Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Poisson approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

A solution method for the unsteady incompressible Navier-Stokes equations in generalized coordinate systems

A solution method based on a fractional step approach is developed for obtaining time-dependent solutions of the three-dimensional, incompressible Navier-Stokes equations in generalized coordinate systems. The governing equations are discretized conservatively by finite volumes using a staggered mesh system. The primitive variable formulation uses the volume fluxes across the faces of each computational cell as dependent variables. This procedure, combined with accurate and consistent approximations of geometric parameters, is done to satisfy the discretized mass conservation equation to machine accuracy as well as to gain favorable convergence properties of the Poisson solver. The discretized equations are second-order-accurate in time and space and no smoothing terms are added. An approximate-factorization scheme is implemented in solving the momentum equations. A novel ZEBRA scheme with four-color ordering is devised for the efficient solution of the Poisson equation. Several two and three-dimensional solutions are compared with other numerical and experimental results to validate the present method.

Rosenfeld, Moshe↗

Fast direct numerical solution of the nonhomogeneous Cauchy-Riemann equations

A fast direct (noniterative) 'Cauchy-Riemann Solver' is developed for solving the finite-difference equations representing systems of first-order elliptic partial differential equations in the form of the nonhomogeneous Cauchy-Riemann equations. The method is second-order accurate and requires approximately the same computer time as a fast cyclic-reduction Poisson solver. The accuracy and efficiency of the direct solver are demonstrated in an application to solving an example problem in aerodynamics: subsonic inviscid flow over a biconvex airfoil. The analytical small-perturbation solution contains singularities, which are captured well by the computational technique. The algorithm is expected to be useful in nonlinear subsonic and transonic aerodynamics.

Lomax, H.↗

Extensions to the classical calculation of the effect of mutual shadowing in diffuse reflection

The classical method for accounting for the mutual shadowing among closely packed particles in multiple scattering calculations is extended in the following ways. (1) By modeling the particle distribution by a Poisson process with a varying density parameter, a 'Van der Waals' type approximation allows extension to a greater fractional volume density, D. In this case it is only required that D squared be much less than 1 instead of D being much less than 1. (2) In the case that the particle distribution is not uniform the classical calculation may be weighted by the pair correlation function of the distribution. (3) The use of the Markov chain formalism for radiative transfer allows inclusion of the effect of shadowing for two orders of scattering. For conditions such as might apply in Saturn's rings, the inclusion of this effect makes less than a 0.1% difference in the calculated phase curves, compared to previous calculations which have included shadowing only in the first scattering. The latter are thus shown to be quite accurate.

Esposito, L. W.↗

The electrostatics of a dusty plasma

The potential distribution in a plasma containing dust grains were derived where the Debye length can be larger or smaller than the average intergrain spacing. Three models were treated for the grain-plasma system, with the assumption that the system of dust and plasma is charge-neutral: a permeable grain model, an impermeable grain model, and a capacitor model that does not require the nearest neighbor approximation of the other two models. A gauge-invariant form of Poisson's equation was used which is linearized about the average potential in the system. The charging currents to a grain are functions of the difference between the grain potential and this average potential. Expressions were obtained for the equilibrium potential of the grain and for the gauge-invariant capacitance between the grain and the plasma. The charge on a grain is determined by the product of this capacitance and the grain-plasma potential difference.

Whipple, E. C.↗

Piezoelectric Field Enhanced Second-Order Nonlinear Optical Susceptibilities in Wurtzite GaN/AlGaN Quantum Wells

Second-order nonlinear optical processes including second-harmonic generation, optical rectification, and difference-frequency generation associated with intersubband transitions in wurtzite GaN/AlGaN quantum well (QW) are investigated theoretically. Taking into account the strain-induced piezoelectric (PZ) effects, we solve the electronic structure of the QW from coupled effective-mass Schrodinger equation and Poisson equation including the exchange-correlation effect under the local-density approximation. We show that the large PZ field in the QW breaks the symmetry of the confinement potential profile and leads to large second-order susceptibilities. We also show that the interband optical pump-induced electron-hole plasma results in an enhancement in the maximum value of the nonlinear coefficients and a redshift of the peak position in the nonlinear optical spectrum. By use of the difference-frequency generation, THz radiation can be generated from a GaN/Al(0.75)Ga(0.25)N with a pump laser of 1.55 micron.

Liu, Ansheng↗

Rayleigh-Sommerfield Diffraction vs Fresnel-Kirchhoff, Fourier Propagation and Poisson's Spot

The boundary conditions imposed on the diffraction problem in order to obtain the Fresnel-Kirchhoff (FK) solution are well-known to be mathematically inconsistent and to be violated by the solution when the observation point is close to the diffracting screen 1-3. These problems are absent in the Rayleigh-Sommerfeld (RS) solution. The difference between RS and FK is in the inclination factor and is usually immaterial because the inclination factor is approximated by unity. But when this approximation is not valid, FK can lead to unacceptable answers. Calculating the on-axis intensity of Poisson s spot provides a critical test, a test passed by RS and failed by FK. FK fails because (a) convergence of the integral depends on how it is evaluated and (b) when the convergence problem is xed, the predicted amplitude at points near the obscuring disk is not consistent with the assumed boundary conditions.

RS (RAYLEIGH SOMMERFELD)↗

An implicit, transonic, full-potential code for cascade flow on H-grid topology

A transonic, full-potential code is developed for computing the flow through two-dimensional cascades using an H-type grid topology that employs an implicit approximate-factorization scheme. The body-conforming H-grid is generated numerically by solving Poisson's equation. The flow-solution algorithm at the coordinate mapping singularity associated with this grid is investigated using two different types of finite-difference schemes. The grid-geometry effect on these schemes is also studied by noting free-stream capturing properties. It is found that by implementing a consistent spatial differencing scheme, the mapping singularities can be resolved numerically, and the grid-geometry-induced error minimized. The code is verified by computing model cascade flow problems.

Kwak, D.↗

Efficient numerical simulation of electron states in quantum wires

A new algorithm is presented for the numerical simulation of electrons in a quantum wire as described by a two-dimensional eigenvalue problem for Schroedinger's equation coupled with Poisson's equation. Initially, the algorithm employs an underrelaxed fixed point iteration to generate an approximation which is reasonably close to the solution. Subsequently, this approximate solution is employed as an initial guess for a Jacobian-free implementation of an approximate Newton method. In this manner the nonlinearity in the model is dealt with effectively. The effectiveness of this approach is demonstrated in a set of numerical experiments which study the electron states on the cross section of a quantum wire structure based on III-V semiconductors at 4.2 and 77 K.

Kerkhoven, Thomas↗

A fractional step solution method for the unsteady incompressible Navier-Stokes equations in generalized coordinate systems

The time-dependent, three-dimensional incompressible Navier-Stokes equations are presently solved in generalized coordinate systems by means of a fractional-step method whose primitive variable formulation uses as dependent variables, in place of the Cartesian components of the velocity: (1) pressure (defined at the center of the computational cell), and (2) volume fluxes across the faces of the cells. The momentum equations are solved by means of an approximate factorization method. A novel 'ZEBRA' scheme incorporating four-color ordering efficiently solves the Poisson equation. Illustrative two- and three-dimensional laminar flow test cases are computed and evaluated relative to extant numerical and experimental results, and good agreement is obtained.

Rosenfeld, Moshe↗

Seismic investigation of the lunar interior

The velocity and attenuation structure of the moon below the crust is examined using surface events. The moon is divided into an upper mantle and a lower mantle, the division at a depth of about 500 km being marked by a reflector identified on polarization filtered record sections. The upper mantle has a P-wave velocity of about 8 km/sec, a Poisson's ratio of about 0.25 and a Q for P waves of about 5000. This region contains no partial melt and is depleted in volatiles, notably water. The lower mantle has a lower S-wave velocity and probably a lower P-wave velocity than the upper mantle, with a Poisson's ratio of about 0.34. The lower mantle has a Q for P waves of approximately 1500, substantially lower than the upper mantle but probably still high enough to preclude partial melting. The velocity structure and the current value of the moment of inertia factor indicate an increase of density below about 500 km, perhaps due to an increase in iron content. We do not have any information directly pertaining to seismic velocities below 1000 km depth.

Dainty, A. M.↗

Multigrid, Fractional-Step Computation Of Flow

Speed of computer code solving three-dimensional Navier-Stokes equations of flow of incompressible fluid by fractional-step method increased significantly by use of multigrid procedures. In method, equations solved on general nonorthogonal curvilinear coordinate grid, using volume fluxes. At each time step, computations performed in two fractional steps. In first step, equations of conservation of momentum solved by use of gradient of pressure from previous time step via explicit approximate-factorization method, yielding approximate flow field that does not satisfy equation of conservation of mass. In second step, discrete Poisson-like equation with Neumann-type boundary conditions, formed by combining equations of conservation of momentum and mass, solved iteratively.

Kwak, Dochan↗

A Methodology for Quantifying Certain Design Requirements During the Design Phase

A methodology for developing and balancing quantitative design requirements for safety, reliability, and maintainability has been proposed. Conceived as the basis of a more rational approach to the design of spacecraft, the methodology would also be applicable to the design of automobiles, washing machines, television receivers, or almost any other commercial product. Heretofore, it has been common practice to start by determining the requirements for reliability of elements of a spacecraft or other system to ensure a given design life for the system. Next, safety requirements are determined by assessing the total reliability of the system and adding redundant components and subsystems necessary to attain safety goals. As thus described, common practice leaves the maintainability burden to fall to chance; therefore, there is no control of recurring costs or of the responsiveness of the system. The means that have been used in assessing maintainability have been oriented toward determining the logistical sparing of components so that the components are available when needed. The process established for developing and balancing quantitative requirements for safety (S), reliability (R), and maintainability (M) derives and integrates NASA s top-level safety requirements and the controls needed to obtain program key objectives for safety and recurring cost (see figure). Being quantitative, the process conveniently uses common mathematical models. Even though the process is shown as being worked from the top down, it can also be worked from the bottom up. This process uses three math models: (1) the binomial distribution (greaterthan- or-equal-to case), (2) reliability for a series system, and (3) the Poisson distribution (less-than-or-equal-to case). The zero-fail case for the binomial distribution approximates the commonly known exponential distribution or "constant failure rate" distribution. Either model can be used. The binomial distribution was selected for modeling flexibility because it conveniently addresses both the zero-fail and failure cases. The failure case is typically used for unmanned spacecraft as with missiles.

Adams, Timothy↗

Low-Velocity Impact Response of Sandwich Beams with Functionally Graded Core

The problem of low-speed impact of a one-dimensional sandwich panel by a rigid cylindrical projectile is considered. The core of the sandwich panel is functionally graded such that the density, and hence its stiffness, vary through the thickness. The problem is a combination of static contact problem and dynamic response of the sandwich panel obtained via a simple nonlinear spring-mass model (quasi-static approximation). The variation of core Young's modulus is represented by a polynomial in the thickness coordinate, but the Poisson's ratio is kept constant. The two-dimensional elasticity equations for the plane sandwich structure are solved using a combination of Fourier series and Galerkin method. The contact problem is solved using the assumed contact stress distribution method. For the impact problem we used a simple dynamic model based on quasi-static behavior of the panel - the sandwich beam was modeled as a combination of two springs, a linear spring to account for the global deflection and a nonlinear spring to represent the local indentation effects. Results indicate that the contact stiffness of thc beam with graded core Increases causing the contact stresses and other stress components in the vicinity of contact to increase. However, the values of maximum strains corresponding to the maximum impact load arc reduced considerably due to grading of thc core properties. For a better comparison, the thickness of the functionally graded cores was chosen such that the flexural stiffness was equal to that of a beam with homogeneous core. The results indicate that functionally graded cores can be used effectively to mitigate or completely prevent impact damage in sandwich composites.

Apetre, N. A.↗

A numerical method for solving the Vlasov equation

A numerical procedure is derived for the solution of the Vlasov-Poisson system of equations in two phase-space variables. Derivatives with respect to the phase-space variables are approximated by a weighted sum of the values of the distribution function at property chosen neighboring points. The resulting set of ordinary differential equations is then solved by using an appropriate time intergration scheme. The accuracy of the proposed method is tested with some simple model problems. The results for the free streaming case, linear Landau damping, and nonlinear Landau damping are investigated and compared with those of the splitting scheme. The proposed method is found to be very accurate and efficient.

Satofuka, N.↗

Analysis and control of hourglass instabilities in underintegrated linear and nonlinear elasticity

Methods are described to identify and correct a bad finite element approximation of the governing operator obtained when under-integration is used in numerical code for several model problems: the Poisson problem, the linear elasticity problem, and for problems in the nonlinear theory of elasticity. For each of these problems, the reason for the occurrence of instabilities is given, a way to control or eliminate them is presented, and theorems of existence, uniqueness, and convergence for the given methods are established. Finally, numerical results are included which illustrate the theory.

Jacquotte, Olivier P.↗

Approximate factorization with an elliptic pressure solver for incompressible flow

Two-dimensional curvilinear coordinates are used to solve the incompressible Navier-Stokes equations, in conjunction with approximate factorization for the solution of the momentum equation and the successive overrelaxation by lines method for the solution of a Poisson equation for the pressure. The combined algorithm, although not fully explicit, is marginally stable at Reynolds numbers lower than 10,000 and time increments of 0.01. Pressure distributions calculated for attack angles of zero and 6 deg are of the same shape as the experimental curves, but are shifted to one side.

Bernard, R. S.↗

Fragmentation in stellar collapse

A three dimensional Cartesian code was developed to model molecular cloud collapse and protostellar formation. The basic Eulerian scheme employs spatially second-order accurate, finite difference methods to advance the fluid variables in time. The hydrodynamic equations governing the collapse include the effects of self-gravity, rotation, and radiative transfer. Supplementary equations include Poisson's equation which relates the gravitational potential to the density distribution and a mean intensity equation derived with the Eddington approximation for radiative transfer. The gas pressures and internal energies are determined from equations of state derived for a molecular cloud composed of hydrogen, helium, and heavier elements.

Myhill, E. M.↗