Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Outer approximation algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

50 records · Page 3

HSQ double patterning process for 12 nm resolution x-ray zone plates

Soft x-ray zone plate microscopy is a powerful nano-analytic technique used for a wide variety of scientific and technological studies. Pushing its spatial resolution to 10 nm and below is highly desired and feasible due to the short wavelength of soft x-rays. Instruments using Fresnel zone plate lenses achieve a spatial resolution approximately equal to the smallest, outer most zone width. We developed a double patterning zone plate fabrication process based on a high-resolution resist, hydrogen silsesquioxane (HSQ), to bypass the limitations of conventional single exposure fabrication to pattern density, such as finite beam size, scattering in resist and modest intrinsic resist contrast. To fabricate HSQ structures with zone widths in the order of 10 nm on gold plating base, a surface conditioning process with (3-mercaptopropyl) trimethoxysilane, 3-MPT, is used, which forms a homogeneous hydroxylation surface on gold surface and provides good anchoring for the desired HSQ structures. Using the new HSQ double patterning process, coupled with an internally developed, sub-pixel alignment algorithm, we have successfully fabricated in-house gold zone plates of 12 nm outer zones. Promising results for 10 nm zone plates have also been obtained. With the 12 nm zone plates, we have achieved a resolution of 12 nm using the full-field soft x-ray microscope, XM-1.

36 MATERIALS SCIENCE↗

THE BOLOCAM GALACTIC PLANE SURVEY: SURVEY DESCRIPTION AND DATA REDUCTION

We present the Bolocam Galactic Plane Survey (BGPS), a 1.1 mm continuum survey at 33'' effective resolution of 170 deg{sup 2} of the Galactic Plane visible from the northern hemisphere. The BGPS is one of the first large area, systematic surveys of the Galactic Plane in the millimeter continuum without pre-selected targets. The survey is contiguous over the range -10.5 {<=} l {<=} 90.5, |b| {<=} 0.5. Toward the Cygnus X spiral arm, the coverage was flared to |b| {<=} 1.5 for 75.5 {<=} l {<=} 87.5. In addition, cross-cuts to |b| {<=} 1.5 were made at l= 3, 15, 30, and 31. The total area of this section is 133 deg{sup 2}. With the exception of the increase in latitude, no pre-selection criteria were applied to the coverage in this region. In addition to the contiguous region, four targeted regions in the outer Galaxy were observed: IC1396 (9 deg{sup 2}, 97.5 {<=} l {<=} 100.5, 2.25 {<=} b {<=} 5.25), a region toward the Perseus Arm (4 deg{sup 2} centered on l = 111, b = 0 near NGC 7538), W3/4/5 (18 deg{sup 2}, 132.5 {<=} l {<=} 138.5), and Gem OB1 (6 deg{sup 2}, 187.5 {<=} l {<=} 193.5). The survey has detected approximately 8400 clumps over the entire area to a limiting non-uniform 1{sigma} noise level in the range 11-53 mJy beam{sup -1} in the inner Galaxy. The BGPS source catalog is presented in a previously published companion paper. This paper details the survey observations and data reduction methods for the images. We discuss in detail the determination of astrometric and flux density calibration uncertainties and compare our results to the literature. Data processing algorithms that separate astronomical signals from time-variable atmospheric fluctuations in the data timestream are presented. These algorithms reproduce the structure of the astronomical sky over a limited range of angular scales and produce artifacts in the vicinity of bright sources. Based on simulations, we find that extended emission on scales larger than about 5.'9 is nearly completely attenuated (>90%) and the linear scale at which the attenuation reaches 50% is 3.'8. Comparison with other millimeter-wave data sets implies a possible systematic offset in flux calibration, for which no cause has been discovered. This presentation serves as a companion and guide to the public data release (http://irsa.ipac.caltech.edu/Missions/bolocam.html) through NASA's Infrared Processing and Analysis Center (IPAC) Infrared Science Archive (IRSA). New data releases will be provided through IPAC-IRSA with any future improvements in the reduction. The BGPS provides a complementary long-wavelength spectral band for the ongoing ATLASGAL and Herschel-SPIRE surveys, and an important database and context for imminent observations with SCUBA-2 and ALMA.

79 ASTRONOMY AND ASTROPHYSICS↗

The Hitchhiker's Guide to the Outer Solar System

We propose a novel deep space propulsion method called the Comet Hitchhiker. The concept is to perform momentum exchange with small bodies (i.e., asteroid and comet) using an extendable/retrievable tether and a harpoon. Unlike previously proposed tethered fly-by, the use of extendable tether enables to change the relative speed with a target. Hence Hitchhiker would be a prospective means of providing orbit insertion deltaV, particularly for rendezvous missions to small bodies in the outer Solar System such as Kuiper belt objects and Centaurs, which are not easily manageable with chemical propulsion or solar electric propulsion. Furthermore, by applying regenerative brake during a hitchhike maneuver, a Hitchhiker can harvest energy. The stored energy can be used to make a departure from the target by quickly retrieving the tether, which we call a inverse hitchhike maneuver. By repeating hitchhike and inverse Hitchhike maneuvers, a Hitchhiker could perform a mission to rendezvous with multiple targets efficiently, which we call a multi-hitchhike mission. We derive the basic equation of Hitchhiker, namely the Space Hitchhike Equation, which relates the specific strength and mass fraction of tether to achievable ∆V. We then perform detailed feasibility analysis through finite element simulations of tether as well as hypervelocity impact simulations of the harpoon using the Adaptive Mesh Refinement Objected-oriented C++ (AMROC) algorithm. The analysis results suggest that a hitchhike maneuver with deltaV = approximately 1.5km/s is feasible with flight proven materials such as Kevlar/Zylon tether and tungsten harpoon. A carbon nanotube tether, combined with diamond harpoon, would enable approximately 10 km/s hitchhike maneuver. Finally, we present two particular mission scenarios for Hitchhiker: Pluto rendezvous and a multi-hitchhike mission to the Themis family asteroids in the main belt.

Ono, Masahiro↗

The Hitchhiker's Guide to the Outer Solar System

We propose a novel deep space propulsion method called the Comet Hitchhiker. The concept is to perform momentum exchange with small bodies (i.e., asteroid and comet) using an extendable/retrievable tether and a harpoon. Unlike previously proposed tethered fly-by, the use of extendable tether enables to change the relative speed with a target. Hence Hitchhiker would be a prospective means of providing orbit insertion deltaV, particularly for rendezvous missions to small bodies in the outer Solar System such as Kuiper belt objects and Centaurs, which are not easily manageable with chemical propulsion or solar electric propulsion. Furthermore, by applying regenerative brake during a hitchhike maneuver, a Hitchhiker can harvest energy. The stored energy can be used to make a departure from the target by quickly retrieving the tether, which we call a inverse hitchhike maneuver. By repeating hitchhike and inverse Hitchhike maneuvers, a Hitchhiker could perform a mission to rendezvous with multiple targets efficiently, which we call a multi-hitchhike mission. We derive the basic equation of Hitchhiker, namely the Space Hitchhike Equation, which relates the specific strength and mass fraction of tether to achievable ∆V. We then perform detailed feasibility analysis through finite element simulations of tether as well as hypervelocity impact simulations of the harpoon using the Adaptive Mesh Refinement Objected-oriented C++ (AMROC) algorithm. The analysis results suggest that a hitchhike maneuver with deltaV = approximately 1.5km/s is feasible with flight proven materials such as Kevlar/Zylon tether and tungsten harpoon. A carbon nanotube tether, combined with diamond harpoon, would enable approximately 10 km/s hitchhike maneuver. Finally, we present two particular mission scenarios for Hitchhiker: Pluto rendezvous and a multi-hitchhike mission to the Themis family asteroids in the main belt.

Ono, Masahiro↗

MULTI-SCALE MODELING AND APPROXIMATION ASSISTED OPTIMIZATION OF BARE TUBE HEAT EXCHANGERS

Air-to-refrigerant heat exchangers are very common in air-conditioning, heat pump and refrigeration applications. In these heat exchangers, there is a great benefit in terms of size, weight, refrigerant charge and heat transfer coefficient, by moving from conventional channel sizes (~ 9mm) to smaller channel sizes (< 5mm). This work investigates new designs for air-to-refrigerant heat exchangers with tube outer diameter ranging from 0.5 to 2.0mm. The goal of this research is to develop and optimize the design of these heat exchangers and compare their performance with existing state of the art designs. The air-side performance of various tube bundle configurations are analyzed using a Parallel Parameterized CFD (PPCFD) technique. PPCFD allows for fast-parametric CFD analyses of various geometries with topology change. Approximation techniques drastically reduce the number of CFD evaluations required during optimization. Maximum Entropy Design method is used for sampling and Kriging method is used for metamodeling. Metamodels are developed for the air-side heat transfer coefficients and pressure drop as a function of tube-bundle dimensions and air velocity. The metamodels are then integrated with an air-to-refrigerant heat exchanger design code. This integration allows a multi-scale analysis of air-side performance heat exchangers including air-to-refrigerant heat transfer and phase change. Overall optimization is carried out using a multi-objective genetic algorithm. The optimal designs found can exhibit 50 percent size reduction, 75 percent decrease in air side pressure drop and doubled air heat transfer coefficients compared to a high performance compact micro channel heat exchanger with same capacity and flow rates.

CFD↗

SU-G-BRC-16: Theory and Clinical Implications of the Constant Dosimetric Leaf Gap (DLG) Approximation

Purpose: Commercial dose calculation algorithms incorporate a single DLG value for a given beam energy that is applied across an entire treatment field. However, the physical processes associated with beam generation and dose delivery suggest that the DLG is not constant. The aim of this study is to evaluate the variation of DLG among all leaf pairs, to quantify how this variation impacts delivered dose, and to establish a novel method to correct dose distributions calculated using the approximation of constant DLG. Methods: A 2D diode array was used to measure the DLG for all 60 leaf pairs at several points along each leaf pair travel direction. This approach was validated by comparison to DLG values measured at select points using a 0.6 cc ion chamber with the standard formalism. In-house software was developed to enable incorporation of position dependent DLG values into dose distribution optimization and calculation. The accuracy of beam delivery of both the corrected and uncorrected treatment plans was studied through gamma pass rate evaluation. A comparison of DVH statistics in corrected and uncorrected treatment plans was made. Results: The outer 20 MLC leaf pairs (1.0 cm width) have DLG values that are 0.32 mm (mean) to 0.65 mm (maximum) lower than the central leaf-pair. VMAT plans using a large number of 1 cm wide leaves were more accurately delivered (gamma pass rate increased by 5%) and dose coverage was higher (D100 increased by 3%) when the 2D DLG was modeled. Conclusion: Using a constant DLG value for a given beam energy will result in dose optimization, dose calculation and treatment delivery inaccuracies that become significant for treatment plans with high modulation complexity scores delivered with 1 cm wide leaves.

60 APPLIED LIFE SCIENCES↗

Multidisciplinary Optimization of Tilt Rotor Blades Using Comprehensive Composite Modeling Technique

An optimization procedure is developed for addressing the design of composite tilt rotor blades. A comprehensive technique, based on a higher-order laminate theory, is developed for the analysis of the thick composite load-carrying sections, modeled as box beams, in the blade. The theory, which is based on a refined displacement field, is a three-dimensional model which approximates the elasticity solution so that the beam cross-sectional properties are not reduced to one-dimensional beam parameters. Both inplane and out-of-plane warping are included automatically in the formulation. The model can accurately capture the transverse shear stresses through the thickness of each wall while satisfying stress free boundary conditions on the inner and outer surfaces of the beam. The aerodynamic loads on the blade are calculated using the classical blade element momentum theory. Analytical expressions for the lift and drag are obtained based on the blade planform with corrections for the high lift capability of rotor blades. The aerodynamic analysis is coupled with the structural model to formulate the complete coupled equations of motion for aeroelastic analyses. Finally, a multidisciplinary optimization procedure is developed to improve the aerodynamic, structural and aeroelastic performance of the tilt rotor aircraft. The objective functions include the figure of merit in hover and the high speed cruise propulsive efficiency. Structural, aerodynamic and aeroelastic stability criteria are imposed as constraints on the problem. The Kreisselmeier-Steinhauser function is used to formulate the multiobjective function problem. The search direction is determined by the Broyden-Fletcher-Goldfarb-Shanno algorithm. The optimum results are compared with the baseline values and show significant improvements in the overall performance of the tilt rotor blade.

Chattopadhyay, Aditi↗

Enhanced decoding for the Galileo S-band mission

A coding system under consideration for the Galileo S-band low-gain antenna mission is a concatenated system using a variable redundancy Reed-Solomon outer code and a (14,1/4) convolutional inner code. The 8-bit Reed-Solomon symbols are interleaved to depth 8, and the eight 255-symbol codewords in each interleaved block have redundancies 64, 20, 20, 20, 64, 20, 20, and 20, respectively (or equivalently, the codewords have 191, 235, 235, 235, 191, 235, 235, and 235 8-bit information symbols, respectively). This concatenated code is to be decoded by an enhanced decoder that utilizes a maximum likelihood (Viterbi) convolutional decoder; a Reed Solomon decoder capable of processing erasures; an algorithm for declaring erasures in undecoded codewords based on known erroneous symbols in neighboring decodable words; a second Viterbi decoding operation (redecoding) constrained to follow only paths consistent with the known symbols from previously decodable Reed-Solomon codewords; and a second Reed-Solomon decoding operation using the output from the Viterbi redecoder and additional erasure declarations to the extent possible. It is estimated that this code and decoder can achieve a decoded bit error rate of 1 x 10(exp 7) at a concatenated code signal-to-noise ratio of 0.76 dB. By comparison, a threshold of 1.17 dB is required for a baseline coding system consisting of the same (14,1/4) convolutional code, a (255,223) Reed-Solomon code with constant redundancy 32 also interleaved to depth 8, a one-pass Viterbi decoder, and a Reed Solomon decoder incapable of declaring or utilizing erasures. The relative gain of the enhanced system is thus 0.41 dB. It is predicted from analysis based on an assumption of infinite interleaving that the coding gain could be further improved by approximately 0.2 dB if four stages of Viterbi decoding and four levels of Reed-Solomon redundancy are permitted. Confirmation of this effect and specification of the optimum four-level redundancy profile for depth-8 interleaving is currently being done.

Dolinar, S.↗

The SMAP Level 4 Surface and Root-zone Soil Moisture (L4_SM) Product

The Soil Moisture Active and Passive (SMAP) mission is being developed by NASA for launch in 2013 as one of four first-tier missions recommended by the U.S. National Research Council Committee on Earth Science and Applications from Space in 2007. The primary science objectives of SMAP are to enhance understanding of land surface controls on the water, energy and carbon cycles, and to determine their linkages. Moreover, the high resolution soil moisture mapping provided by SMAP has practical applications in weather and seasonal climate prediction, agriculture, human health, drought and flood decision support. In this paper we describe the assimilation of SMAP observations for the generation of the planned SMAP Level 4 Surface and Root-zone Soil Moisture (L4_SM) product. The SMAP mission makes simultaneous active (radar) and passive (radiometer) measurements in the 1.26-1.43 GHz range (L-band) from a sun-synchronous low-earth orbit. Measurements will be obtained across a 1000 km wide swath using conical scanning at a constant incidence angle (40 deg). The radar resolution varies from 1-3 km over the outer 70% of the swath to about 30 km near the center of the swath. The radiometer resolution is 40 km across the entire swath. The radiometer measurements will allow high-accuracy but coarse resolution (40 km) measurements. The radar measurements will add significantly higher resolution information. The radar is however very sensitive to surface roughness and vegetation structure. The combination of the two measurements allows optimal blending of the advantages of each instrument. SMAP directly observes only surface soil moisture (in the top 5 cm of the soil column). Several of the key applications targeted by SMAP, however, require knowledge of root zone soil moisture (approximately top 1 m of the soil column), which is not directly measured by SMAP. The foremost objective of the SMAP L4_SM product is to fill this gap and provide estimates of root zone soil moisture that are informed by and consistent with SMAP observations. Such estimates are obtained by merging SMAP observations with estimates from a land surface model in a soil moisture data assimilation system. The land surface model component of the assimilation system is driven with observations-based surface meteorological forcing data, including precipitation, which is the most important driver for soil moisture. The model also encapsulates knowledge of key land surface processes, including the vertical transfer of soil moisture between the surface and root zone reservoirs. Finally, the model interpolates and extrapolates SMAP observations in time and in space. The L4_SM product thus provides a comprehensive and consistent picture of land surface hydrological conditions based on SMAP observations and complementary information from a variety of sources. The assimilation algorithm considers the respective uncertainties of each component and yields a product that is superior to satellite or model data alone. Error estimates for the L4_SM product are generated as a by-product of the data assimilation system.

Reichle, Rolf↗

Multiple time step integrators in ab initio molecular dynamics

Multiple time-scale algorithms exploit the natural separation of time-scales in chemical systems to greatly accelerate the efficiency of molecular dynamics simulations. Although the utility of these methods in systems where the interactions are described by empirical potentials is now well established, their application to ab initio molecular dynamics calculations has been limited by difficulties associated with splitting the ab initio potential into fast and slowly varying components. Here we present two schemes that enable efficient time-scale separation in ab initio calculations: one based on fragment decomposition and the other on range separation of the Coulomb operator in the electronic Hamiltonian. We demonstrate for both water clusters and a solvated hydroxide ion that multiple time-scale molecular dynamics allows for outer time steps of 2.5 fs, which are as large as those obtained when such schemes are applied to empirical potentials, while still allowing for bonds to be broken and reformed throughout the dynamics. This permits computational speedups of up to 4.4x, compared to standard Born-Oppenheimer ab initio molecular dynamics with a 0.5 fs time step, while maintaining the same energy conservation and accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AEOLUS: Advances in Experimental Design, Optimal Control, and Learning for Uncertain Complex Systems

Sustained advances in the mathematics of modeling and simulation have resulted in the capability today for routine simulation of a number of large scale complex DOE-relevant systems. As remarkable as this capability for solving the so-called forward problem is, it is typically only the first step-an inner loop within an outer loop that explores the simulation model's parameter space and decision space to characterize uncertainty in the model's predictions, learn unknown model parameters from data, design the most informative experiments, determine optimal control strategies, and create optimal designs. Broadly, what unifies all of these outer loop problems is that they are, in one form or another, optimization problems over parameter/control/design space that are constrained by complex uncertain models. To fully realize the power of scientific simulation as a basis for scientific discovery, technological innovation, and rational decision-making, it is imperative to move beyond simulation to tackle the outer loop of optimization for learning from data, experimental design, and control with complex uncertain models. When the models under consideration are large-scale and complex, and when the optimization variable and uncertain parameter spaces are high (or infinite) dimensional, this constitutes a grand challenge of the highest order, and is intractable with conventional methods. To overcome these challenges, the AEOLUS Center was established to develop a unified mathematical, computational, and statistical framework for (1) Learning predictive models from complex data via Bayesian inference and optimization, and (2) Optimizing experiments, processes, and designs using the resulting uncertain models. These problems are intractable with conventional methods, for several reasons: (1) The simulation problems that govern the inner loops of the optimization problems are expensive to execute (due to severe nonlinearity, heterogeneity, multiphysics/multiscale coupling); (2) The optimization variable and uncertain parameter spaces are high dimensional, often stemming from discretizations of infinite dimensional fields such as initial conditions, sources, or material properties. We argue that the key to overcoming these challenges is to develop new mathematical, computational, and statistical methods that exploit the structure of the Bayesian inference and optimization problems mediated by their underlying complex uncertain models. This structure includes the regularity, sparsity, geometry, low intrinsic dimensionality, and multifidelity nature of the maps from uncertain parameter/optimization variable spaces to the specific objectives targeted: Bayesian inference, optimal experimental design, and optimal control design. Black box methods developed as generic tools are incapable of exploiting this structure. To be successful, we must create, integrate, and cross-fertilize ideas across multiple areas of applied math--including approximation theory, Bayesian inference, data science, experimental design, information theory, machine learning, model reduction, optimal control theory, parallel algorithms, PDE-constrained optimization, randomized algorithms, stochastic optimization, and uncertainty quantification--all while exploiting the structure of the problems at hand. With this goal in mind, we have marshaled a team of leading authorities in these areas. While the methods we develop will be broadly applicable across a wide spectrum of DOE problems in which experiments inform models and the systems those models describe must be optimized under uncertainty, we have chosen a specific area, advanced manufacturing and materials, to drive our work. AMM is characterized by complex models across multiple scales, and is a rich source of challenging problems in inference, experimental design, and optimal control, requiring multifaceted and integrated advances in applied mathematics. As such, AMM serves as an excellent vehicle to motivate and demonstrate the advances in applied mathematics developed by our center.

97 MATHEMATICS AND COMPUTING↗

New Global Electron Density Observations from GPS-RO in the D- and E-Region Ionosphere

A novel retrieval technique is developed for electron density (N(sub e)) in the D- and E-region (80-120 km) using the high-quality 50-Hz GPS radio occultation (GPS-RO) phase measurements. The new algorithm assumes a slow, linear variation in the F-region background when the GPS-RO passes through the D- and E-region, and extracts the N(sub e) profiles at 80-130 km from the phase advance signal caused by N(sub e). Unlike the conventional Abel function, the new approach produces a sharp N(sub e) weighting function in the lower ionosphere, and the N(sub e) retrievals are in good agreement with the IRI (International Reference Ionosphere) model in terms of monthly maps, zonal means and diurnal variations. The daytime GPS-RO N(sub e) profiles can be well characterized by the alpha-Chapman function of three parameters (N(sub mE), h(sub mE) and H), showing that the bottom of E-region is deepening and sharpening towards the summer pole. At high latitudes the monthly GPS-RO N(sub e) maps at 80-120 km reveal clear enhancement in the auroral zones, more prominent at night, as a result of energetic electron precipitation (EEP) from the outer radiation belt. The D-/E-region auroral N(sub e) is strongly correlated with K(sub p) on a daily basis. The new N(sub e) data allow further comprehensive analyses of the sporadic E (E(sub s)) phenomena in connection with the background N(sub e) in the E-region. The layered (2-10 km) and fluctuated (less than 2 km) E(sub s) components, namely N(sub e_Layer) than N(sub e_Pert), are extracted with respect to the background N( sub e_Region) on a profile-by-profile basis. The N(sub e_Layer) component has a strong but highly-refined peak at approximately 105 km, with an amplitude smaller than N(sub e_Region) approximately by an order of magnitude. The N(sub e_Pert) component, which was studied extensively in the past, is approximately 2 orders of magnitude weaker than N(sub e_Layer). Both N(sub e_Layer) and N(sub e_Pert) are subject to significant diurnal and semidiurnal variations, showing downward progression with local time in amplitude. The 11-year solar cycle dominates the N(sub e) interannual variations, showing larger N(sub e_Region) and N(sub e_Layer) but smaller N(sub e_Pert) amplitudes in the solar maximum years. Enhanced Ne profiles are often observed in the polar winter, showing good correlation with solar proton events (SPEs) and geomagnetic activity. The new methodology offers great potential for retrieving low N(sub e) in the D-region, where radio propagation and communication blackouts can occur due to enhanced ionization. For space weather applications it is recommended for GPSRO operations to raise the top of high-rate data acquisition to approximately 140 km in the future.

GSP-R↗

DIF3D-VARIANT 12.0: Updates and New Features

The DIF3D code has been a workhorse of fast reactor analysis work at Argonne National Laboratory for over 40 years. In 1995, a transport option called VARIANT was added to DIF3D to improve the flux solutions for fast reactor problems which we term DIF3D-VARIANT today. DIF3D-VARIANT performs nodal neutron transport calculations using P N or SP N theory in Cartesian and hexagonal two- and three-dimensional geometries. The limited computing capabilities of the time restricted DIF3D-VARIANT to use at most a 6 th order spatial approximation combined with a P3 flux approximation and P1 scattering kernel for a 33 group structure on most studied reactor problems. Computer capabilities have increased steadily since 1995 and today much larger space-angle-energy approximations are possible. This manuscript serves as an update to the theory section of the original DIF3D-VARIANT manual and details more than twenty years of changes made to DIF3D to make version 12 which was released on November 1 st , 2024. The primary focus of the initial work was to extend the space-angle approximations available in DIF3D-VARIANT such that the error due to transport approximations could be better understood. This work was started and completed in 2002 and marked the official version 10. Unfortunately, those higher order approximations could not be used at that time due to the memory constraints of the BPOINTER part of DIF3D (limited to 2 GB). In version 11, completed in 2012, BPOINTER was circumvented in DIF3D-VARIANT for the largest arrays by introducing a Fortran 90 module called LMA (Large Memory Array). This seamlessly replaces all of the functionality of the BPOINTER concept, but it allows 64 bit addressing for every array such that they can be larger than 2 GB. It is now common for DIF3D-VARIANT jobs to consume 50 GB of memory on modern workstations when using high order space-angle approximations and a large number of groups. Many improvements were made to version 11 from 2012 to 2022 when work to create version 12 started. For version 12, several parts of DIF3D were updated to improve performance and thread parallelism was introduced to further reduce the runtime. Numerous minor bugs were discovered in DIF3D-VARIANT as part of the process of creating the perturbation and sensitivity code PERSENT. All of these algorithmic problems were identified in the transition from version 10 to version 11 which prevented DIF3D-VARIANT from running efficiently and reliably. Firstly, the coarse mesh rebalance scheme would routinely diverge and a study detailed in this report demonstrates how it was also typically not effective. This is not a failure of the coarse mesh rebalance methodology, but a failure of its implementation in DIF3D-VARIANT for hexagonal geometries. The fission source extrapolation algorithm was also found to be unreliable on larger group structure problems, leading to divergence in some cases and a negligible improvement in performance overall. Finally, the “Omega” acceleration applied to the partial current solver routine of DIF3D-VARIANT was found to cause DIF3D-VARIANT to converge to the wrong answer. To resolve these issues, both the coarse mesh rebalance and fission source extrapolation were permanently disabled in version 11. The Tchebychev acceleration was put in as a temporary reliable alternative but it is generally inferior to coarse mesh rebalance or coarse mesh finite difference. For the Omega acceleration, the factor was restricted to guarantee that it would not cause follow-on errors in PERSENT. Due to limited funding to support maintenance and development of DIF3D in the last 10 years, no effort was spent since to resolve the outer iteration acceleration. Except for the threading work, all of the changes discussed in this manuscript refer to changes made between version 10 and version 11. Performance comparisons are done to demonstrate the improvements from version 9 to version 12. As will be demonstrated, the updated versi

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A 3D High-Order Unstructured Finite-Volume Algorithm for Solving Maxwell's Equations

A three-dimensional finite-volume algorithm based on arbitrary basis functions for time-dependent problems on general unstructured grids is developed. The method is applied to the time-domain Maxwell equations. Discrete unknowns are volume integrals or cell averages of the electric and magnetic field variables. Spatial terms are converted to surface integrals using the Gauss curl theorem. Polynomial basis functions are introduced in constructing local representations of the fields and evaluating the volume and surface integrals. Electric and magnetic fields are approximated by linear combinations of these basis functions. Unlike other unstructured formulations used in Computational Fluid Dynamics, the new formulation actually does not reconstruct the field variables at each time step. Instead, the spatial terms are calculated in terms of unknowns by precomputing weights at the beginning of the computation as functions of cell geometry and basis functions to retain efficiency. Since no assumption is made for cell geometry, this new formulation is suitable for arbitrarily defined grids, either smooth or unsmooth. However, to facilitate the volume and surface integrations, arbitrary polyhedral cells with polygonal faces are used in constructing grids. Both centered and upwind schemes are formulated. It is shown that conventional schemes (second order in Cartesian grids) are equivalent to the new schemes using first degree polynomials as the basis functions and the midpoint quadrature for the integrations. In the new formulation, higher orders of accuracy are achieved by using higher degree polynomial basis functions. Furthermore, all the surface and volume integrations are carried out exactly. Several model electromagnetic scattering problems are calculated and compared with analytical solutions. Examples are given for cases based on 0th to 3rd degree polynomial basis functions. In all calculations, a centered scheme is applied in the interior, while an upwind matching scheme is employed at material interfaces and the Engquist-Majda non-reflecting boundary condition is implemented at the numerical outer boundaries. The staggered leapfrog scheme and the Runge-Kutta methods are utilized for the time integration. Excellent agreements are found between the numerical and analytical solutions.

Liu, Yen↗