Results for “Operational Flexibility” — Page 3

NASA NTRS2012

Spacesuit Portable Life Support System Breadboard (PLSS 1.0) Development and Test Results

A multi-year effort has been carried out at the Johnson Space Center to develop an advanced EVA PLSS design intended to further the current state of the art by increasing operational flexibility, reducing consumables, and increasing robustness. This multi-year effort has culminated in the construction and operation of PLSS 1.0, a test rig that simulates full functionality of the advanced PLSS design. PLSS 1.0 integrates commercial off-the-shelf hardware with prototype technology development components, including the primary and secondary oxygen regulators, ventilation loop fan, Rapid Cycle Amine (RCA) swingbed, and Spacesuit Water Membrane Evaporator (SWME). PLSS 1.0 was tested from June 17th through September 30th, 2011. Testing accumulated 233 hours over 45 days, while executing 119 test points. An additional 164 hours of operational time were accrued during the test series, bringing the total operational time for PLSS 1.0 testing to 397 hours. Specific PLSS 1.0 test objectives assessed during this testing include: (1) Confirming prototype components perform in a system level test as they have performed during component level testing, (2) Identifying unexpected system-level interactions (3) Operating PLSS 1.0 in nominal steady-state EVA modes to baseline subsystem performance with respect to metabolic rate, ventilation loop pressure and flow rate, and environmental conditions (4) Simulating nominal transient EVA operational scenarios (5) Simulating contingency EVA operational scenarios (6) Further evaluating prototype technology development components Successful testing of the PLSS 1.0 provided a large database of test results that characterize system level and component performance. With the exception of several minor anomalies, the PLSS 1.0 test rig performed as expected. Documented anomalies and observations include: (1) Ventilation loop fan controller issues at high fan speeds (near 70,000 rpm, whereas the fan speed during nominal operations would be closer to 35,000 rpm) (2) RCA performance at boundary conditions, including carbon dioxide and water vapor saturation events, as well as reduced vacuum quality (3) SWME valve anomalies (4 documented cases where the SWME failed to respond to a control signal or physically jammed, preventing SWME control) (4) Reduction of SWME hollow fiber hydrophobicity and significant reduction of the SWME degassing capability after significant accumulated test time.

Watts, Carly A.↗

NASA NTRS1991

What we were asked to do

Recommendations are made after 32 interviews, lesson identification, lesson analysis, and mission characteristics identification. The major recommendations are as follows: (1) to develop end-to-end planning and scheduling operations concepts by mission class and to ensure their consideration in system life cycle documentation; (2) to create an organizational infrastructure at the Code 500 level, supported by a Directorate level steering committee with project representation, responsible for systems engineering of end-to-end planning and scheduling systems; (3) to develop and refine mission capabilities to assess impacts of early mission design decisions on planning and scheduling; and (4) to emphasize operational flexibility in the development of the Advanced Space Network, other institutional resources, external (e.g., project) capabilities and resources, operational software and support tools.

Source record↗

NASA NTRS2011

Hybrid Power Management-Based Vehicle Architecture

Hybrid Power Management (HPM) is the integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications (s ee figure). The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The basic vehicle architecture consists of a primary power source, and possibly other power sources, that provides all power to a common energy storage system that is used to power the drive motors and vehicle accessory systems. This architecture also provides power as an emergency power system. Each component is independent, permitting it to be optimized for its intended purpose. The key element of HPM is the energy storage system. All generated power is sent to the energy storage system, and all loads derive their power from that system. This can significantly reduce the power requirement of the primary power source, while increasing the vehicle reliability. Ultracapacitors are ideal for an HPM-based energy storage system due to their exceptionally long cycle life, high reliability, high efficiency, high power density, and excellent low-temperature performance. Multiple power sources and multiple loads are easily incorporated into an HPM-based vehicle. A gas turbine is a good primary power source because of its high efficiency, high power density, long life, high reliability, and ability to operate on a wide range of fuels. An HPM controller maintains optimal control over each vehicle component. This flexible operating system can be applied to all vehicles to considerably improve vehicle efficiency, reliability, safety, security, and performance. The HPM-based vehicle architecture has many advantages over conventional vehicle architectures. Ultracapacitors have a much longer cycle life than batteries, which greatly improves system reliability, reduces life-of-system costs, and reduces environmental impact as ultracapacitors will probably never need to be replaced and disposed of. The environmentally safe ultracapacitor components reduce disposal concerns, and their recyclable nature reduces the environmental impact. High ultracapacitor power density provides high power during surges, and the ability to absorb high power during recharging. Ultracapacitors are extremely efficient in capturing recharging energy, are rugged, reliable, maintenance-free, have excellent lowtemperature characteristic, provide consistent performance over time, and promote safety as they can be left indefinitely in a safe, discharged state whereas batteries cannot.

Eichenberg, Dennis J.↗

NASA NTRSDate not supplied

Airspace Research and Development Portfolio Assessment of Urban Air Mobility using Knowledge Graph Data Science

National Aeronautics and Space Administration (NASA) is spearheading an innovative digital engineering approach to integrate, communicate, and facilitate the research of Urban Air Mobility (UAM) operations. The UAM vision is one in which advanced technologies and new operational procedures enable practical and cost-effective air transport as an integrated mode of movement of people and goods throughout metropolitan areas. To safely support UAM operations at scale in the National Airspace System (NAS), NASA’s Air Traffic Management-Exploration (ATM-X) project has been conducting research that evolves the UAM air traffic management system towards a highly automated and operationally flexible system of the future. The complexity of UAM airspace evolution to accommodate the increasing tempo of UAM operations over time is managed through the UAM airspace research roadmap, which is a system engineering approach to the R&D of complex system-of-systems, where system’s interdependencies make it nearly impossible to define requirements for individual elements of the system in isolation. These interdependencies form a knowledge graph (node-link network) with a highly complex structure far beyond the human user’s ability to extract insights for project management’s research portfolio assessment. This study applies advanced data analytics in knowledge graph to the UAM knowledge graph to facilitate the portfolio assessment.

ATM↗

NASA NTRSDate not supplied

Airspace Research and Development Portfolio Assessment of Urban Air Mobility using Knowledge Graph Data Science

National Aeronautics and Space Administration (NASA) is spearheading an innovative digital engineering approach to integrate, communicate, and facilitate the research of Urban Air Mobility (UAM) operations. The UAM vision is one in which advanced technologies and new operational procedures enable practical and cost-effective air transport as an integrated mode of movement of people and goods throughout metropolitan areas. To safely support UAM operations at scale in the National Airspace System (NAS), NASA’s Air Traffic Management-Exploration (ATM-X) project has been conducting research that evolves the UAM air traffic management system towards a highly automated and operationally flexible system of the future. The complexity of UAM airspace evolution to accommodate the increasing tempo of UAM operations over time is managed through the UAM airspace research roadmap, which is a system engineering approach to the R&D of complex system-of-systems, where system’s interdependencies make it nearly impossible to define requirements for individual elements of the system in isolation. These interdependencies form a knowledge graph (node-link network) with a highly complex structure far beyond the human user’s ability to extract insights for project management’s research portfolio assessment. This study applies advanced data analytics in knowledge graph to the UAM knowledge graph to facilitate the portfolio assessment.

ATM↗

NASA NTRS1990

Microwave beam powered Mars airplane

The feasibility of an unmanned Mars airplane that receives its primary power from an RF (microwave) beam located on the Martian surface has been analyzed. An onboard rechargeable electrochemical storage system is to be used for special maneuvers, and possible range extension when the airplane is out of the line-of-sight of the microwave source antenna is included as a back-up to the microwave system. The weight of the onboard microwave beam receiving system, relative to other power systems, and the ability to recharge the onboard energy storage system in flight result in a payload capability independent of range and significant mission flexibility. Such an airplane, its onboard power system, its methods of utilization, and the transmitting station requirements to support various Martian exploration operations are presented. The status of microwave beam technology is given, in addition to the technology advances required for the microwave-beam-powered Mars airplane. The concept is thought to be feasible, but advances in microwave technology are required. It is concluded that the payload capability gives the Mars airplane significant operational flexibility and utilization.

Faymon, Karl A.↗

NASA NTRS2000

Terra Flexible Blanket Solar Array Deployment, On-Orbit Performance and Future Applications

The Terra spacecraft (formerly identified as EOS AM1) is the flagship in a planned series of NASA/GSFC (Goddard Space Flight Center) Earth observing system satellites designed to provide information on the health of the Earth's land, oceans, air, ice, and life as a total ecological global system. It has been successfully performing its mission since a late-December 1999 launch into a 705 km polar orbit. The spacecraft is powered by a single wing, flexible blanket array using single junction (SJ) gallium arsenide/germanium (GaAs/Ge) solar cells sized to provide five year end-of-life (EOL) power of greater than 5000 watts at 127 volts. It is currently the highest voltage and power operational flexible blanket array with GaAs/Ge cells. This paper briefly describes the wing design as a basis for discussing the operation of the electronics and mechanisms used to achieve successful on-orbit deployment. Its orbital electrical performance to date will be presented and compared to analytical predictions based on ground qualification testing. The paper concludes with a brief section on future applications and performance trends using advanced multi-junction cells and weight-efficient mechanical components.

Kurland, Richard↗

NASA NTRS2000

Terra Flexible Blanket Solar Array Deployment, On-Orbit Performance and Future Applications

The Terra spacecraft (formerly identified as EOS AM1) is the flagship in a planned series of NASA/GSFC (Goddard Space Flight Center) Earth observing system satellites designed to provide information on the health of the Earth's land, oceans, air, ice, and life as a total ecological global system. It has been successfully performing its mission since a late-December 1999 launch into a 705 km polar orbit. The spacecraft is powered by a single wing, flexible blanket array using single junction (SJ) gallium arsenide/germanium (GaAs/Ge) solar cells sized to provide five year end-of-life (EOL) power of greater than 5000 watts at 127 volts. It is currently the highest voltage and power operational flexible blanket array with GaAs/Ge cells. This paper briefly describes the wing design as a basis for discussing the operation of the electronics and mechanisms used to achieve successful on-orbit deployment. Its orbital electrical performance to date will be presented and compared to analytical predictions based on ground qualification testing. The paper concludes with a brief section on future applications and performance trends using advanced multi-junction cells and weight-efficient mechanical components. A viewgraph presentation is attached that outlines the same information as the paper and includes more images of the Terra Spacecraft and its components.

Kurland, Richard↗

NASA NTRS1993

Advanced propulsion engine assessment based on a cermet reactor

A preferred Pratt & Whitney conceptual Nuclear Thermal Rocket Engine (NTRE) has been designed based on the fundamental NASA priorities of safety, reliability, cost, and performance. The basic philosophy underlying the design of the XNR2000 is the utilization of the most reliable form of ultrahigh temperature nuclear fuel and development of a core configuration which is optimized for uniform power distribution, operational flexibility, power maneuverability, weight, and robustness. The P&W NTRE system employs a fast spectrum, cermet fueled reactor configured in an expander cycle to ensure maximum operational safety. The cermet fuel form provides retention of fuel and fission products as well as high strength. A high level of confidence is provided by benchmark analysis and independent evaluations.

Parsley, Randy C.↗

NASA NTRS1984

The NASA broad specification fuels combustion technology program at Pratt and Whitney

The technology required to accommodate the use of broadened properties fuels in commercial aircraft engine combustors with minimum impact on the emissions, performance, durability and engine operational characteristics is discussed. Emphasis was placed on defining the potential for reducing the fuel sensitivity of the reference combustion system through design refinements and the introduction of more advanced technology combustors. To this end the tests conducted included the evaluation of variations of three different combustor concepts representing progressively more advanced technology levels. It was demonstrated that reduced fuel hydrogen content has adverse impacts on current single stage combustors; the best opportunities for reducing the fuel sensitivity of these combustors are through improved fuel injectors and advanced liner cooling and structural concepts and that the advanced technology staged and variable geometry combustor concepts have inherent operational flexibility that can be exploited to accommodate changes in fuel composition. Also, advanced technology combustor concepts were evaluated. A variable geometry combustor capable of airflow modulation during operation and a new concept which is a further evolution of the Vorbix combustor are discussed.

Lohmann, R. P.↗

NASA NTRS1986

The Earth Radiation Budget Experiment nonscanner instrument

Two Earth Radiation Budget Experiment (ERBE) nonscanner instruments are flying with companion scanner instruments to measure the earth's energy budget from low earth orbit. A third set of instruments will be launched in March 1986. This program is the first designed to make a comprehensive set of highly accurate measurements of the earth's energy budget on the spectral, spatial, and temporal scales specified by the scientific community for use in climatological research. The ERBE nonscanner combines the use of the highly accurate active cavity radiometer (ACR) detector with a comprehensive preflight calibration and characterization program and a design which includes operational flexibility and in-flight calibration checks to achieve and maintain, throughout its 2-year design life, a measurement accuracy capability not previously possible. This paper describes the ERBE nonscanner instrument, its operation, calibration, and mission profile.

Luther, M. R.↗

NASA NTRS1987

An overview of the Hubble Space Telescope command and data management system

The Hubble Space Telescope (HST) will be an orbiting observatory which will extend the capability of large earth-based observatories to view the universe by approximately 350 times in volume and approximately seven times in distance. The HST program, which includes the Orbiting Observatory, the Space Telescope Science Institute, and the Space Telescope Operations Control Center, is supported by the Space Shuttle, the Tracking and Data Relay Satellite System, and the NASA Communications Network. This paper describes the Command and Data Management System for the HST spacecraft, including flexibility, operation modes, and end-to-end data flow paths used to meet stringent synchronization and data quality requirements. The results of system tests indicate that the use of concatenated coding techiques consisting of both block and convolutional codes as a protection against random and burst errors has been successful. Diagrams of the HST data system are included.

Clubb, Jerry↗

NASA NTRS1993

Spaceflight Radiation Health program at the Lyndon B. Johnson Space Center

The Johnson Space Center leads the research and development activities that address the health effects of space radiation exposure to astronaut crews. Increased knowledge of the composition of the environment and of the biological effects of space radiation is required to assess health risks to astronaut crews. The activities at the Johnson Space Center range from quantification of astronaut exposures to fundamental research into the biological effects resulting from exposure to high energy particle radiation. The Spaceflight Radiation Health Program seeks to balance the requirements for operational flexibility with the requirement to minimize crew radiation exposures. The components of the space radiation environment are characterized. Current and future radiation monitoring instrumentation is described. Radiation health risk activities are described for current Shuttle operations and for research development program activities to shape future analysis of health risk.

Johnson, A. Steve↗

NASA NTRS2003

Flywheels Upgraded for Systems Research

With the advent of high-strength composite materials and microelectronics, flywheels are becoming attractive as a means of storing electrical energy. In addition to the high energy density that flywheels provide, other advantages over conventional electrochemical batteries include long life, high reliability, high efficiency, greater operational flexibility, and higher depths of discharge. High pulse energy is another capability that flywheels can provide. These attributes are favorable for satellites as well as terrestrial energy storage applications. In addition to energy storage for satellites, the several flywheels operating concurrently can provide attitude control, thus combine two functions into one system. This translates into significant weight savings. The NASA Glenn Research Center is involved in the development of this technology for space and terrestrial applications. Glenn is well suited for this research because of its world-class expertise in power electronics design, rotor dynamics, composite material research, magnetic bearings, and motor design and control. Several Glenn organizations are working together on this program. The Structural Mechanics and Dynamics Branch is providing magnetic bearing, controls, and mechanical engineering skills. It is working with the Electrical Systems Development Branch, which has expertise in motors and generators, controls, and avionics systems. Facility support is being provided by the Space Electronic Test Engineering Branch, and the program is being managed by the Space Flight Project Branch. NASA is funding an Aerospace Flywheel Technology Development Program to design, fabricate, and test the Attitude Control/Energy Storage Experiment (ACESE). Two flywheels will be integrated onto a single power bus and run simultaneously to demonstrate a combined energy storage and 1-degree-of-freedom momentum control system. An algorithm that independently regulates direct-current bus voltage and net torque output will be experimentally demonstrated.

Jansen, Ralph H.↗

NASA NTRS2006

Anomaly Recovery and the Mars Exploration Rovers

The premise of the design of operations for the Mars Exploration Rovers (MER) is that the vehicles will drive each day. As a result, they will encounter some aspect of the terrain environment that cannot be anticipated or otherwise accommodated by the sequences linked onboard that day. The operations team then must correct the problem by planning then commanding the execution of a different drive the next day. Often other aspects of the operation on the surface of Mars: environmental changes, component degradation, errors in sequence design or execution, etc., lead to anomalies which must be addressed before normal operations can resume. The operational design that makes it possible to recover from a driving error each day also reduces the time needed to recover from anomalies. As an example of the efficiency achieved, less than 5% (about 30 sols out of 700 sols of operations) of the time on the surface has been devoted to recovery from anomalies for each vehicle. In this paper the major anomalies experienced by the MER rovers will be recounted and the streamlined approaches to addressing these problems described. The operational flexibility developed for these missions is also a function of the system design that anticipated a number of likely faults and conditions arising from uncertainty in sequence execution and environmental change. This design will be described as well as the considerations in operation that motivated this design. These considerations will likely be present in any future surface mission.

rovers↗

NASA NTRS1987

User interface and operational issues with thermionic space power systems

Thermionic space power systems have unique features which facilitate predeployment operations, provide operational flexibility and simplify the interface with the user. These were studied in some detail during the SP-100 program from 1983 to 1985. Three examples are reviewed in this paper: (1) system readiness verification in the prelaunch phase; (2) startup, shutdown, and dormancy in the operations phase; (3) part-load operation in the operations phase.

Dahlberg, R. C.↗

NASA NTRSDate not supplied

Digital Assistance for System Requirement Discovery and Analysis using Machine Learning Natural Language Processing Algorithm

NASA’s Air Traffic Management-Exploration (ATM-X) Urban Air Mobility (UAM) Airspace Subproject is conducting research that evolves UAM airspace towards a highly automated and operationally flexible system of the future (see https://www.nasa.gov/uam-overview/ for more information). The complexity of UAM airspace, and its evolution through a series of transformative epochs, requires a planning tool to effectively organize, integrate, and communicate the research that will guide the evolution of UAM operations in the National Airspace System (NAS). The planning tool, called the UAM airspace research roadmap (or just roadmap), is being developed as a new system engineering methodology leveraging model based system engineering (MBSE) and machine learning natural language processing (ML NLP, or just NLP) capabilities. This presentation gives an overview of the NLP application within this system engineering methodology and will describe how it is being used to meet the ATM-X UAM Airspace Subproject’s overarching research goals.

ATM↗

NASA NTRSDate not supplied

Requirement Discovery Using Embedded Knowledge Graph with ChatGPT

- NASA’s Air Traffic Management-Exploration (ATM-X) Urban Air Mobility (UAM) Airspace Subproject is conducting research that evolves UAM airspace towards a highly automated and operationally flexible system of the future. - (see https://www.nasa.gov/uam-overview/ for more information) - The complexity of UAM airspace, and its evolution through a series of transformative epochs, requires a planning tool to effectively organize, integrate, and communicate the research that will guide the evolution of UAM operations in the National Airspace System (NAS). - The planning tool, called the UAM airspace research roadmap (or just roadmap), is being developed as a new system engineering methodology leveraging model based system engineering (MBSE) and artificial intelligence capabilities. This presentation gives an overview of the Knowledge Graph and ChatGPT applications within this system engineering methodology and will describe how it is being used to meet the ATM-X UAM Airspace Subproject’s overarching research goals.

systems engineering↗