Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parallel applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Statistical Fault Detection for Parallel Applications with AutomaDeD

Today's largest systems have over 100,000 cores, with million-core systems expected over the next few years. The large component count means that these systems fail frequently and often in very complex ways, making them difficult to use and maintain. While prior work on fault detection and diagnosis has focused on faults that significantly reduce system functionality, the wide variety of failure modes in modern systems makes them likely to fail in complex ways that impair system performance but are difficult to detect and diagnose. This paper presents AutomaDeD, a statistical tool that models the timing behavior of each application task and tracks its behavior to identify any abnormalities. If any are observed, AutomaDeD can immediately detect them and report to the system administrator the task where the problem began. This identification of the fault's initial manifestation can provide administrators with valuable insight into the fault's root causes, making it significantly easier and cheaper for them to understand and repair it. Our experimental evaluation shows that AutomaDeD detects a wide range of faults immediately after they occur 80% of the time, with a low false-positive rate. Further, it identifies weaknesses of the current approach that motivate future research.

99 GENERAL AND MISCELLANEOUS↗

Application Portable Parallel Library

Application Portable Parallel Library (APPL) computer program is subroutine-based message-passing software library intended to provide consistent interface to variety of multiprocessor computers on market today. Minimizes effort needed to move application program from one computer to another. User develops application program once and then easily moves application program from parallel computer on which created to another parallel computer. ("Parallel computer" also include heterogeneous collection of networked computers). Written in C language with one FORTRAN 77 subroutine for UNIX-based computers and callable from application programs written in C language or FORTRAN 77.

Cole, Gary L.↗

Parallel scripting for applications at the petascale and beyond.

Scripting accelerates and simplifies the composition of existing codes to form more powerful applications. Parallel scripting extends this technique to allow for the rapid development of highly parallel applications that can run efficiently on platforms ranging from multicore workstations to petascale supercomputers.

97 MATHEMATICS AND COMPUTING↗

By Hand or Not By-Hand: A Case Study of Alternative Approaches to Parallelize CFD Applications

While parallel processing promises to speed up applications by several orders of magnitude, the performance achieved still depends upon several factors, including the multiprocessor architecture, system software, data distribution and alignment, as well as the methods used for partitioning the application and mapping its components onto the architecture. The existence of the Gorden Bell Prize given out at Supercomputing every year suggests that while good performance can be attained for real applications on general purpose multiprocessors, the large investment in man-power and time still has to be repeated for each application-machine combination. As applications and machine architectures become more complex, the cost and time-delays for obtaining performance by hand will become prohibitive. Computer users today can turn to three possible avenues for help: parallel libraries, parallel languages and compilers, interactive parallelization tools. The success of these methodologies, in turn, depends on proper application of data dependency analysis, program structure recognition and transformation, performance prediction as well as exploitation of user supplied knowledge. NASA has been developing multidisciplinary applications on highly parallel architectures under the High Performance Computing and Communications Program. Over the past six years, the transition of underlying hardware and system software have forced the scientists to spend a large effort to migrate and recede their applications. Various attempts to exploit software tools to automate the parallelization process have not produced favorable results. In this paper, we report our most recent experience with CAPTOOL, a package developed at Greenwich University. We have chosen CAPTOOL for three reasons: 1. CAPTOOL accepts a FORTRAN 77 program as input. This suggests its potential applicability to a large collection of legacy codes currently in use. 2. CAPTOOL employs domain decomposition to obtain parallelism. Although the fact that not all kinds of parallelism are handled may seem unappealing, many NASA applications in computational aerosciences as well as earth and space sciences are amenable to domain decomposition. 3. CAPTOOL generates code for a large variety of environments employed across NASA centers: MPI/PVM on network of workstations to the IBS/SP2 and CRAY/T3D.

Yan, Jerry C.↗

Portable programming on parallel/networked computers using the Application Portable Parallel Library (APPL)

The Application Portable Parallel Library (APPL) is a subroutine-based library of communication primitives that is callable from applications written in FORTRAN or C. APPL provides a consistent programmer interface to a variety of distributed and shared-memory multiprocessor MIMD machines. The objective of APPL is to minimize the effort required to move parallel applications from one machine to another, or to a network of homogeneous machines. APPL encompasses many of the message-passing primitives that are currently available on commercial multiprocessor systems. This paper describes APPL (version 2.3.1) and its usage, reports the status of the APPL project, and indicates possible directions for the future. Several applications using APPL are discussed, as well as performance and overhead results.

Quealy, Angela↗

Parallel application-level behavioral attributes for performance and energy management of high-performance computing systems

Run time variability of parallel applications continues to present significant challenges to their performance and energy efficiency in high-performance computing (HPC) systems. When run times are extended and unpredictable, application developers perceive this as a degradation of system (or subsystem) performance. Extended run times directly contribute to proportionally higher energy consumption, potentially negating efforts by applications, or the HPC system, to optimize energy consumption using low-level control techniques, such as dynamic voltage and frequency scaling (DVFS). Therefore, successful systemic management of application run time performance can result in less wasted energy, or even energy savings. We have been studying run time variability in terms of communication time, from the perspective of the application, focusing on the interconnection network. More recently, our focus has shifted to developing a more complete understanding of the effects of HPC subsystem interactions on parallel applications. In this context, the set of executing applications on the HPC system is treated as a subsystem, along with more traditional subsystems like the communication subsystem, storage subsystem, etc. To gain insight into the run time variability problem, our earlier work developed a framework to emulate parallel applications (PACE) that stresses the communication subsystem. Evaluation of run time sensitivity to network performance of real applications is performed with a tool called PARSE, which uses PACE. In this paper, we propose a model defining application-level behavioral attributes, that collectively describes how applications behave in terms of their run time performance, as functions of their process distribution on the system (spacial locality), and subsystem interactions (communication subsystem degradation). These subsystem interactions are produced when multiple applications execute concurrently on the same HPC system. We also revisit our evaluation framework and tools to demonstrate the flexibility of our application characterization techniques, and the ease with which attributes can be quantified. The validity of the model is demonstrated using our tools with several parallel benchmarks and application fragments. Results suggest that it is possible to articulate application-level behavioral attributes as a tuple of numeric values that describe course-grained performance behavior.

Computer Science↗

Algorithms for Balanced Graph Colorings with Applications in Parallel Computing

Graph coloring is used to identify subsets of independent tasks in parallel scientific computing applications. Traditional coloring heuristics aim to reduce the number of colors used as that number also corresponds to the number of parallel steps in the application. However, if the color classes produced have a skew in their sizes, utilization of hardware resources becomes inefficient, especially for the smaller color classes. Equitable coloring is a theoretical formulation of coloring that guarantees a perfect balance among color classes, and its practical relaxation is referred to as balanced coloring. In this paper, we revisit the problem of balanced coloring in the context of parallel computing. The goal is to achieve a balanced coloring of an input graph without increasing the number of colors that an algorithm oblivious to balance would have used. We propose and study multiple heuristics that aim to achieve such a balanced coloring for two variants of coloring problem, distance-1 coloring and partial distance-2 coloring (defined on a bipartite graph). We present parallelization approaches for multi-core and manycore architectures, and cross-evaluate their effectiveness with respect to the quality of balance achieved and performance. Furthermore, we study the impact of the proposed balanced coloring heuristics on a concrete application - viz. parallel community detection, which is an example of an irregular application. In addition, we propose several extensions to our balancing schemes and evaluate their balancing efficacy and performance characteristics. The thorough treatment of balanced coloring presented in this paper from algorithms to application is expected to serve as a valuable resource to parallel application developers who seek to improve parallel performance of their applications using coloring.

graph coloring, multithreaded algorithms↗

Graphics applications utilizing parallel processing

The results are presented of research conducted to develop a parallel graphic application algorithm to depict the numerical solution of the 1-D wave equation, the vibrating string. The research was conducted on a Flexible Flex/32 multiprocessor and a Sequent Balance 21000 multiprocessor. The wave equation is implemented using the finite difference method. The synchronization issues that arose from the parallel implementation and the strategies used to alleviate the effects of the synchronization overhead are discussed.

Rice, John R.↗

Instability Issue of Paralleled Dies in an SiC Power Module in Solid-State Circuit Breaker Applications

Paralleled dies in a power module could have instability issues during high current switching transients. Here, the instability is caused by the differential-mode oscillation among paralleled MOSFETs. Conventional analyses of paralleled MOSFETs’ stability are normally limited to a single operating point, which ignores the influences of the switching trajectory and nonlinear device parameters on stability. This article reveals that the switching trajectory can significantly influence parallel stability. The analysis is improved by solving eigenvalues of state-space modeling system matrices of all operating points that the switching trajectory goes through considering nonlinear device parameters. Higher voltage and current stresses result in greater real parts of complex eigenvalues, which explains why the paralleled MOSFETs are more unstable with higher voltage and current stresses. To improve stability in solid-state circuit breaker applications, we propose a method to manipulate the switching trajectory to avoid the unstable region where the conventional hard switching trajectory normally goes through. Experimental results show that the turn- off current capability can be increased from ~five times of rated current with the gate oscillation using the conventional turn- off trajectory to ~ten times of rated current without the gate oscillation using the optimal turn- off trajectory.

42 ENGINEERING↗

Balanced Coloring for Parallel Computing Applications

Graph coloring is used to identify subsets of independent tasks in parallel scientific computing applications. Traditional coloring heuristics aim to reduce the number of colors used as that number also corresponds to the number of parallel steps in the application. However, if the color classes produced have a skew in their sizes, utilization of hardware resources becomes inefficient, especially for the smaller color classes. Equitable coloring is a theoretical formulation of coloring that guarantees a perfect balance among color classes, and its practical relaxation is referred to as balanced coloring. In this paper, we revisit the problem of balanced coloring in the context of parallel computing. The goal is to achieve a balanced coloring of an input graph without increasing the number of colors that an algorithm oblivious to balance would have used. We propose and study multiple heuristics that aim to achieve such a balanced coloring, present parallelization approaches for multi-core and manycore architectures, and cross-evaluate their effectiveness with respect to the quality of balance achieved and performance. Furthermore, we study the impact of the proposed balanced coloring heuristics on a concrete application - viz. parallel community detection, which is an example of an irregular application. The thorough treatment of balanced coloring presented in this paper from algorithms to application is expected to serve as a valuable resource to parallel application developers who seek to improve parallel performance of their applications using coloring.

Balanced coloring, Tilera manycore architecture, c↗

Data communications in a parallel active messaging interface of a parallel computer

Data communications in a parallel active messaging interface (`PAMI`) of a parallel computer composed of compute nodes that execute a parallel application, each compute node including application processors that execute the parallel application and at least one management processor dedicated to gathering information regarding data communications. The PAMI is composed of data communications endpoints, each endpoint composed of a specification of data communications parameters for a thread of execution on a compute node, including specifications of a client, a context, and a task, the compute nodes and the endpoints coupled for data communications through the PAMI and through data communications resources. Embodiments function by gathering call site statistics describing data communications resulting from execution of data communications instructions and identifying in dependence upon the call cite statistics a data communications algorithm for use in executing a data communications instruction at a call site in the parallel application.

97 MATHEMATICS AND COMPUTING↗

A Global View Programming Abstraction for Transitioning MPI Codes to PGAS Languages

The multicore generation of scientific high performance computing has provided a platform for the realization of Exascale computing, and has also underscored the need for new paradigms in coding parallel applications. The current standard for writing parallel applications requires programmers to use languages designed for sequential execution. These languages have abstractions that only allow programmers to operate on the process centric local view of data. To provide suitable languages for parallel execution, many research efforts have designed languages based on the Partitioned Global Address Space (PGAS) programming model. Chapel is one of the more recent languages to be developed using this model. Chapel supports multithreaded execution with high-level abstractions for parallelism. With Chapel in mind, we have developed a set of directives that serve as intermediate expressions for transitioning scientific applications from languages designed for sequential execution to PGAS languages like Chapel that are being developed with parallelism in mind.

Global Domain↗

Genetic algorithm based task reordering to improve the performance of batch scheduled massively parallel scientific applications

The growth in size of networked high performance computers along with novel accelerator-based node architectures has further emphasized the importance of communication efficiency in high performance computing. The world's largest high performance computers are usually operated as shared user facilities due to the costs of acquisition and operation. Applications are scheduled for execution in a shared environment and are placed on nodes that are not necessarily contiguous on the interconnect. Furthermore, the placement of tasks on the nodes allocated by the scheduler is sub-optimal, leading to performance loss and variability. Here, we investigate the impact of task placement on the performance of two massively parallel application codes on the Titan supercomputer, a turbulent combustion flow solver (S3D) and a molecular dynamics code (LAMMPS). Benchmark studies show a significant deviation from ideal weak scaling and variability in performance. The inter-task communication distance was determined to be one of the significant contributors to the performance degradation and variability. A genetic algorithm-based parallel optimization technique was used to optimize the task ordering. This technique provides an improved placement of the tasks on the nodes, taking into account the application's communication topology and the system interconnect topology. As a result, application benchmarks after task reordering through genetic algorithm show a significant improvement in performance and reduction in variability, therefore enabling the applications to achieve better time to solution and scalability on Titan during production.

97 MATHEMATICS AND COMPUTING↗

Parallel processing and expert systems

Whether it be monitoring the thermal subsystem of Space Station Freedom, or controlling the navigation of the autonomous rover on Mars, NASA missions in the 90's cannot enjoy an increased level of autonomy without the efficient use of expert systems. Merely increasing the computational speed of uniprocessors may not be able to guarantee that real time demands are met for large expert systems. Speed-up via parallel processing must be pursued alongside the optimization of sequential implementations. Prototypes of parallel expert systems have been built at universities and industrial labs in the U.S. and Japan. The state-of-the-art research in progress related to parallel execution of expert systems was surveyed. The survey is divided into three major sections: (1) multiprocessors for parallel expert systems; (2) parallel languages for symbolic computations; and (3) measurements of parallelism of expert system. Results to date indicate that the parallelism achieved for these systems is small. In order to obtain greater speed-ups, data parallelism and application parallelism must be exploited.

Yan, Jerry C.↗

Applications of Parallel Computation in Micro-Mechanics and Finite Element Method

This project discusses the application of parallel computations related with respect to material analyses. Briefly speaking, we analyze some kind of material by elements computations. We call an element a cell here. A cell is divided into a number of subelements called subcells and all subcells in a cell have the identical structure. The detailed structure will be given later in this paper. It is obvious that the problem is "well-structured". SIMD machine would be a better choice. In this paper we try to look into the potentials of SIMD machine in dealing with finite element computation by developing appropriate algorithms on MasPar, a SIMD parallel machine. In section 2, the architecture of MasPar will be discussed. A brief review of the parallel programming language MPL also is given in that section. In section 3, some general parallel algorithms which might be useful to the project will be proposed. And, combining with the algorithms, some features of MPL will be discussed in more detail. In section 4, the computational structure of cell/subcell model will be given. The idea of designing the parallel algorithm for the model will be demonstrated. Finally in section 5, a summary will be given.

Tan, Hui-Qian↗