Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process settings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Tutorial for Non-Orthogonal Configuration Interaction Fragment Studies Using GronOR

A brief tutorial is presented for the GronOR non-orthogonal configuration interaction application illustrating the download and build process, setting up calculations with OpenMolcas and GronOR, and a description of the file structure and input options. An overview of the computational workflow includes the generation of fragment wave functions and integrals with an adapted version of OpenMolcas, running GronOR calculations, and accounting for dynamic correlation corrections. Three end-to-end use cases are provided, representing a molecular dimer, an ion pair, and overlapping molecular fragments.

Straatsma, T.P.↗
DOE OSTI2021

Understanding the setting and hardening process of wollastonite-based brushite cement. Part 2: Influence of the boron and aluminum concentrations in the mixing solution

The mixing solution of wollastonite-based brushite cement is a phosphoric acid solution containing metallic cations and borax. This work complements a previous study devoted to the influence of the H{sub 3}PO{sub 4} concentration, Ca/P and liquid-to-solid (l/s) ratios on the setting and hardening process of the binder by providing new insight into the role of aluminum and boron. Boron retards the setting and decreases the heat released during the process. It also contributes to reduce the macroporosity of the hardened material but yields to poor compressive strength. With aluminum in the mixing solution, the mechanical properties are greatly improved thanks to the precipitation of an amorphous aluminophosphate which increases the density of the cement matrix. But aluminum alone leads to fast setting. A joint addition of boron and aluminum to the mixing solution makes it possible to get a material with optimized properties both in fresh and hardened states.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reconstructing the Universe: Testing the Mutual Consistency of the Pantheon and SDSS/eBOSS BAO Data Sets with Gaussian Processes

We test the mutual consistency between the baryon acoustic oscillation measurements from the eBOSS SDSS final release and the Pantheon supernova compilation in a model-independent fashion using Gaussian process regression. We also test their joint consistency with the ΛCDM model in a model-independent fashion. We also use Gaussian process regression to reconstruct the expansion history that is preferred by these two data sets. While this methodology finds no significant preference for model flexibility beyond ΛCDM, we are able to generate a number of reconstructed expansion histories that fit the data better than the best-fit ΛCDM model. These example expansion histories may point the way toward modifications to ΛCDM. We also constrain the parameters Ω{sub k} and H {sub 0} r {sub d} both with ΛCDM and with Gaussian process regression. We find that H {sub 0} r {sub d} = 10,030 ± 130 km s{sup −1} and Ω{sub k} = 0.05 ± 0.10 for ΛCDM and that H {sub 0} r {sub d} = 10,040 ± 140 km s{sup −1} and Ω{sub k} = 0.02 ± 0.20 for the Gaussian process case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Thermal Image Processing for Feature Extraction from Encapsulated Phase Change Materials

Encapsulated inorganic particles with high melting points (>300 °C) are desired as high-temperature Phase Change Materials (PCMs) for next-generation Latent Heat Thermal Energy Storage (LHTES) systems. One of the many challenges during the development of PCMs is to achieve a high throughput that in turn depends on accurately modeling the relation between process parameters and geometric & thermal properties of the PCMs particle. During the production of the PCMs, a high-speed infrared camera is used to acquire images of the encapsulated material under controlled illumination conditions. This research article focuses on the development of image processing techniques for both geometric and thermal feature extraction during the development of the PCMs. A user-friendly GUI has been designed in MATLAB and preliminary experimental results have demonstrated that the method is fast, accurate and reliable for a high throughput production. The extracted features will be used to develop Machine Learning (ML) models to predict the geometric and thermal properties of the PCM based on the process parameter settings. The ML model will accelerate the search for the optimized process settings to boost the throughput of the production.

25 ENERGY STORAGE↗
DOE OSTI2020

Guide to CFD-Chemical Model for Spent Fuel Storage

This outlines the steps that were used to create the CFD model in Star-CCM+ to simulate the 50 year thermal history of ATR fuel stored in DOE sealed canisters. Then this goes through the steps to set up the processing the model results for the one-way coupled Cantera chemical model. The next part describes the process for setting up the 50-year Cantera model in Python. The goal of this is to document the procedure for quality assurance, as well as in the event another person will need to run the process to generate additional results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Influence of Single-Point Incremental Force Process Parameters on Forming Characteristics and Microstructure Evolution of AA-6061 Alloy Sheet

Single-point incremental forming (SPIF) process comprises a set of process variables, such as forming tool diameter, vertical pitch, spindle rotation speed, and tool velocity, which may affect the forming behavior of the sheet to be deformed. The objective of this work is to study the effect of SPIF process parameters on forming characteristics and microstructure development for the AA-6061 (T6) aluminum alloy sheet. The SPIF experiments and finite element (FE) simulations were performed at different process parameters to achieve conical shapes from the AA-6061 blanks. The effect of process parameters on forming forces, thickness uniformity in wall region of the cone and surface roughness of the blank was analyzed. A detailed microstructure study was performed to analyze the effect of process variables on microstructure and texture evolution during the SPIF process. This study reveals that the process parameters are likely to influence the texture development especially at high tool diameter and vertical pitch values. Therefore, suitability and consequences of using different combinations of tool diameter and vertical pitch values are discussed for AA-6061 alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Setting Priorities: A Process Improvement Study to Achieve Greater Team Efficiency.

This report details a comprehensive process improvement study designed to optimize team efficiency and strategic focus within an Identity and Access Management (IAM) technical unit at Los Alamos National Laboratory (LANL). Faced with a high volume of operational support and a fragmented project landscape, the team experienced "capacity fatigue" and delivery times extending into years.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRSDate not supplied

Evaluation of the Accuracy of the Load Prediction Equations of Low-Load Balance Calibration Data

Accuracy and reliability of the load prediction equations of a low-load calibration data set of a force balance were investigated. First, independent load prediction equations were generated from the data of a full-load and low-load machine calibration. Then, the low- load data set was processed as a set of precision check loads for the load prediction equations that were obtained from the full-load and low-load calibrations. Finally, the load prediction equations of the two calibrations were applied to four manual check load data sets that were recorded between 2009 and 2022. The residuals of the predicted calibration and check loads were compared in all cases. No systematic improvement of the load prediction accuracy was observed when the load prediction equations of the low-load calibration were applied to the check load data sets. Therefore, it is recommended to apply a full-load calibration to a six-component balance even if the balance is not used across its entire design envelope. This approach has the advantage that the resulting load prediction equations are less likely to be applied outside of the calibration load ranges. In addition, it is expected that the numerical estimates of the gage sensitivities are more reliable assuming that the uncertainties of the applied loads and measured outputs of the calibration data are more or less constant across the load range of the balance.

strain-gage balance↗
NASA NTRSDate not supplied

Evaluation of the Accuracy of the Load Prediction Equations of Low-Load Balance Calibration Data

Accuracy and reliability of the load prediction equations of a low-load calibration data set of a force balance were investigated. First, independent load prediction equations were generated from the data of a full-load and low-load machine calibration. Then, the low-load data set was processed as a set of precision check loads for the load prediction equations that were obtained from the full-load and low-load calibrations. Finally, the load prediction equations of the two calibrations were applied to four manual check load data sets that were recorded between 2009 and 2022. The residuals of the predicted calibration and check loads were compared in all cases. No systematic improvement of the load prediction accuracy was observed when the load prediction equations of the low-load calibration were applied to the check load data sets. Therefore, it is recommended to apply a full-load calibration to a six-component balance even if the balance is not used across its entire design envelope. This approach has the advantage that the resulting load prediction equations are less likely to be applied outside of the calibration load ranges. In addition, it is expected that the numerical estimates of the bridge sensitivities are more reliable assuming that the uncertainties of the applied loads and measured outputs of the calibration data are more or less constant across the load range of the balance.

strain-gage balance↗
DOE OSTI2019

DE-FE0026098 Final Report - Advanced Materials and Manufacturing Processes for SOFC Power Systems Revision 1

The aim of the project is to qualify an integrated material set and processing solution for selected metallic components of an advanced integrated stack block. As the integrated stack block is the “engine” of the solid oxide fuel cell power system, the project will also support significant cost reductions, increased reliability, and improved performance of the LG Fuel Cell Systems Inc. (“LGFCS”) cell and stack technology to be included in the initial commercial product offering. In the proposed work an integrated material set, and processing solution will be developed using powder metals processing which has been proven to be an enabling technology capable of delivering net or near net shape components, as well as for creating compositions, microstructures, and properties that are otherwise unattainable. Several advanced manufacturing processes will be screened to select one or more that are most advantageous for the selected metallic components when produced at commercial volumes. This work will be accomplished through the integration of metallurgists and processing engineers from Carpenter Technology, with the product design and cost engineers from LGFCS. The expected outcome of the proposed work is an optimized material set and processing solution that will reduce the current cost.

03 NATURAL GAS↗
NASA NTRS1977

Effect of processing parameters on autoclaved PMR polyimide composites

A study was conducted to determine the effect of processing parameters on the processability and properties of autoclaved fiber reinforced PMR polyimide composites. Composites were fabricated from commercially available graphite fabric and glass fabric PMR polyimide prepreg materials. Process parameters investigated included degree of resin advancement, heating rate, and cure pressure. Composites were inspected for porosity by ultrasonic C scan and photomicrographic examination. Processing characteristics for each set of process parameters and the effect of process parameters on composite mechanical properties at room temperature and 600 F are described.

Vannucci, R. D.↗
NASA NTRS1977

Effect of processing parameters on autoclaved PMR polyimide composites

A study was conducted to determine the effect of processing parameters on the processability and properties of autoclaved fiber reinforced PMR polyimide composites. Composites were fabricated from commercially available graphite fabric and glass fabric PMR polyimide prepreg materials. Process parameters investigated included degree of resin advancement, heating rate, and cure pressure. Composites were inspected for porosity by ultrasonic 'C' scan and photomicrographic examination. Processing characteristics for each set of process parameters and the effect of process parameters on composite mechanical properties at room temperature and 600 F are described.

Vannucci, R. D.↗
DOE OSTI2021

Cumulative $\chi^2$ Metric for VALID for ENDF/B-VII.1 and ENDF/B-VIII.0 in SCALE 6.3b9

Nuclear data testing is generally performed in a manner similar to validation: a series of critical benchmark experiments is modeled, and the differences between calculated and expected results are examined to understand the performance of a code and cross section set. This process is repeated for multiple sets of experiments with different transport codes and sometimes with different datasets. Occasionally, data processing differences are also important in understanding the differences in calculated results. Relevant experts then meet periodically to compare results and set priorities for improvement in the next round of data updates. This process has been largely effective, despite the confounding factors of different benchmark sets, application areas, sponsors, nationalities, and the resulting different priorities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1980

Differential Very Long Baseline Interferometry (delta VLBI) spacecraft tracking system demonstration. Part 2: Data acquisition and processing

A set of experiments in the use of Differential Very Long Baseline Interferometry (delta VLBI) for spacecraft navigation were completed. Data using both Voyager spacecraft and a single quasar were acquired during the Jupiter encounter time period. The data were processed and analyzed to assess the navigation accuracy of delta VLBI. The data reduction and techniques for assessing data quality and consistency are discussed.

Christensen, C. S.↗
NASA NTRS2013

Automated Planning of Science Products Based on Nadir Overflights and Alerts for Onboard and Ground Processing

A set of automated planning algorithms is the current operations baseline approach for the Intelligent Payload Module (IPM) of the proposed Hyper spectral Infrared Imager (HyspIRI) mission. For this operations concept, there are only local (e.g. non-depletable) operations constraints, such as real-time downlink and onboard memory, and the forward sweeping algorithm is optimal for determining which science products should be generated onboard and on ground based on geographical overflights, science priorities, alerts, requests, and onboard and ground processing constraints. This automated planning approach was developed for the HyspIRI IPM concept. The HyspIRI IPM is proposed to use an X-band Direct Broadcast (DB) capability that would enable data to be delivered to ground stations virtually as it is acquired. However, the HyspIRI VSWIR and TIR instruments will produce approximately 1 Gbps data, while the DB capability is 15 Mbps for a approx. =60X oversubscription. In order to address this mismatch, this innovation determines which data to downlink based on both the type of surface the spacecraft is overflying, and the onboard processing of data to detect events. For example, when the spacecraft is overflying Polar Regions, it might downlink a snow/ice product. Additionally, the onboard software will search for thermal signatures indicative of a volcanic event or wild fire and downlink summary information (extent, spectra) when detected, thereby reducing data volume. The planning system described above automatically generated the IPM mission plan based on requested products, the overflight regions, and available resources.

Chien, Steve A.↗
NASA NTRS2010

The ICARE Method

The ICARE method is a flexible, widely applicable method for systems engineers to solve problems and resolve issues in a complete and comprehensive manner. The method can be tailored by diverse users for direct application to their function (e.g. system integrators, design engineers, technical discipline leads, analysts, etc.). The clever acronym, ICARE, instills the attitude of accountability, safety, technical rigor and engagement in the problem resolution: Identify, Communicate, Assess, Report, Execute (ICARE). This method was developed through observation of Space Shuttle Propulsion Systems Engineering and Integration (PSE&I) office personnel approach in an attempt to succinctly describe the actions of an effective systems engineer. Additionally it evolved from an effort to make a broadly-defined checklist for a PSE&I worker to perform their responsibilities in an iterative and recursive manner. The National Aeronautics and Space Administration (NASA) Systems Engineering Handbook states, engineering of NASA systems requires a systematic and disciplined set of processes that are applied recursively and iteratively for the design, development, operation, maintenance, and closeout of systems throughout the life cycle of the programs and projects. ICARE is a method that can be applied within the boundaries and requirements of NASA s systems engineering set of processes to provide an elevated sense of duty and responsibility to crew and vehicle safety. The importance of a disciplined set of processes and a safety-conscious mindset increases with the complexity of the system. Moreover, the larger the system and the larger the workforce, the more important it is to encourage the usage of the ICARE method as widely as possible. According to the NASA Systems Engineering Handbook, elements of a system can include people, hardware, software, facilities, policies and documents; all things required to produce system-level results, qualities, properties, characteristics, functions, behavior and performance. The ICARE method can be used to improve all elements of a system and, consequently, the system-level functional, physical and operational performance. Even though ICARE was specifically designed for a systems engineer, any person whose job is to examine another person, product, or process can use the ICARE method to improve effectiveness, implementation, usefulness, value, capability, efficiency, integration, design, and/or marketability. This paper provides the details of the ICARE method, emphasizing the method s application to systems engineering. In addition, a sample of other, non-systems engineering applications are briefly discussed to demonstrate how ICARE can be tailored to a variety of diverse jobs (from project management to parenting).

Henke, Luke↗