Engineering PapersSearch

SEARCH · Engineering Papers

Results for “POWER SERIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

A 25-kW Series-Resonant Power Converter

Prototype exhibited efficiency of 93.9 percent. 25-kW resonant dc/dc power converter designed, developed, fabricated, and tested, using Westinghouse D7ST transistors as high-power switches. D7ST transistor characterized for use as switch in series-resonant converters, and refined base-drive circuit developed. Technical base includes advanced switching magnetic, and filter components, mathematical circuit models, control philosophies, and switch-drive strategies. Power-system benefits such as lower losses when used for high-voltage distribution, and reduced magnetics and filter mass realized.

Frye, R. J.

Flexure-torsion behavior of sheat-deformable beams with applications to aircraft wing sections

The flexure-torsion behavior of a tip-loaded cantilever beam with an arbitrary cross-section is studied using Saint-Venant's semi-inverse method along with a power series solution for the out-of-plane flexure and torsion warping functions. The power series coefficients are determined by solving a set of variationally derived linear algebraic equations. For complex cross-sections, the calculated coefficients represent a 'best-fit approximation' to the exact warping function. The resulting warping functions are used to determine the cross-section properties including: the torsion constant, shear deformation coefficients, shear correction factors, and the shear center location. A new linear relation is developed for locating the shear center using the Saint-Venant flexure and torsion solutions, where the twist rate is zero about the line of shear centers (not the centroidal axis). Numerical results are presented for a triangular cross-section and different NACA airfoils.

Kosmatka, J. B.

Tests of a simple data merging algorithm for the GONG project

The GONG (Global Oscillation Network Group) project proposes to reduce the impact of diurnal variations on helioseismic measurements by making long-term observations of solar images from six sites placed around the globe. The sun will be observed nearly constantly for three years, resulting in the acquisition of l+ terabyte of image data. To use the solar network to maximum advantage, the images from the sites must be combined into a single time series to determine mode frequencies, amplitudes, and line widths. Initial versions of combined, i.e., merged, time series were made using a simple weighted average of data from different sites taken simultaneously. In order to accurately assess the impact of the data merge on the helioseismic measurements, a set of artificial solar disk images was made using a standard solar model and containing a well known set of oscillation modes and frequencies. This undegraded data set and data products computed from it were used to judge the relative merits of various data merging schemes. The artificial solar disk images were subjected to various instrumental and atmospheric degradations, dependent on site and time, in order to create a set of images simulating those likely to be taken at the site. The degraded artificial solar disk images for the six observing sites were combined in various ways to form merged time series of images and mode coefficients. Various forms of a weighted average were used, including an equally-weighted average, an average with weights dependent upon air mass and averages with weights dependent on various quality assurance parameters. Both the undegraded solar disk image time series and several time series made up of various combinations of the degraded solar disk images from the six sites were subjected to standard helioseismic measurement processing. This processing consisted of coordinate remapping, detrending, spherical harmonic transformation, computation of power series for the oscillation mode coefficients, and mode frequency identification. Visual and statistical evaluation of the merged data sets themselves and differences between the merged and undegraded data set shows good agreement between the two data sets. Some slight differences in image scale and registration appear between the undegraded data set and the various merged data sets. In the set of power series made from the mode coefficients of the merged data sets, some power leakage is observed into the background and into slightly lower l-value modes, especially at higher l-value mode frequencies. The results of the comparison of time series and mode oscillation frequencies of the undegraded data with those of the data merged using weighted averages indicate that, at least for p-mode solar oscillations, a weighted average of either the detrended remapped images or the mode coefficients gives good determination of the mode frequencies and adequate-to-good determination of the amplitudes and widths of the mode frequency lines. This conclusion is most advantageous to the analysis of the massive amounts of data to be received by the GONG network.

Williams, W. E.

Some Solutions for the Large Deflections of Uniformly Loaded Circular Membranes

Inconsistent citations in the literature and questions about convergence prompt reexamination of Hencky's classic solution for the large deflections of a clamped, circular isotropic membrane under uniform pressure. This classic solution is observed actually to be for uniform lateral loading because the radial component of the pressure acting on the deformed membrane is neglected. An algebraic error in Hencky's solution is corrected, additional terms are retained in the power series to assess convergence, and results are obtained for two additional values of Poisson's ratio. To evaluate the importance of the neglected radial component of the applied pressure, the problem is reformulated with this component included and is solved, with escalating algebraic complexity, by a similar power-series approach. The two solutions agree quite closely for lightly loaded membranes and diverge slowly as the load intensifies. Differences in maximum stresses and deflections are substantial only when stresses are very high. The more nearly spherical deflection shape of the membrane under true pressure loading suggests that a near-parabolic membrane reflector designed on the basis of the more convenient Hencky theory would not perform as well as expected. In addition, both theories are found to yield closed-form, nonuniform membrane-thickness distributions that produce parabolic middle-surface deflections under loading. Both distributions require that the circular boundary expand radially in amounts that depend on material and loading parameters.

Fichter, W. B.

Application of linear response theory to experimental data of simultaneous radiation and annealing response of a CMOS device

Results from the application of linear response theory are compared to experimental data from simultaneous radiation and annealing response of a CMOS device. In particular, a method is applied which was developed earlier to determine the characteristic time, t(0), as well as the parameters A and C in the 1n(t) dependence of the linear response function R(t) = -C + A1n(1-t/t(0)). The method is based on a study of the linear response for t being much less than t(0), when R(t) can be expanded in a power series of t: R(t) = R(0) + R'(0)t + 1/2R''(0)t-squared + 1/3R'''(0)t-cubed + ..., where R'(0) and R''(0) are, respectively, the first and second derivatives of R with respect to t. To find the linear response, R(t-t') is substituted in the form of this power series equation into a general equation for the shift of the threshold potential. To test the method, irradiation experiments were conducted on RCA 10(6) rad-hard CMOS IC's. A dose rate of approximately 130 rads/min was used. An IC was irradiated with Co-60 gamma rays for several hours, taking measurements of the threshold potential for one n-channel and one p-channel transistor every ten minutes. For the p-channel transistor, t(0) was found to be approximately 110 min and for the n-channel, t(0) was approximately 70 min. For the p-channel, the theoretical curve deviates from the experimental points only after 70 min; for the n-channel, the deviation takes place after 45 min. Additional findings are discussed and the application of the method to pure annealing is described.

Litovchenko, V.

Free-Vibration Analysis of Rotating Beams by a Variable-Order Finite-Element Method

The free vibration of rotating beams is analyzed by means of a finite-element method of variable order. This method entails displacement functions that are a complete power series of a variable number of terms. The terms are arranged so that the generalized coordinates are composed of displacements and slopes at the element extremities and, additionally, displacements at certain points within the element. The displacement is assumed to be analytic within an element and thus can be approximated to any degree of accuracy desired by a complete power series. Numerical results are presented for uniform beams with zero and nonzero hub radii, tapered beams, and a nonuniform beam with discontinuities. Since the present method reduces to a conventional beam finite-element method for a cubic displacement function, the results are compared and found to be superior to the conventional results in terms of accuracy for a given number of degrees of freedom. Indeed, essentially exact eigenvalues and eigenvectors are obtained with this technique, which is far more rapidly convergent than other approaches in the literature.

Hodges, Dewey H.

Optical interferometry of inhomogeneous gases.

One-dimensional refractive index distribution using power series expansions for refractive index and ray traces obtained from relation of inhomogeneities and interference pattern of Mach- Zehnder interferometer

MACH-ZEHNDER INTERFEROMETER

SDA: a symbolic differential algebra package in C++

Truncated Power Series Algebra (TPSA), or Differential Algebra (DA), is a well-established tool in accelerator physics, commonly used for generating high-order maps of dynamic systems, as well as in symplectic tracking, normal form analysis, verified integration, optimization, and fast multipole methods. This package is the first to perform symbolic DA computations, enabling traceability of initial condition contributions and runtime reduction for repeated DA calculations, potentially expanding DA’s applications.

97 MATHEMATICS AND COMPUTING

Asymptotic theory of a slender rotating beam with end masses.

The method of matched asymptotic expansions is employed to solve the singular perturbation problem of the vibrations of a rotating beam of small flexural rigidity with concentrated end masses. The problem is complicated by the appearance of the eigenvalue in the boundary conditions. Eigenfunctions and eigenvalues are developed as power series in the perturbation parameter beta to the 1/2 power, and results are given for mode shapes and eigenvalues through terms of the order of beta.

Whitman, A. M.

Maintaining Stability During a Conducted-Ripple EMC Test

An improved technique, and electronic circuitry to implement the technique, have been developed for a military-standard electromagnetic-compatibility (EMC) test in which one analyzes susceptibility to low-frequency ripple conducted into the equipment under test via a DC power line. In the traditional technique for performing the particular test, the ripple is coupled onto the DC power line via a transformer. Depending upon some design details of the equipment under test, the inductance of the transformer can contribute a degree of instability that results in an oscillation of amplitude large enough to destroy the equipment. It is usually possible to suppress the oscillation by connecting a damping resistor to the primary terminals of the ripple-injection transformer. However, it is important to emphasize the usually in the preceding sentence: sometimes, the resistive damping becomes insufficient to suppress destructive oscillation. In addition, undesirably, the resistor contributes to power dissipation and power demand, and thereby also necessitates the use of a larger ripple voltage amplifier. Yet another disadvantage of the transformer-coupling technique is that the transformer introduces low-frequency distortion of the injected ripple voltage. The improved technique makes it possible to inject ripple with very low distortion at low frequency, without inducing oscillation. In this technique, a transformer is not used: Instead, power is fed to the equipment under test via series power field-effect transistors (FETs) controlled by a summing operational amplifier. One of the inputs to the amplifier controls the DC component of the power-line voltage; the other input, generated by an external oscillator, controls the ripple component. The circuitry for implementing this technique includes panel displays, an internal power supply for the operational amplifier and panel displays, and amplitude controls for the DC and ripple powerline voltage components.

Vorperian, Vatche

Radar altimeter mean return wave forms from near-normal-incidence ocean surface scattering

For a nearly Gaussian transmitted pulse shape scattered from a nearly Gaussian distributed sea surface, a small argument series expansion of one term lead to a several term power series expression for the mean return waveform. Specific expressions are given for the first four terms. These results, which require less computer time than numerical convolution, are useful for data analysis from current or past radar altimeters and for design studies of future systems. Several representative results are presented for an idealized Seasat-1 radar altimeter.

Hayne, G. S.

Numerical comparisons of nonlinear convergence accelerators

As part of a continuing program of numerical tests of convergence accelerators, the iterated Aitken's Delta-squared method, Wynn's epsilon algorithm, Brezinski's theta algorithm, and Levin's u transform are compared on a broad range of test problems: linearly convergence alternating, monotone, and irregular-sign series, logarithmically convergent series, power method and Bernoulli method sequences, alternating and monotone asymptotic series, and some perturbation series arising in applications. In each category either the epsilon algorithm or the u transform gives the best results of the four methods tested. In some cases differences among methods are slight, and in others they are quite striking.

Smith, D. A.