SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The gamma-ray emitting radionuclide concentration and decontamination factor results from gamma-ray spectrometry measurements of ATR loop liquid samples by the Radiation Measurements Laboratory (RML) are contained in this report for ATR Cycle 175D from Jan. 23, 2026, to Apr. 26, 2026.
The U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) User Facility operates an X-band Scanning ARM Precipitation Radar (XSAPR) at the North Slope of Alaska (NSA) atmospheric observatory in Utqiaġvik. This radar provides year-round dual-polarization measurements of snow and ice in an arctic environment. Over the past few years, there has been greater focus on the NSA XSAPR, and recent efforts by ARM staff have resulted in quality-controlled, b-level data (Rocque et al. 2026b). This report outlines the processing of the second set of b-level data released for this radar from May 2025 through April 2026 following similar methods from Rocque et al. (2026b).
A case study of an incoming biomass burning aerosol plume at Ascension Island is analyzed for the peak of the 2017 fire season using satellites, reanalysis and in situ observations. Measurements from the Atmospheric Radiation Measurement Mobile Facility 1 reveal an abrupt change from relatively clean conditions (~70 parts per billion by volume of carbon monoxide) to a more polluted state (~150 parts per billion by volume of carbon monoxide). Corresponding changes in aerosol size reveal a broadening of size distributions toward larger optical diameters, consistent with the arrival of aged aerosols. Within a 24 h period, black carbon fraction increases ~500% from ~300 ng m e to ~1500 ng m 3 , while light absorption coefficients increase ~300%. Long-range transport of these aerosols is primarily confined between 2 and 5 km above sea level along the northwesterly trade winds. Our results show that the primary driver of increases in aerosol loading over Ascension Island is an intensification of the St. Helena high-pressure system (anticyclone) that leads to a weakening of trade winds and increases westward transport on its northern flank. A better understanding of the complex interactions between air quality, meteorology and long-range aerosol transport is important for future modeling studies focused on aerosol–cloud–radiation interactions over the open ocean and reducing its associated uncertainties.
Monin-Obukhov similarity theory (MOST) is widely used in numerical weather prediction to model surface fluxes of momentum, heat, and water vapor. However, MOST is based on assumptions of steady state and horizontally homogeneous turbulence that can lead to prediction errors in and around convective storms. To understand the nature of these errors, we used wind and eddy covariance flux measurements from the Atmospheric Radiation Measurement Southern Great Plains Atmospheric Observatory to evaluate MOST wind profiles in fair-weather and convective storm environments, specifically those of mesoscale convective systems and ordinary thunderstorms. MOST wind profiles agreed well with observations in fair-weather cases, while in convective storm cases the theory systematically overestimated shear in cold pools after gust front passage. Surface layer stability was found to be important in assessing MOST within convective storm environments. The overestimation of wind shear in cold pools suggests the role of non-local fluxes in transferring momentum downward. We discuss reasons for differences and agreement with past studies, and conclude with recommendations to improve prediction of surface winds and fluxes in convective storm simulations.
This effort has examined and quantified aerosol direct radiative effects (DREs) and associated uncertainties at the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plain (SGP) and Tropical Western Pacific (TWP) sites under both clear and all sky conditions by taking advantage of the advanced ARM long-term comprehensive measurements of aerosol, cloud, radiation, and atmospheric state. This effort has filled the knowledge gap in aerosol DREs at the SGP and TWP under all sky conditions based on the ARM observations.
Three photosynthetically active radiation (PAR) measurement instruments were deployed at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s Bankhead National Forest (BNF) observatory, installed on three different instrument towers within the forest. Each of the three instruments comprises an enclosure at the base of the tower, containing a datalogger and internal humidity sensor, connected to external PAR sensors mounted at various heights and vertical orientations on the same tower. PAR sensors measure radiation reaching the sensor with wavelengths from 400-700 nm, per unit area, per unit time, or the photosynthetic photon flux density (PPFD, µmol photons m -2 s -1 ). On the 43-meter tower of BNF supplemental site S10, sensors are located 43 m, 22 m, 10 m, and 5 m from ground level. Downwelling radiation is measured with upward-facing sensors at all heights, and upwelling radiation is measured with downward-facing sensors at 43 m and 5 m. On the two 10-m towers of BNF supplemental sites S13 and S14, upwelling radiation is measured at 8 m and 2 m, and downwelling radiation is measured at 8 m.
Abstract. Surface radiometer data from Ross Island, Antarctica, collected during the austral summer 2015–2016 by the US Department of Energy Atmospheric Radiation Measurement (ARM) program West Antarctic Radiation Experiment (AWARE), are used to evaluate how shortwave and longwave irradiance respond to changing cloud properties as governed by contrasting meteorological regimes. Shortwave atmospheric transmittance is derived from pyranometer measurements, and cloud conservative-scattering optical depth is derived from filter radiometer measurements at 870 nm. With onshore flow associated with marine air masses, clouds contain mostly liquid water. With southerly flow over the Transantarctic Mountains, orographic forcing induces substantial cloud ice water content. These ice and mixed-phase clouds attenuate more surface shortwave irradiance than the maritime-influenced clouds and also emit less longwave irradiance due to colder cloud base temperature. These detected irradiance changes are in a range that can mean onset or inhibition of surface melt over ice shelves. This study demonstrates how basic and relatively low-cost broadband and filter radiometers can be used to detect subtle climatological influences of contrasting cloud microphysical properties at very remote locations.
ESnet’s Watershed Field Science Data Backhaul Campaign is intended to improve the ability to gather data from sensors deployed across the East River and Trail Creek watersheds, with a special focus on the Snodgrass distributed sensor area, the Pumphouse instruments with co-located U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) User Facility Surface Atmosphere Integrated Field Laboratory (SAIL) tethered balloon setup, and the former ARM SAIL campaign’s second ARM Mobile Facility (AMF2) site by the Watershed Function Science Focus Area (WFSFA) program. This program is not funded by ARM, but collaborates with ARM as part of the SAIL campaign, collocated with the WFSFA field sites in Colorado’s East River Watershed.
Resolving radiation transport fields subject to opacity profiles with strong, oscillatory line structure while potentially falling under intermediate optical depth conditions presents a numerical challenge in radiation transport modeling. The Young measure-based homogenization technique formulated by Haut et al. (2017) was investigated as a candidate method for resolving radiation fields under such conditions more accurately. The method was compared against frequently-utilized mean opacity methods as the Rosseland and Planck formulations. In this work, all methods were tested through radiation slab calculations separately comprised of aluminum, copper, and krypton, each for different thermodynamic conditions. Following these offline radiation slab calculations, demonstrations shifted towards the SCEPTRE radiation transport code and, subsequently, the multiphysics ALEGRA code for approximately-coupled radiation-material simulations. Throughout all the simulations shown in this study, for a fixed computational cost, the homogenized method was observed to be more accurate than any of the solutions determined through traditional mean opacity approaches.
Cloud base height (CBH) and cloud base vertical velocity (CBVV) are important variables that impact the overall climate in a region as they influence the formulation, longevity, and evolution of clouds. Retrieval of both parameters have long used ground instrumentation (e.g., Doppler lidar (DL), ground base radar); however, retrieving CBH from satellites is particularly challenging given that space-based instruments only observe cloud tops. In this manuscript, CBH is retrieved using a multi-linear regression equation, while CBVV used a random forests model. Both retrievals combine satellite and numerical weather prediction data. The satellite data used are the Visible Infrared Imaging Radiometer Suite imagery, while measurements of CBH and CBVV include DL and radiosonde data at the Southern Great Plains (SGP) Atmospheric Radiation Measurement observatory. Data from 83 summer days (May-August) in 2018–2021 featuring cumulus clouds forced by solar heating were examined and used to train the models, with years 2022–2023 used for validation. Various spatial domains were defined with one large (2.4° longitude by 2.0° latitude) SGP domain being split into smaller sections (smallest being 0.99° and 0.61° longitude and latitude respectably). CBH and CBVV values obtained from the DL as compared to the models show root mean square errors between 150 and 200 m, with CBVV values between 0.45 and 1 ms -1 . Finally, it was found that the CBH formulation performs well over all domains, while the CBVV retrievals become less accurate due to more turbulence being introduced into the observations as the number of DL stations decreases in the smaller domains.
The Department of Energy’s Hanford and Savannah River Sites maintain millions of gallons of caustic supernate and salt high activity waste in their high-level waste (HLW) tank farm inventories. The Savannah River Site is currently treating this waste with a calixarene-based solvent extraction of Cs-137 to reduce these inventories. Hanford is employing an at-tank crystalline silico titanate (CST) based solid phase extraction methodology to reduce their liquid HLW inventories. Due to the high solubility of Cs-137 and the relative insolubility of the actinides in these caustic waste forms, the beta to alpha radioactivity ratio can often exceed six orders of magnitude in the feed solutions to these treatment processes. This unique characteristic leads to significant technical challenges in making rapid gross alpha measurements in the presence of the overwhelming beta, gamma, as well as dissolved sodium salt in these HLW matrices. Conventional radioanalytical techniques, such as liquid scintillation analysis or gas flow proportional counting require significant radiochemistry preparation prior to the radiometric measurements for gross alpha activity. These required pretreatments render these technologies untenable for rapid quantification of gross alpha activity that could be required to support on or at-line measurements ensuring a waste stream will meet regulatory requirements. The radiation measurement properties of Tensioned Metastable Fluid Detectors (TMFDs) have been studied by Purdue University’s Taleyarkhan research group for well over a decade. Fluids tensioned to the appropriate degree will rupture when struck by radiation, resulting in a measurable cavitation event. The negative pressure generating this tension can be adjusted by centrifugal rotation or by acoustic means in such a way that these cavitation events can be generated from alpha radiation but will not be generated by beta or gamma radiation. Purdue University and the Savannah River National Laboratory are currently collaborating to develop a gamma/beta blind, spectroscopic alpha measurement system based on the Tensioned Metastable Fluid Detector technology to provide a potential solution for performing rapid gross alpha measurements on these high gamma/beta sample matrices. Measurements using the Indirect Drive Acoustically Tensioned Metastable Fluid Detectors developed as part of this collaboration were performed with an alpha emitting radionuclide. Successful determination of gross alpha activity was observed, indicating a potential pathway for rapid gross alpha measurements in remote-handled shielded cells or in process situations requiring online alpha monitoring. Measurements using this system have been conducted on high beta activity solutions, demonstrating the beta blind capability of this system. Measurements are currently underway to test the system’s capability to measure gross alpha activity on Savannah River Site high level waste high Cs-137 samples that have been measured by the SRNL radiochemistry team. This work was supported by the DOE EM Technology Development program.
CAPE-K_ISO deployed a Picarro L-2130 water vapor isotope analyzer to the Kennaook/Cape Grim Baseline Air Pollution Station in northwest Tasmania as a guest instrument within the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s Cloud and Precipitation Experiment at Kennaook (CAPE-K). The project was led by Joseph Galewsky at the University of New Mexico and supported the second ARM Mobile Facility (AMF2) deployment by adding continuous measurements of water vapor mixing ratio, delta-18O, delta-D, and deuterium excess in marine boundary-layer air.
Understanding the mechanisms governing the urban atmospheric environment is critical for informing urban populations about the impacts of climate change and associated mitigation and adaptation measures. The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) was conducted to study the interactions among the earth’s surface, the atmospheric boundary layer (ABL), aerosols, atmospheric composition, clouds, radiation, and precipitation at each experimental site, and to examine how the spatial gradients across the region interact to create the climate conditions in Baltimore. In this activity we performed weekly soundings, alternating between day and night from Kent Island, to get low-frequency, long-term observations of ABL/lower tropospheric thermodynamic structure. However, during the CoURAGE intensive operational period (IOP), we performed high-frequency sampling (2x/day), at times coinciding with CoURAGE IOP soundings at the main site. The short-term, high-frequency sounding information that was launched at 12Z and 18Z was to complement the longer-term data set.
Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for precision measurement of the energies of charged particles, which is being developed by the Project 8 Collaboration to measure the neutrino mass using tritium beta-decay spectroscopy. Project 8 seeks to use the CRES technique to measure the neutrino mass with a sensitivity of 40 meV, requiring a large supply of tritium atoms stored in a multi-cubic meter detector volume. Antenna arrays are one potential technology compatible with an experiment of this scale, but the capability of an antenna-based CRES experiment to measure the neutrino mass depends on the efficiency of the signal detection algorithms. Here, in this paper, we develop efficiency models for three signal detection algorithms and compare them using simulations from a prototype antenna-based CRES experiment as a case-study. The algorithms include a power threshold, a matched filter template bank, and a neural network based machine learning approach, which are analyzed in terms of their average detection efficiency and relative computational cost. It is found that significant improvements in detection efficiency and, therefore, neutrino mass sensitivity are achievable, with only a moderate increase in computation cost, by utilizing either the matched filter or machine learning approach in place of a power threshold, which is the baseline signal detection algorithm used in previous CRES experiments by Project 8.
Oceans cover two-thirds of the Earth and understanding the interactions of aerosols with clouds in these large marine regions requires quantifying the man-made contributions to the budget of cloud-drop forming particles (known as cloud condensation nuclei, or CCN) relative to the non-manmade “baseline” conditions and understanding the meteorology of boundary layer clouds. Modeling studies have shown substantial uncertainties and sensitivities to natural marine CCN sources, meaning that to reduce uncertainties in indirect effects we must be able to better quantify the CCN budget in ocean regions. While models provide important constraints on these uncertainties, actually reducing uncertainties requires substantial observations in open-ocean and coastal regions in order to establish the baseline on which manmade emissions are added. The tropical South Atlantic Ocean is one of the least-sampled regions of the planet, making the comprehensive measurements of the Department of Energy Atmospheric Radiation Measurement Layered Atlantic Smoke Interactions with Clouds (LASIC) campaign provides the longest record of aerosol size distribution measurements from a differential mobility analyzer in a cloud-influenced marine location in the ARM database, with 17 months of ground-based aerosol size distribution measurements. This project addressed the research topic of Aerosol-Cloud Interactions (ACI) by supporting three publications from the LASIC measurements: 1. The ARM measurements were combined with a new value-added technique that was pioneered by the Russell group for quantifying sea salt. This quantification of sea salt uses supermicron scattering measurements for retrieving reasonable sea spray mass concentrations, providing the best-available, observationally-constrained estimate of the sea spray mode properties when supermicron size distribution measurements are not available. 2. The fitted modes of the distribution were used to investigate the signatures of cloud processing for very clean to very smoky aerosol conditions, revealing not only differences in the particles that activate in clouds but also in the mechanisms that control that droplet formation process. In clean air, the size required to form a cloud droplet is influenced by the number of particles, as well as how quickly particles take up water during growth in cloud. 3. Building on this aerosol characterization, cloud and meteorological conditions were used to evaluate aerosol-related changes in cloud albedo and optical depth. We introduced a new method of decomposing the impact of aerosols on clouds known as the Twomey effect by incorporating retrieved supersaturation from two independent sets of observations to constrain the feedback of aerosol particles on cloud properties. The method quantifies the reduction of the Twomey effect at high aerosol concentrations, which has never been explained quantitatively by observations. In addition, the results provide the first direct validation for the conditions observed in the tropical South Atlantic of a parcel-based approach that is embedded in many climate models. Together these findings illustrate how ARM extended field campaigns in stratocumulus-covered regions can be used to constrain ACI processes with direct observations, providing specific radiative effects without models. By making such process-specific constraints available to improve ACI in global climate models, ARM observations play a key role in supporting model development.
Fiber-optic bolometers (FOBs) designed for plasma radiation measurement in magnetically confined fusion environments have been previously developed and tested at the DIII-D tokamak. These FOBs utilize a silicon Fabry–Perot interferometer at the fiber tip for temperature measurement and a gold disk as a radiation absorber. This paper presents recent advancements in the development of FOBs with reduced cooling time constants and enhanced temperature tolerance. We also demonstrate high-temperature operation and report findings from irradiation tests. By incorporating a copper sensor holder as a thermal sink and integrating two closely packed sensor heads into a compact design, the cooling time constants were reduced to ∼100 ms in vacuum, while minimizing uncertainties caused by temperature gradients. The FOBs were subjected to heating at 400 °C for five hours, with no observed degradation in noise performance post-heating. High-temperature operation tests were conducted at ∼220 °C using a 404 nm square-wave modulated laser to simulate the plasma radiation. In addition, four FOBs constructed from copper-coated pure-silica fibers were fabricated and underwent irradiation testing, enduring a total γ-radiation dose of 15.2 MGy and a neutron fluence of 1.6 × 10 18 n/cm 2 . As a result, the FOBs maintained their physical integrity and the optical signal shows high visibility throughout the test.
The key objectives of this project were to advance our understanding of cloud microphysical characteristics and aerosol indirect effects on mixed-phase clouds in high latitudes. To improve the representation of ice and mixed-phase clouds in Earth System Models (ESMs), we propose an integrated observation and modeling study of cloud macro- and microphysical properties, including spatial heterogeneities, mass partitioning between ice crystals and supercooled liquid water, effects of ice nucleating particles (INPs), and efficiency of secondary ice production (SIP), etc. Specifically, we took four main approaches in this project: (1) examining macro- and microphysical properties of ice and mixed-phase clouds based on in-situ and ground-based observations from multiple field campaigns funded by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program, including the Mixed-Phase Arctic Cloud Experiment (M-PACE), Indirect and Semi-Direct Aerosol Campaign (ISDAC), Ice Nucleating Particle Sources at Oliktok Point (INPOP), ARM West Antarctic Radiation Experiment (AWARE), Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS), and Macquarie Island Cloud and Radiation Experiment (MICRE); (2) evaluating the DOE Energy Exascale Earth System Model (E3SM) simulations based on observations, particularly for ice and mixed-phase cloud microphysical properties; (3) examining the impacts of INPs on ice and mixed-phase clouds. Specifically, a series of comparisons were conducted using observations over the Arctic, Southern Ocean, and Antarctica, including comparisons between the lower and higher southern latitudes as well as comparisons between the northern and southern hemispheres. In addition, aerosol indirect effects from distinct sources of dust particles were examined; and (4) investigating the impacts of SIP. Ultimately, these results helped to improve cloud microphysics and aerosol-cloud interaction parameterizations in the E3SM model. Overall, the project provided improved understanding regarding various factors, including thermodynamic, dynamic, and aerosol conditions, on the micro- and macrophysical properties of ice and mixed-phase clouds in the high latitudes. Resulting analysis helped to provide an improved physical basis for refining the current cloud microphysics parameterizations related to ice and mixed-phase clouds in E3SM.
The AWAKEN Dual-Doppler Lidar (ADDLidar) experiment was conducted as part of the larger AWAKEN field campaign (https://www.nrel.gov/wind/awaken.html). The American Wake Experiment (AWAKEN) is an international, multi-institutional wind energy field campaign that was conducted from May 2022 to 2024, in the vicinity of the King Plains wind farm in north central Oklahoma. The goal of AWAKEN was to provide observations to better understand interactions between wind turbines in a wind farm and the interactions between the wind farm as a whole and the atmosphere. The focus of the ADDLidar campaign was to provide height-resolved measurements of wind speed and direction at key locations upwind of the wind farm to characterize the inflow and possible blockage effects upwind of the farm. Specifically, dual-Doppler scanning methods were employed to create a number of so-called virtual towers (Calhoun et al 2006, Debnath et al. 2017, Fernando et al. 2019, Hill et al. 2010, Newman et al. 2016, Newsom et al. 2008, 2015) upwind of the farm. The ADDLidar campaign involved the deployment of two U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility scanning Doppler lidars (S/N 236 and 237) to AWAKEN sites A4 (36.361894°, -97.356352°) and A7 (36.347259°, -97.389968°). Both sites are located approximately 29 km south of the ARM Southern Great Plains (SGP) observatory C1 site, as shown in Figure 1. These sites were chosen for their close proximity to the most southerly row of turbines in the King Plains wind farm.