Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precursors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Crystallization of TiO 2 polymorphs from RF-sputtered, amorphous thin-film precursors

Crystalline TiO 2 films of anatase, brookite, and rutile are reproducibly made from amorphous precursors deposited by RF magnetron sputtering, producing large-area, single phase films of uniform thickness. Sputtered amorphous TiO 2 precursor thin films follow the general behavior observed for amorphous precursor thin films generated by pulsed laser deposition, namely, that oxygen deficiency is necessary for the formation of brookite and rutile. We quantify the oxygen deficiency and correlate it with the long wavelength optical absorption. We find that the precursor deposition rate is also a contributing factor to phase selection and that brookite and rutile form from films deposited more rapidly and anatase from films deposited more slowly. Sputtered and pulsed laser deposited amorphous precursor films prepared with similar oxygen deficiency and similar thickness result in the same final state after annealing, but the rate for sputtered precursors is slower.

14 SOLAR ENERGY↗
DOE OSTI2022

Phase evolution and morphology in Cu-In-Ga sputtered precursors

The reaction of metallic precursors has become the primary method of industrial manufacturing for Cu(In,Ga)Se2. Commonly used Cu3Ga sputter targets have thus far dictated that the relative Ga composition of these precursors is Ga/(In+Ga) ≈ 0.25. Cu-In-Ga precursors are prepared with varying DC sputtering conditions and Ga compositions ranging from 0 ≤ Ga/(In+Ga) ≤ 0.75. The phase evolution and morphology of these precursors is characterized using x-ray diffraction (XRD) and scanning electron microscopy, including in situ annealing of precursors during XRD measurements. It is observed that the Ga composition of as-deposited precursors affects phase evolution with annealing. Consistent morphology changes were not observed with changing Ga, however, film morphology was controlled by adjusting In sputter conditions.

Lam, Isaac K. (ORCID:0000000198002765)↗
NASA NTRS1994

Results of partial melting experiments on chondritic precursors of basaltic achondrites

Recent partial melting experiments on Murchison produced eucrite like glasses at reducing conditions. Although the glasses were remarkably similar to eucrites, the Fe/Mn ratio of the glasses was too high and the O isotopes cannot match eucrites. Mixing 70% H chondrite with 30% CM chondrite makes a potential precursor that satisfies the O isotope constraint on the eucrites. From experiments on both synthetic Murchison and a simplified version of the H70-CM30 mixture, simple partial melting of any individual or combination of known chondritic meteorites is incapable of producing eucritic glasses that have the appropriate Fe/Mn, Fe/(Fe + Mg), and O isotope ratios. In order to satisfy the Fe-Mn-Mg constraints imposed by the eucrites, both reduction of FeO to Fe-metal and olivine fractionation must occur in the precursor before partial melting is allowed to occur and produce the eucritic glass. To test this hypothesis, partial melting experiments on both Murchison and a mixture of 70% Allegan (H6)-30% Murchison (CM2) were conducted. The results of these new experiments show that to satisfy the O isotopes, Fe/Mn ratio, and Fe/(Fe + Mg) ratio, approximately 12% reduction of FeO to Fe-metal (in the silicate portion) and 20% olivine fractionation is required within the H-CM precursor to permit the formation of eucrites by partial melting. The sequence of FeO reduction and mantle fractionation permits very eucritic glasses to be produced. The problem that many remain with the H-CM precursor, however, is an overabundance of alkali elements. Correlations between temperature, O fugacity, and composition have also been found within our experiments. A basaltic achondrite precursor formed by mixing H and CM chondrites and constrained by O isotopes and Fe-Mn-Mg is compatible with a model of natural eucrites having formed by partial melting after metal and olivine fractionation in that precursor.

Boesenberg, J. S.↗
NASA NTRS2006

Single-source precursors for ternary chalcopyrite materials, and methods of making and using the same

A single source precursor for depositing ternary I-III-VI.sub.2 chalcopyrite materials useful as semiconductors. The single source precursor has the I-III-VI.sub.2 stoichiometry built into a single precursor molecular structure which degrades on heating or pyrolysis to yield the desired I-III-VI.sub.2 ternary chalcopyrite. The single source precursors effectively degrade to yield the ternary chalcopyrite at low temperature, e.g. below 500.degree. C., and are useful to deposit thin film ternary chalcopyrite layers via a spray CVD technique. The ternary single source precursors according to the invention can be used to provide nanocrystallite structures useful as quantum dots. A method of making the ternary single source precursors is also provided.

Banger, Kulbinder K.↗
NASA NTRS2007

Making Single-Source Precursors of Ternary Semiconductors

A synthesis route has been developed for the commercial manufacture of single- source precursors of chalcopyrite semiconductor absorber layers of thin-film solar photovoltaic cells. A closely related class of single-source precursors of these semiconductors, and their synthesis routes, were reported in "Improved Single-Source Precursors for Solar-Cell Absorbers" (LEW-17445-1), NASA Tech Briefs, Vol. 31, No. 6 (June 2007), page 56. The present synthesis route is better suited to commercialization because it is simpler and involves the use of commercially available agents, yet offers the flexibility needed for synthesis of a variety of precursors. A single-source precursor of the type of interest here is denoted by the general formula L2M'(mu-ER)2M(ER)2, where L signifies a Lewis base; M signifies Al, In, or Ga; M' signifies Ag or Cu; R signifies an alkyl, aryl, silyl, or perfluorocarbon group; E signifies O, S, Se, or Te; and mu signifies a bridging ligand. This compound can be synthesized in a "one-pot" procedure from ingredients that are readily available from almost any chemical supplier. In a demonstration, the following synthesis was performed: Under anaerobic conditions, InCl3 was reacted with sodium ethanethiolate in methanol in a 1:4 molar ratio to afford the ionic stable intermediate compound Na+[In(SEt)4]- (where Et signifies ethyl group). After approximately 15 minutes, a heterogeneous solution of CuCl and the Lewis base PPh3 (where Ph signifies phenyl) in a 1:2 ratio in a mixture of CH3CN and CH2Cl2 was added directly to the freshly prepared Na+[In(SEt)4]-. After 24 hours, the reaction was essentially complete. The methanolic solution was concentrated, then the product was extracted with CH2Cl2, then the product was washed with dry ether and pentane. The product in its final form was a creamy white solid. Spectroscopic and elemental analysis confirmed that the product was (PPh3)2Cu(mu-SEt)2In(mu-SEt)2, which is known to be a precursor of the ternary semiconductor CuInS2.

Hepp, Aloysius↗
NASA NTRS2019

Deep Learning Method for Detecting Precursors to Adverse Events

With the recent advancements in Deep Learning methods, the ability to model large complex heterogeneous data sets are fundamentally changing industry and research. Coupled with hardware improvements, and ease of implementation, a wide variety of deep neural network architectures can quickly be developed to solve a sweeping range of problems such as: object detection in images, automatic healthcare diagnosis using heterogenous data sources, real time language translating and sentence prediction, upscaling low resolution images, and forecasting of multivariate timeseries. Generally, many of these architectures outperform classical machine learning approaches in their respective tasks, however, this typically comes at a cost of interpretability. These black box algorithms generally suffer from lack of transparency in both model complexity as well as the rationale behind the prediction. This lack of comprehension, is driving an emerging area of interest in “Explainable AI”. An algorithm called: “Deep Temporal Multiple Instance Learning”1 was a recently developed to identify precursors to adverse events and has been applied in the aviation domain. The deep learning architecture is designed to capture the evolution of the probability of the outcome over the time preceding the adverse event using a multiple instance learning approach as illustrated in Figure 1. Precursors are defined when the probability of the event has exceeded a threshold at some point in the timeseries, at which point, a sensitivity analysis is performed to determine contributing factors. The contributing factors are used to explain and define the precursor during the periods where the probability score is high. The identified contributing factors are then presented to subject matter experts to provide objective insights into the leading factors associated with the particular adverse event. The algorithm has been tested on flight data from a commercial airline and has the ability to discover precursors to known adverse events that take the form of safety critical operations, such as unstable approach events on final approach. Apart from detecting precursors to adverse events, the converse can also be leveraged to discover corrective actions. These positive actions manifest themselves as periods in the timeseries when the precursor score has been lowered from an elevated state; meaning that if the system had been left uncorrected, it would have eventually reached the adverse event state. Characterizing these state changes can help identify successful interventions that may not have been known before. Policy makers and procedure designers can use this additional knowledge to craft more safety and efficient resilient procedures for future operations and therefore improve the overall performance of the National Airspace.

Matthews, Bryan L.↗
DOE OSTI2021

System and method for rapid, high throughput, high pressure synthesis of materials from a liquid precursor

The present disclosure relates to a system and method for synthesis of condensed, nano-carbon materials to create nanoparticles. In one embodiment the system may have a source of liquid precursor, a flow control element and a shock wave generating subsystem. The flow control element is in communication with the source of the liquid precursor and creates a jet of liquid precursor. The shock wave generating subsystem drives a shock wave through at least a substantial portion of a thickness of the jet of liquid precursor to sufficiently compress the jet of liquid precursor, and to increase a pressure and a temperature of the jet of liquid precursor, to create solid state nanoparticles.

Armstrong, Mike↗
DOE OSTI2025

Influence of Alkyne Precursor Structure on Carbon Nanotube Chiral Distribution: Data-Dense Analysis Across Multiple Catalyst Types

Carbon nanotubes (CNTs) are a desirable material in the field of optoelectronics and semiconductors due to electronic properties (e.g., bandgap) that are dependent upon their chirality, defined by their diameter and lattice angle. Unfortunately, industrial-scale syntheses have yet to realize growth of a single desired chirality and instead rely on postsynthetic separation techniques to refine a chiral mixture, which increases process complexity and cost. Here, we studied the influence of precursor structure on chiral distribution, using a series of terminal alkyne precursors (acetylene, methylacetylene, vinylacetylene, 1-butyne, two enantiomers of 3-butyn-2-ol and a racemic mixture thereof) to grow CNTs across five transition-metal catalysts (Fe, FeMo, and three proportions of CoMo). Multiwavelength Raman spectroscopy on 5,145 spots (5 catalysts, 7 precursors, 3 lasers, and 49 distinct substrate locations on each) determined that acetylene grew the smallest diameter CNTs, while vinylacetylene produced fewer subnanometer CNTs. Though precursor structure did not dictate a uniform chiral shift, it was shown to broaden or narrow chiral distribution, while catalyst structure played a dominant role. In conclusion, this is consistent with metal-precursor binding occurring through unsaturated bonds in the hydrocarbons via the alkyne polymerization mechanism.

Carbon nanotubes↗
DOE OSTI2025

Precursor Identity and Surfactant Concentration Influence Shape of UO 2 Nanoparticles

A fundamental step toward studying the unique properties of actinide nanomaterials is control over the shape of actinide nanoparticles. Toward this goal, this work demonstrates the effects of precursor identity and surfactant concentration on the shape of uranium dioxide (UO 2 ) nanoparticles. UO 2 nanoparticles were synthesized by thermal decomposition of different precursors in the presence of oleylamine and oleic acid as surfactants. The size, shape, phase, and chemical composition of the nanoparticles was evaluated using transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), electron diffraction (ED), and U L 3 -edge X-ray absorption fine-structure (XAFS) spectroscopy. Anisotropic UO 2 nanocubes of ∼ 4 nm were obtained only with low surfactant concentrations, while increasing the surfactant concentration resulted in formation of nanoparticles with an isotropic, sphere morphology. The importance of precursor identity was also investigated by employing U(hfa) 4 , U(acac) 4 , UO 2 (acac) 2 , and UO 2 (hfa) 2 ·H 2 O (where hfa = hexafluoracetylacetone and acac = acetylacetone) as precursors. The nanocube morphology was only observed when U(hfa) 4 was used as a precursor. XAS allowed for comparison of the disorder in anisotropic vs isotropic UO 2 nanoparticles.

Nanocubes↗
NASA NTRSDate not supplied

Predicting Adverse Events and their Precursors in Aviation Using Multi-Class Multiple-Instance Learning

In recent years, there has been a rapid growth in the application of machine learning techniques that leverage aviation data collected from commercial airline operations to improve safety. Anomaly detection and predictive maintenance have been the main targets for machine learning applications. However, this paper focuses on the identification of precursors, which is a relatively newer application. Precursors are events correlated with adverse events that happen prior to the adverse event itself. Therefore, precursor mining provides many benefits including understanding the reasons behind a safety incident and the ability to identify signatures, which can be tracked throughout a flight to alert the operators of an potential upcoming adverse event. This work proposes using the multiple-instance learning (MIL) framework, a weakly supervised learning task, combined with a carefully designed Multi-Head Convolutional Neural Networks-Recurrent Neural Networks (MHCNN-RNN) architecture to predict different type of adverse events for any given flights and identify their precursors with little to no post-processing.Results obtained show that the MHCNN-RNN is able to accurately forecast high speed and high path angle events during the approach, and that it is also capable of determining the aircraft’s parameters that are correlated to these events. These parameters can be considered precursors to the events.

multiple instance learning↗
DOE OSTI2019

Predicting cost-effective carbon fiber precursors: Unraveling the functionalities of oxygen and nitrogen-containing groups during carbonization from ReaxFF simulations

Blends of polyacrylonitrile (PAN) and poly(p-phenylene-2,6-benzobisoxazole) (PBO) as precursors may offer an opportunity to reduce the cost of carbon fiber (CF) production. The all-carbon ring formations and volatile gas production during the heating and carbonization for 9 PAN/PBO blend precursors with varying mixing ratios are studied via the ReaxFF reactive molecular dynamics simulations. Evolutions of oxygen-containing (O-containing) and nitrogen-containing (N-containing) groups are detailed, in order to reveal the reaction mechanisms of the O and N-based CF precursors. Particularly, the O-containing groups are identified to be more efficient for initiating the carbonization, whereas N-containing groups are far longer retained in the graphitic materials and play a key role in capturing and converting carbon radical species into the graphitic networks. Additionally, the PAN/PBO blend precursor with a mole ratio of 1:1 is compared with the pre-oxidized PAN, PAN, and PBO. As a result, it is found that the PAN/PBO blends could be a promising alternative for the cost-effective PAN-based CF precursors, since they can decrease the cost of the CF production by means of: (a) eliminating the pre-oxidation process, (b) having considerable all-carbon ring formations within a short period, and (c) having a relatively fast conversion rate, reaching 95% 6-membered carbon ring formation.

42 ENGINEERING↗
DOE OSTI2026

Sintering effects on NpO 2 grain size and morphology: The role of precursor Np phase

Neptunium dioxide (NpO 2 ) is a key phase in nuclear material processing as a target material for the production of plutonium-238 ( 238 Pu) and has been historically synthesized via the calcination of a Np oxalate precursor. Alternative synthesis methods for NpO 2 are now more prevalent, necessitating their study and comparison with the more common oxalate route. The purpose of this work was to investigate the microstructural properties of NpO 2 synthesized from a nitrate-based Np precursor phase via the assessment of NpO 2 particle size and morphology as a function of calcination temperature and time. Scanning electron microscopy (SEM) was used to probe the primary grain size and morphology of NpO 2 after calcination at temperatures ranging from 700 to 1100 °C and hold times ranging from 1 to 10 h. Post-image analysis using ImageJ software enabled the quantification of mean particle diameter. This analysis indicated that particle diameter increases with both increasing calcination temperature and hold time. Primary particles were shown to be clumped in irregular patterns into the overall rough, blocky aggregates, but this macroscopic morphology was not affected by calcination time or temperature. Although trends in primary grain size of NpO 2 were consistent with available literature from other Np precursor phases, the macroscopic morphology of the NpO 2 aggregates was quite different than reported for other precursors. Through comparison with historical literature on Np oxalate, this work emphasizes the importance of Np precursor on the physical properties of NpO 2 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Autonomous and dynamic precursor selection for solid-state materials synthesis

Abstract Solid-state synthesis plays an important role in the development of new materials and technologies. While in situ characterization and ab-initio computations have advanced our understanding of materials synthesis, experiments targeting new compounds often still require many different precursors and conditions to be tested. Here we introduce an algorithm (ARROWS 3 ) designed to automate the selection of optimal precursors for solid-state materials synthesis. This algorithm actively learns from experimental outcomes to determine which precursors lead to unfavorable reactions that form highly stable intermediates, preventing the target material’s formation. Based on this information, ARROWS 3 proposes new experiments using precursors it predicts to avoid such intermediates, thereby retaining a larger thermodynamic driving force to form the target. We validate this approach on three experimental datasets, containing results from over 200 synthesis procedures. In comparison to black-box optimization, ARROWS 3 identifies effective precursor sets for each target while requiring substantially fewer experimental iterations. These findings highlight the importance of domain knowledge in optimization algorithms for materials synthesis, which are critical for the development of fully autonomous research platforms.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Vaccination induces broadly neutralizing antibody precursors to HIV gp41

A key barrier to the development of vaccines that induce broadly neutralizing antibodies (bnAbs) against human immunodeficiency virus (HIV) and other viruses of high antigenic diversity is the design of priming immunogens that induce rare bnAb-precursor B cells. The high neutralization breadth of the HIV bnAb 10E8 makes elicitation of 10E8-class bnAbs desirable; however, the recessed epitope within gp41 makes envelope trimers poor priming immunogens and requires that 10E8-class bnAbs possess a long heavy chain complementarity determining region 3 (HCDR3) with a specific binding motif. We developed germline-targeting epitope scaffolds with affinity for 10E8-class precursors and engineered nanoparticles for multivalent display. Scaffolds exhibited epitope structural mimicry and bound bnAb-precursor human naive B cells in ex vivo screens, protein nanoparticles induced bnAb-precursor responses in stringent mouse models and rhesus macaques, and mRNA-encoded nanoparticles triggered similar responses in mice. Thus, germline-targeting epitope scaffold nanoparticles can elicit rare bnAb-precursor B cells with predefined binding specificities and HCDR3 features.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Insights into the mechanism of SARS-CoV-2 main protease autocatalytic maturation from model precursors

A critical step for SARS-CoV-2 assembly and maturation involves the autoactivation of the main protease (MPro WT ) from precursor polyproteins. Upon expression, a model precursor of MPro WT mediates its own release at its termini rapidly to yield a mature dimer. A construct with an E290A mutation within MPro exhibits time dependent autoprocessing of the accumulated precursor at the N-terminal nsp4/nsp5 site followed by the C-terminal nsp5/nsp6 cleavage. In contrast, a precursor containing E290A and R298A mutations (MPro M ) displays cleavage only at the nsp4/nsp5 site to yield an intermediate monomeric product, which is cleaved at the nsp5/nsp6 site only by MPro WT . MPro M and the catalytic domain (MPro 1-199 ) fused to the truncated nsp4 region also show time-dependent conversion in vitro to produce MPro M and MPro 1-199 , respectively. The reactions follow first-order kinetics indicating that the nsp4/nsp5 cleavage occurs via an intramolecular mechanism. These results support a mechanism involving an N-terminal intramolecular cleavage leading to an increase in the dimer population and followed by an intermolecular cleavage at the C-terminus. Thus, targeting the predominantly monomeric MPro precursor for inhibition may lead to the identification of potent drugs for treatment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Time-resolved observation of transient precursor state of CO on Ru(0001) using carbon K-edge spectroscopy

The transient dynamics of carbon monoxide (CO) molecules on a Ru(0001) surface following femtosecond optical laser pump excitation has been studied by monitoring changes in the unoccupied electronic structure using an ultrafast X-ray free-electron laser (FEL) probe. The particular symmetry of perpendicularly chemisorbed CO on the surface is exploited to investigate how the molecular orientation changes with time by varying the polarization of the FEL pulses. The time evolution of spectral features corresponding to the desorption precursor state was well distinguished due to the narrow line-width of the C K-edge in the X-ray absorption (XA) spectrum, illustrating that CO molecules in the precursor state rotated freely and resided on the surface for several picoseconds. Most of the CO molecules trapped in the precursor state ultimately cooled back down to the chemisorbed state, while we estimate that ~14.5 ± 4.9% of the molecules in the precursor state desorbed into the gas phase. Finally, it was also observed that chemisorbed CO molecules diffused over the metal surface from on-top sites toward highly coordinated sites. In addition, a new “vibrationally hot precursor” state was identified in the polarization-dependent XA spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Single crystal purification reduces trace impurities in halide perovskite precursors, alters perovskite thin film performance, and improves phase stability

Impurities present in commercially available halide perovskite precursors are known to affect photovoltaic performance. Here, we employ bulk single crystal growth of FAPbI 3 using solvent orthogonality induced crystallization (SONIC) to remove a broad set of extrinsic impurities from commercially available halide perovskite precursors, as verified by detailed chemical analysis. Following SONIC purification, FAPbI 3 films made from PbI 2 of originally low purity (99%) and high purity (99.99%) show improved phase purity and stability under light and heat relative to films made from raw precursors or precursors purified via retrograde powder crystallization (RPC) in 2-methoxyethanol, a method commonly utilized in recent reports of the highest-efficiency perovskite solar cells. In conclusion, single-crystal purification of precursors improves film stability under operational stressors, and the large enhancements in material purity provide a cleaner slate for improved isolation of compositional and additive effects on perovskite phase stability.

14 SOLAR ENERGY↗
DOE OSTI2021

Al-alkyls as acceptor dopant precursors for atomic-scale devices

Atomically precise ultradoping of silicon is possible with atomic resists, area-selective surface chemistry, and a limited set of hydride and halide precursor molecules, in a process known as atomic precision advanced manufacturing (APAM). It is desirable to expand this set of precursors to include dopants with organic functional groups and in this work we consider aluminium alkyls, to expand the applicability of APAM. We explore the impurity content and selectivity that results from using trimethyl aluminium and triethyl aluminium precursors on Si(001) to ultradope with aluminium through a hydrogen mask. Comparison of the methylated and ethylated precursors helps us understand the impact of hydrocarbon ligand selection on incorporation surface chemistry. Combining scanning tunneling microscopy and density functional theory calculations, we assess the limitations of both classes of precursor and extract general principles relevant to each.

36 MATERIALS SCIENCE↗