Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PBX 9502”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Anisotropy in the Ratchet Growth of PBX 9502

TATB-based compactions and composites are known to undergo “ratchet growth”, an irreversible volume increase that occurs upon heating or cooling of a specimen. Ratchet growth likely arises because the coefficient of thermal expansion of the TATB crystals is strongly anisotropic, but the exact mechanism is not well-understood. TATB crystals in solid, plastic-bonded, explosive PBX 9502 parts can have a preferred crystallographic orientation (texture) caused by the compaction process. As a result, the irreversible strain associated with PBX 9502 ratchet growth is anisotropic. The present paper relates the magnitude of ratchet growth to the crystalline anisotropy of the TATB crystals. The crystalline anisotropy is measured by x-ray diffraction and the ratchet growth is measured by a digital image-correlation technique.

36 MATERIALS SCIENCE↗

SURFplus Model Calibration for PBX 9502

The SURFplus reactive burn model is calibrated for the TATB based explosive PBX 9502 at three initial temperatures; hot (75 C), ambient (23 C) and cold (-55 C). The CJ state depends on the initial temperature due to the variation in the initial density and initial specific energy of the PBX reactants. For the reactants, a porosity model for full density TATB is used. This allows the initial PBX density to be set to its measured value even though the coeffcient of thermal expansion for the TATB and the PBX differ. The PBX products EOS is taken as independent of the initial PBX state. The initial temperature also affects the sensitivity to shock initiation. The model rate parameters are calibrated to Pop plot data, the failure diameter, the limiting detonation speed just above the failure diameters, and curvature effect data for small curvature.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

PBX 9502 Stockpile-Returned Hemi Tension Directionality Study

This work is a continuation of work started in FY12 to evaluate whether the coring direction in PBX 9502 main charges affects the mechanical properties data. In FY13 we performed the compression and thermal expansion portions of the testing.1 In FY14 we have performed the quasi-static tension and compressive creep parts of the study. This paper focuses on the tensile results while a companion paper details the compressive creep results.2 In an effort to obtain mechanical properties samples that would better characterize the density distribution within a main charge and, to a lesser extent, to more thoroughly describe the mechanical behavior of material that has been in the field for long period of time, the LLNL PBX 9502 Core Surveillance coring pattern had been changed between cycles 29 and 30. Where the orientation of the tensile and compression samples tested in surveillance prior to cycle 30 had been cored in the tangential direction, the new coring diagram has both the tension and compression samples being oriented in the hoop direction. Prior to this study, the authors were not aware of any work that systematically demonstrated the effect on tensile properties of samples cored in these distinct directions. The results from this study will inform us of if and how we should trend the data taken before and after the coring pattern change.

42 ENGINEERING↗

PBX 9502 Gas-Generation Throughout Long-Duration Thermal Exposure and Cookoff

When energetic materials are subjected to thermal insult, an event may follow in which the explosive exothermically reacts in an undesirable fashion. This event is known as cookoff, or self-ignition, and understanding how different explosives behave during this event is critical for explosives safety. To further our understanding of how PBX 9502 (95% TATB, 5% Kel-F 800) behaves at cookoff, small scale laboratory experiments were conducted to study the pressure rise created by unconfined samples as they were heated to self-ignition. Collected data included high speed video of deflagration, sample temperature, a time-lapse of thermal damage and expansion, quasi-static pressure during heating, and the dynamic pressure during cookoff. These data provide evidence that this composition remains impermeable through thermal evolution, until internal void pressure overcomes the mechanical strength of the material and drives macro-scale cracking. Previous work reported that PBX 9502 exhibits a pressure-dependent cookoff behavior [1], the cause of which is not entirely understood. The results reported here contribute to an understanding of the underlying behavior which gives rise to the observed pressure dependence.

36 MATERIALS SCIENCE↗

Multiscale numerical investigation of ratchet growth damage effects in PBX 9502

This paper presents results of numerical experiments conducted on the high explosive PBX 9502 to investigate how recently observed grain-scale damage mechanisms of ratchet growth affect uniaxial compression measurements. Simulations are multiscale in the sense of directly resolving grains, pores, cracks, and grain-interfaces based upon scanning electron microscope (SEM) images of damaged and undamaged samples. The combined finite-discrete element method (FDEM) is utilized to resolve both grain-scale microfracture and elastoplastic deformation of solid grains. Pristine (undamaged) and damaged microstructures are compared in simulation of unconfined compression tests of the same material from the literature. Here, the simulation results show the observed microscale mechanisms of damage, specifically microfracture predominantly around and sometimes through grains and crack-associated pore growth, can well-explain the effective degradation of strength and stiffness observed in the laboratory measurements.

36 MATERIALS SCIENCE↗

Detonation shock dynamics calibration for pBX 9502 with temperature, density, and material lot variations

We present a methodology for scaling the detonation shock dynamics D{sub n}[{kappa}] calibration function to accommodate variations in the HE starting material. We apply our model to the insensitive TATB-based explosive PBX 9502, for which we have enough front curvature rate stick data to characterize three material attributes: initial temperature T{sub 0}, nominal density {rho}{sub 0}, and manufacturing lot (representing different microstructures). A useful feature of the model is that it returns an absolute estimate for the reaction zone thickness, {delta}. Lacking demonstrated material metrics(s), we express microstructural variation indirectly, in terms of its effect on {delta}. This results in a D{sub n}[{kappa}] function that depends on T{sub 0}, {rho}{sub 0}, and {delta}. After examining the separate effects of each parameter on D{sub n}[{kappa}], we compute an arc geometry as a validation problem. We compare the calculation to a PBX 9502 arc experiment that was pressed from one of the calibrated HE lots. The agreement between the model and experiment is excellent. We compute worst, nominal, and best-performing material parameter combinations to show how much difference accrues throughout the arc.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Predicting the effects of thermally-induced density gradients on the hydrodynamic behavior of PBX 9502

High explosives are often exposed to thermal and mechanical stimuli within normal and abnormal environments. These stimuli can introduce density gradients in the explosive charge but the effect of such gradients is not well-understood. The goal of this work is to develop a comprehensive methodology to model the evolution of density gradients under various thermal conditions and then to predict shock initiation and detonation behavior of the gradated sample. PBX 9502 was chosen for these scoping studies because it has a large coefficient of thermal expansion and because the available shock initiation data indicates that initial temperature strongly affects the shock-to-detonation transition (SDT). The multiphysics code COMSOL was first used to model induced density gradients in a slab of PBX 9502 with asymmetric heating. Then, the gradated sample was constructed in the Pagosa hydrocode to simulate steel flyer impact scenarios, with SDT and detonation propagation following a calibrated Scaled Uniform Reactive Front (SURF) burn model. Furthermore, the gradated material exhibited very different initiation and corner turning behavior compared to homogeneous materials, and the orientation of the gradation was also found to have some effect. The methodology used here can estimate thermomechanical response of the material for non-uniform thermal environments and compute the resulting detonation properties of the PBX.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of Carbon Clusters in the Detonation Products of the Triaminotrinitrobenzene (TATB)-Based Explosive PBX 9502

Here, the detonation of carbon-rich high explosives yields solid carbon as a major constituent of the product mixture and, depending on the thermodynamic conditions behind the shock front, a variety of carbon allotropes and morphologies may form and evolve. We applied time-resolved small angle x-ray scattering (TR-SAXS) to investigate the dynamics of carbon clustering during detonation of PBX 9502, an explosive composed of triaminotrinitrobenzene (TATB) and 5 wt% fluoropolymer binder. Solid carbon formation was probed from 0.1 to 2.0 μs behind the detonation front and revealed rapid carbon cluster growth which reached a maximum after ~200 ns. The late-time carbon clusters had a radius of gyration of 3.3 nm which is consistent with 8.4 nm diameter spherical particles and matched particle sizes of recovered products. Simulations using a clustering kinetics model were found to be in good agreement with the experimental measurements of cluster growth when invoking a freeze-out temperature, and temporal shift associated with the initial precipitation of solid carbon. Product densities from reactive flow models were compared to the electron density contrast obtained from TR-SAXS and used to approximate the carbon cluster composition as a mixture of 20% highly ordered (diamond-like) and 80% disordered carbon forms, which will inform future product equation of state models for solid carbon in PBX 9502 detonation product mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting Large-scale Effects During Cookoff of Plastic-Bonded Explosives (PBX 9501 PBX 9502 and LX-14)

In this study, we have made reasonable cookoff predictions of large-scale explosive systems by using pressure-dependent kinetics determined from small-scale experiments. Scale-up is determined by properly accounting for pressure generated from gaseous decomposition products and the volume that these reactive gases occupy, e.g. trapped within the explosive, the system, or vented. The pressure effect on the decomposition rates has been determined for different explosives by using both vented and sealed experiments at low densities. Low-density explosives are usually permeable to decomposition gases and can be used in both vented and sealed configurations to determine pressure-dependent reaction rates. In contrast, explosives that are near the theoretical maximum density (TMD) are not as permeable to decomposition gases, and pressure-dependent kinetics are difficult to determine. Ignition in explosives at high densities can be predicted by using pressure-dependent rates determined from the low-density experiments as long as gas volume changes associated with bulk thermal expansion are also considered. In the current work, cookoff of the plastic-bonded explosives PBX 9501 and PBX 9502 is reviewed and new experimental work on LX-14 is presented. Reactive gases are formed inside these heated explosives causing large internal pressures. The pressure is released differently for each of these explosives. For PBX 9501, permeability is increased and internal pressure is relieved as the nitroplasticizer melts and decomposes. Internal pressure in PBX 9502 is relieved as the material is damaged by cracks and spalling. For LX-14, internal pressure is not relieved until the explosive thermally ignites. The current paper is an extension of work presented at the 26th ICDERS symposium [1].

42 ENGINEERING↗

PBX 9502 Failure Diameter: Addendum

In previous reports, the SURFplus reactive burn model was used to study a propagating detonation wave for PBX 9502 in an unconfined rate stick just above the failure diameter. Simulations showed that the sonic boundary condition at the HE interface leads to a boundary layer. Here we provide additional details on the steady-state flow with emphasis on the boundary layer. This confirms the previous conclusion that within the boundary layer the lead shock, which initiates the hot-spot reaction, is largely supported by transverse energy flow in the reaction zone from the interior towards the boundary. Consequently, the reactive wave along a boundary layer streamline does not correspond to a 1-D detonation wave in the sense of detonation shock dynamics; i.e. , the lead shock which initiates the reaction is not driven by the reaction energy along the streamline.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Review of PBX 9502 Pop Plot data

Pop plot data (distance of run and time to detonation as a function of shock pressure) is a simple characterization of shock initiation of a high explosive. It is used, along with other data, to calibrate reactive burn models. For the insensitive TATB based explosive PBX 9502, there are data at 5 initial temperatures (77 K, -55 C, 23 C, 76 C, 130 C) and for several lots. Here we review the dependence of the Pop plot on temperature and the variation with lot. There is a significant increase in shock sensitivity with temperature.Since the Pop plot is important for modeling, fit parameters are interpolated to cover the temperature range –55 < T < 76 C. The scatter in the data and variation with lot is important for assessing the accuracy to which a model can be calibrated.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

A Recipe for implementing the Arrhenius-Shock-Temperature State Sensitive WSD (AWSD) model, with parameters for PBX 9502

A reactive ow model for the tri-amino-tri-nitro-benzene (TATB) based plastic bonded explosive PBX 9502 is presented. This newly devised model is based primarily on the shock temperature of the material, along with local pressure, and accurately models a broader range of detonation and initiation scenarios. The equation of state for the reactants and products, as well as the thermodynamic closure of pressure and temperature equilibration are carried over from the Wescott-Stewart-Davis (WSD) model7,8. Thus, modifying an existing WSD model in a hydrocode should be rather straightforward.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Failure Diameter of PBX 9502: Simulations with the SURFplus model

SURFplus is a reactive burn model for high explosives aimed at modelling shock initiation and propagation of detonation waves. It utilizes the SURF model for the fast hot-spot reaction plus a slow reaction for the energy released by carbon clustering. A feature of the SURF model is that there is a partially decoupling between burn rate parameters and detonation wave properties. Previously, parameters for PBX 9502 that control shock ini- tiation had been calibrated to Pop plot data (distance-of-run to detonation as a function of shock pressure initiating the detonation). Here burn rate parameters for the high pres- sure regime are adjusted to t the failure diameter and the limiting detonation speed just above the failure diameter. Simulated results are shown for an uncon ned rate stick when the 9502 diameter is slightly above and slightly below the failure diameter. Just above the failure diameter, in the rest frame of the detonation wave, the front is sonic at the PBX/air interface. As a consequence, the lead shock in the neighborhood of the interface is supported by the detonation pressure in the interior of the explosive rather than the reaction immediately behind the front. In the interior, the sonic point occurs near the end of the fast hot-spot reaction. Consequently, the slow carbon clustering reaction can not a ect the failure diameter. Below the failure diameter, the radial extent of the detonation front decreases starting from the PBX/air interface. That is, the failure starts at the PBX boundary and propagates inward to the axis of the rate stick.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Model for ratchet growth in PBX 9502

Polycrystalline solids composed of crystals with anisotropic thermal expansion coefficients exhibit ratchet growth (RG), a phenomenon characterized by a cumulative and irreversible volume expansion that develops upon exposing the material to cyclic excursions in temperature. We developed a statistical model for RG. The model attributes RG to the formation of intergranular cracks caused by tessellated internal stresses that develop during the thermal excursions. It is postulated that different sets of internal cracks form upon heating and cooling the polycrystalline solid. The model reproduces RG measurements in pressed TATB and PBX 9502 energetic materials and suggests an explanation for why the amplitude of RG generated by a heating excursion is larger than that generated by a subsequent cooling excursion of the same amplitude.

36 MATERIALS SCIENCE↗

PBX 9502 air-gap tests

A small number of simple air-gap tests were performed on 1-inch diameter PBX 9502 cylinders to determine an approximate threshold for detonation failure. The primary diagnostics were streak imaging and dent measurements in a steel witness plate. Relight was found to occur, with negligible excess transit time, for air gaps up to 1 mm. Relight did not occur with a 3-mm air gap.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

FY18 J23X PDZG Final Report: Double Shock Initiation of PBX 9502 Lot HOL88H891-008

Heterogeneous high explosives subjected to sub-critical shock waves are known to exhibit desensitization to later shock inputs. While it is believed that this phenomenon is due to the removal of hot spot forming features in the explosive by the initial sub-critical shock, the effect of the time delay between the shocks is poorly understood. This report details a series of double shock plate impact experiments that vary the time between similar shocks to explore the time dependance of this shock desensitization process. These experiments were performed on the insensitive explosive PBX 9502 (95% TATB, 5% Kel-F 800) with lot number HOL88H891-008. The evolution of the shocks to a detonation was characterized by 9 embedded magnetic particle velocity gauges, and 116 embedded magnetic time of arrival gauges (AKA shock trackers). Photon Doppler velocimetry (PDV) with a LiF window was used at the back surface of the samples to capture the wave profile exiting the sample. Three double shock experiments were performed, with first and second shock pressures of 8.3 GPa and 16.5 GPa, respectively. An analogous single shock experiment at 16.3 GPa was also performed. The double shock experiments exhibited small levels of reaction during the initial shock,and shock desensitization to the second shock. Run distances after shock coalescence were shorter than those expected for a single shock, indicating the shock to detonation transition (SDT) process was slightly further along due to partial reaction in the first shock wave. These data will be used to calibrate model behavior under multiple-shock conditions. Additional double shock data will be collected to further explore this area in FY2019. All data have been uploaded to the LANL Small Scale Database for use by the research community.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Proton radiography of PBX 9502 detonation shock dynamics confinement sandwich test

Recent results utilizing proton radiography (P-Rad) during the detonation of the high explosive PBX 9502 are presented. Specifically, the effects of confinement of the detonation are examined in the LANL detonation confinement sandwich geometry. The resulting detonation velocity and detonation shock shape are measured. In addition, proton radiography allows one to image the reflected shocks through the detonation products. Comparisons are made with detonation shock dynamics (DSD) and reactive flow models for the lead detonation shock and detonation velocity. In addition, predictions of reflected shocks are made with the reactive flow models.

66↗

PBX 9502 ratchet growth experiments on a dilatometer

A Netzsch dilatometer has been used to probe the ratchet growth response of TATB-containing PBX 9502. Preliminary data are presented, showing test reproducibility and examining possible effects of density and/or the specific sequencing of different thermal ranges. We have also shown effects of thermal ramp rate on the test data, likely due to thermal equilibrium of the specimen environment.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗