Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Pressure dependence of Poisson’s ratio of glassy Baltic amber studied by Brillouin scattering spectroscopy

Amber is a typical natural glass with very long aging time. Elastic properties of amber at high pressures have been studied using Brillouin scattering and a diamond anvil cell. Both longitudinal and transverse acoustic modes have been observed up to 12 GPa. The pressure dependences of longitudinal, shear, Young’s, and bulk moduli, compressibility, and Poisson’s ratio were determined. The longitudinal, shear, Young’s, bulk moduli show the remarkable increase, and compressibility shows a marked decrease with increasing pressure. However, it is found that the pressure dependence of Poisson’s ratio is very small. The mechanism of this small pressure dependence was discussed. Finally, the Cauchy type relation between longitudinal and shear moduli was examined. Its coefficients show the deviation from the Cauchy relation owing to the coexistence of different intermolecular interactions in amber.

07 ISOTOPE AND RADIATION SOURCES↗

Numerical investigation of the pressure-dependence of yield sooting indices for n-alkane and aromatic species

The pressure-dependence of the Yield Sooting Index (YSI), as a measure of sooting tendency, is numerically investigated for pressures ranging from 1 atm to 15 atm. Straight-chain alkanes, including ethane, propane, n-hexane, n-heptane, and n-dodecane, and aromatic species, including benzene, toluene, xylene, and ethylbenzene, are selected as test fuels. A detailed chemical mechanism is used for all test fuels considered, and a flamelet-based YSI simulation methodology is employed, where the YSI values are computed based on the Polycyclic Aromatic Hydrocarbon (PAH) dimer production rate at each pressure. It is found that the maximum flame centerline soot volume fraction increases with increasing pressure for all test compounds. However, the pressure dependence of the maximum soot volume fraction is similar for the hydrocarbons within the same class (n-alkane or aromatics). As a consequence, the YSI values computed at pressures up to 15 atm show only small deviations from their values computed and measured at atmospheric pressure. These results suggest that YSI is robust also at elevated pressures, close to those found in practical combustion devices. This study is entirely based on numerical simulations without any experimental measurements available for direct validation. Experimental YSI measurements at high pressures would be required to fully confirm the conclusions reported in this manuscript. Still, our numerical results provide some guidelines for the design of such experiments in the future.

42 ENGINEERING↗

The role of a pressure-dependent rheology in the dynamics of mantle circulation

A thermomechanical model for upper mantle convection was constructed such that the thickness and the structure of the lithosphere are determined self consistently by the heat transported by convection. In this study of the interaction between the lithosphere and upper mantle, strongly temperature and pressure dependent rheologies for both Newtonian and non-Newtonian creep mechanisms are employed. For a strictly temperature dependent rheology an insignificant amount of heat, less than 12.5 mW/sq m, can be transported convectively for an interior viscosity, 0(10 sup 21 Pas), compatible with post glacial rebound. On the other hand, for similar values of the interior viscosity, steady heat fluxes between 20 and 40 mW/sq m are produced by introducing pressure dependence into the rheology. For the temperature and pressure dependent flow law the horizontally averaged interior temperature displays very little variation with the amount of heat evacuated, once all of the rheological parameters are fixed. This finding may have important ramifications for parameterized convection.

Yuen, D. A.↗

Modeling study on pressure dependence of plasma structure and formation in 110 GHz microwave air breakdown

Recent experimental studies of 110 GHz microwave air volume breakdown have shown that as pressure is decreased from atmosphere to a few torr, the discharge transitions from a well-defined array to a smeared-out array and finally to a diffuse plasma. In this letter, a two-dimensional model coupling plasma fluid equations and Maxwell equations is used to simulate the pressure dependence of plasma structure and formation under conditions similar to the experiments. The modeling pressure dependence of plasma structures in H plane and E plane is qualitatively consistent with the experimental observation. The quantitative discrepancy between modeling and experimental results is explained. The simulations allow a good understanding of plasma structure at different pressures in microwave volume breakdown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mantle convection with internal heating and pressure-dependent thermal expansivity

Recent laboratory work suggests that the thermal expansivity alpha of the mantle decreases strongly with pressure. alpha determines the buoyancy of plumes and the rate at which plumes lose their thermal signature as they rise, and so may be expected to have a strong influence on the temperature and velocity structure of the mantle. Numerical simulations were conducted on convection in an internally heated, compressible mantle including constant and pressure-dependent alpha and thermal conductivity kappa. They show that a pressure-dependent alpha allows the existence of thermal plumes rising from the core-mantle boundary, however the plumes are weak and dissipate higher in the mantle.

Leitch, A. M.↗

Structure and pressure dependence of the Fermi surface of lithium

Here, we report studies of the Fermi surface (FS) of isotopically pure polycrystalline 7 Li from ambient pressure to 4.7 GPa. Shubnikov–de Haas (SdH) oscillations at 300 mK in external magnetic fields up to 35 T are measured to map the spherical parts of the FS of lithium. Our ambient pressure data show that the principal SdH frequencies consist of three distinct peaks at 41.25 ± 0.05, 41.65 ± 0.05, and 42.05 ± 0.05 kT, which are theoretically consistent with the presence of two crystal structure domains exhibiting nearly spherical FS. The size of the spherical parts of the FS is compatible with bcc and fcc crystal structures. The measured frequencies at 41.25 and 42.65 kT present direct quantitative evidence for the spherical deformation of the FS in fcc Li. Our high-pressure data show that while the FS of Li deforms under compression, it remains mostly spherical up to 4.7 GPa and the pressure dependence of the SdH frequency is consistent with the theoretically calculated pressure dependence in the fcc structure. Finally, we find that the electron effective mass does not deviate under pressure significantly from its ambient pressure value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-Dependent Magnetic Properties of Quasi-2D Cr 2 Si 2 Te 6 and Mn 3 Si 2 Te 6

Recently, pressure has been used to induce structural and magnetic phase transitions in many layered quantum materials whose layers are linked by van der Waals forces. Materials with such weakly held layers allow for relatively easy manipulation of the superexchange mechanism, which can give rise to novel magnetic behavior. Here, using hydrostatic pressure as a disorderless means to manipulate the interlayer coupling, we applied pressure on two quasi-2D sister compounds, namely, Cr 2 Si 2 Te 6 (CST) and Mn 3 Si 2 Te 6 (MST), up to ~1 GPa. Magnetic property measurements with the application of pressure revealed that the ferromagnetic transition temperature decreases in CST, while the opposite occurs for the ferrimagnetic MST. In MST, magnetization decreases with the increase in pressure, and such a trend is not clearly observed within the pressure range studied for CST. The overall pressure effect on magnetic characteristics such as exchange couplings and magnetic anisotropy energies is also examined theoretically using density functional theory. Exchange coupling in MST is strongly frustrated, and the first nearest neighbor interaction is the most dominant of the components with the strongest pressure dependence. In CST, the exchange coupling parameters exhibit very little dependence on pressure. This combined experimental and theoretical work has the potential to expand to other relevant quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical study of pressure dependence of transition temperature of In and Pb

Recently proposed structured local pseudopotential (PP) by Fiolhais et al. has been successfully used to compute superconducting state parameters (SSP): electron-phonon coupling strength (λ), Coulomb pseudopotential (μ*), critical temperature (T{sub c}), effective interaction strength (N{sub 0}V), isotopic effect parameter (α) and their pressure dependence of non-transition metals In and Pb as a test case. Pressure dependence of the Debye temperature has been computed by Gruneisen model. Present results are in good agreement with experimental and other theoretical results. Present study has been further extended to estimate volume (critical volume) at which λ=μ*, where Tc and N{sub 0}V becomes zero. The presently used model is found to be transferable at the extreme environment without any adjustment of parameters further alongwith its simplicity and predictivity.

36 MATERIALS SCIENCE↗

Pressure dependence of the optical properties of the charge-density-wave compound LaTe2

We report the pressure dependence of the optical response of LaTe{sub 2}, which is deep in the charge-density-wave (CDW) ground state even at 300 K. The reflectivity spectrum is collected in the mid-infrared spectral range at room temperature and at pressures between 0 and 7 GPa. We extract the energy scale due to the single particle excitation across the CDW gap and the Drude weight. We establish that the gap decreases upon compressing the lattice, while the Drude weight increases. This signals a reduction in the quality of nesting upon applying pressure, therefore inducing a lesser impact of the CDW condensate on the electronic properties of LaTe{sub 2}. The consequent suppression of the CDW gap leads to a release of additional charge carriers, manifested by the shift of weight from the gap feature into the metallic component of the optical response. On the contrary, the power-law behavior, seen in the optical conductivity at energies above the gap excitation and indicating a weakly interacting limit within the Tomonaga-Luttinger liquid scenario, seems to be only moderately dependent on pressure.

36 MATERIALS SCIENCE↗

A workflow for automatic generation and efficient refinement of individual pressure-dependent networks

Manual chemical kinetic model construction often requires modelists to at least implicitly guess all possible decay pathways and their relative fluxes for all important species. We present a workflow and associated tool for automatic generation and re finement of pressure-dependent networks that should enable modelists to efficiently and comprehensively identify decay pathways and estimate respective parameters for chemical species. This tool combines the capabilities of the Reaction Mechanism Generator (RMG) software to generate possible reaction paths, determine thermochemistry, approximate rate coefficients and estimate frequencies with the capabilities of the Arkane software to use quantum chemical parameters to compute thermochemistry and pressure dependent rates. A flux-based algorithm is used to decide which isomers to add to the network. Isomers added to the network are reacted to form other channels. When enough of the flux is accounted for by the isomers and bimolecular product channels, the generation process terminates to yield a comprehensive network. Network sensitivity analysis is applied to the network to identify the most important wells and barriers that can be refined using quantum chemistry calculations. Iterative refinement can then be used to achieve accuracy. The comprehensive network can be easily reduced using energy and flux-based algorithms to the most important channels and isomers in the network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Developments in Nickel-Hydrogen Dependent Pressure Vessel (DPV) Cell and Battery Design

THe Dependent Pressure Vessel (DPV) Nickel-Hydrogen (NiH2) design is being developed as an advanced battery for military and commercial, aerospace and terrestrial applications. The DPV cell design offers high specific energy and energy density as well as reduced cost, while retaining the established Individual Pressure Vessel (IPV) technology flight heritage and database. This advanced DPV design also offers a more efficient mechanical, electrical and thermal cell and battery configuration and a reduced part count. The DPV battery design promotes compact, minimum volume packaging and weight efficiency, and delivers cost and weight savings with minimal design risk.

Caldwell, Dwight B.↗

Rapid gas-phase reactions - The reaction of ammonia and the methylamines with boron trifluoride. III - Pressure dependence of rate constant.

A steady-state flow apparatus, shown earlier to be suitable for the study of rapid gas reactions, has been used to determine the pressure dependence of the relative quasi-bimolecular rate constants for the reactant pairs ammonia (AM)-trimethylamine (TMA) and dimethylamine (DMA)-trimethylamine in reaction with boron trifluoride. The pressure dependence of the former was determined in the range 0.03-75 torr and that of the latter in the range 0.02-720 torr.

Glicker, S.↗

Asymptotic analysis of the fluid flow with a pressure-dependent viscosity in a system of thin pipes

We consider the incompressible fluid with a pressure-dependent viscosity flowing through a multiple pipe system. The viscosity–pressure relation is given by the Barus law commonly used in the engineering applications. Assuming that the ratio between pipes thickness and its length is small, we propose a rigorous asymptotic approach based on the concept of the transformed pressure. As a result, we obtain new macroscopic model describing the effective behavior of the fluid in the system. In particular, the generalized version of the Kirchhoff’s law is derived giving the explicit formula for the junction pressure. The error estimate for the asymptotic approximation is also provided. Mathematical analysis presented here can be applied to a general viscosity–pressure relation satisfied by other empiric laws.

97 MATHEMATICS AND COMPUTING↗

Measurement of the Energy and High-Pressure Dependence of X-ray-Induced Decomposition of Crystalline Strontium Oxalate

We report measurements of the X-ray-induced decomposition of crystalline strontium oxalate (SrC2O4) as a function of energy and high pressure in two separate experiments. SrC2O4 at ambient conditions was irradiated with monochromatic synchrotron X-rays ranging in energy from 15 to 28 keV. A broad resonance of the decomposition yield was observed with a clear maximum when irradiating with ~20 keV X-rays and ambient pressure. Little or no decomposition was observed at 15 keV, which is below the Sr K-shell energy of 16.12 keV, suggesting that excitation of core electrons may play an important role in the destabilization of the C2O42– anion. A second experiment was performed to investigate the high-pressure dependence of the X-ray-induced decomposition of strontium oxalate at fixed energy. SrC2O4 was compressed in a diamond anvil cell (DAC) in the pressure range from 0 to 7.6 GPa with 1 GPa increments and irradiated in situ with 20 keV X-rays. A marked pressure dependence of the decomposition yield of SrC2O4 was observed with a decomposition yield maximum at around 1 GPa, suggesting that different crystal structures of the material play an important role in the decomposition process. This may be due in part to a phase transition observed near this pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-dependent kinetics of cyclopentene consumption

Recent experiments have uncovered deficiencies in the ability of current kinetic models for cyclopentane combustion to predict species profiles as a function of O2 concentration. One likely source of these discrepancies flows from the limited availability of relevant kinetic data for key functionalized intermediates, requiring the use of distant analogies to estimate their rates. This work fills this gap for cyclopentene, the most prominent C5 intermediate in low-temperature cyclopentane combustion. Ab initio transition-state-theory based master equation methods are used to calculate pressure-dependent rate constants across four potential energy surfaces (C5H8 + OH, C5H8 + HO2, C5H7, and C5H7 + O2). Potential energy surfaces are characterized at the CCSD(T)-F12/cc-pVDZ-F12//revDSD-PBEP86-D3BJ/def2-TZVPP level of theory. Pressure-dependent rate constants and branching fractions are determined via 1D master equation calculations. The results are used to analyze the competition for radicals between cyclopentene and cyclopentane in the intermediate temperature region, and to identify the dominant pathways flowing from these initiation channels. On the OH initiation surface, we find good agreement with recently published experimental rate constants at high temperature, and we elucidate the complex temperature dependence below 800 K, where 𝜋𝜋 addition becomes prominent. On the HO2 initiation surface, we find an interesting alternative route to bicyclic ether formation via well-skipping over the HO2 adduct well. On the cyclopentenyl radical surface, the major product is cyclopentadiene plus H. On the cyclopentenyl + O2 surface, we find that resonance stabilization largely prevents the allylic radical from undergoing oxidation, whereas the alkylic radical has a somewhat elevated propensity for oxidation pathways relative to cyclopentyl.

ab initio calculations↗

Rietveld refinement study of the pressure dependence of the internal structural parameter u in the wurtzite phase of ZnO

The pressure dependence of the internal structural parameter u of the wurtzite phase of ZnO was studied using high resolution angular dispersive x-ray diffraction up to 12 GPa in a helium pressure medium. The u parameter increases with pressure up to about 0.430 at about 5.6 GPa, and then rapidly decrease to about 0.380 during the phase transition. Two models of the phase transition path were proposed recently by first-principles calculations [A. M. Saitta and F. Decremps, Phys. Rev. B 70, 035214 (2004); S. Limpijumnong and S. Jungthawan, Phys. Rev. B 70, 054104 (2004)]. These possible mechanisms responsible for the wurtzite-to-rocksalt phase transition under high pressure are experimentally evaluated based on our results. The bulk moduli of the wurtzite and rocksalt phase at zero pressure were estimated as 135.3 {+-} 1.8 and 177.4 {+-} 4.6 GPa, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural phase diagram for ultra-thin epitaxial Fe 3 O 4 / MgO(0 01) films: thickness and oxygen pressure dependence

A systematic investigation of the thickness and oxygen pressure dependence for the structural properties of ultra-thin epitaxial magnetite (Fe 3 O 4 ) films has been carried out; for such films, the structural properties generally differ from those for the bulk when the thickness ≤10 nm. Iron oxide ultra-thin films with thicknesses varying from 3 nm to 20 nm were grown on MgO (001) substrates using molecular beam epitaxy under different oxygen pressures ranging from 1 × 10 -7 torr to 1 × 10 -5 torr. The crystallographic and electronic structures of the films were characterized using low energy electron diffraction (LEED) and x-ray photoemission spectroscopy (XPS), respectively. Moreover, the quality of the epitaxial Fe 3 O 4 ultra-thin films was judged by magnetic measurements of the Verwey transition, along with complementary XPS spectra. We observed that under the same growth conditions the stoichiometry of ultra-thin films under 10 nm transforms from the Fe 3 O 4 phase to the FeO phase. In this work, a phase diagram based on thickness and oxygen pressure has been constructed to explain the structural phase transformation. It was found that high-quality magnetite films with thicknesses ≤20 nm formed within a narrow range of oxygen pressure. An optimal and controlled growth process is a crucial requirement for the accurate study of the magnetic and electronic properties for ultra-thin Fe 3 O 4 films. Furthermore, these results are significant because they may indicate a general trend in the growth of other oxide films, which has not been previously observed or considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure dependent diffraction and spectroscopy of a dimerized antiferromagnet

We present pressure dependent neutron diffraction and inelastic neutron scattering measurements of the dimerized antiferromagnet Ba$_3$Mn$_2$O$_8$. The room temperature diffraction measurements reveal a linear decrease in lattice constant as a function of applied pressure. No structural transitions are observed. The low-temperature neutron spectroscopy measurements indicate a small change in magnetic scattering intensity in the vicinity of the spin gap for pressures up to $P=0.6$~kbar.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗