Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Permanent magnet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Summary of Results for Idaho Accelerator Center (IAC) Experiments with Compact Electron Permanent Magnet Spectrometer (CEPMS)

The Compact Electron Permanent Magnet Spectrometer (CEPMS) shown in Figure 2 consists of collimation at the electron beam entrance, a vacuum chamber for beam transport and a removable 60 degree sector magnet constructed by SABR Enterprises (Ref 2) that is used to momentum analyze the incoming electron beam. There are electron detection planes located perpendicular to straight through and the 60 degree trajectory ports. The planes are designed to accept phosphor screens for time integrated measurements. The screens can be replaced by scintillator for time resolved measurements using gated or streak cameras. The length of the spectrometer along the beamline without the collimator is about 400mm (14”). The spectrometer requires no power supply with controls for cycling or cooling for the magnet. The entire assembly, with magnet installed, weighs about 35kg (75lbs) Figure 3 depicts central and extreme trajectories through the spectrometer for various electron energies. The chamber accommodates a +/-50mm wide detection field relative to the center trajectory. Trajectories with larger momentum (energy) are bent the least. Since the permanent magnet slides off and on with reference to the upstream edge of the vacuum chamber, it can be adjusted to various positions to slightly increase or decrease the central energy thereby changing the range of available energies. Figure 4 shows the effect of changing the location of the permanent magnet on the electron trajectory. A small inward change in r produces a longer trajectory in the magnet therefore, the same energy trajectory is bent more.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Permanent magnets for ELM suppression in tokamaks: feasibility and operational compatibility

Permanent magnets can provide static magnetic fields without power supplies or feed lines, offering a simpler alternative to conventional electromagnets in tokamaks. This work examines permanent magnet arrays (PMAs) for edge localized mode (ELM) control in double-null (DN) configurations, where traditional RMP coils exhibit limited effectiveness. Linear plasma response calculations using IPEC assess high-field-side (HFS) permanent magnet placement, benchmarking performance against DIII-D low-field-side (LFS) internal coils (I-coils) while evaluating engineering constraints. Modeling results demonstrate that HFS permanent magnet configurations generate HFS plasma response amplitudes more than 5 times larger than conventional I-coil systems. While other resonant response metrics show comparable or reduced response relative to I-coils, the combination of conventional RMP systems and permanent magnets is expected to provide enhanced performance. Operational impact assessments of persistent magnetic fields, including sideband field effects and startup/ramp-up compatibility, reveal acceptable performance within established operational boundaries. This analysis establishes PMAs as a technically viable approach for DN ELM control with reductions in system complexity, motivating further experimental validation on existing tokamak facilities.

3D magnetic perturbation↗
DOE OSTI2023

A Review of Axial Flux Permanent Magnet Machine Technology

Axial flux permanent magnet machines (AFPM) are popular for applications that benefit from high torque density and an axially compact form factor, such as in-wheel traction drives. Although the radial flux permanent magnet machine (RFPM) and the AFPM work based on the same underlying principle, the differences in their geometry introduce complexities in analysis of the AFPM. In this paper, the different AFPM design variants, their sizing approaches, computationally efficient design optimization techniques, and manufacturing techniques reported in literature are reviewed. In addition to classical AFPM machines, emerging variants and research opportunities with potential to push the boundaries of electric machine technology are reviewed. Furthermore, these include bearingless AFPMs, magnetically geared AFPMs, and combined radial-axial flux machines.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Recent Advances in Analysis and Design of Axial Flux Permanent Magnet Electric Machines

Axial flux permanent magnet machines (AFPM) are popular for applications that benefit from high torque density and an axially compact form factor, such as in-wheel traction drives. Although the radial flux permanent magnet machine (RFPM) and the AFPM work based on the same underlying principle, the differences in their geometry introduce complexities in analysis of the AFPM. In this paper, the different AFPM design variants, their sizing approaches, computationally efficient design optimization techniques, and manufacturing techniques reported in literature are reviewed. In addition to classical AFPM machines, emerging variants and research opportunities with potential to push the boundaries of electric machine technology are reviewed. These include bearingless AFPMs, magnetically geared AFPMs, and combined radial-axial flux machines.

Nishanth, FNU↗
DOE OSTI2025

High-performance permanent-magnet materials based on CeFe 12

We perform first-principles calculations on the Mo/Zr-alloyed ThMn 12 -structure prototype CeFe 12 to explore its electronic and magnetic properties and potential for permanent magnet applications. A recent experiment has shown that the Mo/Zr-alloyed CeFe 12 phase with the symmetry 𝐼⁢4/𝑚⁢𝑚⁢𝑚 can be stabilized in bulk. It encourages an investigation into the intrinsic magnetic characteristics of the base structure CeFe 12 and the effect of transition metal alloying in it. Our calculations reveal that the base structure prototype CeFe 12 in its tetragonal phase exhibits uniaxial magnetic anisotropy with a magnetic anisotropy energy (𝐾 1 ) ∼ 1 MJ/m −3 and a substantial magnetic moment of ∼ 1.8T, showing its promise as a permanent magnet. The introduction of the stabilizing transition metals Zr, Mo, and W reduces these values but still keeps the materials very promising. Notably, when 50% of Ce is substituted by Sm in Mo-alloyed CeFe 12 , the 𝐾 1 is significantly enhanced, accompanied by a fairly decent magnetic moment of ∼ 1.2T. These findings establish this alloy as a strong candidate for high-performance permanent magnet applications. In conclusion, this study emphasizes the importance of strategic element substitution and site selection in transition metal-alloyed CeFe 12 to achieve both structural stability and remarkable magnetic properties.

Density of states↗
NASA NTRS1988

Self-Centering Reciprocating-Permanent-Magnet Machine

New design for monocoil reciprocating-permanent-magnet electric machine provides self-centering force. Linear permanent-magnet electrical motor includes outer stator, inner stator, and permanent-magnet plunger oscillateing axially between extreme left and right positions. Magnets arranged to produce centering force and allows use of only one coil of arbitrary axial length. Axial length of coil chosen to provide required efficiency and power output.

Bhate, Suresh↗
DOE OSTI2022

Critical-Element-Free Permanent-Magnet Materials Based on Ce 2 Fe 14 B

Developing a critical-element-free low-cost permanent magnet is an urgent necessity in view of rapidly developing technologies and the associated huge market demand for Nd 2 Fe 14 B-based magnets. Here, inspired by the abundant and low-cost nature of Ce and these high-performance Nd 2 Fe 14 B permanent magnets, we explore whether it is in fact possible to attain a useful performance in alloys based on the sister material Ce 2 Fe 14 B, employing both experimental and theoretical efforts. Experimentally, we study Ce 2 Fe 14 B with Co, La, and Zr substitutions. The Zr substitution is explored in view of Zr’s frequent role in enhancing magnetic anisotropy in permanent magnets, while the Co and La substitutions serve to remedy the too-low Curie point of 433 K in the base alloy. While we find no Zr-related anisotropy enhancement either experimentally or theoretically, the cosubstitution of La and Co indeed improves the Curie temperature as well as the magnetization, M s , with a potential energy product as high as 38 MG Oe. These properties together suggest optimization of the alloy LaCeFe 12.7 Co 1.3 B (with only 7 wt % cobalt) as a critical-element-free permanent magnet. While the substituted elements do not enhance magnetic anisotropy, from theory, we find a substantial increase, to a first anisotropy constant, K1, as high as 4.24 MJ/m 3 , associated with Bi substitution for Ce. In this paper, our experimental and theoretical results demonstrate the great potential of La, Co, and Bi substitutions in developing low-cost and critical-element-free Ce 2 Fe 14 B-based permanent magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis and properties of bulk cobalt-carbide permanent magnets

Nanocrystalline bulk Co-C permanent magnets were produced by rapid hot consolidation of ball milled powder precursors. Bulk magnets with an average grain size of 20 nm and densities up to 94 percent of the theoretical density were successfully processed at pressures exceeding 1 GPa for the first time. Their microstructural and magnetic properties along with their magnetocrystalline anisotropy values are reported. Presence of iron contamination that results from the use steel milling media in milling was confirmed by elemental mapping of the bulk magnets. It is concluded that iron bonds in the form of hematite and does not adversely affect coercivity values. Here, this study shows that the Co 3 C compound does possess a sizable magnetocrystalline anisotropy, making it a suitable candidate as a rare earth free permanent magnet.

Co3 C↗
DOE OSTI2020

Topology optimization of permanent magnets for stellarators

In this work, we introduce a topology optimization method to design permanent magnets for advanced stellarators. Recent researches show that permanent magnets have great potentials to simplify stellarator coils. We adopt state-of-the-art numerical techniques to determine the presence of magnets in the entire designing space. The FAMUS code is developed and it can design engineering-feasible permanent magnets for general stellarators satisfying the constraints of the maximum material magnetization and explicit forbidden regions. FAMUS has been successfully verified against the previously proposed linear method. Three different permanent magnet designs together with planar TF coils for a half-Tesla NCSX configuration have been obtained for demonstrations. The designs have good accuracy in generating the desired equilibrium and offer considerably large plasma access on the outboard side. The results show that FAMUS is a flexible, advanced numerical tool for future permanent magnet stellarator designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Accurate machine-learning predictions of coercivity in high-performance permanent magnets

Increased demand for high-performance permanent magnets in the electric vehicle and wind-turbine industries has prompted the search for cost-effective alternatives. Discovering magnetic materials with the desired intrinsic and extrinsic permanent magnet properties presents a significant challenge to researchers because of issues with the global supply of rare-earth elements, material stability, and a low maximum magnetic energy product BH max . While first-principles density functional theory (DFT) predicts materials’ magnetic moments, magnetocrystalline anisotropy constants, and exchange interactions, it cannot compute extrinsic properties such as coercivity (H c ). Although it is possible to calculate H c theoretically with micromagnetic simulations, the predicted value is larger than the experiment by almost an order of magnitude due to the Brown paradox. To circumvent these issues, we employ machine-learning (ML) methods on an extensive database obtained from experiments, DFT calculations, and micromagnetic modeling. The use of a large experimental dataset enables realistic H c predictions for materials such as Ce-doped Nd 2 ⁢Fe 14 ⁢B, comparing favorably against micromagnetically simulated coercivities. Remarkably, our ML model accurately identifies uniaxial magneto-crystalline anisotropy as the primary contributor to H c . With DFT calculations, we predict the Nd-site-dependent magnetic anisotropy behavior in Nd 2 ⁢Fe 14 ⁢B, confirming that Nd 4⁢g sites mainly contribute to uniaxial magnetocrystalline anisotropy, and also calculate the Curie temperature (T c ). Finally, both calculated results are in good agreement with the experiments. The coupled experimental dataset and ML modeling with DFT input predict H c with far greater accuracy and speed than was previously possible using micromagnetic modeling. Further, we reverse engineer the grain-boundary and intergrain exchange coupling with micromagnetic simulations by employing the ML predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1991

Makeup and uses of a basic magnet laboratory for characterizing high-temperature permanent magnets

A set of instrumentation for making basic magnetic measurements was assembled in order to characterize high intrinsic coercivity, rare earth permanent magnets with respect to short term demagnetization resistance and long term aging at temperatures up to 300 C. The major specialized components of this set consist of a 13 T peak field, capacitor discharge pulse magnetizer; a 10 in. pole size, variable gap electromagnet; a temperature controlled oven equipped with iron cobalt pole piece extensions and a removable paddle that carries the magnetization and field sensing coils; associated electronic integrators; and sensor standards for field intensity H and magnetic moment M calibration. A 1 cm cubic magnet sample, carried by the paddle, fits snugly between the pole piece extensions within the electrically heated aluminum oven, where fields up to 3.2 T can be applied by the electromagnet at temperatures up to 300 C. A sample set of demagnetization data for the high energy Sm2Co17 type of magnet is given for temperatures up to 300 C. These data are reduced to the temperature dependence of the M-H knee field and of the field for a given magnetic induction swing, and they are interpreted to show the limits of safe operation.

Niedra, Janis M.↗
DOE OSTI2020

Designing stellarators using perpendicular permanent magnets

We have developed a fast method to design perpendicular permanent magnets for simplifying stellarator coils based on existing codes. Coil complexity is one of the main challenges for stellarators. To date, only electromagnetic coils have been used to generate 3D fields for stellarators. Permanent magnets provide an alternative way to produce the desired magnetic field for optimized stellarators. In this paper, we revisit the concept of representing surface current using magnetic dipoles and carry out numerical validations. A surface magnetization is proven to be equivalent to the surface current that can be linearly solved by existing coil design codes. An incremental multi-layer method has been developed to obtain a practical solution that is attainable with present permanent magnets. With this method, we can reproduce a half-Tesla NCSX configuration using specially designed neodymium magnets together with simple planar coils. It shows that stellarator coils could be substantially simplified by adopting permanent magnets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Manufacturing Processes for Permanent Magnets: Part I—Sintering and Casting

Abstract Permanent magnets (PMs) produce magnetic fields and maintain the field even in the presence of an opposing magnetic field. Electrical machines using permanent magnets are more efficient than those without. Currently, all known strong magnets contain rare earth (RE) elements, and they are core components of a wide range of applications including electric vehicles and wind turbines. RE elements such as Nd and Dy have become critical materials due to the growing demand and constrained supply. Improving the manufacturing process is effective in mitigating the RE criticality issue by reducing waste and improving parts consistency. In this article, the state of the industry for PM is reviewed in detail considering both the technical and economic drivers. The importance of RE elements is discussed along with their economic importance to green energy. The conventional sintering and casting manufacturing processes for commercial magnets, including Nd-Fe-B, Sm-Co, Alnico, and ferrite, are described in detail.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A hard permanent magnet through molecular design

Permanent magnets constructed from metal ions and organic linkers using molecular design principles could bring transformative advances in areas such as energy conversion, transportation, and information storage. This comment highlights the recent discovery of a metal-organic magnet ordering at 242 °C, and discusses future research directions and possible applications involving such materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Permanent magnet alloys for gap magnets

Provided are Ce/Co/Cu permanent magnet alloys containing certain refractory metals, such as Ta and/or Hf, and optionally Fe which represent economically more favorable alternative to Sm-based magnets with respect to both material and processing costs and which retain and/or improve magnetic characteristics useful for GAP MAGNET applications.

Palasyuk, Andriy↗
NASA NTRS1991

Permanent magnet flux-biased magnetic actuator with flux feedback

The invention is a permanent magnet flux-biased magnetic actuator with flux feedback for adjustably suspending an element on a single axis. The magnetic actuator includes a pair of opposing electromagnets and provides bi-directional forces along the single axis to the suspended element. Permanent magnets in flux feedback loops from the opposing electromagnets establish a reference permanent magnet flux-bias to linearize the force characteristics of the electromagnets to extend the linear range of the actuator without the need for continuous bias currents in the electromagnets.

Groom, Nelson J.↗