Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPTICAL TRACKING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Two-Photon-Absorption Scheme for Optical Beam Tracking

A new optical beam tracking approach for free-space optical communication links using two-photon absorption (TPA) in a high-bandgap detector material was demonstrated. This tracking scheme is part of the canonical architecture described in the preceding article. TPA is used to track a long-wavelength transmit laser while direct absorption on the same sensor simultaneously tracks a shorter-wavelength beacon. The TPA responsivity was measured for silicon using a PIN photodiode at a laser beacon wavelength of 1,550 nm. As expected, the responsivity shows a linear dependence with incident power level. The responsivity slope is 4.5 x 10(exp -7) A/W2. Also, optical beam spots from the 1,550-nm laser beacon were characterized on commercial charge coupled device (CCD) and complementary metal-oxide semiconductor (CMOS) imagers with as little as 13.7 microWatts of optical power (see figure). This new tracker technology offers an innovative solution to reduce system complexity, improve transmit/receive isolation, improve optical efficiency, improve signal-to-noise ratio (SNR), and reduce cost for free-space optical communications transceivers.

Ortiz, Gerardo G.↗
NASA NTRS1989

Real-time optical holographic tracking of multiple objects

A coherent optical correlation technique for real-time simultaneous tracking of several different objects making independent movements is described, and experimental results are presented. An evaluation of this system compared with digital computing systems is made. The real-time processing capability is obtained through the use of a liquid crystal television spatial light modulator and a dichromated gelatin multifocus hololens. A coded reference beam is utilized in the separation of the output correlation plane associated with each input target so that independent tracking can be achieved.

Chao, Tien-Hsin↗
NASA NTRS2010

Preliminary Investigations of an Optical Assembly Tracking Mechanism for LISA

After injection into their specific orbits, the position of the LISA spacecraft are not actively controlled. Rather the spacecraft are allowed to passively follow their trajectories and the roughly equilateral triangular constellation is preserved. Slight variations in the orbits cause the constellation to experience both periodic and secular variations, one consequence of which is a variation in the interior angles of the constellation on the order of one degree. This variation is larger than the field of view of the LISA telescope, requiring a mechanism for each spacecraft to maintain pointing to its two companions. This Optical Assembly Tracking Mechanism (OATM) will be used to accommodate these variations while maintaining pointing at the ten nanoradian level to the far spacecraft. Here we report on a possible design for the OATM as well as initial results from a test campaign of a piezo-inchworm actuator used to drive the mechanism.

Thorpe, James Ira↗
NASA NTRS2018

A Performance-Based Comparison of Deep-Space Navigation using Optical-Communication and Conventional Navigation Techniques: Small Body Missions

Optical communications may be used in future NASA deep-space missions, resulting in much higher data transfer rates. Those optical communication links could also be used for navigation purposes. The performance of deep-space navigation for an asteroid flyby mission using ground-based optical tracking and conventional navigation techniques was investigated in this work. We present the results of variety of asteroid flyby scenarios including low phase and high phase approach angle flybys, one slow flyby in a Trojan tour mission, and also one slow flyby in a Psyche mission. In this task, four different types of observables were simulated, namely ground-based radiometric, spacecraft on-board optical, ground-based optical tracking of spacecraft (astrometry and 2-way range magnitude), and ground-based asteroid astrometry. Different combinations of these four types of observables were compared with currently in-practice ground-based radiometric/on-board optical measurements. The results showed that the ground-based optical tracking is promising and could be a potential candidate for future deep-space navigation. Precise astrometry is not possible for active comets.

McCandless, Sara Elizabeth↗
NASA NTRS2018

A Performance-Based Comparison of Deep-Space Navigation using Optical-Communication and Conventional Navigation Techniques: Small Body Missions

Optical communications may be used in future NASA deep-space missions, resulting in much higher data transfer rates. Those optical communication links could also be used for navigation purposes. The performance of deep-space navigation for an asteroid flyby mission using ground-based optical tracking and conventional navigation techniques was investigated in this work. We present the results of variety of asteroid flyby scenarios including low phase and high phase approach angle flybys, one slow flyby in a Trojan tour mission, and also one slow flyby in a Psyche mission. In this task, four different types of observables were simulated, namely ground-based radiometric, spacecraft on-board optical, ground-based optical tracking of spacecraft (astrometry and 2-way range magnitude), and ground-based asteroid astrometry. Different combinations of these four types of observables were compared with currently in-practice ground-based radiometric/on-board optical measurements. The results showed that the ground-based optical tracking is promising and could be a potential candidate for future deep-space navigation. Precise astrometry is not possible for active comets.

McCandless, Sarah Elizabeth↗
NASA NTRS1972

Synchronization using pulsed edge tracking in optical PPM communication system

A pulse position modulated (PPM) optical communication system using narrow pulses of light for data transmission requires accurate time synchronization between transmitter and receiver. The presence of signal energy in the form of optical pulses suggests the use of a pulse edge tracking method of maintaining the necessary timing. The edge tracking operation in a binary PPM system is examined, taking into account the quantum nature of the optical transmissions. Consideration is given first to pure synchronization using a periodic pulsed intensity, then extended to the case where position modulation is present and auxiliary bit decisioning is needed to aid the tracking operation. Performance analysis is made in terms of timing error and its associated statistics. Timing error variances are shown as a function of system signal to noise ratio.

Gagliardi, R.↗
NASA NTRS1992

Analysis of a spatial tracking subsystem for optical communications

Spatial tracking plays a very critical role in designing optical communication systems because of the small angular beamwidth associated with the optical signal. One possible solution for spatial tracking is to use a nutating mirror which dithers the incoming beam at a rate much higher than the mechanical disturbances. A power detector then senses the change in detected power as the signal is reflected off the nutating mirror. This signal is then correlated with the nutator driver signals to obtain estimates of the azimuth and elevation tracking signals to control the fast scanning mirrors. A theoretical analysis is performed for a spatial tracking system using a nutator disturbed by shot noise and mechanical vibrations. Contributions of shot noise and mechanical vibrations to the total tracking error variance are derived. Given the vibration spectrum and the expected signal power, there exists an optimal amplitude for the nutation which optimizes the receiver performance. The expected performance of a nutator based system is estimated based on the choice of nutation amplitude.

Win, Moe Z.↗
NASA NTRS1996

Multibeam optical apparatus and method for tracking control for an optical disk having a set of tracks

A multitrack optical disk has two or more circular or spiral tracks, which are recorded or played back in simultaneous sets for high data rates. Tracking is accomplished by sets of first and second tracking pads, which lie partially on and partially off the track paths. The amount of inter-track space required to accommodate the track pads is reduced by placing the overlap of the tracking pads in the same inter-track space, and by tracking any additional simultaneous tracks in excess of two by mechanical coupling with the first two.

Reno, Charles W.↗