Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pore volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-pressure hydrogen decompression in sulfur crosslinked elastomers

High-pressure storage and cyclic (de)pressurization of hydrogen gas is known to result in degradation and failure of gas canisters, hoses, linings, and O-rings as the relatively small hydrogen molecule can readily permeate most materials. Hence, identifying material compositions that are less susceptible to hydrogen-induced damage is of significant importance to the hydrogen energy infrastructure. Here, we use classical atomistic molecular dynamics simulations to study hydrogen exposed ethylene-propylene-diene monomer (EPDM) rubber, an elastomer typically used in O-rings. We make chemical modifications to the model by adjusting the crosslink density and report on gas solubility, diffusivity, and molecular restructuring in response to rapid decompression. Our simulations indicate that increases in crosslink density can reduce volumetric expansion during decompression and result in smaller free volume pore sizes. However, these favorable properties for sealing materials come with a tradeoff. At pressure, crosslinks introduce extra free volume, providing potential sites for gas localization, the precursor to cavitation-induced failure.

08 HYDROGEN↗
DOE OSTI2021

Microstructural changes and mass transport in cement-based materials: A modeling approach

Highlights: • Concept to relate microstructural changes, mass transport, and chemical reactions in cement-based materials is presented. • Multi-physics modeling approach utilizing an extended version of the PNP equation and the geochemical code IPHREEQC. • Case studies indicate significant changes in mass transport properties due to alterations in the microstructure. • Microstructural changes depend on exposure and interactions between chemical reactions, pore structure, and mass transport. A generic modeling framework is presented to relate microstructural changes, i.e. changes in the pore volume distribution and phase assemblage, and mass transport in cement-based materials. The modeling framework accounts for mass transport and chemical equilibrium between ions in the pore solution and solid hydrates by means of an extended version of the Poisson-Nernst-Planck equation, in which the chemical equilibrium is solved by the external geochemical code IPHREEQC. Results of numerical studies concerning carbonation and leaching of a cement-based material indicate significant changes in mass transport properties due to chemical reactions leading to alterations in the microstructure. The resulting highly non-linear (both spatial and temporal) microstructural changes are thereby depending on the exposure and indicate that interactions between chemical reactions, pore structure changes, and mass transport have to be accounted for as a whole.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microstructural Changes to Thermally Sprayed Materials Subjected to Dynamic Compression

Dynamic compression of materials can induce a variety of microstructural changes. As thermally-sprayed materials have highly complex microstructures, the expected pressure at which changes occur cannot be predicted a priori. In addition, typical in-situ measurements such as velocimetry are unable to adequately diagnose microstructural changes such as failure or pore collapse. Quasi-isentropic compression experiments with sample recovery were conducted to examine microstructural changes in thermally sprayed tantalum and tantalum-niobium blends up to 8 GPa pressure. Spall fracture was observed in all tests, and post-shot pore volume decreased relative to the initial state. The blended material exhibited larger spall planes with fracture occurring at interphase boundaries. An estimate of the pressure at which pore collapse is complete was determined to be ~26 GPa for pure tantalum and ~19 GPa for the tantalumniobium blend under these loading conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Discovery of spontaneous de-interpenetration through charged point-point repulsions

Entanglement is an energetically favorable occurrence, pervasive in both nature and synthetic systems, where networks prefer to entwine with one another rather than remain open and accessible. As a result of entanglement, valuable internal pore space, useful for applications such as catalysis, storage, and sensing, is lost. Here, we detail our discovery of a phenomenon termed “charged point-point repulsion,” which energetically favors dis-entanglement, transforming a densely packed uranium-based framework with 14.2 and 19.8 Å pores into an open material with 40.7 Å pores and record-high void fraction and pore volume. We anticipate that the phenomenon described in this work could be widely generalized for the direct and systematic production of non-entangled structures with an abundance of valuable pore space and far-reaching practical importance. More fundamentally, this study compels a re-evaluation of the thermodynamics of porosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Manipulating Pore Topology and Functionality to Promote Fluorocarbon-Based Adsorption Cooling

With the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive the refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudo-compression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus increases in this working capacity directly translate to a more compact and efficient cooling system. How-ever, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance, and therefore has limited applicability. To this end, synthetic metal-organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host-guest chemistry and the role of framework pore topology. These molecular level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorb-ate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. Here this atomic level understanding of sorb-ate-sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we envision the capability to engineer designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interactions among soil texture, pore structure, and labile carbon influence soil carbon gains

Perennial vegetation with high plant diversity, e.g., restored prairie, is known for stimulation of soil carbon (C) gains, due in part to enhanced formation of pore structure beneficial for long-term C storage. However, the prevalence of this phenomenon across soils of different types remains poorly understood. The aim of the study was to assess the associations between pore structure, soil C, and their differences in monoculture switchgrass and polyculture restored prairie vegetation across a wide range of soils dominating the Upper Midwest of the USA. Six experimental sites were sampled, representing three soil types with texture ranging from sandy to silt loams. The two vegetation systems studied at each site were (i) monoculture switchgrass (Panicum virgatum L.), and (ii) polyculture restored prairie, also containing switchgrass as one of its species. X-ray computed micro-tomography (µCT) was employed to analyze soil pore structure. Structural equation modeling and multiple path analyses were used to assess direct and indirect effects of soil texture and pore characteristics on microbial biomass C (MBC), particulate organic matter (POM), dissolved organic C (DOC), short-term respiration (CO 2 ), and, ultimately, soil organic C (SOC). Across studied sites, prairie increased fractions of medium (50–150 µm Ø) pores by 11–45 %, SOC by 3–69 %, and MBC by 18–59 % (except for one site). The greater were the prairie-induced increases in the medium pore volumes, the greater were the prairie-induced SOC gains. Greater C losses via CO 2 and DOC contributed to slower C accumulation in the prairie soil. We surmise that the interactive feedback loop relating medium pores and soil C acts across a wide range of soil textures and is an important mechanism through which perennial vegetation with high plant diversity, such as restored prairie, promotes rapid SOC gains.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Understanding Pore Formation in ALD Alumina Overcoats

AlO X thin films deposited by atomic layer deposition (ALD) have previously been used to increase both stability and selectivity of supported palladium catalysts and are known to develop nanoscale porosity upon heating. Furthermore, understanding the factors that affect ALD thin film porosity would enable future design of layered catalytic structures with tunable nanoscale features on industrially relevant high surface area materials. In this study, porous and nonporous aluminum oxide supports with and without palladium nanoparticles were overcoated with thin films of 2 - 7 nm AlO X by ALD deposited at temperatures of 100 °C, 200 °C and 300 °C. Hydroxyl loss and changes in surface chemistry were observed upon heating the films, and changes in surface area and pore volume of the annealed films were correlated to AlO x deposition temperature and presence of Pd. Crystallization of the overcoat to γ-Al 2 O 3 is shown to occur separately from hydroxyl loss and pore formation. A mechanistic understanding of pore formation in AlO X ALD films is obtained by reference to studies of the structural transformations accompanying the formation of transition aluminas from hydroxide precursors. Additionally, a direct and tunable correlation is established between pore development and the overall hydroxyl content of AlO X ALD coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Characterizing Pore-Scale Geochemical Alterations in Eagle Ford and Barnett Shale from Exposure to Hydraulic Fracturing Fluid and CO 2 /H 2 O

As demand increases for an affordable energy source that is tied to an environmental obligation to reduce greenhouse gas emissions and water usage, there is a growing consideration in shale production utilizing processes such as 1) enhancing hydrocarbon recovery via carbon dioxide (CO 2 ) flooding, 2) using CO 2 as a fracturing agent to minimize water use, and 3) storing CO 2 in depleted shale formations to mitigate emissions to the atmosphere. Understanding the geochemical reactions and alterations that occur as shale is exposed to fluids and CO 2 is necessary to develop and optimize each of these processes for field applications. While the majority of shale formations are stimulated using traditional fracturing fluid, some may be fractured using CO 2 or other non-traditional means. We examine the effect fracturing fluid has on shale and how it behaves with secondary exposure to dry CO 2 or CO 2 -saturated water using in situ Fourier Transform infrared spectroscopy (FTIR), feature relocation scanning electron microscopy (SEM), and surface area and pore size analysis using volumetric gas sorption. These techniques were performed on Eagle Ford and Barnett shale samples that were exposed to fracturing fluid and unexposed (as received). Shales that have been exposed to traditional fracturing fluid experienced two reaction fronts. The first reaction front was formed during exposure to the fracturing fluid (pH of ~1.4). A secondary reaction front was formed as a result of CO 2 -saturated fluid exposure in the form of carbonic acid (pH ~5.6). These two different reaction mechanisms drove multiple dissolution and precipitation cycles which altered petrophysical properties of the shale and could lead to a significant impact on flow pathways. FTIR showed that equilibration of carbonate dissolution and precipitation cycles could take as long as 35 days. Samples exposed to fracturing fluid showed significantly less carbonate reactivity compared to those exposed to water. Pore size analysis results indicate exposure to fracturing fluid blocked small nanopores (10-15 nm) reducing BET surface area and total pore volume. SEM results show barite precipitated heavily during exposure to fracturing fluid. It appeared that carbonic acid was able to extract sulfur from organic matter to form gypsum evaporites. The mineralogical (barite precipitation and calcite dissolution/precipitation) and pore-scale alterations observed in these samples may lead to enhancement of flow pathways for injected CO 2 or produced hydrocarbons.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2022

A Fiber-Based 3D Lithium Host for Lean Electrolyte Lithium Metal Batteries

3D hosts are promising to extend the cycle life of lithium metal anodes but have rarely been implemented with lean electrolytes thus impacting the practical cell energy density. To overcome this challenge, a 3D host that is lightweight and easy to fabricate with optimum pore size that enables full utilization of its pore volume, essential for lean electrolyte operations, is reported. The host is fabricated by casting a VGCF (vapor-grown carbon fiber)-based slurry loaded with a sparingly soluble rubidium nitrate salt as an additive. The network of fibers generates uniform pores of ≈3 µm in diameter with a porosity of 80%, while the nitrate additive enhances lithiophilicity. This 3D host delivers an average coulombic efficiency of 99.36% at 1 mA cm -2 and 1 mAh cm -2 for over 860 cycles in half-cell tests. Full cells containing an anode with 1.35-fold excess lithium paired with LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathodes exhibit capacity retention of 80% over 176 cycles at C/2 under a lean electrolyte condition of 3 g Ah -1 . This work provides a facile and scalable method to advance 3D lithium hosts closer to practical lithium-metal batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Adsorption of molecular iodine and alkyl iodides from spent-nuclear-fuel-reprocessing off-gas using reduced silver mordenite

Radioactive iodine is a hazardous byproduct of spent-nuclear-fuel reprocessing that must be removed from the off-gas stream before it can be discharged. Reduced silver mordenite (Ag 0 Z) is currently the baseline material for iodine capture in the U.S. Although the performance characteristics and capture mechanisms of I 2 and CH 3 I have been established, similar investigations into long-chain organic iodides have yet to be performed. In this study, thin beds of Ag 0 Z were loaded with I 2 , CH 3 I, C 4 H 9 I, and C 12 H 25 I (5 ppm to 50 ppm) carried in a dry air stream at 150°C. The maximum iodine capacity was 105 ± 5 mg I/g Ag 0 Z for all species. Saturated Ag 0 Z samples were characterized using scanning electron microscopy, X-ray fluorescence, X-ray photoelectron spectroscopy, diffuse reflectance UV–visible spectroscopy, pair distribution function analysis, and thermogravimetric analysis. Further, near-complete Ag utilization and similar physical/chemical properties were observed for all samples. Through a comparison with previous studies and an investigation of aged Ag 0 Z, we propose that iodine species react with Ag + at exchange sites, forming α-AgI within the mordenite channels, and with surface Ag 0 nanoparticles, yielding β-/γ-AgI. The available Ag sites in the interior (Ag + ) and exterior (Ag 0 ) of mordenite determine the adsorption capacity since α-AgI formation is limited by the total pore volume. Potential iodine uptake routes were summarized for aging and non-aging environments. A scalable predictive model was implemented for deep-bed iodine removal, and predictions were in good agreement with experimental data. Sensitivity analysis suggests that iodine uptake kinetics is governed by pore diffusion.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Hydrogen Generation and Serpentinization of Olivine Under Flow Conditions

Serpentinization of olivine is often studied in the laboratory under batch conditions. Olivine conversion in situ with enhanced natural hydrogen production will likely be implemented via injection of aqueous solutions. Hence, transport is relevant to the extent of olivine reaction and, potentially, the morphology of precipitates formed. To test conditions for optimal H 2 generation and outcomes, serpentinization was induced by injecting pH = 12.5 brine at 0.015 cm 3 /min (0.5 pore volumes per day) into an olivine sand pack (250 to <355 μm grain size) at 245°C generating, at minimum 76 and 89 mol% H 2 at 35 and 57 d, respectively. Grain-coating serpentine with radiating needles cemented the reacted sand grains. Importantly, pore space was maintained between the dissolving grains and the serpentine precipitates. Hence, reactivity continued as a result of fluid access to mineral surfaces, the large grain size, and the continuous injection of undersaturated alkaline fluids.

08 HYDROGEN↗
DOE OSTI2024

Small-pore hydridic frameworks store densely packed hydrogen

Nanoporous materials have attracted great attention for gas storage, but achieving high volumetric storage capacity remains a challenge. Here, by using neutron powder diffraction, volumetric gas adsorption, inelastic neutron scattering and first-principles calculations, we investigate a magnesium borohydride framework that has small pores and a partially negatively charged non-flat interior for hydrogen and nitrogen uptake. Hydrogen and nitrogen occupy distinctly different adsorption sites in the pores, with very different limiting capacities of 2.33 H 2 and 0.66 N 2 per Mg(BH 4 ) 2 . Molecular hydrogen is packed extremely densely, with about twice the density of liquid hydrogen (144 g H 2 per litre of pore volume). We found a penta-dihydrogen cluster where H 2 molecules in one position have rotational freedom, whereas H 2 molecules in another position have a well-defined orientation and a directional interaction with the framework. This study reveals that densely packed hydrogen can be stabilized in small-pore materials at ambient pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

MOF Linker Extension Strategy for Enhanced Atmospheric Water Harvesting

A linker extension strategy for generating metal–organic frameworks (MOFs) with superior moisture-capturing properties is presented. Applying this design approach involving experiment and computation results in MOF-LA2-1 {[Al(OH)(PZVDC)], where PZVDC 2– is (E)-5-(2-carboxylatovinyl)-1H-pyrazole-3-carboxylate}, which exhibits an approximately 50% water capacity increase compared to the state-of-the-art water-harvesting material MOF-303. The power of this approach is the increase in pore volume while retaining the ability of the MOF to harvest water in arid environments under long-term uptake and release cycling, as well as affording a reduction in regeneration heat and temperature. Density functional theory calculations and Monte Carlo simulations give detailed insight pertaining to framework structure, water interactions within its pores, and the resulting water sorption isotherm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Compositional Control on Shale Pore Structure Characteristics across a Maturation Gradient: Insights from the Devonian New Albany Shale and Marcellus Shale in the Eastern United States

The pore structure characteristics of shales are controlled by their mineralogical and organic matter (OM) composition. However, the contributions by different components in shales at varying thermal maturities remain poorly understood. In this study, Devonian New Albany Shale and Marcellus Shale samples spanning a thermal maturity from marginally mature (vitrinite reflectance R o 0.55%) to post-mature (R o 2.41 %) were selected to study the control of composition on the pore structure properties of shales at different stages of thermal maturation. Scanning electron microscope (SEM) imaging was used to examine pore types in shales, and low-pressure N 2 and CO 2 adsorption analyses were used to quantitatively characterize the mesopore and micropore characteristics of bulk shales and major components in shales. The results show that matrix-associated pores including interparticle pores between silt-sized mineral grains, phyllosilicate framework pores, and intraparticle pores within mineral grains exist in all samples but become less common with increasing maturity, which is likely caused by elevated compaction, cementation, and occlusion with bitumen. Secondary organic pores were not observed under SEM at marginal maturity but were detected in the condensate–wet gas and dry gas windows, with more organic pores in the dry gas window. At marginal maturity, OM has large amounts of mesopores and micropores as demonstrated by low-pressure N 2 and CO 2 adsorption analyses of OM isolated from shales, even though no OM-hosted pores were observed under SEM. With increasing thermal maturity, the mesopore and micropore specific surface area of OM increase and make greater contributions to the pore structure properties of bulk shales. The mesopore and micropore properties of shales are controlled by OM content and maturity as well as by clay mineral type and content, and they can be estimated from the contribution of each component at different stages of thermal maturation. In conclusion, accurate evaluation of the pore volume and SSA of shales will have important implications for assessing gas adsorption and transport in shales.

03 NATURAL GAS↗
DOE OSTI2025

Probing Carbon Mineralization Mechanisms in Pore and Bulk Fluids by Harnessing Architected Calcium Silicates

The ability to synthesize materials with well-controlled pore structures gives us unprecedented control over probing fluid interactions with reactive interfaces and advancing calibrated insights into coupled chemo-morphological interactions. One of the primary challenges in developing crystalline silicate materials lies in achieving ordered pore structures. Existing approaches of producing amorphous mesoporous metal silicates via sol–gel methods and heat-treatment of these materials to produce crystalline phases cause the pore structures in the amorphous phases to collapse. To overcome this challenge, carbon coating of amorphous mesoporous calcium silicate particles is carried out to retain the pore structure, while the material is heated to produce crystalline calcium silicate with calcium sulfate inclusions. The pore diameter in these materials is about 3.9 nm, with a surface area and a pore volume of 28.75 m 2 /g and 0.092 cm 2 /g, respectively. The mechanisms of carbon mineralization are investigated by reacting architected calcium silicate with 1 M Na 2 CO 3 and monitoring the evolution in the structural phases using operando wide-angle X-ray scattering (WAXS) measurements. Formation of stable calcium carbonate polymorph or calcite and metastable calcium carbonate polymorph or vaterite in pore and bulk fluids, respectively, resulting from the reaction between Na 2 CO 3 and CaSiO 3 , are noted. The mechanisms associated with carbon mineralization are delineated using ReaxFF molecular dynamics (MD) simulations. The surface dissolution reaction is initiated by 2H + ions that replace a Ca 2+ ion in the Ca–silicate matrix. Ca 2+ ions in the solution initially react with water to form calcium hydroxide and eventually form calcium (bi)carbonate. A slow and gradual increase in the formation of sodium silicate in the solution resulting from the reactions of silicic acid or the silicon dioxide reaction with sodium hydroxide is noted. When carbon mineralization occurs in environments bearing interfacial fluids, calcite is the dominant calcium carbonate polymorph, as determined using experiments with pore fluids and molecular-scale simulations. In conclusion, these studies provide fundamental insights into the mechanisms underlying the carbon mineralization of calcium silicate informed by experiments and molecular-scale simulations.

Calcium↗
DOE OSTI2023

Minimizing exposure to legacy wells and avoiding conflict between storage projects: Exploring area of review as a screening tool

Elevated pressure from large-volume injection is a key driver of risk and project cost. If transmissive features (e.g., non-isolating wells or fracture systems) are present, increased injection-zone pressure can drive fluids from depth toward protected freshwater resources. In US Carbon Capture and Storage (CCS) law, the area at risk is known as the Area of Review (AoR). The size and number of potentially transmissive features to be evaluated and possibly remediated or managed is a function of the size and location of the AoR. The size of the AoR depends on several variables, including properties of the injection zone, properties of protected resources, and injection rate and duration. Evaluation of the intersection of these variables across a portfolio of sites highlights the injection zone depth and boundary conditions as top-level controls. Deep injection, use of multiple stacked injection zones, reduced injection rate and choice of injection well location can all be used to minimize AoR and the number of potentially transmissive features within it. Here, we introduce the concept of pressure space (defined as connected pore volume times pressure) as the key subsurface commodity for CO 2 storage and we suggest that it forms a more robust basis for leasing and regulation than pore space alone.

58 GEOSCIENCES↗
DOE OSTI2020

Sequentially coupled flow and geomechanical simulation with a discrete fracture model for analyzing fracturing fluid recovery and distribution in fractured ultra-low permeability gas reservoirs

More accurate characterization and prediction of the in-situ distribution of fracturing fluid in fractured reservoirs are needed for enhancing well productivity. In this study, an implicit-sequentially coupled flow/geomechanics simulator incorporating an efficient discrete fracture model is developed to model fluid distribution and recovery performance of ultra-low permeability gas reservoirs. The finite-volume and finite-element methods are used for space discretization of the flow and geomechanics equations, respectively, while the backward Euler method is employed for time discretization. The flow and geomechanics equations are solved sequentially based on fixed-stress splitting. An efficient discrete-fracture model is used to explicitly model the fractured system. Flexible unstructured gridding is employed to model arbitrarily-oriented fractures. The interrelations among pore volume, permeability and geomechanical conditions are considered dynamically using two-way coupled flow and geomechanics computations. The geometry of fracture (networks) due to hydraulic fracturing has significant impacts on the fracturing fluid recovery efficiency and ensuing fluid distribution. Under the same injection volume, the fracturing fluid recovery is higher when the fracture geometry is planar. Fluid recovery is relatively lower whenever natural fractures are activated during fracturing treatments; flowback time is also shortened when complex fracture network with enlarged fracture interface is present. Fracturing fluid in hydraulic fractures may leak off into the natural fractures and subsequently imbibes into the surrounding matrix due to capillarity effects. The fracturing fluid recovery and in-situ fluid distribution are sensitive to the shut-in duration and fracture closure behavior. This study analyzes the coupled flow-geomechanical responses of fractured gas reservoirs during the post-fracturing periods. Understanding the fate of the fracturing fluid can provide insights on, to some extent, the stimulated fracture volume, size of the water invasion zone, and efficiency of the fracturing design. The simulation predictions can also provide more accurate initial reservoir conditions (e.g. distributions of different phases and pressure) for long-term well performance estimation.

42 ENGINEERING↗
DOE OSTI2020

Surface and bulk characterization of reservoir and cap-rocks: Past, present, and future

Geologic formations provide potentially some of the largest volume capacities for CO 2 storage or sequestration. Potential storage sites can be deep saline aquifers, depleted oil reservoirs, and coal seams, surrounded by sealing layers to prevent CO 2 from leaking. It is therefore critical to understand mechanisms contributing to CO 2 trapping and CO 2 leaks. Both phenomena are governed by reactions at the interfaces of the reservoir and cap-rocks and are controlled by the complex chemistry and pore structures of rocks. Mechanisms at the macroscale are affected by the processes occurring at the nanoscale. This review highlights the necessity of multitechnique, multiscale characterization of rocks and points to the importance of surface analysis and surface science studies. Two shale rocks (seals) from Niobrara and Agardhfjellet formations with complex surface chemistry are used as examples throughout the paper. Typically, evaluation of rocks with x-ray diffraction, thermogravimetric analysis, Rock-Eval pyrolysis, gas adsorption, and electron microscopy combined with energy dispersive x-ray spectroscopy is conducted to provide valuable information about the bulk mineralogy, elemental composition, pore volume, and adsorbed species on the sample surface. These studies are necessary prior to designing surface sensitive experiments with x-ray photoelectron spectroscopy (XPS), guiding both sample preparation and sample analysis. XPS has been widely used to study the surface composition of rocks during the investigations of their fine-scale wettability, and the main findings are highlighted here. This paper also reviews the existing literature on ambient-pressure XPS, which provides new opportunities to study in situ chemical alteration due to interactions with CO 2 and offers recommendations for adapting this technique to study rock-fluid interactions, allowing for the identification of fundamental interactions during CO 2 sequestration and guide selection of formation sites for improved storage.

54 ENVIRONMENTAL SCIENCES↗