Optical absorption and fluorescence studies in high pressure cesium-xenon mixtures
Explore the source record for details and available documents.
Eden, J. G.↗
SEARCH · Engineering Papers
Results for “Optical absorption”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The optical absorption of triatomic carbon C3 for the wavelength range 260 to 560 nm
The spectral absorption properties of C3 have been measured in a shock tube containing a test gas mixture of acetylene diluted with argon. The absorption of a pulsed xenon light source was measured by means of eight photomultiplier channels to a spectrograph and an accompanying drum camera. The postshock test gas temperature and pressure were varied over the range 3240 to 4300 K and 37 to 229 kPa, respectively. The results showed appreciable absorption by C3 for the wavelength range 300 to 540 nm. The various reported measurements of the heat of formation of C3 which are available in the open literature were reviewed, and a value of 198 kcal/mol is recommended. This value, along with best available values for other species, was used to calculate the number density of C3 for the conditions of the present experiments in order to compute absorption cross section or electronic oscillator strength. The computed electronic oscillator strength varied from a high of 0.062 at 3300 K to a low of 0.036 at 3900 K.
Jones, J. J.↗
Laser modulation of optical absorption in ZnSe
The possibility of producing and detecting laser induced modulation of absorption (LIMA) in ZnSe crystals using a moderate laser intensity of about 6 mw output was investigated. The modulation is smaller than that previously obtained with higher laser photon flux, but is not too difficult to detect. Modulation of the order of a few parts in 10 to the 5th power, up to one part in 10 to the 4th power appears typical at the present. LIMA pulse shapes were recorded with varying system resolutions at a half dozen wavelengths in the visible, from 4800 A to 6000 A. Detailed data were taken, particularly at 5000 A, for a range of time intervals following laser pulse turn-on. Quantitative study of the excitation and decay kinetics of these is underway, though analysis is not complete. Major features are discussed with attention centered upon the detailed measurements made most recently at 5000 A.
Major, R. W.↗
Optical absorption of carbon and hydrocarbon species from shock heated acetylene and methane in the 135-220 nm wavelength range
Absorption spectroscopy of carbon and hydrocarbon species has been performed in a shock tube at an incident shock condition for a wavelength range of 135-220 nm, in order to obtain information needed for calculating radiation blockage ahead of a planetary probe. Instrumentation consisted of high frequency response pressure transducers, thin-film heat transfer gages, or photomultipliers coupled by light pipes. Two test-gas mixtures, one with acetylene and the other with methane, both diluted with argon, were used to provide a reliable variation of C3 and C2H concentration ratio. Comparison of tests results of the two mixtures, in the temperature range of 3750 + or - 100 K, showed the main absorbing species to be C3. The wavelength for maximum absorption agrees well with the theoretical values of 7.68 eV and 8.03 eV for the vertical excitation energy, and a value of 0.90 for the electronic oscillator strength, obtained from the measured absorption band, is also in good agreement with the predicted value of 0.92.
Shinn, J. L.↗
Optical absorption coefficient and minority carrier diffusion length measurements in low-cost silicon solar cell material
Explore the source record for details and available documents.
Swimm, R. T.↗
Accurate determination of the vapor pressure of potassium using optical absorption
The vapor pressure of potassium has been measured in absorption using a CW tunable laser and calibrated against the accurate radiative lifetime of the 4s-4p doublet of potassium. An accurate value of 20,850 + or - 30 cal/mol for the heat of vaporization (from the liquid phase) at the melting point was determined.
Shirinzadeh, B.↗
Optical absorption from the high-velocity neutral hydrogen complex C in the spectrum of the RR Lyrae star BT Draconis
The detection of interstellar Na D absorption lines at a local standard of rest (LSR) velocity of -85 km/s is reported, together with tentative detections of further Na D lines at -133 km/s and -110 km/s, in the spectrum of the RR Lyrae star BT Draconis which lies toward the high-velocity neutral hydrogen complex C (LSR velocity around -115 km/s). This suggests an upper limit of 2.1 kpc on the distance to this high-velocity complex, and indicates that the complex has near-cosmic metallicity. This result strongly favors either a model in which complex C is formed by infalling material in the halo, which has originated in the Galactic disk, or one in which it is part of a large relatively local shell structure.
Songaila, A.↗
OH radical measurements by optical absorption spectroscopy
The long path absorption spectroscopy (LPA) measurement of OH utilizes the strong UV absorption spectrum of the molecule with well resolved rotational lines around 308 nm. The light source consists of an Ar ion laser pumped CW dye laser, the output of which is frequency doubled to emit a spectrally smooth light profile of 0.1 nm FWHM at 308 nm. This is considerably broader than the sharp (0.0018 nm wide) absorption features of OH and also wider than the total spectral region (0.06 nm) scanned around the OH lines. For field measurements a Cassegrain-type telescope expands the small diameter of the original laser beam by a factor of 50 to about a 0.25-m diameter in order to reduce the divergence of the beam as well as its mean photon flux density, thus reducing the maximum self-generated OH concentration to 40,000 cu. cm. The light is passed into the open atmosphere and reflected at about 5 km distance resulting in a 10-km light path length. A telescope focuses the returning light onto the entrance slit of a monochromator the single exit slit of which is replaced by a mechanical scanning device operating at a scan repetition rate of 6.6 KHz. For a typical measurement (1h duration) some 20,000,000 scans are averaged, rendering the contribution of atmospheric turbulence to the spectral noise negligible.
Platt, U.↗
Method and apparatus for determining optical absorption and emission characteristics of a crystal or non-crystalline fiber
This invention relates generally to spectroscopy and, more particularly, to a method and apparatus for performing spectroscopic analysis of crystal and noncrystalline fibers. The invention provides a complete absorption curve for a material using a crystal fiber which can be more easily produced than the types of samples required for other methods of obtaining substantially the same absorption curve for identical materials.
Byvik, Charles E.↗
Distances to diffuse interstellar clouds from IRAS measurements and observations of optical absorption lines
Distances to diffuse interstellar clouds were determined from the amount of ultraviolet radiation that penetrates into the cloud and that arises from a nearby B star. The environment around 67 Ophiuchi, 20 Aquilae, kappa Aquilae, and 9 Cephei were studied. The intensities at 60 and 100 micron, as measured by IRAS, were used to derive dust temperatures for the clouds. Enhanced dust temperatures would indicate an influence of the star's radiation field on a cloud. Observation of molecular absorption were compared to the results of simplified chemical models in order to search for enhanced photodissociation that is caused by the star. Enhanced dust temperatures were observed for clouds in the vicinities of 20 Aql, kappa Agl, and 9 Cep. The range of the star's influence was found to be typically 1-5 pc. On the other hand, chemical analyses of the molecular data, which pertain to foreground gas, did not reveal the presence of enhanced dissociative flux from the sample of stars. Thus, upper limits were derived for the distances from the sun to the foreground material.
Federman, S. R.↗
Analysis of the red and green optical absorption spectrum of gas phase ammonia
Explore the source record for details and available documents.
Nikolai F. Zobov↗
Influence of refractive index and solar concentration on optical power absorption in slabs
The optical power absorbed by a slab at the focus of a parabolic dish concentrator is calculated. The calculations are plotted versus maximum angle of incidence of irradiation (which corresponds to solar concentration) with absorption coefficient as a parameter for several different indices of refraction that represent real materials.
Williams, M. D.↗
Optical interstellar absorption lines toward 29 stars
Observations of optical interstellar absorption lines of Ti II, Ca II, and/or Na I acquired at an instrumental resolution typically of 5.6 km/s are reported for 29 stars. The data were recorded primarily with a Digicon detector and achieve 2 sigma detection limits generally near an equivalent width of 1 mA. The primary purpose of the observations is, in combination with previously published data, to provide a comprehensive, high-sensitivity survey of Ti II, Ca II, and Na I absorption at all velocities, toward 41 stars for which a correspondingly complete survey of certain ultraviolet interstellar lines also is available. New high-velocity optical interstellar lines at /v(LSR)/ greater than about 25 km/s are found toward four of the 29 stars.
Hobbs, L. M.↗
Empirical relation between interstellar X-ray absorption and optical extinction
An empirical relation between interstellar X-ray absorption and optical extinction is derived from the correlation of measurements made on objects of large intrinsic diameter. The result is Av = 4.5 times 10 to the -22nd power N(H) mag, with the principal error being largely systematic in origin, where N(H) represents the column density of interstellar matter in the Brown and Gould model for the X-ray absorption coefficient. Applying this ratio to optically identified compact sources, it is concluded that sources in binary systems showing pronounced X-ray occultations have an intrinsic absorption equivalent to about 10 to the 22-nd power atoms per sq cm of interstellar matter and that there are a few compact sources where the absorption seems to be primarily interstellar in origin. The interstellar absorption expected in Cyg X-1 from the extinction of its optical counterpart is much greater than that suggested by X-ray spectra, which may be due to a soft X-ray component greater than that predicted by the power law fitted to higher energy data.
Gorenstein, P.↗
Enhanced Reverse Saturable Absorption and Optical Limiting in Heavy-Atom Substituted Phthalocyanines
The reverse saturable absorption and optical limiting response of metal phthalocyaninies can be enhanced by using the heavy-atom effect. Phthalocyanines containing heavy metal atoms, such as In, Sn, and Pb show nearly a factor of two enhancement in the ratio of effective excited-state to ground-state absorption cross sections compared to those containing lighter atoms, such as Al and Si. In an f/8 optical geometry, homogeneous solutions of heavy metal phthalocyanines, at 30% linear transmission, limit 8-ns, 532-nm laser pulses to less than or equal to 3 (micro)J (the energy for 50% probability of eye damage) for incident pulses up to 800 (micro)J.
metal phthalocyanines↗
Optically induced absorption modulation in a periodically delta-doped InGaAs/GaAs multiple quantum well structure
Strong optically induced absorption modulation has been achieved in a periodically delta-doped InGaAs/GaAs multiple quantum well structure. The use of delta-doping has enabled efficient modulation in short-period structures using a low-power semiconductor laser. With an excitation intensity of 100 mW/sq cm an absolute quantum well absorption change of more than 9000 cm has been measured corresponding to a differential absorption change as high as 58 percent at the excitonic resonance.
Larsson, A.↗
Optically controlled absorption modulator based on state filling of In(x)Ga(1-x)As/GaAs quantum wells
The first demonstration of an optically controlled absorption modulator based on state filling in a periodically doped In(x)Ga(1-x)As/GaAs multiple quantum well structure is reported. Differential absorption of approximately 10,000/cm is observed in the quantum wells of the test structure at saturation pump powers. Photoluminescence and time-resolved modulation measurements confirm the predicted behavior of carrier recombination and give a measure of enhanced carrier lifetime of approximately 1 ms. These initial results show the potential for developing these structures into optically addressed spatial light modulators.
Iannelli, J. M.↗
Chirality Characterization of Dispersed Single Wall Carbon Nanotubes
Raman scattering and optical absorption spectroscopy are used for the chirality characterization of HiPco single wall carbon nanotubes (SWNTs) dispersed in aqueous solution with the surfactant sodium dodecylbenzene sulfonate. Radial breathing mode (RBM) Raman peaks for semiconducting and metallic SWNTs are identified by directly comparing the Raman spectra with the Kataura plot. The SWNT diameters are calculated from these resonant peak positions. Next, a list of (n, m) pairs, yielding the SWNT diameters within a few percent of that obtained from each resonant peak position, is established. The interband transition energies for the list of SWNT (n, m) pairs are calculated based on the tight binding energy expression for each list of the (n, m) pairs, and the pairs yielding the closest values to the corresponding experimental optical absorption peaks are selected. The results reveal that (1, 11), (4, 11), and (0, 11) as the most probable chiralities of the semiconducting nanotubes. The results also reveal that (4, 16), (6, 12) and (8, 8) are the most probable chiralities for the metallic nanotubes. Directly relating the Raman scattering data to the optical absorption spectra, the present method is considered the simplest technique currently available. Another advantage of this technique is the use of the E(sup 8)(sub 11) peaks in the optical absorption spectrum in the analysis to enhance the accuracy in the results.
Namkung, Min↗