Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Orthotropic Composite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Geometrically nonlinear analysis of layered composite shells

Two kinds of finite-element analyses are developed for the geometrically nonlinear study of the large deformations in laminated composite structures, especially shells. The first kind of finite-element analysis utilizes the general incremental variational formulation as well as the total Lagrangian description of motion, and a three-dimensional degenerate element is adopted. The second kind of analysis employs a formulation based on deformable shell theory, and the plate-bending element is used. Numerical results for bending are presented for five plate and shell structures of isotropic as well as orthotropic composition, including an isotropic cylindrical panel with uniform loading and a laminated cylindrical panel with uniform loading. The results obtained using these analyses are found to be in good agreement with those available in the literature.

Chao, W. C.↗
NASA NTRS1986

An approximate buckling analysis for rectangular orthotropic plates with centrally located cutouts

An approximate analysis for predicting buckling of rectangular orthotropic composite plates with centrally located cutouts is presented. In this analysis, prebuckling and buckling problems are converted from a two-dimensional to a one-dimensional system of linear differential equations with variable coefficients. The conversion is accomplished by expressing the displacements as series with each element containing a trigonometric function of one coordinate and a coefficient that is an arbitrary function of the other coordinate. Ordinary differential equations are then obtained from a variational principle. Analytical results obtained from the approximate analysis are compared with finite element analyses for isotropic plates and for specially orthotropic plates with central circular cutouts of various sizes. Experimental results for the specially orthotropic plates are also presented. In nearly all cases, the approximate analysis predicts the buckling mode shapes correctly and predicts the buckling loads to within a few percent of the finite element and experimental results.

Nemeth, M. P.↗
NASA NTRS2001

Notch Sensitivity of Woven Ceramic Matrix Composites Under Tensile Loading: An Experimental, Analytical, and Finite Element Study

The stress concentrations associated with circular notches and subjected to uniform tensile loading in woven ceramic matrix composites (CMCs) have been investigated for high-efficient turbine engine applications. The CMC's were composed of Nicalon silicon carbide woven fabric in SiNC matrix manufactured through polymer impregnation process (PIP). Several combinations of hole diameter/plate width ratios and ply orientations were considered in this study. In the first part, the stress concentrations were calculated measuring strain distributions surrounding the hole using strain gages at different locations of the specimens during the initial portion of the stress-strain curve before any microdamage developed. The stress concentration was also calculated analytically using Lekhnitskii's solution for orthotropic plates. A finite-width correction factor for anisotropic and orthotropic composite plate was considered. The stress distributions surrounding the circular hole of a CMC's plate were further studied using finite element analysis. Both solid and shell elements were considered. The experimental results were compared with both the analytical and finite element solutions. Extensive optical and scanning electron microscopic examinations were carried out for identifying the fracture behavior and failure mechanisms of both the notched and notched specimens. The stress concentration factors (SCF) determined by analytical method overpredicted the experimental results. But the numerical solution underpredicted the experimental SCF. Stress concentration factors are shown to increase with enlarged hole size and the effects of ply orientations on stress concentration factors are observed to be negligible. In all the cases, the crack initiated at the notch edge and propagated along the width towards the edge of the specimens.

Haque, A.↗
NASA NTRS1977

Effect of transient liquid flow on retention characteristics of screen acquisition systems

A design analysis, is developed based on experimental data, to predict the effects of transient flow and pressure surges (caused either by valve or pump operation, or by boiling of liquids in warm lines) on the retention performance of screen acquisition systems. A survey of screen liquid acquisition system applications was performed to determine appropriate system environment and classification. A screen model was developed which assumed that the screen device was a uniformly distributed composite orthotropic structure, and which accounted for liquid inflow/outflow, gas ingestion quality, screen stress, and liquid spill. A series of 177 tests using 13 specimens (5 screen meshes, 4 screen device construction/backup methods, and 2 orientations) with three test fluids (isopropyl alcohol, Freon 114, and LH2) provided data which verified important features of the screen model and resulted in a design tool which could accurately predict the transient startup performance acquisition devices.

Cady, E. C.↗
DOE OSTI2023

Ply Strength Prediction of Unidirectional Continuous Carbon Fiber Composites

As inhomogeneous orthotropic materials, composite mechanical properties can be difficult to predict. Even with tight fabrication process controls, there is always some microstructural variation that will affect these properties. As a highly defect-dependent phenomena, mechanical strength is even more subject to variation, especially considering that composites exhibit multiple potential failure modes. The most direct way to determine composite material strength is via experimental testing, maintaining loading and specimen morphology as close as possible to the in situ states. When multiple materials and designs are being considered, this process is often prohibitively costly and slow. However, some approximations and rules of thumb can consistently guide the design process and consideration of alternatives.

36 MATERIALS SCIENCE↗
NASA NTRS1983

Stiffness Properties for Dynamic Modeling of Composite Graphite-Epoxy Cylindrical Orthotropic Shells

Traditional composite lamination theory was used to predict composite graphite-epoxy laminate stiffnesses for comparison to quasi-experimental stiffnesses developed from cylindrical bottle pressure testing. Stiffness sensitivities were examined for variations in constituent materials and geometric properties. The material component interactions examined were the fiber longitudinal and transverse Young's modulus, the fiber shear modulus and primary Poisson's ratio, the resin Young's modulus, shear modulus, and Poisson's ratio. The geometric variation of the helical winding angle was also examined. Two computer programs were written to generate the data used to demonstrate the stiffness variations.

Tolbert, R. N.↗
NASA NTRS1983

Field-incidence transmission of treated orthotropic and laminated composite panels

In an effort to improve understanding of the phenomenon of noise transmission through the sidewalls of an aircraft fuselage, an analytical model was developed for the field incidence transmission loss of an orthotropic or laminated composite infinite panel with layers of various noise insulation treatments. The model allows for four types of treatments, impervious limp septa, orthotropic trim panels, porous blankets, and air spaces, while it also takes into account the effects of forward speed. Agreement between the model and transmission loss data for treated panels is seen to be fairly good overall. In comparison with transmission loss data for untreated composite panels, excellent agreement occurred.

Koval, L. R.↗
NASA NTRS1982

Photo-orthotropic elasticity - A new technique for stress analysis of composites

This paper deals with the application of photoelastic methods to glass fiber reinforced plastics. The basic principles governing the photoelastic response in birefringent orthotropic composites are briefly reviewed. Then, three important aspects of photo-orthotropic elasticity, namely, photoelastic calibration, separation of principal stresses, and application to problems of engineering importance, are considered in detail. A new calibration specimen is proposed for determining the three independent photoelastic constants: an orthotropic half-plane subjected to a concentrated edge load. From the isochromatic response, the three stress-fringe values can be obtained by a least-squares procedure based on the theoretical stress distribution. Next, four methods of separating the principal stresses in birefringent composite models are proposed: the method of drilling small holes at the points of interest, the method of oblique incidence, the method of combining the transmitted photoelastic response with the reflected photoelastic response, and the method of birefringence dispersion.

Prabhakaran, R.↗
NASA NTRS2016

Thermal Properties of Hybrid Carbon Nanotube/Carbon Fiber Polymer

Carbon fiber reinforced polymer (CFRP) composites possess many advantages for aircraft structures over conventional aluminum alloys: light weight, higher strength- and stiffness-to-weight ratio, and low life-cycle maintenance costs. However, the relatively low thermal and electrical conductivities of CFRP composites are deficient in providing structural safety under certain operational conditions such as lightning strikes. One possible solution to these issues is to interleave carbon nanotube (CNT) sheets between conventional carbon fiber (CF) composite layers. However, the thermal and electrical properties of the orthotropic hybrid CNT/CF composites have not been fully understood. In this study, hybrid CNT/CF polymer composites were fabricated by interleaving layers of CNT sheets with Hexcel (Registered Trademark) IM7/8852 prepreg. The CNT sheets were infused with a 5% solution of a compatible epoxy resin prior to composite fabrication. Orthotropic thermal and electrical conductivities of the hybrid polymer composites were evaluated. The interleaved CNT sheets improved the in-plane thermal conductivity of the hybrid composite laminates by about 400% and the electrical conductivity by about 3 orders of magnitude.

Kang, Jin Ho↗
NASA NTRS2014

Theoretical Development of an Orthotropic Elasto-Plastic Generalized Composite Material Model

The need for accurate material models to simulate the deformation, damage and failure of polymer matrix composites is becoming critical as these materials are gaining increased usage in the aerospace and automotive industries. While there are several composite material models currently available within LSDYNA (Livermore Software Technology Corporation), there are several features that have been identified that could improve the predictive capability of a composite model. To address these needs, a combined plasticity and damage model suitable for use with both solid and shell elements is being developed and is being implemented into LS-DYNA as MAT_213. A key feature of the improved material model is the use of tabulated stress-strain data in a variety of coordinate directions to fully define the stress-strain response of the material. To date, the model development efforts have focused on creating the plasticity portion of the model. The Tsai-Wu composite failure model has been generalized and extended to a strain-hardening based orthotropic yield function with a nonassociative flow rule. The coefficients of the yield function, and the stresses to be used in both the yield function and the flow rule, are computed based on the input stress-strain curves using the effective plastic strain as the tracking variable. The coefficients in the flow rule are computed based on the obtained stress-strain data. The developed material model is suitable for implementation within LS-DYNA for use in analyzing the nonlinear response of polymer composites.

Polymer Matrix Composites↗
NASA NTRS2014

Theoretical Development of an Orthotropic Elasto-Plastic Generalized Composite Material Model

The need for accurate material models to simulate the deformation, damage and failure of polymer matrix composites is becoming critical as these materials are gaining increased usage in the aerospace and automotive industries. While there are several composite material models currently available within LS-DYNA (Registered), there are several features that have been identified that could improve the predictive capability of a composite model. To address these needs, a combined plasticity and damage model suitable for use with both solid and shell elements is being developed and is being implemented into LS-DYNA as MAT_213. A key feature of the improved material model is the use of tabulated stress-strain data in a variety of coordinate directions to fully define the stress-strain response of the material. To date, the model development efforts have focused on creating the plasticity portion of the model. The Tsai-Wu composite failure model has been generalized and extended to a strain-hardening based orthotropic material model with a non-associative flow rule. The coefficients of the yield function, and the stresses to be used in both the yield function and the flow rule, are computed based on the input stress-strain curves using the effective plastic strain as the tracking variable. The coefficients in the flow rule are computed based on the obtained stress-strain data. The developed material model is suitable for implementation within LS-DYNA for use in analyzing the nonlinear response of polymer composites.

Plasticity↗
NASA NTRS1990

Interfacial effects on the behavior of partially bonded metal matrix composite properties

A novel computational method developed at NASA-Lewis in order to predict the behavior of unidirectional composites has been used to explore the effects of partial debonding and fiber fracture on the behavior of room temperature and high temperature metal-matrix composites. Attention is presently given to the influence of disbonding, which occurs with fractured fibers, on the ply properties of metal-matrix composites with orthotropic fibers, in the case of a graphite fiber-reinforced copper-matrix composite. It is shown that, for small amounts of partial bonding on fractured fibers, composite material properties are not significantly affected.

Caruso, J. J.↗
NASA NTRS1990

Extension of a noninteractive reliability model for ceramic matrix composites

Developments in the processing of high temperature ceramic composites demand innovative and progressive design protocols that adequately predict the thermal and mechanical behavior of these materials. The focus here is the extension of a reliability model for orthotropic ceramic composites. The approach chosen to describe failures leads to a noninteractive formulation of reliability that is phenomenological. This particular criterion, which was constructed using tensorial invariant theory, allows six potential failure modes to emerge.

Duffy, Stephen F.↗
NASA NTRS1986

Assessment of simplified composite micromechanics using three-dimensional finite-element analysis

Three-dimensional finite-element analyses are used to assess the accuracy of simplified composite micromechanics equations (SME) for hygral, thermal, and mechanical properties of unidirectional composites with orthotropic fibers. The properties predicted by the SME are in reasonably good agreement with those predicted by the three-dimensional finite-element analyses. This correlation demonstrates that the SME can be used with confidence in predicting the hygral, thermal, and mechanical behavior of unidirectional fiber composites.

Caruso, J. J.↗
NASA NTRS1993

Analyzing Stresses In Orthotropic Materials

Boundary Force Method for Orthotropic Materials (BOFFO) computer program performs stress analyses of two-dimensional, linearly elastic, orthotropic or composite bodies with or without cracks, by use of boundary-force method. Easy to use because only boundaries of region of interest modeled mathematically by use of built-in mesh generator. Stresses computed at any specified point in body. Solutions involving stress-intensity factors and strain-energy-release rates computed for both mode-l and mixed-mode fracture problems. Written in FORTRAN V.

Bigelow, Catherine A.↗
NASA NTRS2009

Simple Formulas and Results for Buckling-Resistance and Stiffness Design of Compression-Loaded Laminated-Composite Cylinders

Simple formulas for the buckling stress of homogeneous, specially orthotropic, laminated-composite cylinders are presented. The formulas are obtained by using nondimensional parameters and equations that facilitate general validation, and are validated against the exact solution for a wide range of cylinder geometries and laminate constructions. Results are presented that establish the ranges of the nondimensional parameters and coefficients used. General results, given in terms of the nondimensional parameters, are presented that encompass a wide range of geometries and laminate constructions. These general results also illustrate a wide spectrum of behavioral trends. Design-oriented results are also presented that provide a simple, clear indication of laminate composition on critical stress, critical strain, and axial stiffness. An example is provided to demonstrate the application of these results to thin-walled column designs.

Nemeth, Michael P.↗
NASA NTRS2005

Computational Simulation of Damage Propagation in Three-Dimensional Woven Composites

Three dimensional (3D) woven composites have demonstrated multi-directional properties and improved transverse strength, impact resistance, and shear characteristics. The objective of this research is to develop a new model for predicting the elastic constants, hygrothermal effects, thermomechanical response, and stress limits of 3D woven composites; and to develop a computational tool to facilitate the evaluation of 3D woven composite structures with regard to damage tolerance and durability. Fiber orientations of weave and braid patterns are defined with reference to composite structural coordinates. Orthotropic ply properties and stress limits computed via micromechanics are transformed to composite structural coordinates and integrated to obtain the 3D properties. The various stages of degradation, from damage initiation to collapse of structures, in the 3D woven structures are simulated for the first time. Three dimensional woven composite specimens with various woven patterns under different loading conditions, such as tension, compression, bending, and shear are simulated in the validation process of this research. Damage initiation, growth, accumulation, and propagation to fracture are included in these simulations.

Huang, Dade↗