy obtained in shock-tube measurements. The specific results of the present experiments consist of measurements of the stagnation-point heat-transfer rates experienced by a spherical-nosed model during flight through air and through carbon dioxide at velocities up to 18,000 feet per second. For flight through air these measured heat-transfer rates agree well with both the theoretically predicted rates and the rates measured in shock tubes. the heat-transfer rates agree well with the rates measured in a shock tube. Two methods of estimating the stagnation-point heat-transfer rates in carbon dioxide are compared with the experimental measurements. At each velocity the measured stagnation-point heat-transfer rate in carbon dioxide is about the same as the measured heat-transfer rate in air.

Yee, Layton↗
NASA NTRS2006

Range-Measuring Video Sensors

Optoelectronic sensors of a proposed type would perform the functions of both electronic cameras and triangulation- type laser range finders. That is to say, these sensors would both (1) generate ordinary video or snapshot digital images and (2) measure the distances to selected spots in the images. These sensors would be well suited to use on robots that are required to measure distances to targets in their work spaces. In addition, these sensors could be used for all the purposes for which electronic cameras have been used heretofore. The simplest sensor of this type, illustrated schematically in the upper part of the figure, would include a laser, an electronic camera (either video or snapshot), a frame-grabber/image-capturing circuit, an image-data-storage memory circuit, and an image-data processor. There would be no moving parts. The laser would be positioned at a lateral distance d to one side of the camera and would be aimed parallel to the optical axis of the camera. When the range of a target in the field of view of the camera was required, the laser would be turned on and an image of the target would be stored and preprocessed to locate the angle (a) between the optical axis and the line of sight to the centroid of the laser spot.

Howard, Richard T.↗
NASA NTRS1991

Mars approach navigation using Doppler and range measurements to surface beacons and orbiting spacecraft

Approximate analytical models are developed and used to construct an error covariance analysis for investigating the range of orbit determination accuracies which might be achieved for typical Mars approach trajectories. The sensitivity or orbit determination accuracy to beacon/orbiter position errors and to small spacecraft force modeling errors is also investigated. The results indicate that the orbit determination performance obtained from both Doppler and range data is a strong function of the inclination of the approach trajectory to the Martian equator, for surface beacons, and for orbiters, the inclination relative to the orbital plane. Large variations in performance were also observed for different approach velocity magnitudes; Doppler data in particular were found to perform poorly in determining the downtrack (along the direction of flight) component of spacecraft position. In addition, it was found that small spacecraft acceleration modeling errors can induce large errors in the Doppler-derived downtrack position estimate.

Thurman, Sam W.↗
NASA NTRS2008

Video sensor with range measurement capability

A video sensor device is provided which incorporates a rangefinder function. The device includes a single video camera and a fixed laser spaced a predetermined distance from the camera for, when activated, producing a laser beam. A diffractive optic element divides the beam so that multiple light spots are produced on a target object. A processor calculates the range to the object based on the known spacing and angles determined from the light spots on the video images produced by the camera.

Briscoe, Jeri M.↗
NASA NTRS1994

Determination of the extragalactic-planetary frame tie from joint analysis of radio interferometric and lunar laser ranging measurements

Very Long Baseline Interferometry (VLBI) observations of extragalactic radio sources provide the basis for defining an accurate non-rotating reference frame in terms of angular positions of the sources. Measurements of the distance from the Earth to the Moon and to the inner planets provide the basis for defining an inertial planetary ephemeris reference frame. The relative orientation, or frame tie, between these two reference frames is of interest for combining Earth orientation measurements, for comparing Earth orientation results with theories referred to the mean equator and equinox, and for determining the positions of the planets with respect to the extragalactic reference frame. This work presents an indirect determination of the extragalactic-planetary frame tie from a combined reduction of VLBI and Lunar Laser Ranging (LLR) observations. For this determination, data acquired by LLR tracking stations since 1969 have been analyzed and combined with 14 years of VLBI data acquired by NASA's Deep Space Network since 1978. The frame tie derived from this joint analysis, with an accuracy of 0.003 sec, is the most accurate determination obtained so far. This result, combined with a determination of the mean ecliptic (defined in the rotating sense), shows that the mean equinox of epoch J2000 is offset from the x-axis of the extragalactic frame adopted by the International Earth Rotation Service for astrometric and geodetic applications by 0.078 sec +/- 0.010 sec along the y-direction and y 0.019 sec +/- 0.001 sec. along the z-direction.

Folkner, W. M.↗
NASA NTRS1972

Ballisistic range measurements of the drag and static and dynamic stability of a recoverable space shuttle booster vehicle

An experimental study has been conducted to determine the aerodynamic characteristics of a proposed recoverable space shuttle booster vehicle. Tests were made at Mach numbers of 0.7, 1.5, and 3.5 of two configurations, one with tail panels deflected 90 deg and one with tail panels deflected 70 deg. Both configurations were found to be highly statically stable at all Mach numbers. The dynamic behavior was erratic; the models exhibited both neutral dynamic stability and dynamic instability, and the motions experienced during free flight at the subsonic Mach number were very irregular. The flow field over the models was characterized by an extensive separated flow region which largely encompassed the tail panels. The experimental drag and static stability were not well predicted by available theoretical estimates.

Intrieri, P. F.↗