SEARCH · Engineering Papers
Results for “ORR”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Bypassing Formation of Oxide Intermediate via Chemical Vapor Deposition for the Synthesis of an Mn-N-C Catalyst with Improved ORR Activity
Not Available
Descriptor: High Temporal Resolution Meteorological Data at Oak Ridge Reservation (ORR-HiResMet)
Access to continuous, quality assessed meteorological data is critical for understanding the climatology and atmospheric dynamics of a region. Research facilities like Oak Ridge National Laboratory (ORNL) rely on such data to assess site-specific climatology, model potential emissions, establish safety baselines, and prepare for emergency scenarios. To meet these needs, on-site towers at ORNL collect meteorological data at 15-minute and hourly intervals. However, data measurements from meteorological towers are affected by sensor sensitivity, degradation, lightning strikes, power fluctuations, glitching, and sensor failures, all of which can affect data quality. To address these challenges, we conducted a comprehensive quality assessment and processing of five years of meteorological data collected from ORNL at 15-minute intervals, including measurements of temperature, pressure, humidity, wind, and solar radiation. The time series of each variable was pre-processed and gap-filled using established meteorological data collection and cleaning techniques, i.e., the time series were subjected to structural standardization, data integrity testing, automated and manual outlier detection, and gap-filling. The data product and highly generalizable processing workflow developed in Python Jupyter notebooks are publicly accessible online. As a key contribution of this study, the evaluated 5-year data will be used to train atmospheric dispersion models that simulate dispersion dynamics across the complex ridge-and-valley topography of the Oak Ridge Reservation in East Tennessee.
Stability of Atomically Dispersed Fe–N–C ORR Catalyst in Polymer Electrolyte Fuel Cell Environment
We have investigated the durability of a platinum group metal (PGM-)free Fe–N–C catalyst in which the Fe sites are atomically dispersed (AD), and found it to be quite stable in standard accelerated stress test (AST) cycles normally used for low-PGM catalysts: a square wave with 0.6 V lower potential limit (LPL)—0.95 V upper potential limit (UPL) with 3-s holds at UPL and LPL in H 2 /N 2 , at 1.5 atm, 80 °C and 100% RH. Considering the metrics normally employed to characterize the durability of the low-PGM catalysts after 30,000 AST cycles, this PGM-free catalyst lost <50% catalyst activity, <50% H 2 /air performance at 0.8 V, and 40 mV at 1.5 A cm -2 . However, it is less stable in H 2 /air, losing ~50% catalyst activity after just 7.5 h of polarization measurements (load cycles). In combined cycles, the majority of the loss in catalyst activity occurred during the load cycles in H 2 /air rather than AST cycles in H 2 /N 2 . We have concluded that, unlike low-PGM catalysts that lose electrochemically active surface area (ECSA) through potential cycling-induced processes, (AD)Fe–N–C catalysts degrade by processes associated with the presence of oxygen.
ORR Strain Sensor as Potential Detector for HEP
Slides describing the student's work during his internship as well as broader context for how it fits within the broader scientific program of developing optical ring resonator strain sensors for particle detection.
Complete Genome of ORR Isolate Bacillus cereus CPT56D-587-MTF
Bacillus cereus strain CPT56D-587-MTF (also referred to as CPTF) was isolated from a nitrate and heavy-metal contaminated site at the Oak Ridge Field Research Center (ORFRC) in Oak Ridge, Tennessee, USA. Strain CPTF has 100% 16S rRNA gene identity to the most abundant metagenome 16S v4 region amplicon sequence variant (ASV) in the soils of the highly contaminated Area 3, the site immediately adjacent to the contamination source: the former S-3 ponds.
The continuous spectrum of the Orr-Sommerfeld equation. II - Eigenfunction expansions
Explore the source record for details and available documents.
Durability of PGM-Free ORR Catalysts: Recent Progress
Explore the source record for details and available documents.
Understanding the ORR Electrocatalysis on Co-Mn Oxides
Explore the source record for details and available documents.
Effect of Ammonia on the Electrocatalysis of Oxygen Reduction Reaction in Base
We investigated the effect of ammonia on the activity of seven benchmark oxygen reduction reaction (ORR) electrocatalysts, Pt/C, Pd/C, Au/C, Ag/C, commercial Fe–N–C, zeolitic imidazolate framework (ZIF)-based Fe–N–C (Fe-ZIF), and ZIF-based Fe,Co–N–C (Fe,Co-ZIF) in alkaline media and direct ammonia fuel cell (DAFC) relevant conditions using a rotating disk electrode. We found that ammonia exposure causes considerable ORR activity loss for all studied electrocatalysts. Should we rank the electrocatalysts in terms of their ORR activity loss and their irreversible ORR activity loss as the result of exposure to ammonia (from the highest loss to the lowest loss), we get Au/C > Pt/C ≈ Pd/C > Ag/C » commercial Fe–N–C > Fe-ZIF ≈ Fe,Co-ZIF and Pd/C > Au/C > Ag/C > commercial Fe–N–C > Fe-ZIF ≈ Fe,Co-ZIF > Pt/C, respectively. The ammonia oxidation reaction activity and adsorptive properties of the Gerisher-Mauerer reaction intermediates do not govern the trend of the ORR activity loss of Pt/C, Pd/C, Au/C, and Ag/C electrocatalysts. Notably, we found that Pt/C electrocatalyst shows the lowest irreversible ORR activity loss, while Fe-ZIF and Fe,Co-ZIF electrocatalysts show the lowest overall ORR activity loss. Our comprehensive study suggests that Pt-based, Fe-ZIF, and Fe,Co-ZIF electrocatalysts are promising cathode candidates for future DAFCs.
Single-Walled Carbon Nanotubes with Confined Chalcogens as the Catalysts and Electrodes for Oxygen Reduction Reaction in Fuel Cells
The goal of this project is to synthesize and characterize a new non-metal electro-catalyst for oxygen reduction reaction (ORR) for fuel cell applications. The intended catalyst is a composite material composed of sulfur chains encapsulated in narrow diameter single-walled carbon nanotubes (S@SWNTs). S@SWNTs were successfully synthesized through sulfur vapor infusion method, and validated with Raman spectroscopy. However, the electrochemical analysis on the ORR catalytic activity of S@SWNTs indicated that it had low ORR catalytic activity. Our theoretical study based on density functional theory (DFT) revealed that the poor oxygen adsorption (low binding energy) on the surface of S@SWNTs was the bottleneck of the entire catalytic reaction. The focus of the project was subsequently pivoted to the development of a new non-noble metal ORR catalyst that could provide durability in acidic electrolyte. The hypothesis was to encapsulate small iron (Fe) clusters in SWNTs (Fe@SWNTs) can provide ORR electro-catalytic activity and long durability in acidic environment. DFT-based computational studies were carried out to explore the feasibility of the Fe@SWNTs catalyst. The theoretical study indicated that Fe@SWNTs indeed could catalyze the ORR with lower theoretical overpotential than platinum (Pt). However, its weaker bonding energy with oxygen was the bottleneck of the overall reaction. On the other hand, Fe clusters (composed of 7 Fe atoms) encapsulated in nitrogen-doped SWNTs (Fe 7 @N 4 WSNTs) showed proper oxygen adsorption by the Fe cluster and low theoretical overpotential of ORR. Comparing to the Fe single atom catalyst on N-doped SWNTs (Fe-N 4 SWNTs), which is one the best non-noble metal ORR catalysts reported in the literature, the Fe 7 @N 4 WSNTs showed lower overpotential and better resistance to acidic environment. Fe encapsulated N-doped SWNTs were synthesized with ferrocene as the Fe precursors through vapor infusion method, and experimental validate is underway. This study theoretically demonstrated the feasibility of a new type of non-noble metal electro-catalyst for ORR that could have high catalytic activity and long durability.
Identification of Active Sites of Pure and Nitrogen-Doped Carbon Materials for Oxygen Reduction Reaction Using Constant-Potential Calculations
Nitrogen-doped carbon materials are promising metal-free catalysts for the electrochemical oxygen reduction reaction (ORR). A better theoretical understanding on the nature of the active site(s) would help further optimization of their ORR activity. Although quantum mechanical calculations have been widely employed to elucidate the active sites over various catalysts, these calculations are typically done assuming constantcharge conditions rather than the experimentally relevant constant-potential conditions. In this study, we employ the double-reference method to simulate the energetics of the ORR over pure and N-doped carbon materials under constant-potential conditions. We demonstrate that constant-potential calculations enable more accurate theoretical predictions, comparing well with existing experiments. Our key findings are (1) the zigzag edge of pure graphite is highly active for ORR, (2) the pyridinic N-doped armchair edge is highly active for ORR in alkaline media but not in acid, and (3) graphitic N can donate electrons to pyridinic N to enhance the ORR activity. Furthermore, these fundamental insights provide guidelines for the design of better carbonbased ORR catalysts.
Improved Rate for the Oxygen Reduction Reaction in a Sulfuric Acid Electrolyte using a Pt(111) Surface Modified with Melamine
The feasible commercialization of alkaline, phosphoric acid and polymer electrolyte membrane fuel cells depends on the development of oxygen reduction reaction (ORR) electrocatalysts with improved activity, stability, and selectivity. The rational design of surfaces to ensure these improved ORR catalytic requirements relies on the so-called "descriptors" (e.g., the role of covalent and noncovalent interactions on platinum surface active sites for ORR). Here, we demonstrate that through the molecular adsorption of melamine onto the Pt(111) surface [Pt(111)-M ad ], the activity can be improved by a factor of 20 compared to bare Pt(111) for the ORR in a strongly adsorbing sulfuric acid solution. Additionally, the M ad moieties act as "surface-blocking bodies," selectively hindering the adsorption of (bi)sulfate anions (well-known poisoning spectator of the Pt(111) active sites) while the ORR is unhindered. This modified surface is further demonstrated to exhibit improved chemical stability relative to Pt(111) patterned with cyanide species (CN ad ), previously shown by our group to have a similar ORR activity increase compared to bare Pt(111) in a sulfuric acid electrolyte, with Pt(111)-M ad retaining a greater than ninefold higher ORR activity relative to bare Pt(111) after extensive potential cycling as compared to a greater than threefold higher activity retained on a CN ad -covered Pt(111) surface. We suggest that the higher stability of the Pt(111)-M ad interface stems from melamine's ability to form intermolecular hydrogen bonds, which effectively turns the melamine molecules into larger macromolecular entities with multiple anchoring sites and thus more difficult to remove.
High-Temperature Rotating Disk Electrode Study of Platinum Bimetallic Catalysts in Phosphoric Acid
Understanding the H 3 PO 4 effect on the catalyst’s activity under a relevant condition is important for high-temperature polymer electrolyte membrane fuel cell (HT-PEMFC) catalyst research. Here, we report a high-temperature rotating disk electrode (HT-RDE) study of oxygen reduction reaction (ORR) in H 3 PO 4 . With the regular electrochemical protocol, we found that H 3 PO 4 reduction could occur during cyclic voltammetry study and form a reductive species—phosphorus acid (H 3 PO 3 ). Further, to obtain reliable ORR measurement, we optimized the protocol to avoid the H 3 PO 3 generation. The ORR activity of carbon-supported PtM (M = Fe, Co, Ni, Ru, Pd, and Ir) bimetallic alloy catalysts measured with this HT-RDE method showed higher ORR activity than Pt. To understand the alloying effect, we combine experiments in diluted solutions to distinguish the alloying effect on Pt–O binding and Pt–H 3 PO 4 binding. The results indicate that H 3 PO 4 mainly reduces available sites for ORR, with little effect on neighboring site’s Pt–O binding via Pt–H 3 PO 4 interaction, which is also supported by the density functional theory calculation of the Pt–O binding energy with/without H 2 PO 4 . Further study in a phosphoric acid-doped quaternary ammonium-biphosphate ion pair coordinated polyphenylene (PA-QAPOH) membrane electrode assembly (MEA) shows that the active alloy catalyst has better performance in both the HT-RDE and MEA. Also, the MEA gives higher ORR activity than the HT-RDE because of the higher pressure and less phosphoric acid content of the MEA. Yet, the gap between the HT-RDE and MEA is significantly smaller than that between the room temperature (RT)-RDE and MEA, suggesting the importance of temperature and H 3 PO 4 concentration in understanding ORR in HT-PEMFCs.
Nanoscale Design of Pd-Based Electrocatalysts for Oxygen Reduction Reaction Enhancement in Alkaline Media
Palladium (Pd)-based electrocatalysts have recently emerged as one class of the foremost promising candidates for the oxygen reduction reaction (ORR) in alkaline media due to their excellent ORR activity and durability and lower costs compared with platinum. Insightful design of Pd-based nano-architectures with optimized active surface sites and maximal intrinsic performance is central to promoting the ORR applications. To further accelerate the sluggish ORR kinetics at the cathode of fuel cells and substantially decrease the overall cost of the electrocatalysts, various strategies, including controlled sizes and shapes with selected crystallographic facets, crystal-phase engineering, heteroatom doping, tailored surface strains, and surface engineering by de-alloying, have been extensively developed in the past decade. Here in this review, a brief introduction to the fundamental ORR mechanisms of Pd-based electrocatalysts in alkaline media is presented, followed by a thorough discussion on various strategies for delicately designing high-performance Pd-based catalysts with corresponding examples. Thereafter, the perspectives and new insights into the challenges are outlined, and some emerging research directions related to the rational design and controlled synthesis of Pd-based ORR electrocatalysts are also proposed.
Kinetically Stable Oxide Overlayers on Mo 3 P Nanoparticles Enabling Lithium–Air Batteries with Low Overpotentials and Long Cycle Life
The main drawbacks of today's state-of-the-art lithium–air (Li–air) batteries are their low energy efficiency and limited cycle life due to the lack of earth-abundant cathode catalysts that can drive both oxygen reduction and evolution reactions (ORR and OER) at high rates at thermodynamic potentials. Here, inexpensive trimolybdenum phosphide (Mo 3 P) nanoparticles with an exceptional activity—ORR and OER current densities of 7.21 and 6.85 mA cm –2 at 2.0 and 4.2 V versus Li/Li + , respectively—in an oxygen-saturated non-aqueous electrolyte are reported. The Tafel plots indicate remarkably low charge transfer resistance—Tafel slopes of 35 and 38 mV dec –1 for ORR and OER, respectively—resulting in the lowest ORR overpotential of 4.0 mV and OER overpotential of 5.1 mV reported to date. Using this catalyst, a Li–air battery cell with low discharge and charge overpotentials of 80 and 270 mV, respectively, and high energy efficiency of 90.2% in the first cycle is demonstrated. Furthermore, a long cycle life of 1200 is also achieved for this cell. Density functional theory calculations of ORR and OER on Mo 3 P (110) reveal that an oxide overlayer formed on the surface gives rise to the observed high ORR and OER electrocatalytic activity and small discharge/charge overpotentials.
Circumventing Radical Generation on Fe–V Atomic Pair Catalyst for Robust Oxygen Reduction and Zinc–Air Batteries
Iron–nitrogen–carbon (Fe–N–C) catalysts are considered the most active platinum-free alternative for oxygen reduction reaction (ORR), yet the generated reactive oxygen species (ROS) from general mechanistic pathway rapidly impair the ORR activity and stability of Fe–N–C. Herein, we establish and report an ORR pathway-switching strategy to circumvent ROS generation and fundamentally improve the activity and stability of Fe–N–C via DFT guided catalyst design. The constructed Fe–V atomic pair catalyst (Fe 1 V 1 -NC) with N 2 Fe-N 2 -VN 2 configuration enables side-on adsorption of O 2 and subsequent direct-breaking of the O═O bond to form O*, thereby avoiding the formation of ROS radicals. Importantly, there is intersite electron interaction between FeN 4 and VN 4 , which further boosts the ORR activity. Consequently, Fe 1 V 1 -NC exhibits outstanding ORR activity with onset and half-wave (E 1/2 ) potentials at 1.02 and 0.89 V versus RHE, respectively, in 0.1 M KOH. Record-high stability is achieved on Fe 1 V 1 -NC with a minimal decay in E 1/2 by 16 mV over 50000 cycles, surpassing Fe–N–C counterpart and most of the catalysts reported to date. The Fe 1 V 1 -NC-based zinc-air battery reported here demonstrates exceptional durability up to 400 h at 10 mA·cm −2 . This work identifies the intrinsic correlation between ORR pathway, activity, and stability, advancing development of stable catalytic systems.
Reduction and bacterial adsorption of dissolved mercuric ion by indigenous bacteria at the Oak Ridge Reservation site
Mercury exists in various forms in the environment and the indigenous bacteria mediated processes have the potential to be used for mercury remediation. In this study, two mixed cultures of indigenous bacteria at the Oak Ridge Reservation site (i.e., ORR soil culture and ORR sediment culture) were selected to study the microbial mediated mercuric reduction under an aerobic condition as well as mercury adsorption onto bacterial surfaces. PCR analysis was performed to provide insights into the microbial community. The mercuric volatilizing experiment demonstrated the mercuric reducing capacity for both ORR cultures, in which the Pseudomonas genus was the dominating Hg 0 producer. The investigation of the impact of the sole carbon source revealed the energy-dependent characteristics of the mercuric reduction in this study. Namely, the mercuric reduction was nearly not impacted by the type of carbon source but positively related to the energy that a unit amount of substrate could provide. The study also indicated that the mercury adsorption competed with the reduction. According to the fitting of the Langmuir isotherm, the ORR soil culture was found to have a higher mercury adsorption capacity (i.e., 67.5 mg Hg/g dry biomass) than the ORR sediment culture (i.e., 53.1 mg Hg/g dry biomass). The negative correlation between the reduced mercury mass and adsorbed mercury mass was identified for both ORR cultures.