Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Palladium (II)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Cross‐Coupling between Hydrazine and Aryl Halides with Hydroxide Base at Low Loadings of Palladium by Rate‐Determining Deprotonation of Bound Hydrazine

Abstract Reported here is the Pd‐catalyzed C–N coupling of hydrazine with (hetero)aryl chlorides and bromides to form aryl hydrazines with catalyst loadings as low as 100 ppm of Pd and KOH as base. Mechanistic studies revealed two catalyst resting states: an arylpalladium(II) hydroxide and arylpalladium(II) chloride. These compounds are present in two interconnected catalytic cycles and react with hydrazine and base or hydrazine alone to give the product. The selectivity of the hydroxide complex with hydrazine to form aryl over diaryl hydrazine was lower than that of the chloride complex, as well as the catalytic reaction. In contrast, the selectivity of the chloride complex closely matched that of the catalytic reaction, indicating that the aryl hydrazine is derived from this complex. Kinetic studies showed that the coupling process occurs by rate‐limiting deprotonation of a hydrazine‐bound arylpalladium(II) chloride complex to give an arylpalladium(II) hydrazido complex.

Wang, Justin Y.↗
DOE OSTI2020

Cross‐Coupling between Hydrazine and Aryl Halides with Hydroxide Base at Low Loadings of Palladium by Rate‐Determining Deprotonation of Bound Hydrazine

Abstract Reported here is the Pd‐catalyzed C–N coupling of hydrazine with (hetero)aryl chlorides and bromides to form aryl hydrazines with catalyst loadings as low as 100 ppm of Pd and KOH as base. Mechanistic studies revealed two catalyst resting states: an arylpalladium(II) hydroxide and arylpalladium(II) chloride. These compounds are present in two interconnected catalytic cycles and react with hydrazine and base or hydrazine alone to give the product. The selectivity of the hydroxide complex with hydrazine to form aryl over diaryl hydrazine was lower than that of the chloride complex, as well as the catalytic reaction. In contrast, the selectivity of the chloride complex closely matched that of the catalytic reaction, indicating that the aryl hydrazine is derived from this complex. Kinetic studies showed that the coupling process occurs by rate‐limiting deprotonation of a hydrazine‐bound arylpalladium(II) chloride complex to give an arylpalladium(II) hydrazido complex.

Wang, Justin Y.↗
DOE OSTI2025

An investigation of the physical and chemical changes of Pd nanoparticles on carbon supports in response to the release of hydrogen from aqueous formate solutions

Palladium nanoparticles on carbon supports (Pd/C) are effective for catalyzing hydrogen release from aqueous formate solutions but typically suffer from a gradual decrease of activity. This study finds two primary factors influencing activity: (i) the number of available surface Pd sites, and (ii) metal-support interactions which depend on the nature of the C support. We propose that the Pd/C catalyst is structure insensitive and undergoes Ostwald ripening to yield an active ‘conditioned’ catalyst with dispersion plateauing between ca. 15–20 %. Contrary to earlier studies, in-situ XANES experiments show that PdO is not an active catalyst for formate dehydrogenation. Calcination of Pd/C before dehydrogenation increases the catalytic activity which suggests a beneficial, albeit temporary, modification of the metal support interaction. N-containing supports minimize nanoparticle growth and also increase activity through a metal-support interaction. In conclusion, these findings advance our understanding of catalyst evolution and stability in formate dehydrogenation systems.

Formate dehydrogenation↗
DOE OSTI2025

Promoting the oxidative coupling of methanol and dimethylamine using group 1 alkali metals on palladium-gold nanoparticles

PdAu/SiO 2 catalysts were synthesized by strong electrostatic adsorption (SEA) and characterized by TEM, DRIFTS, XRD, XAS, and O 2 -TPD. The use of group 1 alkali salt solutions to control pH during SEA syntheses led to uptake of alkali metals observed reductions in the densities of terminal silanol groups of the SiO 2 support. In the absence of alkali metals, PdAu/SiO 2 catalyzes oxidative C-N bond formation between methanol and dimethylamine (DMA), yielding dimethylformamide (DMF) with ∼95 % carbon selectivity (CO 2 ∼5 %) at temperatures below 413 K. When Na, K, and Cs were present on the catalyst, methyl formate (MF) and tetramethylurea (TMU) were observed as additional products (combined ∼30 % carbon selectivity) while only TMU was detected for the Li-promoted catalyst. Total coupling product rate increased for promoted samples in the order Li < Na < Cs < K, and the apparent kinetics over the Cs-promoted catalyst were distinct from those over the alkali-free catalyst as the apparent reaction order with respect to DMA decreased and the apparent activation energy increased. Finally, this work demonstrates the sensitivity of oxidative coupling reactions to alkali metal promoters and the opportunity to achieve alkali promotion of metal catalysts during SEA synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Insights into palladium poisoning of Cu/SSZ-13 selective catalytic reduction catalysts

Here, the impacts of Pd poisoning to the activity, selectivity, and hydrothermal stability of Cu/SSZ-13 selective catalytic reduction (SCR) catalysts are reported. Pd lowers DeNOx efficiency of Cu/SSZ-13 via two mechanisms: (1) displacing SCR active sites in the form of isolated Pd-ions, and (2) catalyzing non-selective NH 3 oxidation in the form of PdO. The first mechanism works by the diffusion of isolated Pd-ions into chabazite cages to displace ZCu II OH SCR active species, and it occurs on Cu/SSZ-13 catalysts with and without external surface CuO clusters in similar fashion. In contrast, the second mechanism works differently with and without external surface CuO clusters. For Cu/SSZ-13 catalyst without external CuO clusters (i.e., primarily isolated Cu-ions), PdO leads to significant decrease of DeNOx efficiency at reaction temperatures above ~400°C due to its non-selective NH 3 oxidation activity at high temperatures. However, this poisoning effect becomes much less impactful on Cu/SSZ-13 catalyst containing CuO clusters. This is due to the formation of CuO-PdO solid solution via interactions between CuO and PdO, which reduces non-selective NH 3 oxidation potential. Furthermore, this solid solution formation even mitigates adverse effects caused by hydrothermal aging. Hence, the poisoning effects of Pd are closely related to Cu speciation and spatial distribution of a Cu/SSZ-13 catalyst. Finally, this study suggests a strategy in eliminating Pd poisoning, that is, the introduction of an oxide phase that effectively traps PdO but does not adversely influence SCR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1977

Armalcolite stability as a function of pressure and oxygen fugacity

High-pressure experiments in a piston-cylinder apparatus with silver-palladium containers were conducted to study the stability of synthetic armalcolite, (Fe,Mg)Ti2O5, as a function of pressures up to 15 kbar at 1000, 1100, and 1200 C. Three armalcolite compositions were used, each with an initial Fe/(Fe + Mg) ratio of 0.5. Composition I contained no zirconium, whereas compositions II and III were prepared with 4% and 10% by weight ZrO2. Difference in stability due to the presence or absence of Zr in these synthetic armalcolites is discussed. 4 wt% ZrO2 appears to saturate armalcolite at 1200 C and 1 atm. Zirconium is found to reduce armalcolite stability, but this effect is not great. The stability of armalcolite as a function of oxygen fugacity is determined thermogravimetrically at 1200 C and 1 atm. Knowledge of the range of oxygen fugacity at which armalcolite is stable and of the equilibrium oxide mineral assemblages outside this range provides important information about lunar cooling histories in terms of oxygen fugacity.

Friel, J. J.↗
DOE OSTI2021

Superconductivity in type-II Weyl-semimetal WTe 2 induced by a normal metal contact

WTe 2 is a material with rich topological properties: it is a 2D topological insulator as a monolayer and a Weyl-semimetal and higher-order topological insulator in a bulk form. Inducing superconductivity in topological materials is a way to obtain topological superconductivity, which lays at the foundation for many proposals of fault tolerant quantum computing. Here, we demonstrate the emergence of superconductivity at the interface between WTe 2 and the normal metal palladium. The superconductivity has a critical temperature of about 1.2 K. By studying the superconductivity in a perpendicular magnetic field, we obtain the coherence length and the London penetration depth. These parameters correspond to a low Fermi velocity and a high density of states at the Fermi level. This hints to a possible origin of superconductivity due to the formation of flatbands. Furthermore, the critical in-plane magnetic field exceeds the Pauli limit, suggesting a non-trivial nature of the superconducting state.

Kononov, Artem↗
DOE OSTI2020

Spectroscopy of Palladium Nanoparticle Synthesis: Tailoring Nanoparticle Growth Parameters for Hydrogen Storage

Using palladium for hydrogen storage requires palladium (Pd) particles exhibiting specific parameters, including surface area, particle size, and particle shape, with increased interest in palladium nanoparticles (Pd NPs). In order to routinely monitor the synthesis of these particles a spectroscopic method is being developed using infrared (IR), Raman, and UV-Vis spectroscopy. By monitoring the production of Pd NPs, the growth of the NPs can be controlled to ensure quality of the product to match the desired finished particle specifications. For the reaction presented, the conversion of the intermediate tetraamminepalladium(II) chloride (PTC) to diamminepalladium(II) chloride (PDC) can influence the Pd NPs properties. This study is first being developed in lab bench scale quantities to allow ultimate control of the Pd NPs.

08 HYDROGEN↗
DOE OSTI2022

Multi-state Catalysts Modulated by Mechanical Force (Final Report)

The development of more efficient catalytic processes and new approaches to control catalytic activity and selectivity are central to the realization of more selective, atom economic, and energy efficient routes to value added chemicals and polymers. The reactivity and selectivity of a transition metal catalyst is intimately related to the ligand-sphere geometry and, in many cases, the ideal ligand geometry for one step of a catalytic cycle is poorly matched to the ideal ligand geometry for another, resulting in sub-optimal efficiency. Macroscopic mechanical forces are both large, potentially much larger than interatomic forces, and are directional and localized to an extent that differentiates them from other forms of energy input such as heat or light. As such, mechanical force represents a heretofore untapped approach to modulate catalyst geometry, with the potential to reversibly modulate catalyst geometry on the timescale of catalytic turnover or monomer enchainment. This project has addressed the fundamental challenges in material-to-molecule strain coupling associated with the development of a new class of mechanically responsive catalysts (mechanocatalysts) in which active organotransition metal catalysts are strategically embedded in a flexible polymer network such that application of external mechanical force (stretching or deformation) leads to modulation of catalyst geometry, and hence reactivity and selectivity. Our efforts during the tenure of this grant were directed toward the elucidation of force-reactivity relationships of elementary transformations that occur within the first coordination sphere of a transition metal complex employing stiff stilbene photoswitches tethered to a flexible bidentate phosphine ligand derived from MeOBiphep as molecular force probes which provide a range of compressive and extension forces to the coupled transition metal complex depending on the geometry of the stiff stilbene and length of the tethering chains. During the tenure of this grant, we have quantified the rate of C(sp 2 )-C(sp 2 ) reductive elimination from platinum(II) diaryl complexes containing bis(phosphine) force probe ligands as a function of mechanical force; compressive forces decreased the rate of reductive elimination whereas extension forces increased the rate relative to the strain-free MeOBiphep complex with a 3.4-fold change in rate over a ~290 pN range of restoring forces. In a similar manner, we have quantified the rate of oxidative addition of bromobenzene to low-ligated palladium(0) complexes containing force probe ligands as a function of mechanical force; compressive forces increase the rate of oxidative addition, whereas tensile forces decrease the rate with a ~6 fold change in rate across ~340 pN of force applied to the complexes. In both cases, experimental and computational analyses argue strongly against any significant force-induced perturbation of ground state geometry within the first coordination sphere of the reactant complexes. Rather, the force/rate behavior observed for these transformations across these ranges of forces is attributed to the coupling of force to the nuclear motion comprising the reaction coordinates for reductive elimination and oxidative addition. These results together inform the development of catalysts whose activity can be tuned by an external force that is adjusted within a catalytic cycle and suggest opportunities to experimentally map geometry changes associated with reactions in transition metal complexes and potential strategies for force-modulated catalysis.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2026

Quasi-In-Situ Analysis of Electrode Top Atomic Layers via High-Sensitivity Low-Energy Ion Scattering and Potential-Controlled Sample Transfer

Electrocatalytic reactions involve interfacial interactions between the surfaces of electrodes and reactive species at an electrolyte interface. There are presently no universal or unambiguous methods to directly assay the active top atomic layer composition that influences the reactivity of these electrodes under relevant operating conditions. Low-energy ion scattering (LEIS) spectroscopy is a surface characterization technique that yields compositional analysis of the outermost atomic layer of a material, but it must be performed in ultrahigh vacuum (UHV). Application of LEIS measurements to electrochemical materials that are removed from ambient liquid-phase environments thus leaves an open question as to whether the surface that is transferred to UHV is truly the surface that manifested during the electrochemical reaction. Toward the goal of preserving the active surface state, we developed a sample transfer workflow for LEIS enabling air-free removal and drying of an electrode from an electrochemical cell while maintaining control of the potential using an auxiliary electrode. The potential-controlled emersion method was demonstrated to give distinct potential-dependent surface compositions for a Cu−Pd alloy relative to removal after uncontrolled return to open-circuit potential. A Cu-enriched surface was found at anodic potential and a Pd-enriched surface at cathodic potential, suggesting that the approach can be used to retain representative atomic configurations during transfer. Since adsorbates will often persist from the reaction environment, conventional sample pretreatment methods for removal, including atomic O and atomic H exposure, were also contrasted. Both methods were found to differ with results from incidental low-dose depth profiling by the LEIS primary ion source, which removes adventitious species and surface atoms during the course of repeated measurements. These depth profiles were found to be sensitive to sample history and thus qualitatively informative, despite the possible changes induced by ion damage. The results exhibit (i) the need for complete control over the polarization state of the sample at all times (no excursions to open circuit during transfer) and (ii) the utility of low-dose depth profiling to capture changes in the near-surface composition.

Alloys↗
DOE OSTI2025

Orientation Control in Epitaxial PdO Thin Films Grown on MgO (001) – Role of Oxygen Chemical Potential

Control of crystal orientations in thin films of functional materials allowsedictive tuning of their strain states, electronic properties, and surface chemical reactivity. Here, conditions for orientation control in epitaxial PdO films are investigated. Due to its tetragonal structure, PdO can form two orientational relationships with the MgO (001). It is shown that, under an oxygen-rich environment provided by oxygen-plasma-assisted molecular beam epitaxy, both (00l)- and (100)-oriented PdO domains form on MgO (001). Subsequent thermal annealing in a vacuum promotes film restructuring to a predominantly (100)-oriented PdO with improved crystallinity. Ab initio calculations reveal that the (001) orientation has lower strain energy but weaker interfacial interactions and serves as an oxygen vacancy sink, whereas the (100) orientation benefits from significantly stronger MgO─PdO bonding. Consequently (100)-oriented domains become favored under oxygen-poor conditions. A mechanism is proposed whereby vacuum annealing drives orientation transformation by generating oxygen vacancies that destabilize the (001) domains and promote (100) ordering. These findings deepen the understanding of how oxygen content impacts interfacial stability and reorganization, thereby offering a route to tune domain orientations in oxide thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Light-driven hydrogen evolution via a novel pincer/no pincer mechanism including a possible concerted proton electron transfer

The road to efficient molecular catalysts for artificial photosynthesis requires a great deal of basic research to address the challenges of anthropogenic global warming. An unexpected result of such research is a novel pincer/no pincer mechanism discovered for the DFT-calculated catalytic cycle of PNP-C2 complexes. Structural parameters from theoretical modeling are supported by single crystal X-ray data for the corresponding complexes. Using the examples of [M(II)Cl(PNP-C2-R)] + (M = Pd 2+ , Ni 2+ ; R = CH 3 , H; PNP-C2 = N,N-bis{(di(2-methoxy-phenyl)phosphanyl)ethyl}-N-alkylamine) this pincer/no pincer mechanism is supported by differential pulse voltammetric, cyclic voltammetric, UV-Vis spectroscopic (combined with voltammetry) and 31 P nuclear magnetic resonance spectroscopic studies. The efficiency of hydrogen evolution during artificial photosynthesis depends significantly on the ratio of photosensitiser and water reduction catalysts. At first sight, the results from irradiation experiments (gas chromatography and mass spectrometry) seem obvious, but show a considerable impact of secondary and tertiary amines within the pincer structure. The best result obtained for the palladium pincer complex was with a secondary amine as a proton relay, delivering a turnover number of 2237 after only 2.5 hours. In contrast the analogous water reduction catalyst with a methylated (tertiary) amine instead of a secondary one gives only 972 turnovers under the same experimental conditions, over the same time. For all photocatalytic measurements the amount of hydrogen is approximately 2.5-times higher when a secondary amine is used as the proton relay. The influences of these different amines on the activity of water reduction catalysts during irradiation experiments in H 2 O or D 2 O lead to evidence of a kinetic isotope effect, supporting a possible concerted proton electron transfer. DFT calculations of reaction enthalpies, activation energies and intrinsic reaction coordinates of the catalytic cycle support the high efficiency of the presented catalysts. In particular, results from secondary amines suggest new candidates as examples of the rarely known concerted proton electron transfer.

14 SOLAR ENERGY↗
DOE OSTI2021

Oxidative Dehydrogenation of Propane to Propylene with Soft Oxidants via Heterogeneous Catalysis

Oxidative dehydrogenation of propane to propylene can be achieved using conventional, oxygen-assisted dehydrogenation of propane (O 2 –ODHP) or via the use of soft oxidants, such as CO 2 , N 2 O, S-containing compounds, and halogens/halides. The major roles of soft oxidants include inhibiting overoxidation and improving propylene selectivity, which are considered to be current challenges in O 2 -assisted dehydrogenation. For both CO 2 – and N 2 O–ODHP reactions, significant efforts have been devoted to developing redox-active (e.g., chromium, vanadate, iron, etc.), nonredox-type main group metal oxide (e.g., group IIIA, gallium), and other transition metal/metal oxide catalysts (e.g., molybdenum, palladium platinum, rhodium, ruthenium, etc.), as well as zeolite-based catalysts with adjustable acid–base properties, unique pore structures, and topologies. Metal sulfides have shown promising performance in DHP, whereas the development of suitable catalysts has lagged for SO 2 - or S-assisted ODHP. Recently, significant efforts have been focused on homogeneous and heterogeneous ODHP using halogens (e.g., Br 2 , I 2 , Cl 2 , etc.) and hydrogen halides (e.g., HCl and HBr) for the development of facile processes for C 3 H 6 synthesis. This work aims to provide a critical, comprehensive review of recent advances in oxidative dehydrogenation of propane with these soft oxidants, especially highlighting the current state of understanding of the following factors: (i) relationships between composition, structure, and catalytic performance, (ii) effects of the support, acidity, and promoters, (iii) reaction pathway and mechanistic insights, and (iv) the various roles of soft oxidants. Theoretical and computational insights toward understanding reaction mechanisms and catalyst design principles are also covered. Future research opportunities are discussed in terms of catalyst design and synthesis, deactivation and regeneration, reaction mechanisms, and alternative approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic Conversion of Ethylene to Value-added Materials (Final Report)

The general goal of the work was to develop new late metal Ni(II)- and Pd(II)-based catalysts and processes to convert ethylene and other readily available α-olefins via polymerization and oligomerization reactions to an array of new value-added materials with high efficiency. An emphasis was placed on invention of new catalysts and processes guided by rational design and detailed mechanistic studies. These investigations have generated new knowledge which may underpin technological advances directed towards new and more efficient methods for utilizing ethylene and α-olefins derived from ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ab Initio Molecular Dynamics Study of Pd Nucleation on a γ-Al 2 O 3 Surface

We perform ab initio molecular dynamics (AIMD) free energy simulations to investigate the stability and dynamics of dispersed Pd atoms and subnanometer clusters on γ-Al 2 O 3 . We consider nucleation for varying Pd loadings on dry γ-Al 2 O 3 (100), dry γ-Al 2 O 3 (110) and wet γ-Al 2 O 3 (110) and examine temperature, entropy and water coverage effects on the stability and dynamics of Pd clusters. At low Pd loading (1.07 Pd atoms/nm 2 on the (100) and 0.75 Pd/nm 2 on the (110)), association of the Pd atoms is thermodynamically unfavorable on the dry surfaces and almost thermoneutral on the wet (110) owing to water blocking of the AlIII defect sites. In agreement with past studies, the Pd atoms are quite mobile but the diffusion free energy barriers do not increase with the water coverage, as previously suggested, but rather remain similar in magnitude owing to translational entropy at finite temperatures. At these Pd loadings, oxidized Pd(II) atoms on the wet (110) surface are dispersed and immobile. At higher Pd loading (1.12 and 1.5 Pd atoms/nm 2 ) on the (110) surface, Pd 3 and Pd 4 clusters are thermodynamically very stable and form fast. At the 1.12 Pd atoms/nm 2 loading, the formation of the Pd 3 cluster is two orders of magnitude slower when the surface is hydroxylated as the system becomes somewhat trapped before the dinuclear cluster Pd 2 collides with a Pd atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dioxin-Linked Covalent Organic Framework-Supported Palladium Complex for Rapid Room-Temperature Suzuki–Miyaura Coupling Reaction

Covalent organic framework (COF)-supported palladium catalysts have garnered enormous attention for cross-coupling reactions. However, the limited linkage types in COF hosts and their suboptimal catalytic performance have hindered their widespread implementation. Herein, we present the first study immobilizing palladium acetate onto a dioxin-linked COF (Pd/COF-318) through a facile solution impregnation approach. By virtue of its permanent porosity, accessible Pd sites arranged in periodic skeletons, and framework robustness, the resultant Pd/COF-318 exhibits exceptionally high activity and broad substrate scope for the Suzuki–Miyaura coupling reaction between aryl bromides and arylboronic acids at room temperature within an hour, rendering it among the most effective Pd/COF catalysts for Suzuki–Miyaura coupling reactions to date. Moreover, Pd/COF-318 demonstrates excellent recyclability, retaining high activity over five cycles without significant deactivation. The leaching test confirms the heterogeneity of the catalyst. This work uncovers the vast potential of dioxin-linked COFs as catalyst supports for highly active, selective, and durable organometallic catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Pd III Sulfate Dimer Initiates Rapid Methane Monofunctionalization by H Atom Abstraction

An electrogenerated Pd III 2 species in fuming sulfuric acid is competent for rapid and concurrent methane monohydroxylation to methyl bisulfate (CH 3 OSO 3 H) and methane sulfonation to methanesulfonic acid (CH 3 SO 3 H). In situ NMR at 50 °C is used to track methane transformation exclusively to CH 3 OSO 3 H and CH 3 SO 3 H at high conversions. Integrating a set of kinetic and computational studies, the mechanism of methane monofunctionalization by Pd III 2 is examined. Here, experimental rate laws and common kinetic isotope effects for CH 3 OSO 3 H and CH 3 SO 3 H formation suggest that both transformations proceed via a common rate-limiting C-H activation step. Introduction of O 2 or Pd II,III 2 suppresses CH 3 SO 3 H generation, indicating a radical chain sequence. Although the metal-metal bonded Pd III 2 complex is a net two-electron oxidant, our aggregate kinetic data point to a mechanistic model that features rate-limiting H atom abstraction by the Pd III 2 complex to generate a methyl radical intermediate. The CH 3 • intermediate then recombines with Pd II,III 2 to furnish a CH 3 Pd III 2 intermediate that reductively eliminates CH 3 OSO 3 H. Alternatively, the CH 3 intermediate can enter a chain reaction with SO 3 to generate CH 3 SO 3 H. DFT computations support the radical-based C-H activation by Pd III 2 and delineate H atom abstraction pathways with computed reaction barriers and kinetic isotope effects (KIEs) that are consistent with experimental data. These mechanistic investigations challenge the paradigm of electrophilic C-H activation and highlight H atom abstraction as a potent pathway for selective methane C-H oxidative functionalization at high reaction rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2006

Development and Characterization of Improved NiTiPd High-Temperature Shape-Memory Alloys by Solid-Solution Strengthening and Thermomechanical Processing

The need for compact, solid-state actuation systems for use in the aerospace, automotive, and other transportation industries is currently motivating research in high-temperature shape-memory alloys (HTSMA) with transformation temperatures greater than 100 C. One of the basic high-temperature alloys investigated to fill this need is Ni(19.5)Ti(50.5)Pd30. Initial testing has indicated that this alloy, while having acceptable work characteristics, suffers from significant permanent deformation (or ratcheting) during thermal cycling under load. In an effort to overcome this deficiency, various solid-solution alloying and thermomechanical processing schemes were investigated. Solid-solution strengthening was achieved by substituting 5at% gold or platinum for palladium in Ni(19.5)Ti(50.5)Pd30, the so-called baseline alloy, to strengthen the martensite and austenite phases against slip processes and improve thermomechanical behavior. Tensile properties, work behavior, and dimensional stability during repeated thermal cycling under load for the ternary and quaternary alloys were compared. The relative difference in yield strength between the martensite and austenite phases and the dimensional stability of the alloy were improved by the quaternary additions, while work output was only minimally impacted. The three alloys were also thermomechanically processed by cycling repeatedly through the transformation range under a constant stress. This so-called training process dramatically improved the dimensional stability in these samples and also recovered the slight decrease in work output caused by quaternary alloying. An added benefit of the solid-solution strengthening was maintenance of enhanced dimensional stability of the trained material to higher temperatures compared to the baseline alloy, providing a greater measure of over-temperature capability.

Bigelow, Glen↗