Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADOME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Forebody flow control on a full-scale F/A-18 aircraft

A full-scale F/A-18 was tested in the 80- by 120-Foot Wind Tunnel at NASA Ames Research Center to measure the effectiveness of pneumatic forebody vortex control devices. By altering the forebody vortex flow, yaw control can be maintained to angles of attack greater than 50 deg. Two forebody vortex control devices were tested: a discrete circular jet and a tangential slot. The tests were conducted for angles of attack between 25 and 50 deg, and angles of sideslip from 0 to +/- 15 deg. The Reynolds number based on wing mean aerodynamic chord ranged from 4.5 x 10 exp 6 to 12.0 x 10 exp 6. The time-averaged side forces and yawing moments, along with both time-averaged and time-dependent pressures on the forebody of the aircraft are presented here for various configurations. Of particular interest was the results that the tangential slot blowing had a greater effect on the yawing moment than the discrete circular jet. Additionally, it was found that blowing very close to the radome apex was not as effective as blowing slightly farther aft on the radome, and that a 16-inch slot was more effective than either an 8- or 48-inch long slot.

Lanser, Wendy R.↗
NASA NTRS1994

Wind tunnel measurements on a full-scale F/A-18 with a tangentially blowing slot

A full-scale F/A-18 was tested in the 80 by 120-Foot Wind Tunnel at NASA Ames Research Center to measure the effectiveness of a tangentially blowing slot in generating significant yawing moments while minimizing coupling in the pitch and roll axes. Various slot configurations were tested to determine the optimum configuration. The test was conducted for angles of attack from 25 to 50 deg, angles of sideslip from -15 to +15 deg, and freestream velocities from 67 ft/sec to 168 ft/sec. By altering the forebody vortex flow, yaw control was maintained for angles of attack up to 50 deg. Of particular interest was the result that blowing very close to the radome apex was not as effective as blowing slightly farther aft on the radome, that a 16-inch slot was more efficient, and that yawing moments were generated without inducing significant rolling or pitching moments.

Lanser, Wendy R.↗
NASA NTRS1994

Controlling forebody asymmetries in flight: Experience with boundary layer transition strips

The NASA Dryden Flight Research Center has an ongoing program to investigate aircraft flight characteristics at high angles of attack. As part of this investigation, longitudinal boundary layer transition strips were installed on the F-18 HARV forebody, a preproduction F/A-18 radome with a nose-slice tendency, and the X-31 aircraft forebody and noseboom to reduce asymmetric yawing moments at high angles of attack. The transition strips were effective on the F-18 HARV at angles of attack above 60 deg. On the preproduction F/A-18 radome at an angle of attack near 50 deg the strips were not effective. When the transition strips were installed on the X-31 noseboom, a favorable effect was observed on the yawing moment dynamics but the magnitude of the yawing moment was not decreased.

David F Fisher↗
NASA NTRS2001

Comparison of Profiling Microwave Radiometer, Aircraft, and Radiosonde Measurements From the Alliance Icing Research Study (AIRS)

Measurements from a profiling microwave radiometer are compared to measurements from a research aircraft and radiosondes. Data compared is temperature, water vapor, and liquid water profiles. Data was gathered at the Alliance Icing Research Study (AIRS) at Mirabel Airport outside Montreal, Canada during December 1999 and January 2000. All radiometer measurements were found to lose accuracy when the radome was wet. When the radome was not wetted, the radiometer was seen to indicate an inverted distribution of liquid water within a cloud. When the radiometer measurements were made at 15 deg. instead of the standard zenith, the measurements were less accurate.

Reehorst, Andrew L.↗
NASA NTRS1990

Versatile Coating

A radome at Logan Airport and a large parabolic antenna at the Wang Building in Massachusetts are protected from weather, corrosion and ultraviolet radiation by a coating, specially designed for antennas and radomes, known as CRC Weathertite 6000. The CRC 6000 line that emerged from Boyd Coatings Research Co., Inc. is a solid dispersion of fluorocarbon polymer and polyurethane that yields a tough, durable film with superior ultraviolet resistance and the ability to repel water and ice over a long term. Additionally, it provides resistance to corrosion, abrasion, chemical attacks and impacts. Material can be used on a variety of substrates, such as fiberglass, wood, plastic and concrete in addition to steel and aluminum. In addition Boyd Coatings sees CRC 6000 applicability as an anti-icing system coated on the leading edge of aircraft wings.

Source record↗
NASA NTRS1965

The Goonhilly 85-ft. steerable dish aerial

The choice of the basic type of aerial for a satellite communication ground station is of major importance in view of its influence on the overall performance, cost and time to complete the installation. In the case of the Post Office satellite communication earth station at Goonhilly Downs, Cornwall, a decision was made early in 1961 to use an 85-ft diameter steerable paraboloidal dish aerial, without a radome for tests with the Telstar and Relay, and other communication satellites. Tests with smaller paraboloidal dish aerials with the feed in the aperture plane had shown that a satisfactory electrical performance could be obtained, and experience with the 250-ft diameter radio telescope at Jodrell Bank had shown that the mechanical problems could be overcome. An important factor in the present case was the limited time--less than one year--available for the design, manufacture, construction and testing of the aerial.

COMMUNICATIONS SATELLITE↗
NASA NTRS1973

High performance S-band horn antennas for radiometer use

Horn antennas of four types: pyramidal corrugated, conical corrugated, pyramidal dual mode and conical dual mode, have been constructed and evaluated for use as S-band radiometer antennas. Each of the structures is described and radiation patterns and impedance and resistive loss measurements including a layer of foreign material on a thin radome, are presented. A precision method for determining reflection losses is described using a multiprobe reflectometer technique. The same technique is also applied to the measurement of resistive losses by closing the ends of the antennas with short circuit plates and determining the losses from an accurate measurement of the reflection coefficient. The radiation patterns were recorded with the aid of a real-time digital computer. The stored patterns were then processed to yield gain and beam efficiency. It was concluded that it is possible to design a highly efficient antenna for radiometer use and to measure its parameters precisely. However, it was found that it is necessary to modify the conventional definition of beamwidth somewhat if this term is to be meaningful for radiometer applications.

Caldecott, R.↗
NASA NTRS1974

Holographic nondestructive tests performed on composite samples of ceramic-epoxy-fiberglass sandwich structure

When a hologram storing more than one wave is illuminated with coherent light, the reconstructed wave fronts interfere with each other or with any other phase-related wave front derived from the illuminating source. This multiple wave front comparison is called holographic interferometry, and its application is called holographic nondestructive testing (HNDT). The theoretical aspects of HNDT techniques and the sensitivity of the holographic system to the geometrical placement of the optical components are briefly discussed. A unique HNDT system which is mobile and possesses variable sensitivity to stress amplitude is discribed, the experimental evidence of the application of this system to the testing of the hidden debonds in a ceramic-epoxy-fiberglass structure used for sample testing of the radome of the Pershing missile system is presented.

Kurtz, R. L.↗
NASA NTRS1975

MLS airborne antenna research

The geometrical theory of diffraction was used to analyze the elevation plane pattern of on-aircraft antennas. The radiation patterns for basic elements (infinitesimal dipole, circumferential and axial slot) mounted on fuselage of various aircrafts with or without radome included were calculated and compared well with experimental results. Error phase plots were also presented. The effects of radiation patterns and error phase plots on the polarization selection for the MLS airborne antenna are discussed.

Yu, C. L.↗
NASA NTRS1976

Analysis of synthetic aperture radar imagery

The author has identified the following significant results. Average radar response for L-band like polarized system appeared to be related to the watershed runoff coefficients when the viewing angle was approximately 42 deg off nadir. Four requirements for radar systems used to verify applications of active microwave for water resources were identified: (1) first generation digital data will be required; (2) radar should be calibrated both internally and externally; (3) new systems should avoid radom use; and (4) images should be geometrically rectified prior to delivery to the user.

Blanchard, B. J.↗
NASA NTRS1976

The high-power X-band planetary radar at Goldstone - Design, development, and early results

Selected critical microwave components for a 400-kW very-long-pulse (several hours) X-band radar system are discussed from theoretical and practical viewpoints. Included are the special-sized waveguide and flanges, hybrid power combiner, couplers, switches, polarizer, rotary joints, feedhorn, and radome. The system is installed on the National Aeronautics and Space Administration/Jet Propulsion Laboratory 64-m-diam reflector antenna at Goldstone, CA.

Hartop, R.↗
NASA NTRS1977

Stress analysis of pressure vessel assembly

A radome assembly capable of withstanding large hydrostatic pressures was designed with a sapphire hemisperical dome and a plastic housing. These two parts were connected with a stainless steel flange ring. A finite-element stress analysis of this assembly was accomplished and an experimental load test was performed to verify the predicted stresses.

Eppink, R. T.↗
NASA NTRS1977

Analysis of synthetic aperture radar imagery

Some problems faced in applications of radar measurements in hydrology are: (1) adequate calibration of the radar systems and direct digital data will be required in order that repeatable data can be acquired for hydrologic applications; (2) quantitative hydrologic research on a large scale will be prohibitive with aircraft mounted synthetic aperture radar systems due to the system geometry; (3) spacecraft platforms appear to be the best platforms for radar systems when conducting research over watersheds larger than a few square kilometers; (4) experimental radar systems should be designed to avoid use of radomes; and (5) cross polarized X and L band data seem to discriminate between good and poor hydrologic cover better than like polarized data.

Blanchard, B. J.↗
NASA NTRS1979

Icing testing in the large Modane wind-tunnel on full-scale and reduced scale models

Icing tests on full scale models of parts of aircraft (wings, tailplanes, radome) equipped with actual de-icing systems were carried out in the large Modane wind tunnel of ONERA. For studying icing on the Concorde, it was necessary to use a 1/6 scale half model. The equations governing the relevant parameter ratios to obtain reasonably good similitude water catching and ice accretion are recalled. Despite the inherent limitations of this particular kind of testing, i.e., the impossibility of duplicating both the Mach and Reynolds conditions for the main flow pattern, it is possible to obtain on a reduced scale model a reasonably good representation of icing cloud catching and of the shape of resulting ice accretion.

Charpin, F.↗
NASA NTRS1978

Structures for hypersonic airbreathing tactical missiles

The studies to date were encouraging and indicated that materials were available or could be developed to satisfy scramjet requirements. Some of the more promising materials for the critical components were indicated. This information is summarized as follows : (1) radome - Slip cast fused silica is the current candidate, but others are being investigated. One shortcoming of slip cast fused silica is its susceptability to rain damage. (2) inlet leading edges - A refractory metal with a good oxidation protective coating will be required. Tantalum T222 with a Hafnia coating looks promising. (3) inlet ducts - An uninsulated refractory alloy will be required. Columbium F-85 was the best of those considered for the noncircular ducts. (4) external body - The external body temperatures are sufficiently low to permit the use of super alloys. (5) combustor and nozzle - The pyrolytic graphite/silicon carbide coating is very attractive for use in the combustor and nozzle areas.

Caywood, W. C.↗