Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pb(SN)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Quantum oscillation studies of the nodal line semimetal Ni 3 In 2 S 2-x Se x

Ternary shandite compounds with the general formula T 3 M 2 X 2 (T = Ni, Co, Rh or Pd; M = Sn, In, or Pb; and X = S or Se) have emerged as a large pool of topological semimetals. This family of compounds hosts different topological phases for various combinations of T, M and X. This paper reports the observation of quantum oscillations under the high magnetic fields in Ni 3 In 2 S 2-x Se x single crystals. Angular dependence of oscillation frequency suggests an evolution of the Fermi surface from three-dimensional to two-dimensional on Se substitution for S in Ni 3 In 2 S 2 . Here, the effective mass obtained for each composition by fitting the oscillation amplitude with the Lifshitz-Kosevich formula, shows no significant change, suggesting that the topological phase might be relatively robust against enhanced spin-orbit coupling upon Se doping in Ni 3 In 2 S 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exploration, Prediction, and Experimental Verification of Structure and Optoelectronic Properties in I 2 -Eu-IV-X 4 (I = Li, Cu, Ag; IV = Si, Ge, Sn; X = S, Se) Chalcogenide Semiconductors

Recently, there has been extensive research into photovoltaic, thermoelectric, and nonlinear optical applications of chalcogenide semiconductors within the large set of defect-resistant I 2 -II-IV-X4 (I = Li, Cu, Ag; II = Ba, Sr, Eu, Pb; IV = Si, Ge, Sn; X = S, Se) compounds. Five Eu-including compounds have previously been reported within this family, but a comparative study of possible structures and electronic properties of all 18 Eu-based combinations is still absent. Herein, we use hybrid density functional theory to study rare-earth-including I 2 -II-IV-X 4 semiconductors with Eu on the II site, in order to further understand this family and test the geometric tolerance factor approach (reported in our previous work) as a tool for predicting potential stable structures. We investigate how the exchange mixing parameter of the HSE06 density functional, α, affects the energetic positions of electronic levels, especially of the localized f-electron orbitals near the band edges of the extended semiconductor structures, using literature photoemission and band gap data of EuS for comparison. Lowest-energy quaternary structure candidates, energy band structures, and densities of states are computationally predicted for all 18 materials. Based on its predicted photovoltaics-relevant band gap, the previously unknown compound Cu 2 EuSnSe 4 was selected and synthesized. Furthermore, the experimental structure, lattice parameters, and band gap of Cu 2 EuSnSe 4 are consistent with the computational predictions, confirming a 1.55 eV band gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Proton and neutron density distributions at supranormal density in low- and medium-energy heavy-ion collisions. II. Central Pb + Pb collisions

This paper represents a continuation of our investigation into the limitations on total, proton, and neutron particle number densities, as well as the asymmetry of proton and neutron density distributions achievable in central heavy-ion collisions. We explore these aspects at low and medium energies within the framework of the Boltzmann-Uhlenbeck-Uehling (pBUU) transport and time-dependent Hartree-Fock (TDHF) models. Previous studies, focusing on symmetric and asymmetric collisions of Ca and Sn nuclei [1], and initial results on Pb-nuclei collisions [2], emphasized the role of the Coulomb interaction in these events. Our findings indicated that: (i) the highest total densities predicted at 𝐸 beam = 800 MeV/nucleon were on the order of ≈ 2.5⁢𝜌 0 (𝜌 0 = 0.16 fm −3 ), (ii) the proton-neutron asymmetry for maximal densities, 𝛿=(𝜌$^{max}_{n}$− 𝜌$^{max}_{p}$)/(𝜌$^{max}_{n}$+𝜌$^{max}_{p}$), did not generally exceed the asymmetry in the initial state of the collision at all beam energies and tended to decrease during the reaction, and (iii) a significant portion of this asymmetry had its microscopic origin in Coulomb forces, masking the pure nuclear contribution. These new findings, particularly relevant in the astrophysical context, are further examined in this work, focusing on the heaviest target-projectile combination 212,208 Pb accessible in an experiment. We introduce the SkT3 Skyrme force model, not previously used for the Pb system, and compare it to the SV-bas and SV-sym34 models to explore the symmetry-energy dependence of the results. Contour plots of nucleonic densities are presented, contrasting the time evolution of the density distributions in low (TDHF) and high (pBUU) models. We also present the evolution of normalized maximal proton, neutron, and total nucleon number density with increasing beam energy in the full pBUU model and the Vlasov approximation, aiming to explore the impact of correlations in the reaction. The time evolution of the proton and neutron density distributions in the plane transverse to the beam direction is illustrated at both low and high beam energy. In conclusion, our detailed examination of the Pb system in this work provides further essential evidence that the aforementioned findings (i)–(iii) are only weakly dependent on system size and a symmetry-energy model, and thus, they are of more general importance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The underappreciated lone pair in halide perovskites underpins their unusual properties

The presence of 6s 2 (5s 2 ) lone-pair electrons on the B-site Pb (Sn) in all-inorganic and hybrid halide ABX 3 perovskites distinguishes these materials from the familiar tetrahedral semiconductors traditionally employed in optoelectronics and is key to many of their appealing properties. These electrons are stereochemically active, albeit often in a hidden fashion, resulting in unusual and highly anharmonic lattice dynamics that are linked to many of the special optoelectronic properties displayed by this material class. This article describes the connections between this atypical electronic configuration and the electronic structure and lattice dynamics of these compounds. We illustrate how the lone pair leads to favorable bandwidths and band alignments, mobile holes, large ionic dielectric response, large positive thermal expansion, and even possibly defect-tolerant electronic transport. Taken together, the evidence suggests that other high-performing semiconductors may be found among compounds with lone-pair-bearing cations in high symmetry environments and a high degree of connectivity between atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carbazole-Based Hole Transport Polymer for Methylammonium-Free Tin-Lead Perovskite Solar Cells with Enhanced Efficiency and Stability

As the most commonly used hole transport material (HTM) in tin-lead (Sn-Pb) perovskite solar cells (PSCs), poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) limits the power conversion efficiency (PCE) and stability of the PSCs due to its acidic characteristics. Herein, an easily synthesized polymer HTM poly[(phenyl)imino[9-(2-ethylhexyl)carbazole]-2,7-diyl] (CzAn) with a shallow highest occupied molecular orbital (HOMO) level of -4.95 eV is used in a p-i-n structure, methylammonium-free, Sn-Pb PSC to replace PEDOT:PSS. Upon optimization using doping and surface engineering, high quality Sn-Pb PSCs could be successfully fabricated, boosting the PCE to 22.6% (stabilized PCE of 21.3%) compared with 21.2% for PEDOT:PSS. The perovskite films prepared on the modified CzAn HTM possess improved crystallinity, reduced trap-state density, and larger carrier mobility resulting in PSCs with greatly improved stability.

carrier mobility↗
DOE OSTI2020

Materials Data on SnTe(PbS)4 by Materials Project

SnTe(PbS)4 is Molybdenum Carbide MAX Phase-derived structured and crystallizes in the trigonal R3m space group. The structure is three-dimensional. there are four inequivalent Pb2+ sites. In the first Pb2+ site, Pb2+ is bonded to three equivalent Te2- and three equivalent S2- atoms to form PbTe3S3 octahedra that share corners with three equivalent PbS6 octahedra, corners with three equivalent SnTe3S3 octahedra, edges with three equivalent SnTe3S3 octahedra, and edges with nine PbTe3S3 octahedra. The corner-sharing octahedra tilt angles range from 1–2°. All Pb–Te bond lengths are 3.22 Å. All Pb–S bond lengths are 2.99 Å. In the second Pb2+ site, Pb2+ is bonded to six S2- atoms to form a mixture of edge and corner-sharing PbS6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. There are three shorter (3.01 Å) and three longer (3.02 Å) Pb–S bond lengths. In the third Pb2+ site, Pb2+ is bonded to six S2- atoms to form a mixture of edge and corner-sharing PbS6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. There are three shorter (3.02 Å) and three longer (3.04 Å) Pb–S bond lengths. In the fourth Pb2+ site, Pb2+ is bonded to six S2- atoms to form PbS6 octahedra that share corners with three equivalent PbS6 octahedra, corners with three equivalent SnTe3S3 octahedra, edges with three equivalent SnTe3S3 octahedra, and edges with nine PbS6 octahedra. The corner-sharing octahedra tilt angles range from 1–4°. There are three shorter (3.00 Å) and three longer (3.06 Å) Pb–S bond lengths. Sn2+ is bonded to three equivalent Te2- and three equivalent S2- atoms to form SnTe3S3 octahedra that share corners with six PbS6 octahedra, edges with six PbS6 octahedra, and edges with six equivalent SnTe3S3 octahedra. The corner-sharing octahedra tilt angles range from 2–4°. All Sn–Te bond lengths are 3.14 Å. All Sn–S bond lengths are 2.91 Å. Te2- is bonded to three equivalent Pb2+ and three equivalent Sn2+ atoms to form TeSn3Pb3 octahedra that share corners with six SPb6 octahedra, edges with six equivalent TeSn3Pb3 octahedra, and edges with six SPb6 octahedra. The corner-sharing octahedral tilt angles are 6°. There are four inequivalent S2- sites. In the first S2- site, S2- is bonded to six Pb2+ atoms to form SPb6 octahedra that share corners with three equivalent TeSn3Pb3 octahedra, corners with three equivalent SPb6 octahedra, edges with three equivalent TeSn3Pb3 octahedra, and edges with nine SPb6 octahedra. The corner-sharing octahedra tilt angles range from 0–6°. In the second S2- site, S2- is bonded to six Pb2+ atoms to form a mixture of edge and corner-sharing SPb6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. In the third S2- site, S2- is bonded to six Pb2+ atoms to form a mixture of edge and corner-sharing SPb6 octahedra. The corner-sharing octahedra tilt angles range from 1–2°. In the fourth S2- site, S2- is bonded to three equivalent Pb2+ and three equivalent Sn2+ atoms to form SSn3Pb3 octahedra that share corners with three equivalent TeSn3Pb3 octahedra, corners with three equivalent SPb6 octahedra, edges with three equivalent TeSn3Pb3 octahedra, and edges with nine SPb6 octahedra. The corner-sharing octahedra tilt angles range from 2–6°.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carrier control in Sn–Pb perovskites via 2D cation engineering for all-perovskite tandem solar cells with improved efficiency and stability

All-perovskite tandem solar cells are promising for achieving photovoltaics with power conversion efficiencies above the detailed balance limit of single-junction cells, while retaining the low cost, light weight and other advantages associated with metal halide perovskite photovoltaics. However, the efficiency and stability of all-perovskite tandem cells are limited by the Sn-Pb-based narrow-bandgap perovskite cells. Here we show that the formation of quasi-two-dimensional (quasi-2D) structure (PEA) 2 GAPb 2 I 7 from additives based on mixed bulky organic cations phenethylammonium (PEA+) and guanidinium (GA+) provides critical defect control to substantially improve the structural and optoelectronic properties of the narrow-bandgap (1.25 eV) Sn-Pb perovskite thin films. Additionally, this 2D additive engineering results in Sn-Pb-based absorbers with low dark carrier density (~1.3 x 10 14 cm -3 ), long bulk carrier lifetime (~9.2 us) and low surface recombination velocity (~1.4 cm s -1 ), leading to 22.1%-efficient single-junction Sn-Pb perovskite cells and 25.5%-efficient all-perovskite two-terminal tandems with high photovoltage and long operational stability.

14 SOLAR ENERGY↗
DOE OSTI2023

Determination of a surrogate for plutonium electrorefining

Conducting research experiments on plutonium electrorefining is difficult due to the significant hazards and regulations associated with nuclear materials. Finding a surrogate for plutonium electrorefining studies would enable more fundamental research to be conducted. Potential surrogates were first identified by determining the physical properties required to conduct electrorefining at the same conditions commonly used in plutonium electrorefining, a molten metal and molten CaCl 2 at 1123 K. Ce-CeCl 3 , In-InCl 3 , and Pb-PbCl 2 were the only potential surrogates identified using these constraints. Sn-SnCl 2 was also tested at these same conditions. More potential surrogates were identified by changing the matrix salt and operating temperature. This expanded the potential surrogate list to also include Zn-ZnCl 2 , Sn-SnCl 2 , and Bi-BiCl 3 . Zn-ZnCl 2 was used with the LiCl-CaCl 2 (65:35 mol%) eutectic at 773 K. Sn-SnCl2 and Bi-BiCl 3 were used with the LiCl-KCl-CaCl 2 (50.5:44.2:5.3 mol%) eutectic at 673–773 K. Ce electrorefining in molten CaCl 2 resulted in a difficult to separate colloid mixture of Ce, Ca and Cl. Electrorefining rates for In in molten CaCl 2 were too slow due to InCl 3 volatilizing out of the molten salt. Only trace amounts of SnCl 2 was retained in the CaCl 2 at 1123 K resulting in impractical electrorefining rates. Zn metal product was successfully collected in the LiCl-CaCl 2 eutectic molten salt, but the metal obtained did not coalesce into one piece. Sn and Bi were successfully electrorefined in the LiCl-KCl-CaCl 2 eutectic molten salt and coalesced into product rings with high yields and coulombic efficiencies. Finally, while a surrogate could not be identified using the same conditions as plutonium electrorefining, two possible surrogates, Sn-SnCl 2 and Bi-BiCl 3 , were found that could imitate the physical configuration (i.e., molten salt on top of molten metal) of plutonium electrorefining at a reduced temperature using the eutectic LiCl-KCl-CaCl 2 salt at 673–773 K in place of CaCl 2 at 1123 K.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Decoding the Broadband Emission of 2D Pb-Sn Halide Perovskites through High-Throughput Exploration

Unlike single-component 2D metal halide perovskites (MHPs) exhibiting sharp excitonic photoluminescence (PL), a broadband PL emerges in mixed Pb-Sn 2D lattices. Two physical models –self-trapped exciton and defect-induced Stokes-shift – are proposed to explain this unconventional phenomenon. However, the explanations provide limited rationalizations without consideration of the formidable compositional space, and thus, the fundamental origin of broadband PL remains elusive. Herein, the high-throughput automated experimental workflow is established to systematically explore the broadband PL in mixed Pb-Sn 2D MHPs, employing PEA (Phenethylammonium) as a model cation known to work as a rigid organic spacer. Spectrally, the broadband PL becomes further broadened with rapid PEA 2 PbI 4 phase segregation with increasing Pb concentrations during early-stage crystallization. Counterintuitively, MHPs with high Pb concentrations exhibit prolonged PL lifetimes. Hyperspectral microscopy identifies substantial PEA 2 PbI 4 phase segregation in those films, hypothesizing that the establishment of charge transfer excitons by the phase segregation upon crystallization at high-Pb compositions results in distinctive PL properties. In conclusion, these results indicate that two independent mechanisms—defect-induced Stoke-shifts and the establishment of charge transfer excitons by phase segregation—coexist which significantly correlates with the Pb:Sn ratio, thereby simultaneously contributing to the broadband PL emission in 2D mixed Pb-Sn HPs.

2D Pb-Sn halide perovskites↗
DOE OSTI2021

Machine learning-enabled prediction of chemical durability of A 2 B 2 O 7 pyrochlore and fluorite

Pyrochlore-structure type and its derivative in a general formula A 2 B 2 O 7 (A = rare earth elements and actinides; B = Ti, Sn, Zr, Hf, Pb, Si, etc.) display excellent structural flexibility and rich crystal chemistry as promising nuclear waste form materials capable of immobilizing actinides and fission products. It is essential to understand these materials’ chemical durability and element release of radionuclides in order to evaluate their performance in near-field environment. However, it is a formidable grand technological challenge to experimentally perform durability testing across hundreds of thousands of possibilities resulting from their extreme compositional complexities due to cation substitutions at both A and B-sites. In this work, we demonstrate a machine learning approach to determine the key materials parameters and structural characteristics governing the leaching behaviors from a small set of selected compositions as model systems, enabling a science-based prediction of their chemical durability that can be extended to a wide range of chemical compositions. The combination of four key structural characteristics and materials parameters, including ionic radius size difference , ionic potential difference , electronegativity difference , and lattice parameter , creates features an optimized prediction of the chemical durability. Two machine learning models, linear regression and Kernel ridge regression models, are trained on the randomly-split training dataset derived from the experimentally-determined elemental release rates, and subsequently tested on the testing dataset. The predicted leaching rates from both machine learning models show an excellent agreement with the experimental data, demonstrating the feasibility of rapidly evaluating the material properties of new compositions. These results highlight the immense potential of synergizing informatics through machine learning-based models and well-controlled experiments of selected model systems to accelerate materials design and discovery with optimized compositions and performance of promising materials for effective nuclear waste management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Substitution of Pb with (Li 1/2 Bi 1/2 ) in PbZrO 3 -based antiferroelectric ceramics

PbZrO 3 -based antiferroelectric (AFE) ceramics are promising dielectrics for high-energy-density capacitors due to their reversible phase transitions during charge–discharge cycles. In this work, a new composition series, [Pb 0.93–x La 0.02 (Li 1/2 Bi 1/2 ) x Sr 0.04 ][Zr 0.57 Sn 0.34 Ti 0.09 ]O 3 , with Li + and Bi 3+ substitution of Pb 2+ at x=0 , 0.04, 0.08, 0.12, 0.16 is investigated for the microstructure evolution, ferroelectric (FE) and dielectric properties. It is found that Li + and Bi 3+ substitution can significantly reduce the sintering temperature and simultaneously enhance the dielectric breakdown strength. An ultrahigh energy efficiency (94.0%) and a large energy density (3.22J/cm 3 ) are achieved in the composition of x = 0.12 with a low sintering temperature (1075°C).

36 MATERIALS SCIENCE↗
DOE OSTI2026

Cation Data for the East River Watershed, Colorado (2014-2025)

This data package contains mean values for cation concentration for water samples taken from the East River Watershed in Colorado. Inductively coupled plasma mass spectrometry (ICP-MS) has been used to measure the concentrations of elements of interest simultaneously for the East River Watershed, Colorado groundwater and surface water samples to inform insights on the biogeochemistry processes within the watershed. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. For samples collected prior to 06-16-2021, the instrumentation, Elan DRC II, PerkinElmer SCIEX, automatically switches among the three models necessary to analyze all 37 elements. These 37 elements include: (1) Lithium (Li), Beryllium (Be), Boron (B), Sodium (Na), Magnesium (Mg), Aluminium (Al), Silicon (Si), Phosphorus (P), Titanium (Ti), Cobalt (Co), Nickel (Ni), Copper (Cu), Zinc (Zn), Germanium (Ge), Arsenic (As), Rubidium (Rb), Strontium (Sr), Zirconium (Zr), Molybdenum (Mo), Silver (Ag), Cadmium (Cd), Tin (Sn), Antimony (Sb), Caesium (Cs), Barium (Ba), Europium (Eu), Lead (Pb), Thorium (Th), Uranium (U) using standard model, argon Ar as reaction gas, (2) Potassium (K), Calcium (Ca), Vanadium (V), Chromium (Cr), Manganese (Mn), Iron (Fe) using dynamic reaction cell (DRC) model, ammonia NH3 as reaction gas, and (3) Phosphorus (P) and Selenium (Se) using DRC model, oxygen O2 as reaction gas. Note for the samples with higher concentrations of chloride (Cl-), asenic (As) concentrations were analysed with DRC model (oxygen O2 as reaction gas) to avoid the interference of chloride. For samples collected on and after 06-16-2021, an advanced Agilent 8900 triple quadrupole inductively coupled plasma mass spectrometry system (Agilent 8900 QQQ ICP-MS, Agilent Technologies) has been used to measure the concentrations of interested 36 elements simultaneously for environmental samples, including (1) Lithium (Li), Beryllium (Be) and Boron (B) using standard no gas mode, (2) Sodium (Na), Magnesium (Mg), Aluminium (Al) Phosphorus (P), Potassium (K), Chromium (Cr), Manganese (Mn), Iron (Fe), Cobalt (Co), Nickel (Ni), Copper (Cu), Zinc (Zn), Germanium (Ge), Arsenic (As), Rubidium (Rb), Strontium (Sr), Zirconium (Zr), Molybdenum (Mo), Silver (Ag), Cadmium (Cd), Tin (Sn), Antimony (Sb), Cesium (Cs), Barium (Ba), Europium (Eu), Lead (Pb), Thorium (Th) and Uranium (U) using standard helium (He) collision mode, (3) Titanium (Ti) and Vanadium (V) using high Energy (HEHe) helium (He) collision mode, and (4) Silicon (Si), Calcium (Ca) and Selenium (Se) using standard H2 reaction mode. All samples were prepared/diluted with 2% (v/v) ultrapure nitric acid in Milli-Q water (18.2 mega ohm-cm), and analyzed under a rigorous quality assurance and quality control (QA/QC) process. This data package contains (1) a zip file (cation_data_2014_2025.zip) containing a total of 5,849 files: 5.848 data files of cation data from across the Lawrence Berkeley National Laboratory (LBNL) Watershed Function Scientific Focus Area (SFA) which is reported in .csv files per location and a locations.csv (1 file) with latitude and longitude for each location; (2) a file-level metadata (v6_20260901_flmd.csv) file that lists each file contained in the dataset with associated metadata; (3) a data dictionary (v6_20260901_dd.csv) file that contains terms/column_headers used throughout the files along with a definition, units, and data type; (4) PDF and docx files for the detemination of Method Detection Limits (MDLs) for ICP-MS PerkinElmer DRC II instrumentation (Detemination_of_Method_Detection_Limits__MDLs__for_ICP_MS__PerkinElmer_Elan_DRC_II__LBL_Bldg74_Lab214D) for samples before November 2021; (5) PDF and docx files for the determination of MDLs for ICP-MS Agilent 8900 QQQ instrumentation (ICP_MS_Analysis_detection_limits_and_QA_QC_WenmingDong_updated_2026-08-06) for samples November 2021 and onward. Missing values within the anion data files are noted as either "-9999" or "0.0" for not detectable (N.D.) data. There are a total of 113 locations containing cation data. Update on 2021-04-11: Added Detemination of Method Detection Limits (MDLs) for ICP-MS document, which can be accessed as a PDF or with Microsoft Word. Update on 2022-06-10: versioned updates to this dataset was made along with these changes: (1) updated cation data for all locations up to 2021-12-31, (2) removal of units from column headers in datafiles, (3) added row underneath headers to contain units of variables, (4) removed suffix and prefix on two variables (“aqberylliumion_asberyllium” and “aqlithiumion_aslithium”), (5) added -9999 for empty numerical cells, and (6) the addition of the file-level metadata (flmd.csv) and data dictionary (dd.csv) were added to comply with the File-Level Metadata Reporting Format. Update on 2022-09-09: Updates were made to reporting format specific files (file-level metadata and data dictionary) to correct swapped file names, add additional details on metadata descriptions on both files, add a header_row column to enable parsing, and add version number and date to file names (v2_20220909_flmd.csv and v2_20220909_dd.csv). Update on 2023-08-08: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-01-05. The file level metadata and data dictionary files were updated to reflect the additional data added. Update on 2024-03-11: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-10-16. Further, revisions to the data files were made to remove incorrect data points (from 1970 and 2001). The reporting format specific files were updated to reflect the additional data added. Updated versions of the PDF and docx files for determination of MDLs for ICP-MS data were added to this dataset for samples starting in November 2021. Update on 2025-05-15: Updates were made to both the data files and reporting format specific files. New available cation data was added, up until the end of WY2024 (September 30, 2024). International Generic Sample Numbers (IGSNs), when registered, were added to the data files. The reporting format specific files were updated to reflect the additional data added. Update on 2026-09-01: Updates were made to both the data files and reporting format specific files. New available cation data was added, up until the end of WY2025 (September 30, 2025). Updated versions, as of 2026-08-06, of the PDF and docx files for determination of MDLs for ICP-MS data were added to this dataset for samples starting in November 2021.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Deciphering the Distribution and Crystal-Chemical Environment of Arsenic, Lead, Silica, Phosphorus, Tin, and Zinc in a Porous Ferrihydrite Grain Using Transmission Electron Microscopy and Atom Probe Tomography

Here the interaction of contaminants and nutrients with soil constituents is controlled by processes in intergranular and intragranular pore spaces of organic matter or/and common secondary minerals such as ferrihydrite, ~Fe 3+ 10 O 14 (OH) 2 . This contribution shows that distribution and clustering of the contaminants As, P, Pb, Si, Sn, and Zn in a porous ferrihydrite grain is greatly affected by the heterogeneous size distribution and chemical composition of the pores as well as the ability of their polyhedra to polymerize with the same type of polyhedron. Transmission electron microscopy (TEM) and atom probe tomography (APT) studies are conducted on focused ion beam (FIB) sections extracted from a porous ferrihydrite grain from the smelter-impacted topsoil in Sudbury, Ontario, Canada. The ferrihydrite grain has pore spaces ranging in diameter from tens to hundreds of nanometers. TEM and scanning-TEM studies indicate that the surfaces of the pore walls are enriched in Si. APT data in conjunction with First Near Neighbor (1NN) analyses indicate different degrees of clustering of Pb, As, Sn, Zn, Si, and P within the sample and selected domains. Careful evaluations of 3D atomic plots and 1NN distances indicates the occurrence of polymerized arsenite-, silica-, Sn-, and Zn-polyhedra within pore spaces of the ferrihydrite. Deciphering adsorption, polymerization, and nucleation processes in porous Fe-(hydr)oxides and other soil constituents requires multianalytical approaches and, in this regard, we discuss the advantages and disadvantages of the combination of TEM and APT for characterizing complex environmental samples at the atomic to nanometer scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2003

Investigation of Dynamic Oxygen Adsorption in Molten Solder Jetting Technology

Surface tension forces play a critical role in fluid dynamic phenomena that are important in materials processing. The surface tension of liquid metals has been shown to be very susceptible to small amounts of adsorbed oxygen. Consequently, the kinetics of oxygen adsorption can influence the capillary breakup of liquid-metal jets targeted for use in electronics assembly applications, where low-melting-point metals (such as tin-containing solders) are utilized as an attachment material for mounting of electronic components to substrates. By interpreting values of surface tension measured at various surface ages, adsorption and diffusion rates of oxygen on the surface of the melt can be estimated. This research program investigates the adsorption kinetics of oxygen on the surface of an atomizing molten-metal jet. A novel oscillating capillary jet method has been developed for the measurement of dynamic surface tension of liquids, and in particular, metal melts which are susceptible to rapid surface degradation caused by oxygen adsorption. The experimental technique captures the evolution of jet swells and necks continuously along the jet propagation axis and is used in conjunction with an existing linear, axisymmetric, constant-property model to determine the variation of the instability growth rate, and, in turn, surface tension of the liquid as a function of surface age measured from the exit orifice. The conditions investigated so far focus on a time window of 2-4ms from the jet orifice. The surface properties of the eutectic 63%Sn-37%Pb solder alloy have been investigated in terms of their variation due to O2 adsorption from a N2 atmosphere containing controlled amounts of oxygen (from 8 ppm to 1000 ppm). The method performed well for situations where the oxygen adsorption was low in that time window. The value of surface tension for the 63Sn-37Pb solder in pure nitrogen was found to be 0.49 N/m, in good agreement with previously published work. A characteristic time of O(1ms) or less was determined for the molten-metal surface to be saturated by oxygen at 1000 ppm concentration in N2.

Megaridis, Constantine M.↗
DOE OSTI2022

UO 2 -liquid metal suspension fuel concept for enhanced passive safety of LWRs: A heat pipe case study

This work proposes a novel fuel concept for use in light-water type reactors (LWRs): UO 2 particles suspended in a low-melting-point liquid metal (LM). This new fuel form offers lower energy density and higher thermal conductivity, thus enhancing the fuel’s thermal performance compared to sintered UO 2 pellets. Two candidate alloys for the LM are proposed based on previous studies into accident-tolerant fuels: Bi-Pb-Sn and Pb-Sn. Ten research questions are provided to guide future development of this fuel. A simple heat pipe model was constructed by coupling a reactor physics code to a heat transport code and other physics modules. Scoping calculations were performed on this model core as a preliminary investigation into five of the research questions. A fuel with 13 wt% UO 2 was shown to maintain a steady-state peak coolant channel wall temperature below 400 °C, and maintain criticality via self-regulating reactivity feedback. Shortcomings of the present model are discussed in this work, along with proposed future model improvements and fuel development. The appendix provides an example of a reactor concept that could be developed to utilize this fuel, but more modeling and experimental work are needed before a full reactor concept can be developed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1975

Preferential concentration of certain elements in smaller aerosols emitted from aircraft engines

Aerosols from aircraft engines were collected with an eight-stage cascade sampler for a period of 24 h. The aerosol samples from each stage were analyzed for their elemental composition using the proton-induced X-ray emission (PIXE) technique. Seventeen elements (Si, P, S, Cl, K, Ca, Ti, V, Fe, Ni, Cu, Zn, Br, Sr, Nb, Sn, and Pb) were positively identified and quantitated at each stage. Six elements (S, Ca, Fe, Zn, Sn, and Pb) showed a fractional concentration increase with decreasing aerosol size. Similar, but less well-defined, trends were also observed for V and Ni. Silicon and chlorine, on the other hand, showed an opposite trend. Neutron-activation analysis of bulk aerosol samples collected every 2 h over the same period showed a correlation between concentration of Si, Ca, V, Ti, Zn, Br, and Sn and the density of air traffic at the airport. Analysis of the aviation-fuel samples by PIXE indicates that major fractions of Pb, Sn, Br, Zn, Ni, Fe, V, Ca, and S observed in these aerosol studies come from the aircraft engine exhaust.

Jolly, R. K.↗
DOE OSTI2020

Materials Data on SnPbO3 by Materials Project

PbSnO3 is Orthorhombic Perovskite-like structured and crystallizes in the orthorhombic Pbam space group. The structure is three-dimensional. there are two inequivalent Pb2+ sites. In the first Pb2+ site, Pb2+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Pb–O bond distances ranging from 2.47–2.92 Å. In the second Pb2+ site, Pb2+ is bonded in a 9-coordinate geometry to nine O2- atoms. There are a spread of Pb–O bond distances ranging from 2.56–3.23 Å. Sn4+ is bonded to six O2- atoms to form corner-sharing SnO6 octahedra. The corner-sharing octahedra tilt angles range from 15–27°. There are a spread of Sn–O bond distances ranging from 2.08–2.14 Å. There are five inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Pb2+ and two equivalent Sn4+ atoms. In the second O2- site, O2- is bonded in a 4-coordinate geometry to two equivalent Pb2+ and two equivalent Sn4+ atoms. In the third O2- site, O2- is bonded in a 2-coordinate geometry to three Pb2+ and two equivalent Sn4+ atoms. In the fourth O2- site, O2- is bonded in a 2-coordinate geometry to two equivalent Pb2+ and two equivalent Sn4+ atoms. In the fifth O2- site, O2- is bonded in a 2-coordinate geometry to three equivalent Pb2+ and two equivalent Sn4+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural and physical properties of 99 complex bulk chalcogenides crystals using first-principles calculations

Chalcogenide semiconductors and glasses have many applications in the civil and military fields, especially in relation to their electronic, optical and mechanical properties for energy conversion and in enviormental materials. However, they are much less systemically studied and their fundamental physical properties for a large class chalcogenide semiconductors are rather scattered and incomplete. Here, we present a detailed study using well defined first-principles calculations on the electronic structure, interatomic bonding, optical, and mechanical properties for 99 bulk chalcogenides including thirteen of these crytals which have never been calculated. Due to their unique composition and structures, these 99 bulk chalcogenides are divided into two main groups. The first group contains 54 quaternary crystals with the structure composition (A2BCQ4) (A = Ag, Cu; B = Zn, Cd, Hg, Mg, Sr, Ba; C = Si, Ge, Sn; Q = S, Se, Te), while the second group contains scattered ternary and quaternary chalcogenide crystals with a more diverse composition (AxByCzQn) (A = Ag, Cu, Ba, Cs, Li, Tl, K, Lu, Sr; B = Zn, Cd, Hg, Al, Ga, In, P, As, La, Lu, Pb, Cu, Ag; C = Si, Ge, Sn, As, Sb, Bi, Zr, Hf, Ga, In; Q = S, Se, Te; x=1, 2, 3; y=0, 1, 2, 5; z=0, 1, 2 and n=3, 4, 5, 6, 9). Moreover, the total bond order density (TBOD) is used as a single quantum mechanical metric to characterize the internal cohesion of these crystals enabling us to correlate them with the calculated properties, especially their mechanical properties. This work provides a very large database for bulk chalcogenides crucial for the future theoretical and experimental studies, opening opportunities for study the properties and potential application of a wide variety of chalcogenides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗