SEARCH · Engineering Papers

Results for “Numerical modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Comparison of Numerical Model Results with Diffusion Flames in Microgravity

The effects of gravity on methane diffusion flames were studied using a finite difference numerical model. Variables under consideration included velocity, pressure, temperature, enthalpy, reactive species, and inert carrier gas. Results obtained showed that flames in zero gravity were wider and taller than those in normal gravity. The use of a six reaction scheme produced similar predictions of flame width and height compared to those of the single reaction case. The numerical models predicted a considerable difference in the flame base region between normal gravity and low gravity. This region is considered to be beyond the boundaries of current analytical models.

Hyer, Paul V.↗

NASA NTRS1979

Numerical modeling of two-dimensional confined flows

A numerical model of two-dimensional confined flows is presented. The flow in the duct is partitioned into finite streams. The difference equations are then obtained by applying conservation principles directly to the individual streams. A listing of a computer code based on this approach in FORTRAN 4 language is presented. The code computes two dimensional compressible turbulent flows in ducts when the duct area along the flow is specified and the pressure gradient is unknown.

Greywall, M. S.↗

NASA NTRS1978

A numerical model for low-latitude ionospheric TEC

A numerical model of total electron content (TEC) at low latitudes has been constructed from the Faraday rotation data recorded at a number of locations in India during the period Oct. 1975-July 1976 when the geostationary satellite ATS-6 was located at 35 deg E. In all, 36 coefficients for each season are required to represent the model. The model can be used for satellite tracking systems in estimating quickly the range, range rate and angular refraction errors. The present model is an improvement over the previously constructed model based on orbiting satellite data.

Sethia, G.↗

NASA NTRS1992

An improved numerical model for wave rotor design and analysis

A numerical model has been developed which can predict both the unsteady flows within a wave rotor and the steady averaged flows in the ports. The model is based on the assumptions of one-dimensional, unsteady, and perfect gas flow. Besides the dominant wave behavior, it is also capable of predicting the effects of finite tube opening time, leakage from the tube ends, and viscosity. The relative simplicity of the model makes it useful for design, optimization, and analysis of wave rotor cycles for any application. This paper discusses some details of the model and presents comparisons between the model and two laboratory wave rotor experiments.

Paxson, Daniel E.↗

NASA NTRS1993

An improved numerical model for wave rotor design and analysis

Paxson, Daniel E.↗

NASA NTRS2011

Implementation of a Sage-Based Stirling Model Into a System-Level Numerical Model of the Fission Power System Technology Demonstration Unit

The Fission Power System (FPS) project is developing a Technology Demonstration Unit (TDU) to verify the performance and functionality of a subscale version of the FPS reference concept in a relevant environment, and to verify component and system models. As hardware is developed for the TDU, component and system models must be refined to include the details of specific component designs. This paper describes the development of a Sage-based pseudo-steady-state Stirling convertor model and its implementation into a system-level model of the TDU.

Briggs, Maxwell H.↗

NASA NTRS1992

Testing and numerical modeling of hypervelocity impact damaged Space Station multilayer insulation

Results are presented of experiments measuring the degradation of the insulating capabilities of the multilayer insulation (MLI) of the Space Station Freedom, when subjected to hypervelocity impact damage. A simple numerical model was developed for use in an engineering design environment for quick assessment of thermal effect of the impact. The model was validated using results from thermal vacuum tests on MLI with simulated damage. The numerical model results agreed with experimental data.

Rule, William K.↗

NASA NTRS1983

Numerical models for cometary dust environments

The development of a numerical model for the dust environment near a comet is described. The major components of the model are a simple treatment of the acceleration of the dust by the gas outflow from an isothermal icy nucleus, a detailed treatment of the dust particle trajectories controlled by solar gravity and radiation pressure, including the formation of the dust envelope and tail, and a simple treatment of the radiation from the dust in the visible and thermal infrared. The results of recent comet observations are used to estimate parameter values for the model, including dust-to-gas ratios by light and by mass, the distribution of dust and gas emission on the nuclear surface, the distributions of dust particle size, density, mass, and radiative properties, and other quantities. Gas and dust production rates as functions of time are derived from observed light curves using the simple photometric theory. Sample results are presented for the dust concentration, flux and fluence along the trajectory of a spacecraft which flies by Comet P/Halley in 1986.

Divine, N.↗

NASA NTRS1991

Numerical models of extragalactic radio sources

When supercomputer-implemented numerical simulations analyzing the nonlinear physics inherent in the hydrodynamic and MHD equations are applied to extragalactic radio sources, many of the complex structures observed on telescopic images are reproduced. Attention is presently given to recently obtained results from 2D and 3D numerical simulations of the formation and evolution of extended radio morphologies; these numerical models allow the exploration of such physical phenomena as the role of magnetic fields in the dynamics and emissivity of extended radio galaxies, intermittent outflow from the cores of active galaxies, fluid-jet instabilities, and the bending of collimated outflows by motion through the intergalactic medium.

Burns, Jack O.↗

NASA NTRS1993

Numerical modeling of preburner flowfield

This work is intended to numerically predict the flowfields inside the preburner of the Space Shuttle Main Engine. The computer code (FDNS) based on pressure correction method is modified and adapted with an elliptic grid generator. The original configuration of the preburner in conjunction with downstream gas turbines has been simplified geometrically and numerically modeled at its full power in this work. The computational results are presented and qualitatively discussed with test data collected in NASA/MSFC.

Chow, A. S.↗

NASA NTRS2001

Noninvasive assessment of mitral inertness: clinical results with numerical model validation

Inertial forces (Mdv/dt) are a significant component of transmitral flow, but cannot be measured with Doppler echo. We validated a method of estimating Mdv/dt. Ten patients had a dual sensor transmitral (TM) catheter placed during cardiac surgery. Doppler and 2D echo was performed while acquiring LA and LV pressures. Mdv/dt was determined from the Bernoulli equation using Doppler velocities and TM gradients. Results were compared with numerical modeling. TM gradients (range: 1.04-14.24 mmHg) consisted of 74.0 +/- 11.0% inertial forcers (range: 0.6-12.9 mmHg). Multivariate analysis predicted Mdv/dt = -4.171(S/D (RATIO)) + 0.063(LAvolume-max) + 5. Using this equation, a strong relationship was obtained for the clinical dataset (y=0.98x - 0.045, r=0.90) and the results of numerical modeling (y=0.96x - 0.16, r=0.84). TM gradients are mainly inertial and, as validated by modeling, can be estimated with echocardiography.

NASA Discipline Cardiopulmonary↗

NASA NTRS1994

Five years' central Pacific sea level from in situ array, satellite altimeter and numerical model

Temporal and spatial fetures of central equatorial Pacific Ocean sea-level variation appear similar, in measurements from two very different systems (one in the ocean and one carried on a satellite), and in results from a numerical model of the region. In particular, there is an interannual cycle: during El Nino, Kelvin waves appear at the equator, and the sea-surface ridge associated with the equatorial current system shifts southward; in non-El Nino years, instability waves appear at 6 deg N (strongest around the end of each calendar year), and the ridge shifts to the north. This three-way comparison gives support to both measurement systems and to the numerical model.

Donohue, Kathleen A.↗

NASA NTRS2019

Numerical Modeling of Boiling in a Heated Tube

This paper presents numerical models of boiling in a heated tube using the Generalized Fluid System Simulation Program (GFSSP), a finite-volume-based general-purpose flow network code developed at NASA/Marshall Space Flight Center. The heated tube is discretized into a one-dimensional array of nodes and branches to represent the flow of liquid and vapor in a tube with a prescribed pressure differential. The solid wall is also discretized into solid nodes and conductors to allow for heat transfer between the wall and the fluid. The conservation equations of mass, momentum, and energy of the fluid are solved simultaneously with the energy conservation equation for the solid wall. Two experimental configurations of fluid flowing in a vertical tube have been simulated, one with water and the other with liquid hydrogen. This paper compares experimental data with numerical predictions based on four different published correlations for boiling heat transfer coefficients. Three of these correlations are applicable to the saturated vertical flow conditions of the experiments. One of them is applicable to film boiling and has been used for the liquid hydrogen experiment, which was in film boiling regime. For the case of boiling water, the predictions of wall temperatures using the boiling heat transfer correlations agreed well with the experimental results. However, in the case of boiling hydrogen larger discrepancies were observed between the experimental data and numerical predictions.

Majumdar, Alok↗

NASA NTRS1981

A numerical model study of long-term planetary wave predictability

A numerical model was developed to study planetary wave behavior over periods up to 4 months under the influences of stochastic and diffusive forcing by synoptic scale motions and of sea surface temperature anomalies. The model is suitable for Monte Carlo experiments which provide ensemble mean and variance predictions and permit the response to heating anomalies to be partly separated from random variability. The model incorporates the linear-balanced dynamical equations for wind at two tropospheric levels and temperature at one level. The model atmosphere is forced by semiempirical January heating linearly dependent on local air temperature. Topography and the lower boundary layer are represented by vertical motion and drag functions, respectively, of the lower level wind. The linear phase speeds of Rossby waves are modified to reflect the effect of the stratosphere.

Wobus, R. L.↗

NASA NTRS1984

Numerical modeling of D-mappings with applications to chemical kinetics

Numerical modeling of D-mappings was studied and applied to solving nonlinear stiff systems. These mappings were locally linearized for convergence analysis, and some applications were made to chemical kinetics. The technique avoids using multistep implicit codes that require inversion of Jacobian matrices, but depends on the Jacobians for its convergence analysis.

Dey, S. K.↗

NASA NTRS1987

Short range forecasting of sea breeze generated thunderstorms at the Kennedy Space Center: A real-time experiment using a primitive equation mesoscale numerical model

The operational efficiency of using guidance from a mesoscale numerical model to improve sea breeze thunderstorm forecasts at and around the Shuttle landing strip was assessed. The Prognostic Three-Dimensional Mesoscale (P3DM) model, developed as a sea breeze model, reveals a strong correlation between regions of mesoscale convergence and the triggering of sea breeze convection thunderstorms. The P3DM was modified to generate stability parameters familiar to the operational forecaster. In addition to the mesoscale fields of wind, vertical motion, moisture, temperature, a stability indicator, a combination of model-predicted K and Lifted Indices and the maximum grid cell vertical motion, were proposed and tested. Results of blind tests indicate that a forecaster, provided with guidance derived from model output, could improve local thunderstorm forecasts.

Lyons, Walter A.↗

NASA NTRS1989

Numerical modeling for primary atomization of liquid jets

In the proposed numerical model for primary atomization, surface-wave dispersion equations are solved in conjunction with the jet-embedding technique of solving mean flow equations of a liquid jet. Linear and approximate nonlinear models have been considered. In each case, the dispersion equation is solved over the whole wavelength spectrum to predict drop sizes, frequency, and liquid-mass breakup rates without using any empirical constants. The present model has been applied to several low-speed and high-speed jets. For the high-speed case (the LOX/H2 coaxial injector of the Space Shuttle Main Engine Preburner), predicted drop sizes and liquid breakup rates are in good agreement with the results of the CICM code, which have been calibrated against measured data.

Przekwas, A. J.↗

NASA NTRS1993

A comparison between numerically modelled and experimentally measured loss mechanisms in wave rotors

A numerical model has been developed which is capable of predicting the performance of a wave rotor (pressure exchanger) of specified geometry over a wide range of operating conditions. The model can account for the major loss mechanisms of leakage from the tube ends, fluid viscosity, heat transfer to the tube wails, finite tube opening time, shock waves, and non-uniform port flows. It is a one dimensional flow model which follows a single tube as it rotates past the various stationary ports. Since the model is relatively simple (i.e., one dimensional) it uses little computer time. This makes it suitable for design as well as analytical purposes. This paper will present a brief description of the model then discuss a comparison between the model predictions and several wave rotor experiments.

Paxson, Daniel E.↗