Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POPULATION DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Rapid evaluation of ion thruster lifetime using optical emission spectroscopy

A major life-limiting phenomenon of electric thrusters is the sputter erosion of discharge chamber components. Thrusters for space propulsion are required to operate for extended periods of time, usually in excess of 10,000 hr. Lengthy and very costly life-tests in high-vacuum facilities have been required in the past to determine the erosion rates of thruster components. Alternative methods for determining erosion rates which can be performed in relatively short periods of time at considerably lower costs are studied. An attempt to relate optical emission intensity from an ion bombarded surface (screen grid) to the sputtering rate of that surface is made. The model used a kinetic steady-state (KSS) approach, balancing the rates of population and depopulation of ten low-lying excited states of the sputtered molybdenum atom (MoI) with those of the ground state to relate the spectral intensities of the various transitions of the MoI to the population densities. Once this is accomplished, the population density can be related to the sputting rate of the target. Radiative and collisional modes of excitation and decay are considered. Since actual data has not been published for MoI excitation rate and decay constants, semiempirical equations are used. The calculated sputtering rate and intensity is compared to the measured intensity and sputtering rates of the 8 and 30 cm ion thrusters.

Rock, B. A.↗

E-waste collection in Italy: Results from an exploratory analysis

Highlights: • The performance of the Italian household collection system for E-waste is analysed in a panel data regression analysis. • N. of Collection points, % of female, % of waste separately collected are positively correlated with kg of E-waste collected. • Population density is negatively correlated with kg of E-waste collected. • The Stochastic Frontier Model identifies the optimal production function. • Tuscany, Sardinia and Sicily are the best performing regions. - Abstract: This study looks at the performance of household electrical and electronic waste (WEEE) collection in 20 Italian regions from 2008 to 2015. The impact of several explicative variables on the results of e-waste collection is evaluated. The independent variables are socio-economic and demographic ones (age, gender, household size, education level, migration and income) along with technical-organisational variables (population density, presence of metropoles, macro regions, characteristics of the territory, percentage of household waste collected separately and number of e-waste collection points). The results show that the presence of collection points, the percentage of household waste collected separately and the percentage of females are positively correlated with the kg collected per inhabitant per year. For example, a variation of 1% of input (presence of collection points) corresponds to a 0.25% variation in the output (collection results) while 1% difference in the percentage of females in the population corresponds to a 7.549% difference in the collection rate. Population density, instead, is negatively correlated. It is interesting to note that there is a discrepancy between the Southern regions and the Centre regions (the former have an outcome 0.66 times lower than the latter) while the Northern regions perform similarly to the Centre ones. Moreover, the first year (2008) had a very low performance compared to the following years when the scheme constantly improved, mainly due to the additional collection points available. The Stochastic Frontier Model allows for the identification of the optimal production function among the 20 Italian regions. The best performing region is Tuscany (in the Centre), followed by Sardinia and Sicily (in the South).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Population as a proxy for infrastructure in the determination of event response and recovery resource allocations

Research into modeling of the quantification and prioritization of resources used in the recovery of lifeline critical infrastructure following disruptive incidents, such as hurricanes and earthquakes, has shown several factors to be important. Among these are population density and infrastructure density, event effects on infrastructure, and existence of an emergency response plan. The social sciences literature has a long history of correlating the population density and infrastructure density at a national scale, at a country-to-country level, mainly focused on transportation networks. This effort examines whether these correlations can be repeated at smaller geographic scales, for a variety of infrastructure types, so as to be able to use population data as a proxy for infrastructure data where infrastructure data is either incomplete or insufficiently granular. Using the best data available, this effort shows that strong correlations between infrastructure density for multiple types of infrastructure (e.g. miles of roads, hospital beds, miles of electric power transmission lines, and number of petroleum terminals) and population density do exist at known geographic boundaries (e.g. counties, service area boundaries) with exceptions that are explainable within the social sciences literature. Furthermore, the correlations identified provide a useful basis for ongoing research into the larger resource utilization problem.

58 GEOSCIENCES↗

Territory and Population Attributes Affect Florida Scrub-Jay Fecundity in Fire Adapted Ecosystems

Fecundity, the number of young produced by a breeding pair during a breeding season, is a primary component in evolutionary and ecological theory and applications. Fecundity can be influenced by many environmental factors and requires long-term study due to the range of variation in ecosystem dynamics. Fecundity data often include a large proportion of zeros when many pairs fail to produce any young during a breeding season due to nest failure or when all young die independently after fledging. We conducted color banding and monthly censuses of Florida scrub-jays (Aphelocoma coerulescens) across 31 years, 15 populations, and 761 territories along central Florida’s Atlantic coast. We quantified how fecundity (juveniles/pair-year) was influenced by habitat quality, presence/absence of nonbreeders, population density, breeder experience, and rainfall, with a zero-inflated Bayesian hierarchical model including both a Bernoulli (e.g., brood success) and a Poisson (counts of young) submodel, and random effects for year, population, and territory. The results identified the importance of increasing “strong” quality habitat, which was a mid-successional state related to fire frequency and extent, because strong territories, and the proportion of strong territories in the overall population, influenced fecundity of breeding pairs. Populations subject to supplementary feeding also had greater fecundity. Territory size, population density, breeder experience, and rainfall surprisingly had no or small effects. Different mechanisms appeared to cause annual variation in fecundity, as estimates of random effects were not correlated between the success and count submodels. The increased fecundity for pairs with nonbreeders, compared to pairs without, identified empirical research needed to understand how the proportion of low-quality habitats influences population recovery and sustainability, because dispersal into low-quality habitats can drain nonbreeders from strong territories and decrease overall fecundity. We also describe how long term study resulted in reversals in our understanding because of complications involving habitat quality, sociobiology, and population density.

Long-term studies↗

Male body size predicts reproductive success but not within-clutch paternity patterns in gopher tortoises ( Gopherus polyphemus )

In many vertebrates, body size is an important driver of variation in male reproductive success. Larger, more fit individuals are more likely to dominate mating opportunities, skewing siring success and resulting in lower effective population sizes and genetic diversity. The mating system of the gopher tortoise (Gopherus polyphemus) has been characterized as both female defense and scramble-competition polygyny. Mating systems are typically not fixed and can be influenced by factors such as population density, demographic structure, and environmental conditions;, however, most populations will have a predominant strategy that results from local conditions. We assessed how male body size influences patterns of paternity and reproductive success in a natural population of gopher tortoises in Florida, USA. Using microsatellites, we assigned parentage of 220 hatchlings from 31 nests collected during two reproductive seasons. Larger males were significantly more likely to sire offspring and sired more offspring than smaller males; however, the likelihood of a clutch being multiply-sired was unrelated to male body size. We also found evidence of mate fidelity across years. Although paternity patterns in this high-density population are more consistent with defense polygyny, female monopoly by males was incomplete, with both large and small males contributing to multiply-sired clutches. Additional behavioral data are needed to clarify the role of female mate selection in paternity outcomes. The context-dependence of mating systems underscores the need to compare parentage patterns across populations and to recognize the potential for more than one strategy to be employed within a single population.

59 BASIC BIOLOGICAL SCIENCES↗

Scaling mercury biodynamics from individuals to populations: Implications of an herbivorous fish on mercury cycles in streams

Mercury (Hg) is a widespread environmental pollutant anthropogenically released into aquatic ecosystems where it is tightly retained and cycled through a combination of abiotic and biotic processes. The organic form of Hg, Methylmercury (MeHg), binds to organic carbon chains and efficiently bioaccumulates through aquatic food webs to toxic levels in consumers. For these reasons, understanding the transport and fate of mercury, including the role of organisms in these cycles, is important. The premise of the Somatic Growth Dilution (SGD) concept is that bioaccumulation of contaminants will become more dilute within an organism as it displays higher growth efficiency. While multiple studies have substantiated the effects of SGD on reduced MeHg concentrations at the individual level, the implications of SGD to populations and overall food web dynamics is uncertain. Herein, we examined the influence of SGD on total MeHg standing stock and flux in stoneroller ( Campostoma oligolepis ) populations at five sites in East Fork Poplar Creek (EFPC), a stream contaminated by Hg on the Oak Ridge Reservation. We assessed patterns in periphyton and stoneroller MeHg concentrations in relation to relative growth and population density to determine evidence of SGD and density-dependent growth, respectively. We then calibrated a biodynamic model relating MeHg concentration in stonerollers to growth rate, assimilation efficiency, uptake, and elimination of MeHg. Using over 30 years of population data, individual biodynamic models were scaled to the population level to analyze the effects of population density and growth on MeHg standing stock (ug m -2 ) in stoneroller populations and flux (ug m -2 d -1 ) from periphyton communities to stonerollers. We found evidence of both density-dependent and “boom-and-bust” growth patterns for stonerollers in EFPC. In congruence with the SGD concept, sites with higher average relative growth had lower MeHg concentrations. However, total MeHg standing stock and flux was strongly related to population density, irrespective of changing growth patterns. Additionally, higher relative growth was positively related to a higher total MeHg flux. However, the implications of growth on the transfer of MeHg in food webs is complicated and dependent upon population size, age structure, and growth-at-age. Our results also suggest that stonerollers may play significant roles in contaminant cycles in EFPC by mobilizing considerable quantities of Hg, storing significant reservoirs of hg and MeHg, and transferring MeHg to higher trophic levels.

59 BASIC BIOLOGICAL SCIENCES↗

Civil applications of high-speed rotorcraft and powered-lift aircraft configurations

Advanced subsonic vertical and short takeoff and landing (V/STOL) aircraft configurations offer new transportation options for civil applications. Described is a range of vehicles from low-disk to high-disk loading aircraft, including high-speed rotorcraft, V/STOL aircraft, and short takeoff and landing (STOL) aircraft. The status and advantages of the various configurations are described. Some of these show promise for relieving congestion in high population-density regions and providing transportation opportunities for low population-density regions.

Albers, James A.↗

Civil applications of high speed rotorcraft and powered lift aircraft configurations

Advanced subsonic vertical and short takeoff and landing (V/STOL) aircraft configurations offer new transportation options for civil applications. Described is a range of vehicles from low-disk to high-disk loading aircraft, including high-speed rotorcraft, V/STOL aircraft, and short takeoff and landing (STOL) aircraft. The status and advantages of the various configurations are described. Some of these show promise for relieving congestion in high population-density regions and providing transportation opportunities for low population-density regions.

Albers, James A.↗

Analysis of the Relationship Between Vehicle Weight/Size and Safety, and Implications for Federal Fuel Economy Regulation

This report analyzes the relationship between vehicle weight, size (wheelbase, track width, and their product, footprint), and safety, for individual vehicle makes and models. Vehicle weight and footprint are correlated with a correlation coefficient (R{sup 2}) of about 0.62. The relationship is stronger for cars (0.69) than for light trucks (0.42); light trucks include minivans, fullsize vans, truck-based SUVs, crossover SUVs, and pickup trucks. The correlation between wheelbase and track width, the components of footprint, is about 0.61 for all light vehicles, 0.62 for cars and 0.48 for light trucks. However, the footprint data used in this analysis does not vary for different versions of the same vehicle model, as curb weight does; the analysis could be improved with more precise data on footprint for different versions of the same vehicle model. Although US fatality risk to drivers (driver fatalities per million registered vehicles) decreases as vehicle footprint increases, there is very little correlation either for all light vehicles (0.01), or cars (0.07) or trucks (0.11). The correlation between footprint and fatality risks cars impose on drivers of other vehicles is also very low (0.01); for trucks the correlation is higher (0.30), with risk to others increasing as truck footprint increases. Fatality risks reported here do not account for differences in annual miles driven, driver age or gender, or crash location by vehicle type or model. It is difficult to account for these factors using data on national fatal crashes because the number of vehicles registered to, for instance, young males in urban areas is not readily available by vehicle type or model. State data on all police-reported crashes can be used to estimate casualty risks that account for miles driven, driver age and gender, and crash location. The number of vehicles involved in a crash can act as a proxy of the number of miles a given vehicle type, or model, is driven per year, and is a preferable unit of exposure to a serious crash than the number of registered vehicles. However, because there are relatively few fatalities in the states providing crash data, we calculate casualty risks, which are the sum of fatalities and serious or incapacitating injuries, per vehicle involved in a crash reported to the police. We can account for driver age/gender and driving location effects by excluding from analysis crashes (and casualties) involving young males and the elderly, and occurring in very rural or very urban counties. Using state data on all police-reported crashes in five states, we find that excluding crashes involving young male and elderly drivers has little effect on casualty risk; however, excluding crashes that occurred in the most rural and most urban counties (based on population density) increases casualty risk for all vehicle types except pickups. This suggests that risks for pickups are overstated unless they account for the population density of the county in which the crashes occur. After removing crashes involving young males and elderly drivers, and those occurring in the most rural and most urban counties, we find that casualty risk in all light-duty vehicles tends to increase with increasing weight or footprint; however, the correlation (R{sup 2}) between casualty risk and vehicle weight is 0.31, while the correlation with footprint is 0.23. These relationships are stronger for cars than for light trucks. The correlation between casualty risk in frontal crashes and light-duty vehicle wheelbase is 0.12, while the correlation between casualty risk in left side crashes and track width is 0.36. We calculated separately the casualty risks vehicles impose on drivers of the other vehicles with which they crash. The correlation between casualty risk imposed by light trucks on drivers of other vehicles and light truck footprint is 0.15, while the correlation with light truck footprint is 0.33; risk imposed on others increases as light truck weight or footprint increases. Our analysis indicates that, after excluding crashes involving young male and elderly drivers, and crashes in very rural and very urban counties, and accounting for vehicle weight and footprint, sports cars, pickup trucks and truck-based SUVs have higher risk to their drivers than cars, while import luxury cars and crossover SUVs have lower risk to their drivers than cars. Similarly, pickups and sports cars impose a large casualty risk on drivers of other vehicles, after accounting for vehicle weight and footprint. Our analysis suggests that excluding young male and elderly drivers, and crashes in very rural and urban counties, accounting for vehicle weight, footprint, and type explains only about half of the variability in casualty risk to drivers, and to drivers of other vehicles, by vehicle model.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cities, traffic, and CO 2 : A multidecadal assessment of trends, drivers, and scaling relationships

Emissions of CO 2 from road vehicles were 1.57 billion metric tons in 2012, accounting for 28% of US fossil fuel CO 2 emissions, but the spatial distributions of these emissions are highly uncertain. We develop a new emissions inventory, the Database of Road Transportation Emissions (DARTE), which estimates CO 2 emitted by US road transport at a resolution of 1 km annually for 1980-2012. DARTE reveals that urban areas are responsible for 80% of on-road emissions growth since 1980 and for 63% of total 2012 emissions. We observe nonlinearities between CO 2 emissions and population density at broad spatial/temporal scales, with total on-road CO 2 increasing nonlinearly with population density, rapidly up to 1,650 persons per square kilometer and slowly thereafter. Per capita emissions decline as density rises, but at markedly varying rates depending on existing densities. Here, we make use of DARTE's bottom-up construction to highlight the biases associated with the common practice of using population as a linear proxy for disaggregating national- or state-scale emissions. Comparing DARTE with existing downscaled inventories, we find biases of 100% or more in the spatial distribution of urban and rural emissions, largely driven by mismatches between inventory downscaling proxies and the actual spatial patterns of vehicle activity at urban scales. Here, given cities' dual importance as sources of CO 2 and an emerging nexus of climate mitigation initiatives, high-resolution estimates such as DARTE are critical both for accurately quantifying surface carbon fluxes and for verifying the effectiveness of emissions mitigation efforts at urban scales.

54 ENVIRONMENTAL SCIENCES↗

Dynamics of an Increasing Lake Trout Population in Lake Pend Oreille, Idaho

Abstract To quantify movement and abundance of lake trout Salvelinus namaycush in Lake Pend Oreille, Idaho, large trap nets were fished during two periods (30 September 2003–31 March 2004 and 10 September–15 December 2005) and gill nets were fished from 12 February to 6 April 2006. Trap-net catch rates and recapture rates of previously marked lake trout suggested that sampling locations along the eastern shore were associated with either lake trout foraging or spawning aggregations in both years. Abundance of mostly mature lake trout that were vulnerable to trap-netting in autumn increased from 6,000 in 2003 to 11,000 in 2005, whereas total abundance of immature and mature lake trout increased from 12,000 in 2003 (based on trap-net size selectivity) to 36,000 in 2005 (based on gill-net recaptures). The increase in abundance of all immature and mature lake trout estimated by mark–recapture in 1999, 2003, and 2005 was well described by an exponential growth model (intrinsic rate of population change r = 0.490; annual rate of population change λ = 1.631), which indicated that the population would double every 1.4 years and would reach nearly 400,000 fish by 2010 if carrying capacity was not reached sooner. Based on population densities observed elsewhere within the species' range, an abundance of 400,000 lake trout is possible, but population density at carrying capacity is probably lower in very deep lakes like Lake Pend Oreille, where much of the area is too deep for lake trout. During 2006, suppression of the lake trout population through gillnetting, trap-netting, and angling was reflected by an exploitation rate of 44% (30–63%) and a total annual mortality rate of 58% (39–82%), well above the sustainable threshold mortality rate of 50%. We recommend the use of population modeling to evaluate the success of ongoing lake trout suppression efforts in Lake Pend Oreille.

Hansen, Michael J.↗

Quantifying and Understanding the Access Time to Dockless Micromobility: A Case Study in Washington, D.C.

Micromobility has been widely deployed in many cities. Similar as how access time/distance affects the travel demand to use public transit and informs transit system design, access time/distance to micromobility service measures its service efficiency and also serves as an equity indicator to inform city agencies from a regulation perspective. Though there is an increasing need to understand it, access to micromobility has not been sufficiently studied. This paper developed a framework to quantity the access time to dockless micromobility service (i.e., the minimum time needed to walk to reach the closest dockless micromobility vehicles). Based on the real-time vehicle location data collected from Washington, DC, this research quantified the access time to dockless micromobility, analyzed its spatial and temporal variation patterns and investigated its relationship with socio-demographic variables (i.e., population density, employment density and low-income population). The results revealed that the access time to dockless micromobility ranges between 0 to 4 minutes with the most frequently observed range of 0.5 to 1 minutes, and the city center area tends to have shorter access time than the outskirts areas. Results also indicate a quite stable access time level in DC with access time standard deviation of 0.2 to 0.5 minutes. After correlating the access time at census-block-group level with socio-demographic data, it was discovered that shorter access time usually aligns with larger population and employment density, and the proportion of low-income population was found not helpful with explaining the access time variation, which indicating a relatively equitable micromobility program.

access time↗

Lawrence Livermore National Laboratory Emergency Response Capability Baseline Needs Assessment Requirement Document

This revision of the LLNL Fire Protection Baseline Needs Assessment (BNA) was prepared by John A. Sharry, LLNL Fire Marshal and LLNL Division Leader for Fire Protection and reviewed by Martin Gresho, Sandia/CA Fire Marshal. The document follows and expands upon the format and contents of the DOE Model Fire Protection Baseline Capabilities Assessment document contained on the DOE Fire Protection Web Site, but only address emergency response. The original LLNL BNA was created on April 23, 1997 as a means of collecting all requirements concerning emergency response capabilities at LLNL (including response to emergencies at Sandia/CA) into one BNA document. The original BNA documented the basis for emergency response, emergency personnel staffing, and emergency response equipment over the years. The BNA has been updated and reissued five times since in 1998, 1999, 2000, 2002, and 2004. A significant format change was performed in the 2004 update of the BNA in that it was 'zero based.' Starting with the requirement documents, the 2004 BNA evaluated the requirements, and determined minimum needs without regard to previous evaluations. This 2010 update maintains the same basic format and requirements as the 2004 BNA. In this 2010 BNA, as in the previous BNA, the document has been intentionally divided into two separate documents - the needs assessment (1) and the compliance assessment (2). The needs assessment will be referred to as the BNA and the compliance assessment will be referred to as the BNA Compliance Assessment. The primary driver for separation is that the needs assessment identifies the detailed applicable regulations (primarily NFPA Standards) for emergency response capabilities based on the hazards present at LLNL and Sandia/CA and the geographical location of the facilities. The needs assessment also identifies areas where the modification of the requirements in the applicable NFPA standards is appropriate, due to the improved fire protection provided, the remote location and low population density of some the facilities. As such, the needs assessment contains equivalencies to the applicable requirements. The compliance assessment contains no such equivalencies and simply assesses the existing emergency response resources to the requirements of the BNA and can be updated as compliance changes independent of the BNA update schedule. There are numerous NFPA codes and standards and other requirements and guidance documents that address the subject of emergency response. These requirements documents are not always well coordinated and may contain duplicative or conflicting requirements or even coverage gaps. Left unaddressed, this regulatory situation results in frequent interpretation of requirements documents. Different interpretations can then lead to inconsistent implementation. This BNA addresses this situation by compiling applicable requirements from all identified sources (see Section 5) and analyzing them collectively to address conflict and overlap as applicable to the hazards presented by the LLNL and Sandia/CA sites (see Section 7). The BNA also generates requirements when needed to fill any identified gaps in regulatory coverage. Finally, the BNA produces a customized simple set of requirements, appropriate for the DOE protection goals, such as those defined in DOE O 420.1B, the hazard level, the population density, the topography, and the site layout at LLNL and Sandia/CA that will be used as the baseline requirements set - the 'baseline needs' - for emergency response at LLNL and Sandia/CA. A template approach is utilized to accomplish this evaluation for each of the nine topical areas that comprise the baseline needs for emergency response. The basis for conclusions reached in determining the baseline needs for each of the topical areas is presented in Sections 7.1 through 7.9. This BNA identifies only mandatory requirements and establishes the minimum performance criteria. The minimum performance criteria may not be the level of performance desired Lawrence Livermore National Laboratory or Sandia/CA. Performance at levels greater than those established by this document will provide a higher level of fire safety, fire protection, or loss control and is encouraged. In Section 7, Determination of Baseline Needs, a standard template was used to describe the process used that involves separating basic emergency response needs into nine separate services. Each service being evaluated contains a determination of minimum requirements, an analysis of the requirements, a statement of minimum performance, and finally a summary of the minimum performance. The requirement documents, listed in Section 5, are those laws, regulations, DOE Directives, contractual obligations, or LLNL policies that establish service levels. The determination of minimum requirements section explains the rationale or method used to determine the minimum requirements.

99 GENERAL AND MISCELLANEOUS↗

Global distribution of seamounts from Seasat profiles

A new measurement techique based on a model of a Gaussian seamount loading a thin elastic lithosphere was developed to analyze seamounts that, until then, were not surveyed or seamounts with poor bathymetric coverage. The model predicts that the seamount diameter is equal to the peak-to-trough distance along the vertical deflection profile and that the flexural diameter of a seamount is related to the age of the lithosphere when the seamount formed. This model also suggests that these two measurements are relatively insensitive to the cross-track location from the seamount. These model predictions were confirmed using Seasat altimeter profiles crossing 14 surveyed seamounts in the Pacific. The analysis of the seamount distribution indicated considerable variations in population density and type across the oceans. Most notable among them are the absence of seamounts in the Atlantic, variations in population density across large fracture zones in the Pacific, and the prevalence of small signatures in the Indian Ocean.

Craig, Claire H.↗

Climate change as an incentive for future human migration

Human migration is both motivated and constrained by a multitude of socioeconomic and environmental factors, including climate-related factors. Climatic factors exert an influence on local and regional population density. Here, we examine the implications of future motivation for humans to migrate by analyzing today's relationships between climatic factors and population density, with all other factors held constant. Such “all other factors held constant” analyses are unlikely to make quantitatively accurate predictions, but the order of magnitude and spatial pattern that come out of such an analysis can be useful when considering the influence of climate change on the possible scale and pattern of future incentives to migrate. Our results indicate that, within decades, climate change may provide hundreds of millions of people with additional incentive to migrate, largely from warm tropical and subtropical countries to cooler temperate countries, with India being the country with the greatest number of people with additional incentive to migrate. These climate-driven incentives would be among the broader constellation of incentives that influence migration decisions. Areas with the highest projected population growth rates tend to be areas that are likely to be most adversely affected by climate change.

54 ENVIRONMENTAL SCIENCES↗

Searching for Dwarf H$α$ Emission-line Galaxies within Voids. I. Survey Methods and First Observations

The population density of dwarf galaxies in low-density voids is likely determined by the dark matter halo mass function and how galaxy formation proceeds in smaller halos. This depends on the nature of dark matter itself, making the dwarf galaxy population a tracer of its properties. While dwarfs have been found in smaller, closer voids, they have proven difficult to find in larger, more distant voids through magnitude-limited spectroscopic surveys. This is because these surveys detect an overwhelmingly large number of objects behind the voids that must be verified spectroscopically, making void surveys prohibitively inefficient and expensive in terms of large-telescope time. Narrowband imaging for emission lines such as Hα reduces the number of background objects, although the overall number remains large. If imaging is done through a filter set with overlapping transmission wings, then object redshift can be estimated from photometry alone. The precision possible is an order of magnitude greater than single-band photometry, with the caveat that the captured line must be identified through other means. Broadband photometry can be used to reject enough objects with emission of an unwanted type to make obtaining spectra of the remaining objects feasible. In this study, we present an Hα survey for dwarf galaxies with M r ' fainter than -14 mag through the center 4.3 square degrees of the void FN8. Using Sloan $g^{\prime} ,r^{\prime} ,i^{\prime}$ photometry, we exclude enough [O II ] and [O III ] emitters that follow-up spectra of only a few dozen objects are required to statistically estimate the void population density.

79 ASTRONOMY AND ASTROPHYSICS↗

Air Pollution Scenario over Pakistan: Characterization and Ranking of Extremely Polluted Cities using Long-Term Concentrations of Aerosols and Trace Gases

Pakistan ranks third in the world in terms of mortality attributable to air pollution, with aerosol mass concentrations (PM2.5) consistently well above WHO (World Health Organization) air quality guidelines (AQG). However, regulation is dependent on a sparse network of air quality monitoring stations and insufficient ground data. This study utilizes long-term observations of aerosols and trace gases to characterize and rank the air pollution scenarios and pollution characteristics of 80 selected cities in Pakistan. Datasets used include (1) the Aqua and Terra (AquaTerra) MODIS (Moderate Resolution Imaging Spectroradiometer) Level 2 Collection 6.1 merged Dark Target and Deep Blue (DTB) aerosol optical depth (AOD) retrieval products; (2) the CAMS (Copernicus Atmosphere Monitoring Service) reanalysis PM1, PM2.5, and PM10 data; (3) the MERRA-2 (Modern-Era Retrospective analysis for Research and Applications, Version 2) reanalysis PM2.5 data, (4) the OMI (Ozone Monitoring Instrument) tropospheric vertical column density (TVCD) of nitrogen dioxide (NO2), and VCD of sulfur dioxide (SO2) in the Planetary Boundary Layer (PBL), (5) the VIIRS (Visible Infrared Imaging Radiometer Suite) Nighttime Lights data, (6) MODIS Collection 6 Version 2 global monthly fire location data (MCD14ML), (7) population density, (8) MODIS Level 3 Collection 6 land cover types, (9) AERONET (AErosol RObotic NETwork) Version 3 Level 2.0 data, and (10) ground-based PM2.5 concentrations from air quality monitoring stations. Potential Source Contribution Function (PSCF) analyses were performed by integrating with ground-based PM2.5 concentrations and the NOAA (National Oceanic and Atmospheric Administration) HYSPLIT (Hybrid Single-Particle Lagrangian Integrated Trajectory) air parcel back trajectories to identify potential pollution source areas which are responsible for extreme air pollution in Pakistan. Results show that the ranking of the top polluted cities depends on the type of pollutant considered and the metric used. For example, Jhang, Multan, and Vehari were characterized as the top three polluted cities in Pakistan when considering AquaTerra DTB AOD products; for PM1, PM2.5, and PM10 Lahore, Gujranwala, and Okara were the top three; for tropospheric NO2 VCD Lahore, Rawalpindi, and Islamabad and for PBL SO2 VCD Lahore, Mirpur, and Gujranwala. The results demonstrate that Pakistan’s entire population has been exposed to high PM2.5 concentrations for many years, with a mean annual value of 54.7 μg/cu. m, over all Pakistan from 2003 to 2020. This value exceeds Pakistan’s National Environmental Quality Standards (Pak-NEQS, i.e., <15 μg/cu. m annual mean) for ambient air defined by the Pakistan Environmental Protection Agency (Pak-EPA) as well as the WHO Interim Target-1 (i.e., mean annual PM2.5 <35 μg/cu. m). The spatial analyses of the concentrations of aerosols and trace gases in terms of population density, nighttime lights, land cover types, and fire location data, and the PSCF analysis indicate that Pakistan’s air quality is strongly affected by anthropogenic sources inside of Pakistan, with contributions from surrounding countries. Statistically significant positive (increasing) trends in PM1, PM2.5, PM10, tropospheric NO2 VCD, and SO2 VCD were observed in ~89%, ~67%, ~48%, 91%, and ~88% of the Pakistani cities (80 cities), respectively. This comprehensive analysis of aerosol and trace gas levels, their characteristics in spatio-temporal domains, and their trends over Pakistan, is the first of its kind. Results will be helpful to the Ministry of Climate Change (Government of Pakistan), Pak-EPA, SUPARCO (Pakistan Space and Upper Atmosphere Research Commission), policymakers, and the local research community to mitigate air pollution and its effects on human health.

Muhammad Bilal↗