Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NOX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Relationship of peroxyacetyl nitrate to active and total odd nitrogen at northern high latitudes: influence of reservoir species on NOx and O3

Measurements of peroxyacetyl nitrate (PAN), NO, NO2, HNO3, NOy (total odd nitrogen), and O3 were made in the high-latitude troposphere over North America and Greenland (35 degrees to 82 degrees N) during the Arctic Boundary Layer Expedition (ABLE 3A) (July-August 1988) throughout 0-to 6-km altitudes. These data are analyzed to quantitatively describe the relationships between various odd nitrogen species and assess their significance to global tropospheric chemistry. In the free troposphere, PAN was as much as 25 times more abundant than NOx. PAN to NOx ratio increased with increasing altitude and latitude. PAN was found to be the single most abundant reactive nitrogen species in the free troposphere and constituted a major fraction of NOy, PAN to NOy ratios were about 0.1 in the boundary layer and increased to 0.4 in the free troposphere. A 2-D global photochemical model with C1-C3 hydrocarbon chemistry is used to compare model predictions with measured results. A sizable portion (approximately 50%) of the gaseous reactive nitrogen budget is unaccounted for, and unknown organic nitrates and pernitrates are expected to be present. Model calculations (August 1, 70 degrees N) show that a major fraction of the observed NOx (50 to 70% of median) may find its source in the available PAN reservoir. PAN and the unknown reservoir species may have the potential to control virtually the entire NOx availability of the high latitude troposphere. It is predicted that the summer NOx and O3 mixing ratios in the Arctic/sub-Arctic troposphere would be considerably lower in the absence of the ubiquitous PAN reservoir. Conversely, this PAN reservoir may be responsible for the observed temporal increase in tropospheric O3 at high latitudes.

NASA Center ARC↗

Inverse Modeling of Texas NOx Emissions Using Space-Based and Ground-Based NO2 Observations

Inverse modeling of nitrogen oxide (NOx) emissions using satellite-based NO2 observations has become more prevalent in recent years, but has rarely been applied to regulatory modeling at regional scales. In this study, OMI satellite observations of NO2 column densities are used to conduct inverse modeling of NOx emission inventories for two Texas State Implementation Plan (SIP) modeling episodes. Addition of lightning, aircraft, and soil NOx emissions to the regulatory inventory narrowed but did not close the gap between modeled and satellite observed NO2 over rural regions. Satellitebased top-down emission inventories are created with the regional Comprehensive Air Quality Model with extensions (CAMx) using two techniques: the direct scaling method and discrete Kalman filter (DKF) with Decoupled Direct Method (DDM) sensitivity analysis. The simulations with satellite-inverted inventories are compared to the modeling results using the a priori inventory as well as an inventory created by a ground-level NO2 based DKF inversion. The DKF inversions yield conflicting results: the satellite based inversion scales up the a priori NOx emissions in most regions by factors of 1.02 to 1.84, leading to 3-55% increase in modeled NO2 column densities and 1-7 ppb increase in ground 8 h ozone concentrations, while the ground-based inversion indicates the a priori NOx emissions should be scaled by factors of 0.34 to 0.57 in each region. However, none of the inversions improve the model performance in simulating aircraft-observed NO2 or ground-level ozone (O3) concentrations.

Nitrogen dioxide↗

True Emission Factors for Forest Fires and the Role of Non-Fire NOx

True Emission Factors for Forest Fires and the Role of Non-Fire NOx Robert B. Chatfield and Meinrat Andreae The standard way to estimate biomass burning emissions factors from airborne, surface, or laboratory data is to relate the emitted pollutant concentration to the carbon burned, C(sub tot), and liberated to the air, mostly CO2. We approximate total emitted carbon C(sub tot) ~ (CO2 + CO). Emission ratios that are based on CO, describing burning effects, delta-parameter delta-CO, are often used to quantify fire emissions. These are not as useful as emission factors, for they often complicate analyses, since delta-CO delta-CO2 may vary by unto tenfold, and can have bias artifacts of similar magnitude. We present a methodology that estimates both emission factors and a reasonable description of background C(sub tot). High O3 values require a history of the balanced interaction of two pollutant types, nitrogen oxides (NOx) and a radical source, VOCs. However, high VOC NOx ratios seen in many plumes, especially from smoldering-dominated fires, make substantial O3 formation less likely. One particularly intense fire we analyzed, the notorious Rim Fire of 2013, near Yosemite, California. It produced notable quantities of free NOx and (both gas- and particle-phase) Cl species. Consequently, we also outline a quantitative way to assess the effects of anthropogenic or lightning NOx. We provide the example of California burning emissions using measurements of HCHO, NO, and the photolysis rate j(sub HCHO).

Chatfield, Robert B.↗

A TROPOMI- and GLM-Based Estimate of NOx Production by Lightning over the U.S.

Lightning produces NO because the extreme temperatures (>20000 K) in lightning channels dissociate molecular O2 and molecular N2, which then combine to form NOx which quickly reacts with O3 to form NO2. Lightning is responsible for 10-15% of NOx emissions globally. This is 2 – 8 Tg N a-1 [Schumann and Huntrieser, 2007] or 100 to 400 mol per flash. Much of the uncertainty stems from limited knowledge of lightning NOx production per flash (LNOx PE) or per unit flash length. Most LNOx is injected into mid- and upper-troposphere where away from deep convection its lifetime is longer relative to lower troposphere NOx. NOx in this region enhances the concentrations of upper tropospheric NOy, OH, and O3 and contributes to positive radiative forcing by O3 and negative forcing by CH4. We have previously used OMI NO2 to obtain estimates of LNOx production per flash over the Gulf of Mexico (Pickering et al., 2016, JGR), in convective events during NASA’s TC4 field program (Bucsela et al., 2010, JGR), and over broad regions of the tropics (Allen et al., 2019, JGR) and midlatitudes (Bucsela et al., 2019, JGR). In the latter studies, we obtained PE values of 170 ± 100 mol flash and 180 ± 100 mol flash, respectively.

Allen, Dale↗

Changes in the Ozone Chemical Regime Over the Contiguous United States Inferred By the Inversion of NOx and VOC Emissions Using Satellite Observation

To investigate changes in the ozone (O3) chemical production regime over the contiguous United States (CONUS) with accurate knowledge of concentrations of its precursors, we applied an inverse modeling technique with Ozone Monitoring Instrument (OMI) tropospheric nitrogen dioxide (NO2) and total formaldehyde (HCHO) retrieval products in the summers of 2011, 2014, and 2017, years in which United States National Emission Inventory were based. The inclusion of dynamic chemical lateral boundary conditions and lightning-induced nitric oxide emissions significantly account for the contribution of background sources in the free troposphere. Satellite-constrained nitrogen oxide (NOx) and non-methane volatile organic compounds (NMVOCs) emissions mitigate the discrepancy between satellite and modeled columns: the inversion suggested 2.33-2.84 (1.07-1.34) times higher NOx over the CONUS (over urban regions) and 0.28-0.81 times fewer NMVOCs emissions over the southeastern United States. The model-derived HCHO/NO2 column ratio shows gradual spatial changes in the O3 production regime near urban cores relative to previously defined threshold values representing NOx and VOC sensitive conditions. We also found apparent shifts from the NOx-saturated regime to the transition regime (or the transition regime to the NOx-limited regime) over the major cities in the western United States. In contrast, rural areas, especially in the east-southeastern United States, exhibit a decreased HCHO/NO2 column ratio by -1.30 ± 1.71 with a reduction in HCHO column primarily driven by meteorology, becoming sensitive to VOC emissions. Results show that incorporating satellite observations into numerical modeling could help policymakers implement appropriate emission control policies for O3 pollution.

HCHO/NO2 factorInverse modelingOzone chemical regi↗

Palladium/Zeolite Low Temperature Passive NOx Adsorbers (PNA): Structure-Adsorption Property Relationships for Hydrothermally Aged PNA Materials

Zeolites with different framework structures (SSZ-13, ZSM-5, BEA) but similar Si/Al ratios and Pd loading (~1 wr%) were synthesized and evaluated as low temperature passive NOx adsorbers (PNA). These materials exhibit high NOx adsorption efficiency with atomically dispersed Pd the active adsorption site. Hydrothermal aging at 750 ºC for 16 hours in the presence of 10% water vapor in air resulted in the formation of PdO nanoparticles in all three samples as evidenced by high energy XRD. Hydrothermal aging of the small-pore Pd/SSZ-13 (Si/Al = 6), which contain ~100-90% atomically dispersed palladium ions, decreases its PNA performance only by ~10-20%. High-field solid state 27Al NMR studies on the fresh and aged samples substantiate dealumination and significant changes in the distribution of Al (and thus, Bronsted acid) sites after hydrothermal aging. FTIR measurements with NO probe molecule and titration of Bronsted acid sites with nitrosyl (NO+) ions further corroborate the 27Al NMR data. Because framework aluminum atoms are the anchoring sites for atomically dispersed Pd ions, their elution from the framework causes the loss of active atomically dispersed Pd species. Furthermore, with the aid of HAADF-STEM imaging and synchrotron XRD studies, we further confirm and visualize the fate of these Pd species – they agglomerate into PdO nanoparticles on the external surface of zeolite. Consequently, these changes lead to the decrease in PNA performance of these materials after hydrothermal aging. The thus formed agglomerates cannot be re-dispersed back to their ionic state due to the loss of framework Al T-sites and/or inherent stability of such large PdO particles. Our study clearly demonstrates that, unlike in previous studies that found increased PNA performance upon HTA , high temperatures hydrothermal aging of PNA materials that contain atomically dispersed Pd initially, results in a decrease in NOx storage efficiency due mostly to the formation of PdO agglomerates. However, we also highlight the high hydrothermal stability of predominantly atomically dispersed 1-3 wt% Pd/SSZ-13 (Si/Al = 6), whose performance decreases only marginally after prolonged hydrothermal aging at 750 ºC. Overall, this study shows that hydrothermally stable passive NOx materials can be prepared using small-pore SSZ-13 zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of the 2008 Global Recession on Air Quality over the United States: Implications for Surface Ozone Levels from Changes in NOx Emissions

Satellite and ground observations detected large variability in nitrogen oxides (NOx) during the 2008 economic recession, but the impact of the recession on air quality has not been quantified. This study combines observed NOx trends and a regional chemical transport model to quantify the impact of the recession on surface ozone (O3) levels over the continental United States. The impact is quantified by simulating O3 concentrations under two emission scenarios: business-as-usual (BAU) and recession. In the BAU case, the emission projection from the Cross-State Air Pollution Rule is used to estimate the would-be NOx emission level in 2011. In the recession case, the actual NO2 trends observed from Air Quality System ground monitors and the Ozone Monitoring Instrument on the Aura satellite are used to obtain realistic changes in NOx emissions. The model prediction with the recession effect agrees better with ground O3 observations over time and space than the prediction with the BAU emission. The results show that the recession caused a 12ppbv decrease in surface O3 concentration over the eastern United States, a slight increase (0.51ppbv) over the Rocky Mountain region, and mixed changes in the Pacific West. The gain in air quality benefits during the recession, however, could be quickly offset by the much slower emission reduction rate during the post-recession period.

NOx emissions↗

NOx Emissions Characteristics and Correlation Equations of Two P and W's Axially Staged Sector Combustors Developed Under NASA Environmentally Responsible Aviation (ERA) Project

Two P&W (Pratt & Whitney)'s axially staged sector combustors have been developed under NASA's Environmentally Responsible Aviation (ERA) project. One combustor was developed under ERA Phase I, and the other was developed under ERA Phase II. Nitrogen oxides (NOx) emissions characteristics and correlation equations for these two sector combustors are reported in this article. The Phase I design was to optimize the NOx emissions reduction potential, while the Phase II design was more practical and robust. Multiple injection points and fuel staging strategies are used in the combustor design. Pilot-stage injectors are located on the front dome plate of the combustor, and main-stage injectors are positioned on the top and bottom (Phase I) or on the top only (Phase II) of the combustor liners downstream. Low power configuration uses only pilot-stage injectors. Main-stage injectors are added to high power configuration to help distribute fuel more evenly and achieve lean burn throughout the combustor yielding very low NOx emissions. The ICAO (International Civil Aviation Organization) landing-takeoff NOx emissions are verified to be 88 percent (Phase I) and 76 percent (Phase II) under the ICAO CAEP/6 (Committee on Aviation Environmental Protection 6th Meeting) standard, exceeding the ERA project goal of 75 percent reduction, and the combustors proved to have stable combustion with room to maneuver on fuel flow splits for operability.

sector combustor test↗

A near-explicit mechanistic evaluation of Isoprene photochemical seecondary organic aerosol formation and evolution: simulations of multiple chamber experiments with and without added NOx

Experimentally determined yields of secondary organic aerosol (SOA) from the photochemical oxidation of isoprene in the absence of aqueous acidic aerosol vary substantially, both within a given experiment and across different environmental chamber conditions. The underlying mechanisms driving this variation remain poorly evaluated, leading to significant uncertainty in how to extrapolate laboratory chamber results to the atmosphere. Herein, we compare SOA predictions from a near-explicit gas-phase chemical mechanism of isoprene oxidation by the hydroxyl radical (OH) in the presence and absence of nitrogen oxide radicals (NOx), to multiple chamber experiments on non-aqueous isoprene photochemical SOA (ipSOA) conducted by different groups in different chambers. SOA is predicted by volatility-driven gas-particle partitioning of hundreds of individual reaction products. The mechanism includes simplified descriptions of particle-phase organic chemistry, including organic hydroperoxide photolysis, and organic nitrate hydrolysis and accretion reactions. The model has good skill (mean normalized bias typically within 25%) at predicting the observed formation and evolution of ipSOA across a range of chambers and conditions at low NOx. The model has much less skill at describing the observed non-linear response of ipSOA to elevated NOx. Organic nitrate hydrolysis is unable to explain significant ipSOA at high NOx, whereas particle-phase accretion reactions of tertiary nitrates may play a role. Uncertainties in the chamber radical environment and fate of key organic peroxy radicals (RO2) remain as or even more important than vapor losses to chamber walls in determining how best to extrapolate chamber-based yields to the atmosphere. Implications for likely atmospheric yields of ipSOA and recommendations for future chamber experiments are discussed.

Thornton, Joel A.↗

High Frequency Transverse Instabilities in Low NOx Gas Turbines

This program addresses the topic of combustion instabilities under the goal of developing “Low-NOx Combustion Technology for ‘Air-Breathing’ Advanced Turbines”. With recent advances in high-temperature withstanding materials, the push towards higher efficiency has resulted in efforts to design high temperature, low NOx gas turbines. The development of such low NOx systems is often plagued with combustion instabilities. These instabilities manifest with acoustic modes that are longitudinal, transverse or both. A large body of literature and work exists addressing the underlying mechanisms and models for longitudinal instabilities and these have been successfully implemented in the design tools for low NOx gas turbines. The flame response aspect of the thermoacoustic feedback loop was often modeled in an acoustically compact framework since for low frequencies, the flame length scale was small compared to the acoustic wavelength. This enabled simplification where the modeling focused only on the overall flame response and not the local spatial distribution of the flame response. In addition, additional mechanisms such as the direct effect of pressure fluctuations on the flame response could be neglected. In contrast, high frequency instabilities which often are transverse in nature, have received relatively less attention in the literature. The flame is no longer acoustically compact and thus the local distribution of heat release must be accurately understood. The flame responds to velocity fluctuations, equivalence ratio fluctuations as before, but also to pressure fluctuations through kinetic effects. These aspects of high-frequency instabilities make it a challenging problem that requires a detailed elucidation of the underlying mechanisms and creating models for them. In this program we significantly improved the understanding of these instabilities through a combination of experiments (informed by interactions with OEMs), modeling of measured data and reduced order modeling of flame response. The results from the program can be used as basis for robust design tools that are essential for successfully developing gas turbines that operate in an environmentally acceptable manner with mitigation strategies for high-frequency instabilities.

08 HYDROGEN↗

A model investigation of the impact of increases in anthropogenic NOx emissions between 1967 and 1980 on tropospheric ozone

The impact of anthropogenic NOx emission on tropospheric ozone has been investigated. Two statistical models were used for estimating annual global emissions of NOx and for driving the trend in the emission for the years 1966-1980. Both models show a steady increase in the NOx emission, except for two brief periods of leveling off: after 1973 and after 1978. The impact was estimated by calculating the rates of emissions as functions of latitude, longitude, and year, with a one-dimensional (latitudinal) model, which included coupled tropospheric photochemistry and diffusive meridional transport. Steady-state photochemical calculations with prescribed NOx emissions appropriate for 1966 and 1980 indicate an ozone increase of 8-11 percent in the Northern Hemisphere, a result compatible with the rise in ozone suggested by the observations.

Dignon, J.↗

Evidence for a thermospheric source of stratospheric NOx

Analyses of a three-year time series of rocket ozone measurements at Wallops Island, VA, a set of rocket ozone soundings across the Southern Hemisphere, and rocket soundings at Fort Churchill, Manitoba are reported. Evidence is obtained that the NOx budget is not simply explained by oxidation of biospheric nitrous oxide. I 1-D time-dependent photochemical model is used to compute the amount of NO2 required to maintain odd oxygen in a steady state after accounting for Chapman, odd hydrogen, and odd chlorine reactions. At Wallops Island, a mid-latitude station, the inferred seasonal variation of NOx is small with the fall and winter mixing ratios about 20 percent greater than the spring and summer values. The soundings at Fort Churchill require about the same NOx amount as at Wallops Island in the spring and summer months but more than twice this amount in late fall and winter. Results indicate that the nitrous oxide source of NOx is supplemented by a polar source during the fall and winter months. This is consistent with the descent of thermospheric air with its high nitric oxide content during the period of strong cooling in the polar night.

Krueger, A. J.↗

Fuel-Air Mixing Effect on Nox Emissions for a Lean Premixed-Prevaporized Combustion System

The lean premixed-prevaporized (LPP) concept effectively meets low nitrogen oxides (NOx) emission requirements for combustors with the high inlet temperature and pressure typical of the High-Speed Civil Transport (HSCT). For the LPP system fuel-air mixture uniformity is probably the most important factor for low NOx emissions. Previous studies have suggested that the fuel-air mixture uniformity can be severely affected by changing the number and configuration of fuel injection points. Therefore, an experimental study was performed to determine how the number of fuel injection points and their arrangement affect NOx emissions from an LPP system. The NOx emissions were measured by a gas-sampling probe in a flame-tube rig at the following conditions: inlet temperature of 810 K (1000 F), rig pressure of 10 atm, reference velocity of 150 ft/s, and residence time near 0.005 s. Additionally, a focused Schlieren diagnostic technique coupled with a high speed camera was used to provide a qualitative description of the spatial flow field.

Lee, Chi-Ming↗

Flame Tube NOx Emissions Using a Lean-Direct-Wall-Injection Combustor Concept

A low-NOx emissions combustor concept has been demonstrated in flame tube tests. A lean-direct injection concept was used where the fuel is injected directly into the flame zone and the overall fuel-air mixture is lean. In this concept the air is swirled upstream of a venturi section and the fuel is injected radially inward into the air stream from the throat section using a plain-orifice injector. Configurations have two-, four-, or six-wall fuel injectors and in some cases fuel is also injected from an axially located simplex pressure atomizer. Various orifice sizes of the plain-orifice injector were evaluated for the effect on NOx. Test conditions were inlet temperatures up to 8 1 OK, inlet pressures up to 2760 kPa, and flame temperatures up to 2100 K. A correlation is developed relating the NOx emissions to inlet temperature, inlet pressure, fuel-air ratio and pressure drop. Assuming that 15 percent of the combustion air would be used for liner cooling and using an advanced engine cycle, for the best configuration, the NOx emissions using the correlation is estimated to be <75 percent of the 1996 ICAO standard.

Tacina, Robert R.↗

Low NOx, Lean Direct Wall Injection Combustor Concept Developed

The low-emissions combustor development at the NASA Glenn Research Center is directed toward advanced high-pressure aircraft gas turbine applications. The emphasis of this research is to reduce nitrogen oxides (NOx) at high-power conditions and to maintain carbon monoxide and unburned hydrocarbons at their current low levels at low-power conditions. Low-NOx combustors can be classified into rich burn and lean burn concepts. Lean burn combustors can be further classified into lean-premixed-prevaporized (LPP) and lean direct injection (LDI) combustors. In both concepts, all the combustor air, except for liner cooling flow, enters through the combustor dome so that the combustion occurs at the lowest possible flame temperature. The LPP concept has been shown to have the lowest NOx emissions, but for advanced high-pressure-ratio engines, the possibly of autoignition or flashback precludes its use. LDI differs from LPP in that the fuel is injected directly into the flame zone and, thus, does not have the potential for autoignition or flashback and should have greater stability. However, since it is not premixed and prevaporized, the key is good atomization and mixing of the fuel quickly and uniformly so that flame temperatures are low and NOx formation levels are comparable to those of LPP.

Tacina, Robert R.↗

High Pressure Low NOx Emissions Research: Recent Progress at NASA Glenn Research Center

In collaboration with U.S. aircraft engine companies, NASA Glenn Research Center has contributed to the advancement of low emissions combustion systems. For the High Speed Research Program (HSR), a 90% reduction in nitrogen oxides (NOx) emissions (relative to the then-current state of the art) has been demonstrated in sector rig testing at General Electric Aircraft Engines (GEAE). For the Advanced Subsonic Technology Program (AST), a 50% reduction in NOx emissions relative to the 1996 International Civil Aviation Organization (ICAO) standards has been at demonstrated in sector rigs at both GEAE and Pratt & Whitney (P&W). During the Ultra Efficient Engine Technology Program (UEET), a 70% reduction in NOx emissions, relative to the 1996 ICAO standards, was achieved in sector rig testing at Glenn in the world class Advanced Subsonic Combustion Rig (ASCR) and at contractor facilities. Low NOx combustor development continues under the Fundamental Aeronautics Program. To achieve these reductions, experimental and analytical research has been conducted to advance the understanding of emissions formation in combustion processes. Lean direct injection (LDI) concept development uses advanced laser-based non-intrusive diagnostics and analytical work to complement the emissions measurements and to provide guidance for concept improvement. This paper describes emissions results from flametube tests of a 9- injection-point LDI fuel/air mixer tested at inlet pressures up to 5500 kPa. Sample results from CFD and laser diagnostics are also discussed.

Chi-Ming, Lee↗

NASA Glenn High Pressure Low NOx Emissions Research

In collaboration with U.S. aircraft engine companies, NASA Glenn Research Center has contributed to the advancement of low emissions combustion systems. For the High Speed Research Program (HSR), a 90% reduction in nitrogen oxides (NOx) emissions (relative to the then-current state of the art) has been demonstrated in sector rig testing at General Electric Aircraft Engines (GEAE). For the Advanced Subsonic Technology Program (AST), a 50% reduction in NOx emissions relative to the 1996 International Civil Aviation Organization (ICAO) standards has been demonstrated in sector rigs at both GEAE and Pratt & Whitney (P&W). During the Ultra Efficient Engine Technology Program (UEET), a 70% reduction in NOx emissions, relative to the 1996 ICAO standards, was achieved in sector rig testing at Glenn in the world class Advanced Subsonic Combustion Rig (ASCR) and at contractor facilities. Low NOx combustor development continues under the Fundamental Aeronautics Program. To achieve these reductions, experimental and analytical research has been conducted to advance the understanding of emissions formation in combustion processes. Lean direct injection (LDI) concept development uses advanced laser-based non-intrusive diagnostics and analytical work to complement the emissions measurements and to provide guidance for concept improvement. This paper describes emissions results from flametube tests of a 9-injection-point LDI fuel/air mixer tested at inlet pressures up to 5500 kPa. Sample results from CFD and laser diagnostics are also discussed.

Tacina, Kathleen M.↗

Estimates of the Lightning NOx Profile in the Vicinity of the North Alabama Lightning Mapping Array

The NASA Marshall Space Flight Center Lightning Nitrogen Oxides Model (LNOM) is applied to August 2006 North Alabama Lightning Mapping Array (LMA) data to estimate the raw (i.e., unmixed and otherwise environmentally unmodified) vertical profile of lightning nitrogen oxides, NOx = NO + NO 2 . This is part of a larger effort aimed at building a more realistic lightning NOx emissions inventory for use by the U.S. Environmental Protection Agency (EPA) Community Multiscale Air Quality (CMAQ) modeling system. Data from the National Lightning Detection Network TM (NLDN) is also employed. Overall, special attention is given to several important lightning variables including: the frequency and geographical distribution of lightning in the vicinity of the LMA network, lightning type (ground or cloud flash), lightning channel length, channel altitude, channel peak current, and the number of strokes per flash. Laboratory spark chamber results from the literature are used to convert 1-meter channel segments (that are located at a particular known altitude; i.e., air density) to NOx concentration. The resulting raw NOx profiles are discussed.

Koshak, William J.↗