Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Resistivity and magnetoresistance properties of R 2 NiSi 3 (R = Gd, Dy, Ho, Er, Tm) compounds

The resistivity and magnetoresistance behaviour of the hexagonal intermetallic compounds R 2 NiSi 3 (R = Gd, Dy, Ho, Er, and Tm) are reported here. All the studied polycrystalline compounds exhibit metallic behavior along with additional magnetic anomalies at low temperatures. A well-defined resistivity minima is observed in Gd 2 NiSi 3 and Dy 2 Ni 0.87 Si 2.95 at a temperature much higher than their respective magnetic transition temperatures. The anomaly has been ascribed to the charge carrier localization caused by magnetic precursor effect. Magnetic field induced crossover from positive to negative magnetoresistance (MR) behavior associated with antiferromagnetic ground state is evidenced for Gd 2 NiSi 3 and Er 2 NiSi 3 in the low temperature region. Although Tm 2 Ni 0.93 Si 2.93 does not exhibit any long range magnetic order down to 2 K, a sudden drop in resistivity behavior is observed below ~10 K. Furthermore, presence of short range magnetic correlation observed in a wide temperature range, much beyond their respective magnetic ordering temperatures, has been argued to be responsible for achieving finite negative MR for all the compounds. Additionally, a subtle resemblance between the observed transport anomalies and the magnetic properties of these systems has been discussed.

36 MATERIALS SCIENCE↗

Intrinsic and hard magnetic properties of (Sm 1-x R x )-Fe-Co-V alloys (R = Gd, Zr, and Y)

SmFe 12 -based compounds with the ThMn 12 -type structure have a great potential as future rare-earth-lean permanent magnets. However, their reliance on stabilizing non-magnetic elements has impeded practical applications. Therefore, elements such as Gd, Y, and Zr have gained popularity as candidates to minimize the need for stabilizing elements by reducing the formation energy of the ThMn 12 (1:12) phase. Here, this study examines the effect of Gd, Y, and Zr on the intrinsic and hard magnetic properties in (Sm 1-x R x ) 1.2 Fe 8.4 Co 2.1 V 1.5 (or with nominal composition of (Sm 1-x R x ) 9.1 Fe 63.6 Co 15.9 V 11.4 ) with a single 1:12 phase for 0 ≤ x ≤ 0.3. Notably, samples substituted with Gd exhibit an enhanced temperature dependence of the magnetic properties.

36 MATERIALS SCIENCE↗

Alternative Designs and Analyses for Destructive and Non-replicable Gauge R &R Studies

This article presents new designs and their analyses for destructive and non-replicable gauge R & R studies. Less restrictive assumptions about destructive measurements on “similar” parts and non-replicable measurements made over time or space than have been made previously in the literature are proposed; only couples of “nearly identical” parts are proposed for destructive measurements and quadruples involving two operators are proposed for non-replicable measurements that avoid having to estimate a common trend and removing it. In this work, these new designs based on balanced incomplete block designs and their analyses are illustrated with simulated examples that confirm that with them such measurements systems can be assessed.

42 ENGINEERING↗

Ultrawide Temperature Range Super-Invar Behavior of R 2 (Fe,Co) 17 Materials ( R = Rare Earth)

Super Invar (SIV), i.e., zero thermal expansion of metallic materials underpinned by magnetic ordering, is of great practical merit for a wide range of high precision engineering. However, the relatively narrow temperature window of SIV in most materials restricts its potential applications in many critical fields. Here, we demonstrate the controlled design of thermal expansion in a family of R 2 (Fe,Co) 17 materials (R=rare Earth). We find that adjusting the Fe-Co content tunes the thermal expansion behavior and its optimization leads to a record-wide SIV with good cyclic stability from 3–461 K, almost twice the range of currently known SIV. In situ neutron diffraction, Mössbauer spectra and first-principles calculations reveal the 3d bonding state transition of the Fe-sublattice favors extra lattice stress upon magnetic ordering. On the other hand, Co content induces a dramatic enhancement of the internal molecular field, which can be manipulated to achieve “ultrawide” SIV over broad temperature, composition and magnetic field windows. Furthermore, these findings pave the way for exploiting thermal-expansion-control engineering and related functional materials.

36 MATERIALS SCIENCE↗

Reliability of Copper Inverse Opal Surfaces for Extreme-Heat-Flux Micro-Coolers in Low-Global-Warming-Potential Refrigerant R-1233zd Pool Boiling Experiments

This presentation provides a brief snapshot of the InterPACK paper InterPACK2023-113781. The paper explores copper inverse opal (CIO) surface reliability in pool boiling experiments in water and a new, low-global-warming-potential (GWP = 1) hydrofluoroolefin (HFO) refrigerant R-1233zd. The CIO-based structure is intended to develop enhanced two-phase heat transfer surfaces for extreme-heat-flux (approximately 1 kW/cm2) micro-coolers. In this study, a limited number of pool boiling experiments were performed using water and HFO-1233zd fluid, and the reliability of the CIO-based surfaces was evaluated. Critical heat flux (CHF) values in HFO-1233zd at 40 Degrees Celsius to 45 Degrees Celsius saturation temperatures and the corresponding saturation pressures were also measured. The CHF values with the refrigerant are significantly lower compared to those with water, but the refrigerant allows for a wider usable temperature range in the end application of the micro-coolers and is not limited to data centers with controlled ambient conditions. Reliability experiments with CIO surface samples - involving pool boiling with water on the CIO surfaces for approximately 48 hours and with HFO-1233zd for 144 hours - showed no structural degradation of the enhanced surface or any significant performance drop in heat transfer coefficients. The CIO surface samples in water were oxidized, most likely due to the presence of air in water and in the experimental vessel.

critical heat flux↗

Next-Generation Sequencing Data from a CUT&RUN Study of R. toruloides IFO0880 Cse4 and Orc1 Binding Sites

Rhodotorula toruloides has been increasingly explored as a host for bioproduction of lipids, fatty acid derivatives and terpenoids. Various genetic tools have been developed, but neither a centromere nor an autonomously replicating sequence (ARS), both necessary elements for stable episomal plasmid maintenance, has yet been reported. In this study, cleavage under targets and release using nuclease (CUT&RUN), a method used for genome-wide mapping of DNA–protein interactions, was used to identify R. toruloides IFO0880 genomic regions associated with the centromeric histone H3 protein Cse4, a marker of centromeric DNA. Fifteen putative centromeres ranging from 8 to 19 kb in length were identified and analyzed, and four were tested for, but did not show, ARS activity. These centromeric sequences contained below average GC content, corresponded to transcriptional cold spots, were primarily nonrepetitive and shared some vestigial transposon-related sequences but otherwise did not show significant sequence conservation. Future efforts to identify an ARS in this yeast can utilize these centromeric DNA sequences to improve the stability of episomal plasmids derived from putative ARS elements.

Genome Engineering↗

R-matrix School 2025: Introduction to R-matrix Theory

This technical memo serves as a lecture material for the R-matrix school 2025 and distributed among the participants. The manuscript discusses in details the introduction to the R-matrix theory including its algorithm to calculate reaction cross sections and derivation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Synthesis, structure, and electrochemical properties of [LNi(R f )(C 4 F 8 )] - and [LNi(R f ) 3 ] - complexes

The new anionic nickelate complexes [(MeCN)Ni(C 4 F 8 )(CF 3 )] -, [(MeCN)Ni(C 4 F 8 )(C 2 F 5 )] - , [(IMes)Ni(C 4 F 8 )(CF 3 )] - , [(IMes)Ni(CF 3 ) 3 ] - (IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), and [(F-NHC)Ni(Rf) 3 ] - (F-NHC = 1,3-bis(2,4-F2Ph), 2,4,6-F 3 Ph- or 3,4,5-F 3 Ph)imidazol-2-ylidene; (R f = CF 3 or C 2 F 5 ) were synthesized and structurally characterized. The electrochemical properties of all new compounds were revealed by cyclic voltammetry studies and compared to the known CF 3 analogue [(MeCN)Ni(CF 3 ) 3 ] -. The IMes-coordinated complexes exhibited initial oxidation events that were well-separated from a second oxidation process in the cyclic voltammograms. The complexes containing F-substituted NHC ligands [(F-NHC)Ni(CF 3 ) 3 ] - are structurally quite similar to the IMes derivative and reveal also two separated oxidation waves in their cyclic voltammograms. The absolute potentials as well as the separation between the two waves vary with the substitution pattern, suggesting that the NHC ligand environment (NHC = N-heterocyclic carbene) is an interesting platform for the development of new redox-triggered reactions that release trifluoromethyl and perfluoroalkyl radicals upon oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PERCEPTIVE: an R shiny $\underline{p}$ipelin$\underline{e}$ for the p$\underline{r}$edi$\underline{c}$tion of $\underline{ep}$igenetic modula$\underline{t}$ors $\underline{i}$n no$\underline{v}$el sp$\underline{e}$cies

Epigenetic processes are central to regulating gene expression, genome stability, and metabolic function across the tree of life; yet, their roles remain underexplored in microalgae, especially as new species continue to be identified and characterized. This is likely due to the cumbersome nature and species-dependent attributes of epigenetic wet-lab methodologies, which preclude the rapid identification of epigenetic modifications and modulators. However, there is high conservation of epigenetic processes from budding yeast to humans; in many cases, one may infer how behavior and function are epigenetically regulated in novel species by identifying epigenetic modulators, or the proteins responsible for conferring epigenetic modifications. Here, to this end, we have developed a graphical software package, titled PERCEPTIVE (pipeline for the prediction of epigenetic modulators in novel species). This platform solely uses the genomic sequence of an algal species, and preexisting information from other model organisms, to predict the epigenetic modulators and associated modifications in algae. Predictions are presented to the user in a graphical interface, which provides literature-based interpretation of results, enabling users to quickly understand potential epigenetic processes in their algal species of interest and plan follow-up experiments. To test PERCEPTIVE, we predicted epigenetic modulators in several feedstock candidate algae species. To validate these predictions, wet-lab studies were performed, including mass spectrometry; these results underscore the high accuracy of PERCEPTIVE predictions. Overall, PERCEPTIVE represents a powerful in silico tool for the research and manipulation of algal species, which does not require a priori knowledge of epigenetics and is accessible to a broad set of investigators.

59 BASIC BIOLOGICAL SCIENCES↗

Rare Earth Engineering in R Mn 6 Sn 6 ( R = Gd–Tm, Lu) Topological Kagome Magnets

Exploration of the topological quantum materials with electron correlation is at the frontier of physics, as the strong interaction may give rise to new topological phases and transitions. Here we report that a family of kagome magnets RMn 6 Sn 6 manifest the quantum transport properties analogical to those in the quantum-limit Chern magnet TbMn 6 Sn 6 . The topological transport in the family, including quantum oscillations with nontrivial Berry phase and large anomalous Hall effect arising from Berry curvature field, points to the existence of Chern gapped Dirac fermions. Furthermore, our observation demonstrates a close relationship between rare-earth magnetism and topological electron structure, indicating the rare-earth elements can effectively engineer the Chern quantum phase in kagome magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synergetic Use of the WSR-88D Radars, GOES-R Satellites, and Lightning Networks to Study Microphysical Characteristics of Hurricanes

Abstract This study analyzes the microphysics and precipitation pattern of Hurricanes Harvey (2017) and Florence (2018) in both the eyewall and outer rainband regions. From the retrievals by a satellite red–green–blue scheme, the outer rainbands show a strong convective structure while the inner eyewall has less convective vigor (i.e., weaker upper-level reflectivities and electrification), which may be related to stronger vertical wind shear that hinders fast vertical motions. The WSR-88D column-vertical profiles further confirm that the outer rainband clouds have strong vertical motion and large ice-phase hydrometeor formation aloft, which correlates well with 3D Lightning Mapping Array source counts in height and time. From the results from this study, it is determined that the inner eyewall region is dominated by warm rain, whereas the external rainband region contains intense mixed-phase precipitation. External rainbands are defined here as those that reside outside of the main hurricane circulation, associated with surface tropical storm wind speeds. The synergy of satellite and radar dual-polarization parameters is instrumental in distinguishing between the key microphysical features of intense convective rainbands and the warm-rain-dominated eyewall regions within the hurricanes. Substantial amounts of ice aloft and intense updrafts in the external rainbands are indicative of heavy surface precipitation, which can have important implications for severe weather warnings and quantitative precipitation forecasts. The novel part of this study is to combine ground-based radar measurement with satellite observations to study hurricane microphysical structure from surface to cloud top so as to fill in the gaps between the two observational techniques.

Meteorology & Atmospheric Sciences↗