Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PULSED IRRADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Compositional and Microstructural Evolution of Olivine Under Multiple-Cycle Pulsed Laser Irradiation as Revealed by FIB/Field-Emission TEM

The use of pulsed laser irradiation to simulate the short duration, high-energy conditions characteristic of micrometeorite impacts is now an established approach in experimental space weathering studies. The laser generates both melt and vapor deposits that contain nanophase metallic Fe (npFe(sup 0)) grains with size distributions and optical properties similar to those in natural impact-generated melt and vapor deposits. There remains uncertainty, however, about how well lasers simulate the mechanical work and internal (thermal) energy partitioning that occurs in actual impacts. We are currently engaged in making a direct comparison between the products of laser irradiation and experimental/natural hypervelocity impacts. An initial step reported here is to use analytical SEM and TEM is to attain a better understanding of how the microstructure and composition of laser deposits evolve over multiple cycles of pulsed laser irradiation.

Christoffersen, R.↗

Effect of pulsed laser irradiation on the structure of GeTe films deposited by metal organic chemical vapor deposition: A Raman spectroscopy study

Phase changes between amorphous and crystallized states were induced by laser irradiation with nanosecond pulses in Ge{sub x}Te{sub y} films grown by metal organic chemical vapor deposition. The different phases were obtained by adjusting the pulse energy and could be distinguished by their different optical reflectivities. The corresponding structural changes were studied by Raman spectroscopy, showing marked differences for the two phases. A clear correlation is found between optical reflectivity levels, crystallographic state and the evolution of Ge-Ge, Te-Te, and Ge-Te Raman bands.

36 MATERIALS SCIENCE↗

Compositional and Microstructural Evolution of Olivine During Pulsed Laser Irradiation: Insights Based on a FIB/Field-Emission TEM Study

Introduction: The use of pulsed laser irradiation to simulate the short duration, high-energy conditions characteristic of micrometeorite impacts is now an established approach in experimental space weathering studies. The laser generates both melt and vapor deposits that contain nanophase metallic Fe (npFe(sup 0)) grains with size distributions and optical properties similar to those in natural impact-generated melt and vapor deposits. There remains uncertainty, however, about how well lasers simulate the mechanical work and internal (thermal) energy partitioning that occurs in actual impacts. We are currently engaged in making a direct comparison between the products of laser irradiation and experimental/natural hypervelocity impacts. An initial step reported here is to use analytical TEM is to attain a better understanding of how the microstructure and composition of laser deposits evolve over multiple cycles of pulsed laser irradiation. Experimental Methods: We irradiated pressed-powder pellets of San Carlos olivine (Fo(sub 90)) with up to 99 rastered pulses of a GAM ArF excimer laser. The irradiated surface of the sample were characterized by SEM imaging and areas were selected for FIB cross sectioning for TEM study using an FEI Quanta dual-beam electron/focused ion beam instrument. FIB sections were characterized using a JEOL2500SE analytical field-emission scanning transmission electron microscope (FE-STEM) optimized for quantitative element mapping at less than 10 nm spatial resolutions. Results: In the SEM the 99 pulse pressed pellet sample shows a complex, inhomogeneous, distribution of laser-generated material, largely concentrated in narrow gaps and larger depressions between grains. Local concentrations of npFe0 spherules 0.1 to 1 micrometers in size are visible within these deposits in SEM back-scatter images. Fig. 1 shows bright-field STEM images of a FIB cross-section of a one of these deposits that continuously covers the top and sloping side of an olivine grain. The deposit has 3 microstructurally distinct sub-layers composed of silicate glass with varying modal fractions and size distributions of npFe( sup 0) spherules, along with nanocrystalline silicate material. A relatively thin (50-300 nm) topmost surface layer has a high-concentration of npFe0 spherules 5-20 nm in size. Element mapping shows the layer to be enriched in Fe by a factor of 2.5 relative to the olivine substrate, with Mg and Si depleted by 20% and 10% respectively. This is compositionally complementary to the underlying, middle layer of the deposit that is depleted in Fe, enriched in Mg and has a much lower npFe0 concentration. A third layer of nanocrystalline olivine occurs at the substrate interface. Discussion: The FE-STEM results suggest the topmost layer is a vapor deposit, underlain by a thicker microstructurally complex melt-generated layer. The compositional relations suggest the melt layer was partially vaporized, preferentially losing more volatile elements (e.g., Fe). The vaporized material re-condensed to form the thin, npFe(sup 0)-rich surface deposit during or immediately after the scan cycle. Nanocrystalline olivine that grew within the melt layer as it formed and cooled is similar in volume and microstructure to what we have observed in the impact melt lining of a micrometeorite impact crater in olivine. This suggest the time-temperature relations attained in the laser sample may not be too different from a micrometeorite impact. Our TEM observations, however, do not show evidence for the same level of mechanical dam-age (e.g., fracturing) seen around the natural micrometeorite crater.

Christoffersen, R.↗

Space charge limited electron emission from a Cu surface under ultrashort pulsed laser irradiation

In this theoretical study, the electron emission from a copper surface under ultrashort pulsed laser irradiation is investigated using a one dimensional particle in cell model. Thermionic emission as well as multi-photon photoelectron emission were taken into account. The emitted electrons create a negative space charge above the target, consequently the generated electric field reduces the electron emission by several orders of magnitude. The simulations indicate that the space charge effect should be considered when investigating electron emission related phenomena in materials under ultrashort pulsed laser irradiation of metals.the word ''abstract,'' but do replace the rest of this text.

74 ATOMIC AND MOLECULAR PHYSICS↗

In situ investigation of formation of self-assembled nanodomain structure in lithium niobate after pulse laser irradiation

The evolution of the self-assembled quasi-regular micro- and nanodomain structures after pulse infrared laser irradiation was studied by in situ optical observation. The average periods of the structures are much less than the sizes of the laser spots. The polarization reversal occurs through covering of the whole irradiated area by the nets of the spatially separated nanodomain chains and microdomain rays--''hatching effect.'' The main stages of the anisotropic nanodomain kinetics: nucleation, growth, and branching, have been singled out. The observed abnormal domain kinetics was attributed to the action of the pyroelectric field arising during cooling after laser heating.

36 MATERIALS SCIENCE↗

Phase transformation and crystallization kinetics of a-Ge/Cu bilayer for blue-ray recording under thermal annealing and pulsed laser irradiation

Similar phase formation and crystallization behaviors have been observed in the a-Ge/Cu bilayer under thermal annealing and pulsed laser irradiation. The Cu{sub 3}Ge phase would form prior to the crystallization of a-Ge. The crystallization temperature and activation energy for crystallization of a-Ge were reduced to 310 deg. C and 2.75 eV, respectively, due to the fast Ge diffusion in the already formed germanide phases. The reaction exponent m of {approx}2.0 for the a-Ge/Cu bilayer corresponds to a crystallization process in which grain growth occurs with nucleation, and the nucleation rate decreases with the progress of the grain growth process. Under pulsed laser irradiation, the maximum data-transfer-rates of 44, 56, 74, and 112 Mbit/s can be achieved in the write-once blue-ray disk at the recording powers of 3, 4, 5, and 6 mW, respectively. The a-Ge/Cu bilayer also demonstrated sufficient optical contrast and adequate absorptance for low power and high speed write-once blue-ray recording.

36 MATERIALS SCIENCE↗

Model of defect reactions and the influence of clustering in pulse-neutron-irradiated Si

Transient reactions among irradiation defects, dopants, impurities, and carriers in pulse-neutron-irradiated Si were modeled taking into account the clustering of the primal defects in recoil cascades. Continuum equations describing the diffusion, field drift, and reactions of relevant species were numerically solved for a submicrometer spherical volume, within which the starting radial distributions of defects could be varied in accord with the degree of clustering. The radial profiles corresponding to neutron irradiation were chosen through pair-correlation-function analysis of vacancy and interstitial distributions obtained from the binary-collision code MARLOWE, using a spectrum of primary recoil energies computed for a fast-burst fission reactor. Model predictions of transient behavior were compared with a variety of experimental results from irradiated bulk Si, solar cells, and bipolar-junction transistors. The influence of defect clustering during neutron bombardment was further distinguished through contrast with electron irradiation, where the primal point defects are more uniformly dispersed.

36 MATERIALS SCIENCE↗

Pulsed-Laser Irradiation Space Weathering Of A Carbonaceous Chondrite

Grains on the surfaces of airless bodies experience irradiation from solar energetic particles and melting, vaporization and recondensation processes associated with micrometeorite impacts. Collectively, these processes are known as space weathering and they affect the spectral properties, composition, and microstructure of material on the surfaces of airless bodies, e.g. Recent efforts have focused on space weathering of carbonaceous materials which will be critical for interpreting results from the OSIRIS-REx and Hayabusa2 missions targeting primitive, organic-rich asteroids. In addition to returned sample analyses, space weathering processes are quantified through laboratory experiments. For example, the short-duration thermal pulse from hypervelocity micrometeorite impacts have been simulated using pulsed-laser irradiation of target material e.g. Recent work however, has shown that pulsed-laser irradiation has variable effects on the spectral properties and microstructure of carbonaceous chondrite samples. Here we investigate the spectral characteristics of pulsed-laser irradiated CM2 carbonaceous chondrite, Murchison, including the vaporized component. We also report the chemical and structural characteristics of specific mineral phases within the meteorite as a result of pulsed-laser irradiation.

Thompson, M. S.↗

Fractal analysis of collision cascades in pulsed-ion-beam-irradiated solids [Collision cascade densities in ion pulsed ion irradiated solids { a fractal approach]

The buildup of radiation damage in ion-irradiated crystals often depends on the spatial distribution of atomic displacements within collision cascades. Although collision cascades have previously been described as fractals, the correlation of their fractal parameters with experimental observations of radiation damage buildup remains elusive. Here, we use a pulsed-ion-beam method to study defect interaction dynamics in 3C-SiC irradiated at 100 °C with ions of different masses. These data, together with results of previous studies of SiC and Si, are analyzed with a model of radiation damage formation which accounts for the fractal nature of collision cascades. Our emphasis is on the extraction of the effective defect diffusion length from pulsed beam measurements. Results show that, for both Si and SiC, collision cascades are mass fractals with fractal dimensions in the range of ~1–2, depending on ion mass, energy, and the depth from the sample surface. Within our fractal model, the effective defect diffusion length is ~10 nm for SiC and ~20 nm for Si, and it decreases with increasing cascade density. These results demonstrate a general method by which the fractal nature of collision cascades can be used to explain experimental observations and predict material’s response to radiation.

36 MATERIALS SCIENCE↗

Microscopy X-ray imaging enriched with small angle X-ray scattering for few nanometer resolution reveals shock waves and compression in intense short pulse laser irradiation of solids

Understanding how laser pulses compress solids into high-energy-density states requires diagnostics that simultaneously resolve macroscopic geometry and nanometer-scale structure. Here we present a combined X-ray imaging (XRM) and small-angle X-ray scattering (SAXS) approach that bridges this diagnostic gap. Using the Matter in Extreme Conditions end station at LCLS, we irradiated 25 μm copper wires with 45 fs, 0.9 J, 800 nm pulses at 3.5 × 10 19 W/cm 2 while probing with 8.2 keV XFEL pulses. XRM visualizes the evolution of ablation, compression, and inward-propagating fronts with ∼ 200 nm resolution, while SAXS quantifies their nanometer-scale sharpness via the time-resolved evolution of scattering streaks. The joint analysis reveals that an initially smooth compression steepens into a nanometer-sharp shock front after t sh ≈ (18 ± 3) ps, consistent with an analytical steepening model and hydrodynamic simulations. The front reaches a velocity of c sh ≈ 25 k m / s and a lateral width of several tens of microns, demonstrating direct observation of shock formation and decay at solid density for the first time with few-nanometer precision. This integrated XRM–SAXS method establishes a quantitative, multi-scale diagnostic of laser-driven shocks in dense plasmas relevant to inertial confinement fusion, warm dense matter, and planetary physics.

Kluge, Thomas [Helmholtz-Zentrum Dresden-Rossendor↗

Nanopatterns induced by pulsed laser irradiation on the surface of an Fe-Al alloy and their magnetic properties

We have studied nanopatterns induced by nanosecond pulsed laser irradiation on (111) plane surfaces of a polycrystalline iron-aluminum alloy and evaluated their magnetic properties. Multiple nanosecond pulsed laser irradiation induces a wavelength-dependent surface transformation of the lattice structure from a B2-type to a supersaturated body centered cubic lattice. The selective formation of surface nanopatterns consisting of holes, stripes, polygonal networks, and dot-like nanoprotrusions can be observed. Furthermore, focused magneto-optical Kerr effect measurements reveal that the magnetic properties of the resultant nanostructured region changes from a paramagnetic to a ferromagnetic phase in accordance with the number of laser pulses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of melting on the acoustic response of CdTe and GaAs subjected to the pulsed laser irradiation

The effect of a threshold process of surface melting on the acoustic response in CdTe and GaAs subjected to pulsed laser radiation is considered and the mechanisms of excitation of sonic signals are analyzed. Melting thresholds of the surface of binary compounds CdTe and GaAs are established under irradiation by pulses of nanosecond duration of ruby and neodymium lasers from measurements of the amplitude of the acoustic response.

36 MATERIALS SCIENCE↗

Nickel-induced crystallization of amorphous Ge film for blue-ray recording under thermal annealing and pulsed laser irradiation

The crystallization kinetics of a-Ge thin film induced by a thin Ni layer under thermal annealing and pulsed laser irradiation has been studied. Under thermal annealing, the crystallization temperature and activation energy for crystallization of a-Ge in the a-Ge/Ni bilayer recording film were significantly reduced to 385 deg. C and 2.4 eV, respectively, due to the fast Ge diffusion in the already formed germanide phases. The reaction exponent m of approx1.7 for the a-Ge/Ni bilayer corresponds to a crystallization process in which grain growth occurs with nucleation and the nucleation rate decreases with the progress of the grain growth process. Under pulsed laser irradiation, the maximum data-transfer rates of 22, 56, 74, and 112 Mbits/s can be achieved in the write-once blue-ray disk at the recording powers of 3, 4, 5, and 6 mW, respectively.

36 MATERIALS SCIENCE↗

Post-Deposition Induced Conductivity in Pulsed Laser Irradiated Metal Doped Zinc Oxide Films

The optical and electrical properties of doped solution-deposited and rf sputter-deposited thin metal oxide films were investigated following post deposition pulsed laser irradiation. Solution deposited films were annealed at 450 ºC. Following the heating regiment, the transparent metal oxide films were subjected to 355 nm pulsed Nd:YAG laser irradiation (4 nsec pulsewidth) at fluences between 5 and 150 mJ/cm2. Irradiation times at pulse frequencies of 30 Hz ranged from seconds to tens of minutes. Film densification, index change and a marked increase in conductivity were observed following irradiation in air and under vacuum of Al:ZnO (AZO), Ga:ZnO (GZO), and In:ZnO (IZO) films deposited on silica substrates. Despite the measured increase in conductivity, all films continued to show high transparency on the order of 90% at wavelengths from the band edge well into the near infrared region of the spectrum. Laser energies required for turning on the conductivity of these films varied depending upon the dopant. Irradiations in air yielded resistivity measurements on the order of 16.cm. Resistivities of films irradiated under vacuum were on the order of 0.1.cm. The increase in conductivity can be attributed to the formation of oxygen vacancies and subsequent promotion of free carriers into the conduction band. All irradiated films become insulating after around 24 hours. Oxygen atoms in air become reduced by electrons in the metal conduction band and diffuse into the vacancies in the lattice. The rate of this reduction process depends on the type of dopant. This work also sheds light on the damage threshold, correlating the optical properties with the presence of free carriers that have been introduced into the conduction band. All films were characterized by means of UV-VIS-NIR transmission spectroscopy, visible and UV Raman spectroscopy and Hall measurements. Analysis of interference fringes in measured transmission spectra allowed film density and refractive index to be evaluated while the Raman measurements showed an increase in LO mode intensity with respect to the TO mode intensity as the films became more conducting. Results of this study are not only important for the continued development of transparent conducting oxide films that find use in photovoltaic cells and solid state lighting modules, but also provide evidence for the role of free carriers in initiating the laser damage process in these wide bandgap metal oxide films.

14 SOLAR ENERGY↗

Intense femtosecond photoexcitation of bulk and monolayer MoS{sub 2}

The effect of femtosecond laser irradiation on bulk and single-layer MoS{sub 2} on silicon oxide is studied. Optical, field emission scanning electron microscopy and Raman microscopy were used to quantify the damage. The intensity of A{sub 1g} and E{sub 2g}{sup 1} vibrational modes was recorded as a function of the number of irradiation pulses. The observed behavior was attributed to laser-induced bond breaking and subsequent atoms removal due to electronic excitations. The single-pulse optical damage threshold was determined for the monolayer and bulk under 800 nm and 1030 nm pulsed laser irradiation, and the role of two-photon versus one photon absorption effects is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Wavelength-dependent magnetic transitions of self-organized iron–aluminum stripes induced by pulsed laser irradiation

We investigate the laser wavelength dependence of structural and magnetic transitions on the surface of an iron–aluminum (FeAl) alloy induced by nanosecond pulsed laser irradiation. The formation of self-organized FeAl stripes with a wavelength-dependent period is observed in a local area on the (111)-oriented plane. Focused magneto-optical Kerr effect measurements reveal that the coercivity reaches up to 1.2 kOe with increasing the magnetic field rotation angle, which is estimated from the stripe direction, in FeAl stripes irradiated at 355 nm, and its magnetization reversal can be explained by the domain-wall motion model. On the other hand, the magnetization reversal agrees with the Stoner–Wohlfarth model in FeAl stripes irradiated at 1064 nm. This magnetic transition originates from the B2-to-A2 phase transition in stripe structures and bulk regions. These results indicate that the magnetic transition from the incoherent to coherent mode as well as the structural transformation of stripe patterns can be controlled by the incident laser wavelength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kr photoionized plasma induced by intense extreme ultraviolet pulses

Irradiation of any gas with an intense EUV (extreme ultraviolet) radiation beam can result in creation of photoionized plasmas. The parameters of such plasmas can be significantly different when compared with those of the laser produced plasmas (LPP) or discharge plasmas. In this work, the photoionized plasmas were created in a krypton gas irradiated using an LPP EUV source operating at a 10 Hz repetition rate. The Kr gas was injected into the vacuum chamber synchronously with the EUV radiation pulses. The EUV beam was focused onto a Kr gas stream using an axisymmetrical ellipsoidal collector. The resulting low temperature Kr plasmas emitted electromagnetic radiation in the wide spectral range. The emission spectra were measured either in the EUV or an optical range. The EUV spectrum was dominated by emission lines originating from Kr III and Kr IV ions, and the UV/VIS spectra were composed from Kr II and Kr I lines. The spectral lines recorded in EUV, UV, and VIS ranges were used for the construction of Boltzmann plots to be used for the estimation of the electron temperature. It was shown that for the lowest Kr III and Kr IV levels, the local thermodynamic equilibrium (LTE) conditions were not fulfilled. The electron temperature was thus estimated based on Kr II and Kr I species where the partial LTE conditions could be expected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simultaneous observation of nascent plasma and bubble induced by laser ablation in water with various pulse durations

We investigate the effects of pulse duration on the dynamics of the nascent plasma and bubble induced by laser ablation in water. To examine the relationship between the nascent plasma and the bubble without disturbed by shot-to-shot fluctuation, we observe the images of the plasma and the bubble simultaneously by using two intensified charge coupled device detectors. We successfully observe the images of the plasma and bubble during the pulsed-irradiation, when the bubble size is as small as 20 μm. The light-emitting region of the plasma during the laser irradiation seems to exceed the bubble boundary in the case of the short-pulse (30-ns pulse) irradiation, while the size of the plasma is significantly smaller than that of the bubble in the case of the long-pulse (100-ns pulse) irradiation. The results suggest that the extent of the plasma quenching in the initial stage significantly depends on the pulse duration. Also, we investigate how the plasma-bubble relationship in the very early stage affects the shape of the atomic spectral lines observed at the later delay time of 600 ns. The present work gives important information to obtain high quality spectra in the application of underwater laser-induced breakdown spectroscopy, as well as to clarify the mechanism of liquid-phase laser ablation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗