Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Population Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The interstellar medium

Observations and models of interstellar matter in the Milky Way are reviewed. The general structure of the gas layer, high velocity gas, and heavy element depletion patterns are outlined. The IUE survey of Fe and Si abundances, and the correlation of Fe and Si depletions with infrared cirrus are described. Studies of neutral hydrogen may disagree with three-phase models of the interstellar medium, dominated by supernova remnants. The effects of shock waves on interstellar medium structure, the grain population, and refractory element abundances are considered. It appears that the frequency, distribution, energy, and dynamical effects of supernovae in the galaxy may be overestimated.

Shull, J. Michael↗

Mineralization through geologic time: Evolution of continental crust

In analogy to living systems, geologic entities (e.g., rocks, mineral deposits, tectonic realms and domains) are involved in the process of perpetual generation and destruction (birth/death cycles). This results in time distribution patterns akin to age structures in living populations and the systematics is amenable to treatment by the concepts of population dynamics. Utilizing this theoretical approach, the survivorship patterns for major realms of the plate tectonic system, for consitutent rocks, and for the entombed mineral resources are predicted. The present inventory encompasses global economic accumulations of metals by geologic age. The deposits of these metals were assigned to nine broad genetic categories, with an attempt to relate each category to tectonic setting within the framework of global plate tectonics.

Veizer, Jan↗

Medium resolution studies of extreme ultraviolet emission from N2 by electron impact - The effect of predissociation on the emission cross section of the b 1Pi(u) state

The electron impact induced fluorescence spectrum of N2 is measured in the 102-134 nm range at a 0.05 nm spectral resolution. The spectral measurements provide the emission cross sections of the transitions of the b 1Pi(u)-X 1Sigma(+)g Birge-Hopfield I-band system. The structure and vibrational population distribution of this system are strongly affected by a configuration interaction of the valence b 1Pi(u) and Rydberg c 1Pi(u) and o 1Pi(u) states. The excitation function (0-400 eV) for the b-X (1,2) transition is measured and a modified Born approximation analytic model is applied to calculate the oscillator strength for the b 1Pi(u)-X band system. With the exception of the v-prime = 1 level, vibrational levels of the b 1Pi(u) state predissociate with a branching ratio of between 0.95 and 1.00. Predissociation of the b 1Pi(u) state contributes approximately six percent of the total dissociation cross section of N2 by electron impact at 100 eV.

James, Geoffrey K.↗

Sonic boom predictions using a modified Euler code

The environmental impact of a next generation fleet of high-speed civil transports (HSCT) is of great concern in the evaluation of the commercial development of such a transport. One of the potential environmental impacts of a high speed civilian transport is the sonic boom generated by the aircraft and its effects on the population, wildlife, and structures in the vicinity of its flight path. If an HSCT aircraft is restricted from flying overland routes due to excessive booms, the commercial feasibility of such a venture may be questionable. NASA has taken the lead in evaluating and resolving the issues surrounding the development of a high speed civilian transport through its High-Speed Research Program (HSRP). The present paper discusses the usage of a Computational Fluid Dynamics (CFD) nonlinear code in predicting the pressure signature and ultimately the sonic boom generated by a high speed civilian transport. NASA had designed, built, and wind tunnel tested two low boom configurations for flight at Mach 2 and Mach 3. Experimental data was taken at several distances from these models up to a body length from the axis of the aircraft. The near field experimental data serves as a test bed for computational fluid dynamic codes in evaluating their accuracy and reliability for predicting the behavior of future HSCT designs. Sonic boom prediction methodology exists which is based on modified linear theory. These methods can be used reliably if near field signatures are available at distances from the aircraft where nonlinear and three dimensional effects have diminished in importance. Up to the present time, the only reliable method to obtain this data was via the wind tunnel with costly model construction and testing. It is the intent of the present paper to apply a modified three dimensional Euler code to predict the near field signatures of the two low boom configurations recently tested by NASA.

Siclari, Michael J.↗

Grain Boundary Engineering the Mechanical Properties of Allvac 718Plus(Trademark) Superalloy

Grain Boundary Engineering can enhance the population of structurally-ordered "low S" Coincidence Site Lattice (CSL) grain boundaries in the microstructure. In some alloys, these "special" grain boundaries have been reported to improve overall resistance to corrosion, oxidation, and creep resistance. Such improvements could be quite beneficial for superalloys, especially in conditions which encourage damage and cracking at grain boundaries. Therefore, the effects of GBE processing on high-temperature mechanical properties of the cast and wrought superalloy Allvac 718Plus (Allvac ATI) were screened. Bar sections were subjected to varied GBE processing, and then consistently heat treated, machined, and tested at 650 C. Creep, tensile stress relaxation, and dwell fatigue crack growth tests were performed. The influences of GBE processing on microstructure, mechanical properties, and associated failure modes are discussed.

Gabb, Timothy P.↗

Bulge Growth and Quenching Since Z=2.5 in Candels/3D-HST

Exploiting the deep high-resolution imaging of all 5 CANDELS fields, and accurate redshift informationprovided by 3D-HST, we investigate the relation between structure and stellar populations fora mass-selected sample of 6764 galaxies above 1010 M, spanning the redshift range 0.5 z 2.5.For the first time, we fit 2-dimensional models comprising a single Sersic fit and two-component (i.e.,bulge + disk) decompositions not only to the H-band light distributions, but also to the stellar massmaps reconstructed from resolved stellar population modeling. We confirm that the increased bulgeprominence among quiescent galaxies, as reported previously based on rest-optical observations, remainsin place when considering the distributions of stellar mass. Moreover, we observe an increaseof the typical Sersic index and bulge-to-total ratio (with median BT reaching 40-50) among starforminggalaxies above 1011 M. Given that quenching for these most massive systems is likely tobe imminent, our findings suggest that significant bulge growth precedes a departure from the starformingmain sequence. We demonstrate that the bulge mass (and ideally knowledge of the bulge andtotal mass) is a more reliable predictor of the star-forming versus quiescent state of a galaxy thanthe total stellar mass. The same trends are predicted by the state-of-the-art semi-analytic model bySomerville et al. In the latter, bulges and black holes grow hand in hand through merging andordisk instabilities, and AGN-feedback shuts off star formation. Further observations will be requiredto pin down star formation quenching mechanisms, but our results imply they must be internal to thegalaxies and closely associated with bulge growth.

Quenching↗

New Mission Concept: Investigation of the Galactic Center with the Galactic Center Explorer (GalCenEx)

The European Space Observatory INTEGRAL has been providing excellent results on X-ray and γ–ray astronomy since its launch in 2002. Among the most important results are the spectroscopy and imaging measurements of celestial γ-ray sources, including mapping the 511 keV radiation from the Galactic plane. However, the nature of the 511 keV positron annihilation line around the Galactic Center region is still a mystery. Similarly, the structure and nature of the Galactic Center supermassive black hole and its surroundings, as well as the structure of heavily populated sky regions such as Cygnus and Carina in γ-rays, remain unclear. We present a concept of a potential next-generation γ-ray telescope with the major science objectives: a) solve the mystery of the Galactic Center region 511 keV positron annihilation line by mapping the Galactic Center region with high energy (<1% FWHM) and angular (< 10 arcmin) resolution and with line sensitivity <10-5 ph cm-2 s-1; b) understand the nature of the Galactic Center supermassive black hole environment by creating a high-resolution spectral and intensity map of the surrounding region in 0.1 – 20 MeV γ rays; and c) explore Galactic chemical evolution and sites of explosive element synthesis by conducting high-sensitivity measurements of nuclear lines from Type 1a supernovae and other objects. The instrument is based on a novel high energy and position resolution CdZnTe Imager, coded aperture mask, and heavy-scintillator shield, and can be considered for a NASA Explorer mission.

Moiseev, Alexander↗

A Deep and Wide Twilight Survey for Asteroids Interior to Earth and Venus

We are conducting a survey using twilight time on the Dark Energy Camera with the Blanco 4 m telescope in Chile to look for objects interior to Earth's and Venus' orbits. To date we have discovered two rare Atira/Apohele asteroids, 2021 LJ4 and 2021 PH27, which have orbits completely interior to Earth's orbit. We also discovered one new Apollo-type Near Earth Object (NEO) that crosses Earth's orbit, 2022 AP7. Two of the discoveries have diameters ≳1 km. 2022 AP7 is likely the largest Potentially Hazardous Asteroid (PHA) discovered in about eight years. To date we have covered 624 square degrees of sky near to and interior to the orbit of Venus. The average images go to 21.3 mag in the *r* band, with the best images near 22nd mag. Our new discovery 2021 PH27 has the smallest semimajor axis known for an asteroid, 0.4617 au, and the largest general relativistic effects (53 arcsec/century) known for any body in the solar system. The survey has detected ∼15% of all known Atira NEOs. We put strong constraints on any stable population of Venus co-orbital resonance objects existing, as well as the Atira and Vatira asteroid classes. These interior asteroid populations are important to complete the census of asteroids near Earth, including some of the most likely Earth impactors that cannot easily be discovered in other surveys. Comparing the actual population of asteroids found interior to Earth and Venus with those predicted to exist by extrapolating from the known population exterior to Earth is important to better understand the origin, composition, and structure of the NEO population.

Scott S. Sheppard↗

A Case Study for Probabilistic Methods Validation (MSFC Center Director's Discretionary Fund, Project No. 94-26)

Probabilistic method is not a universally accepted approach for the design and analysis of aerospace structures. The validity of this approach must be demonstrated to encourage its acceptance as it viable design and analysis tool to estimate structural reliability. The objective of this Study is to develop a well characterized finite population of similar aerospace structures that can be used to (1) validate probabilistic codes, (2) demonstrate the basic principles behind probabilistic methods, (3) formulate general guidelines for characterization of material drivers (such as elastic modulus) when limited data is available, and (4) investigate how the drivers affect the results of sensitivity analysis at the component/failure mode level.

Price J. M.↗

Latitudinal and field-aligned cosmic ray gradients 2 to 5 AU Voyagers 1 and 2 and IMP 8

Results are presented showing that the contemporary picture of a relatively small heliocentric radial gradient is generally correct. They emphasize that such a gradient should really be thought of in terms of field-aligned structures since the cosmic ray populations tend to 'corotate' locally with the interplanetary field structure. Nonuniform latitudinal gradients of approximately 2 to 5 percent/deg in structures lasting 10 to 30 days are identified unambiguously. Additional evidence is seen for somewhat smaller latitudinal gradients often north to south and probably mixed with small field-aligned gradients of less than 1 percent/AU that persist for several solar rotations. It is suggested that these smallest ephemeral latitudinal gradients manifest themselves by affecting the degree of irregularity in diurnal variations of high latitude neutron monitors.

Roelof, E. C.↗

Biodiversity within hot spring microbial mat communities: molecular monitoring of enrichment cultures

We have begun to examine the basis for incongruence between hot spring microbial mat populations detected by cultivation or by 16S rRNA methods. We used denaturing gradient gel electrophoresis (DGGE) to monitor enrichments and isolates plated therefrom. At near extincting inoculum dilutions we observed Chloroflexus-like and cyanobacterial populations whose 16S rRNA sequences have been detected in the 'New Pit' Spring Chloroflexus mat and the Octopus Spring cyanobacterial mat. Cyanobacterial populations enriched from 44 to 54 degrees C and 56 to 63 degrees C samples at near habitat temperatures were similar to those previously detected in mat samples of comparable temperatures. However, a lower temperature enrichment from the higher temperature sample selected for the populations found in the lower temperature sample. Three Thermus populations detected by both DGGE and isolation exemplify even more how enrichment may bias our view of community structure. The most abundant population was adapted to the habitat temperature (50 degrees C), while populations adapted to 65 degrees C and 70 degrees C were 10(2)- and 10(4)-fold less abundant, respectively. However, enrichment at 70 degrees C favored the least abundant strain. Inoculum dilution and incubation at the habitat temperature favored the more numerically relevant populations. We enriched many other aerobic chemoorganotrophic populations at various inoculum dilutions and substrate concentrations, most of whose 16S rRNA sequences have not been detected in mats. A common feature of numerically relevant cyanobacterial, Chloroflexus-like and aerobic chemorganotrophic populations, is that they grow poorly and resist cultivation on solidified medium, suggesting plating bias, and that the medium composition and incubation conditions may not reflect the natural microenvironments these populations inhabit.

Non-NASA Center↗

Internal Structural Design of the Common Research Model Wing Box for Aeroelastic Tailoring

This work explores the use of alternative internal structural designs within a full-scale wing box structure for aeroelastic tailoring, with a focus on curvilinear spars, ribs, and stringers. The baseline wing model is a fully-populated, cantilevered wing box structure of the Common Research Model (CRM). Metrics of interest include the wing weight, the onset of dynamic flutter, and the static aeroelastic stresses. Twelve parametric studies alter the number of internal structural members along with their location, orientation, and curvature. Additional evaluation metrics are considered to identify design trends that lead to lighter-weight, aeroelastically stable wing designs. The best designs of the individual studies are compared and discussed, with a focus on weight reduction and flutter resistance. The largest weight reductions were obtained by removing the inner spar, and performance was maintained by shifting stringers forward and/or using curvilinear ribs: 5.6% weight reduction, a 13.9% improvement in flutter speed, but a 3.0% increase in stress levels. Flutter resistance was also maintained using straight-rotated ribs although the design had a 4.2% lower flutter speed than the curved ribs of similar weight and stress levels were higher. For some configurations, the differences between curved and straight ribs were smaller, which provides motivation for future optimization-based studies to fully exploit the trade-offs.

Jutte, Christine V.↗

Stellar populations; Proceedings of the Meeting, Baltimore, MD, May 20-22, 1986

Various papers covering recent findings on stellar populations are presented. The topics addressed include: the bulges of the Galaxy and M31, kinematics of the local subdwarfs and the collapse of the Galaxy, the red stellar population of the local group dwarf galaxies, globular clusters in the local group galaxies, the initial mass function, and star formation histories of galactic disks. Also discussed are: yield and abundance constraints on galactic chemical evolution, population synthesis in early type galaxies, the evolution of stellar populations in galaxies, a theoretical perspective on spectral evolution of galaxies, and the structure and kinematics of galaxy populations.

Norman, Colin A.↗

Asteroid families - An initial search

A stereo examination was conducted for clusters in three-dimensional proper element space within a sample of both numbered and faint Palomar-Leiden Survey (PLS) asteroids. The clusters were then objectively filtered for small Poisson probability of chance occurrence; 104 were accepted as families with 4- to 12-member populations, and are interpreted as impact-generated. Structure is common in the well-populated families: the better-sampled families are accordingly discussed in terms of their geometry and taxonomy. Some families are very rich in faint PLS members.

Williams, James G.↗

Galactic distribution of pulsars

The density distributions of pulsars in luminosity, period, Z-distance, and galactocentric distance were derived using a uniform sample of pulsars detected during a 408 MHz pulsar survey at Jodrell Bank. There are indications of a fine scale structure in the spatial distribution and evidence that there is a general correlation with other galactic populations and the overall spiral structure. The electron layer in the galaxy is shown to be wider than the pulsar layer and uniform on a large scale. The number of pulsars in the galaxy was estimated and used to derive the pulsar birthrate.

Seiradakis, J. H.↗

Galactic distribution of pulsars

The density distributions of pulsars in luminosity, period, Z-distance, and galactocentric distance were derived, using a uniform sample of pulsars detected during a 408-MHz pulsar survey at Jodrell Bank. There are indications of a fine-scale structure in the spatial distributions and evidence that there is a general correlation with other galactic populations and the overall spiral structure. The electron layer in our galaxy is shown to be wider than the pulsar layer and uniform on a large scale. The number of pulsars in the galaxy has been estimated and used to derive the pulsar birthrate.

Seiradakis, J. H.↗