SEARCH · Engineering Papers

Results for “Monolayer films”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Metal–Oxide Interface Sites Created Using Atomic Layer Deposition and Tested for CO Oxidation

The performance of catalysts made out of Pt supported on TiO 2 thin films grown on SBA-15 (a silica mesoporous material) by atomic layer deposition (ALD) was characterized systematically by combining in situ infrared absorption spectroscopy (IR) with other techniques including electron microscopy and adsorption−desorption isothermal measurements. The titania films in the resulting high-surface-area catalysts were evenly distributed throughout the inner surface of the SBA-15 mesopores, and their thickness could be controlled at a submonolayer level, with 3 to 4 TiO 2 ALD cycles needed for the complete coverage of the silica sites. The titania films could be deposited either before or after adding the metal (Pt), which was dispersed in the form of small nanoparticles (NPs) approximately 4−6 nm in diameter, in order to exert some control on the density and nature of the Pt/TiO 2 interface sites. One important lesson deriving from this work is that such an order of deposition leads to significantly different catalysts in spite of the fact that most of their structural properties are similar. If the Pt is deposited on the titania films, the resulting metal NPs are slightly smaller than those grown on silica and display CO adsorption sites with lower surface Pt coordination numbers. On the other hand, when TiO 2 is deposited on the Pt/SBA-15 starting material, some titania grows on the metal and partially blocks its surface while also creating new interface sites where CO binds more weakly and displays lower C−O stretching frequencies. In terms of catalytic performance, the results from in situ IR CO site titration and kinetic measurements combined suggest a mechanism where CO first adsorbs on Pt atop sites and then migrates to Pt/TiO 2 interface sites, where oxidation takes place. Both types of sites appear to be similar in all the catalysts tested, but catalytic performance could be optimized by tuning their surface densities. Maximum catalytic activity was obtained when the TiO2 films were deposited first and with TiO 2 coverages of at least half a monolayer, that is, after at least 2 ALD cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Heteroepitaxial control of thickness, strain, and domain architecture in few-layer ferroelectric tin monochalcogenides

Thin-film epitaxy and epitaxial strain have been widely exploited to tune domain configurations, switching behavior, and ferroic properties in conventional three-dimensional ferroelectric thin films; however, its application to controlling the properties of two-dimensional (2D) ferroelectrics has remained largely unexplored. Here, using SnX (X = Se, S) as a model system, we demonstrate heteroepitaxial control of thickness, strain state, and domain architecture in few-layer ferroelectric SnX via growth on monolayer MoS2 van der Waals (vdW) templates. Compared with conventional growth, MoS2-templated heteroepitaxy promotes epitaxial alignment, yielding ultrathin SnSe films with improved crystalline quality, full areal coverage, and enlarged lateral dimensions. Strong interfacial epitaxial coupling induces pronounced in-plane strain and stabilizes a hierarchical ferroelastic domain architecture, in which long-range 90° stripe domains are further subdivided into nanoscale rotational variants, as revealed by scanning transmission electron microscopy and synchrotron X-ray microscopy. Piezoresponse force microscopy and second-harmonic polarimetry confirm robust in-plane polarization, while ferroelectricity in SnSe is established through polarization-electric field hysteresis and nonvolatile ferroelectric resistive switching with on/off ratios approaching 1000. A nonvolatile, switchable ferroelectric diode effect further evidences direct coupling between polarization and charge transport. Notably, ferroelectric switchability exhibits a strong thickness dependence and is preserved only below ∼10 layers. This vdW heteroepitaxial strategy is further extended to ferroelectric SnS. The seamless heteroepitaxial integration of 2D ferroelectrics with CMOS-compatible, wafer-scale MoS2 templates provides a general and scalable route for strain-enabled structural and ferroelectric engineering in emerging memory and low-power optoelectronic applications.

Wang, Yueyin↗

DOE OSTI2025

Tuning the Magnetic Properties of CrI 3 Using Ni Thin Film Deposition for Applications in Spintronic Devices

Chromium triiodide (CrI 3 ), a van der Waals magnet, has recently been shown to host Ising ferromagnetism down to the monolayer limit. It is a potentially important material in 2D magnet-based applications, such as magnetic sensors and spintronic devices. Prior studies have revealed the coexistence of two different types of interlayer magnetic coupling, the antiferromagnetic (AFM) coupling near the surface and ferromagnetic (FM) coupling in the deep bulk layers, in pristine CrI 3 crystals below the Curie temperature. In this study, we used Ni thin film deposition to tune the surface magnetic states in bulk CrI 3 . A nanometer thickness (4 nm thick) of Ni was deposited on the surface of CrI 3 using electron-beam evaporation to form a Ni/CrI 3 heterostructure. The deposited Ni thin layer forms nanoclusters that completely cover the CrI 3 surface. Magnetic states of CrI 3 before and after Ni deposition are probed by ultralow-frequency magneto-Raman spectroscopy. Instead of seeing three spin wave branches in Raman scattering below 2 T, as in pristine bulk CrI 3 , in Ni/CrI 3 , we observe only a single spin wave branch, which is softened compared to that in pristine CrI 3 and displays a Zeeman shift under an out-of-plane magnetic field up to 7 T. This observation reveals that the AFM layers on pristine CrI 3 crystal surfaces transit into FM layers, so the entire CrI 3 crystal is in the FM state after Ni deposition. First-principles calculations show that Ni atoms tend to diffuse into the CrI 3 lattice, and the FM interlayer coupling has a much lower energy than AFM coupling in the presence of Ni atoms. As a result, our studies show that the magnetic state of CrI 3 can be modified through deposition of a thin metal layer on the surface, offering a route for controlling the spin degree of freedom in van der Waals magnets.

36 MATERIALS SCIENCE↗

NASA NTRS1972

Effects of electrostatic rocket material deposited on solar cells.

If solar arrays on solar-electric spacecraft protrude into the exhaust hemisphere of the electric thrusters, they will receive fluxes (usually small) of both propellant and accelerator grid atoms. Unlike propellants, grid materials have low vapor pressures and will not reevaporate. An analysis is presented of degradation in the optical, thermal, and electrical performance of solar cells resulting from thin deposits of grid material (aluminum and molybdenum) on various array surfaces. The classical optical theory of thin films, heat balance equations, and a typical relationship for solar cell efficiency vs temperature are used to compute curves showing optical properties, temperature, and power output as functions of film thickness. The results compare favorably with available experimental data. It is shown that a few monolayers of metal deposition on the illuminated surface will seriously degrade cell performance. A means of estimating the arrival rate of these materials is provided.

Kemp, R. F.↗

DOE OSTI2025

Enhanced biochemical sensing with high- Q transmission resonances in free-standing membrane metasurfaces

Optical metasurfaces provide solutions to label-free biochemical sensing by localizing light resonantly beyond the diffraction limit, thereby selectively enhancing light–matter interactions for improved analytical performance. However, high-Q resonances in metasurfaces are usually achieved in the reflection mode, which impedes metasurface integration into compact imaging systems. Here, we demonstrate a metasurface platform for advanced biochemical sensing based on the physics of the bound states in the continuum (BIC) and electromagnetically induced transparency (EIT) modes, which arise when two interfering resonances from a periodic pattern of tilted elliptic holes overlap both spectrally and spatially, creating a narrow transparency window in the mid-infrared spectrum. We experimentally measure these resonant peaks observed in transmission mode (Q ~ 734 at λ ~ 8.8 µm) in free-standing silicon membranes and confirm their tunability through geometric scaling. We also demonstrate the strong coupling of the BIC-EIT modes with a thinly coated PMMA film on the metasurface, characterized by a large Rabi splitting (32 cm -1 ) and biosensing of protein monolayers in transmission mode. Our new photonic platform can facilitate the integration of metasurface biochemical sensors into compact and monolithic optical systems while being compatible with scalable manufacturing, thereby clearing the way for on-site biochemical sensing in everyday applications.

Rosas, Samir [Univ. of Wisconsin, Madison, WI (Uni↗

DOE OSTI2025

An impermeable copper surface monolayer with high-temperature oxidation resistance

Despite numerous efforts involving surface coating, doping, and alloying, maintaining surface stability of metal at high temperatures without compromising intrinsic properties has remained challenging. Here, we present a pragmatic method to address the accelerated oxidation of Cu, Ni, and Fe at temperatures exceeding 200 °C. Inspired by the concept that oxygen (O) itself can effectively obstruct the pathway of O infiltration, this study proposes the immobilization of O on the metal surface. Through extensive calculations considering various elements (C, Al, Si, Ge, Ga, In, and Sn) to anchor O on Cu surfaces, Si emerges as the optimal element. The theoretical findings are validated through systematic sputtering deposition experiments. The introduction of anchoring elements to reinforce Cu–O bonds enables the formation of an atomically thin barrier on the Cu surface, rendering it impermeable to O even at high temperatures (400 °C) while preserving its intrinsic conductivity. This oxidation resistance, facilitated by the impermeable atomic monolayer, opens promising opportunities for researchers and industries to overcome limitations associated with the use of oxidizable metal films.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Innovative Interfacial Engineering for Simultaneous Enhancement in Efficiency, Stability, and Reliability in Perovskite Devices

The overarching objective of this project was to increase significantly the mechanical adhesion toughness of the key interfaces in PSCs, thereby improving the durability and reliability of PSCs and minimodules, while simultaneously enhancing their PCE. This is achieved by incorporating rationally-chosen self-assembled monolayers (SAMs) at key PSC interfaces. Inherently scalable methods for the deposition of MHP light-absorber thin films and SAMs are employed to ensure a viable path towards manufacturability. Furthermore, detailed understanding of mechanisms of PSCs and minimodules degradation, and SAMs-induced mitigation, is provided. As part of the project accomplishments, >60% increase in the adhesion toughness of the key PSC interfaces over their SAMs-free control counterparts was achieved. Also, PCEs >20% and >19% in rigid and flexible, respectively, single-junction PSCs (~1 cm 2 area) were achieved. It was shown that <20% PCE loss in flexible PSCs with SAMs can be achieved after bend testing. It was demonstrated that T80 (80% retention of initial PCE) of >5,000 hours in rigid PSCs (~1 cm2 area) can be achieved. Comprehensive understanding of the degradation mechanisms in PSCs was obtained. These strategies were adopted towards developing minimodules. PCE of >21% was obtained in an 6-cm 2 area minimodule, with T91 of 1,000 hours.

14 SOLAR ENERGY↗

DOE OSTI2025

Evaluating the Structural Response of Amphiphilic Monolayers to Environmental Stimuli

Amphiphilic monolayers composed of end groups with distinct polar and nonpolar functional groups offer rapid and reversible interfacial adaptation in response to environmental stimuli such as a change in interfacial medium polarity. We have synthesized and characterized a suite of monolayers with functional groups of competing polarity designed to reconfigure their interfacial chemical composition in response to solvent polarity. In these films, the end group is designed to be able to reorient and expose the functional groups that minimize the interfacial free energy between the film and the environment. Using a combination of spectroscopic, computational, and wettability studies, we have investigated the responsive interfacial behavior of different end groups upon exposure to environments with varying polarities. Contact angle measurements across a series of polar and dispersive probe liquids reveal trends that reflect the underlying molecular flexibility and composition. Vibrational sum frequency generation (SFG) spectroscopy and atomistic molecular dynamics (MD) simulations confirm solvent-driven reorientation of the end groups, with restructuring observed at the interface. To quantify these effects, we have developed a surface energy calculation model that incorporates solvent-induced surface rearrangements into the estimations. Our findings reveal a strong dependence of surface energy and switching behavior on the length and flexibility of the functionalities in the end group, which affects the exposure of certain interfacial compositions under different solvents. These results offer new insights into the design of adaptive monolayers and provide a framework for evaluating solvent-responsive surfaces.

functional groups↗

DOE OSTI2025

Spatially Enhanced Electrostatic Doping in Graphene Realized via Heterointerfacial Precipitated Metals

Forming heavily-doped regions in 2D materials, like graphene, is a steppingstone to the design of emergent devices and heterostructures. Here, a selective-area approach is presented to tune the work-function and carrier density in monolayer graphene by spatially synthesizing sub-monolayer gallium beneath the 2D-solid. The localized metallic gallium is formed via precipitation from an underlying diamond-like carbon (DLC) film that is spatially implanted with gallium-ions. By controlling the interfacial precipitation process with annealing temperature, spatially precise ambipolar tuning of the graphene work-function is achieved, and the tunning effect preserved upon cooling to ambient conditions. Consequently, charge carrier densities from ≈1.8 × 10 10 cm -2 (hole-doped) to ≈7 × 10 13 cm -2 (electron-doped) are realized, confirmed by in situ and ex situ measurements. The theoretical studies corroborated the role of gallium at the heterointerface on charge transfer and electrostatic doping of the graphene overlayer. Specifically, sub-monolayer gallium facilitates heavy n-doping in graphene. Extending this doping strategy to other implantable elements in DLC provides a new means of exploring the physics and chemistry of highly-doped 2D materials.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Atomic‐Scale Mechanisms of Nucleation and Stabilization in CuCrO 2 and CuFeO 2 Delafossite Thin Films on Al 2 O 3

Abstract Delafossite thin films exhibit a range of intriguing physical properties derived from their layered structure, which consists of alternating noble metal ( A + ) and ( B O 2 − ) sublayers in an AB O 2 stoichiometry. The integration of these properties into functional devices requires the successful epitaxial growth of delafossites as thin films on appropriate substrates. Unfortunately, their unique lattice geometry complicates growth, as different delafossites display variable behavior on the same substrate, often unrelated to lattice mismatch. This suggests the presence of yet unidentified stabilization mechanisms that enable the selective growth of certain delafossites, allowing them to be grown either as films themselves or to be used as buffer layers for subsequent deposition. In this study, advanced scanning transmission electron microscopy (STEM) is employed to investigate the nucleation mechanisms governing the stable growth of Cu‐based delafossites on Al 2 O 3 , specifically CuCrO 2 and CuFeO 2 thin films synthesized via molecular‐beam epitaxy. These findings reveal that a combination of a misfit dislocation network at the interface and monolayer‐deep chemical intermixing effectively relieves lattice mismatch strain. This mechanism, which differs fundamentally from that observed in Pd‐based delafossites, provides key insights into the controlled epitaxy of delafossite materials.

Scheid, Anna [Max Planck Institute for Solid State↗

DOE OSTI2025

Encapsulation of Monolayer 2D Materials Using Kinetic Energy-Controlled Pulsed Laser Deposition

The integration of monolayer (ML) two-dimensional (2D) materials into next-generation microelectronics, optoelectronics, and sensors is hindered by their sensitivity to environmental exposure. Deposition of additional layers for encapsulation or growth on ML 2D materials by versatile but energetic plasma techniques such as pulsed laser deposition (PLD) has not been considered at the monolayer level because of potential damage caused by hyperthermal species with kinetic energies (KEs) exceeding the threshold displacement energy (TDE) of the ML. Here, we describe a general strategy to understand and mitigate damage during PLD by reducing the incident KE of ablated species below the TDE of the 2D monolayer using background gas collisions. Ion flux diagnostics, combined with in situ Raman spectroscopy of monolayer graphene during PLD of amorphous boron nitride (a-BN) as a dielectric encapsulation layer, show that damage is primarily correlated with fast ions that penetrate the background gas in accordance with Beer’s Law and are often overlooked in ICCD imaging due to the dominance of the bright, delayed plasma luminescence. Significantly, if fast ions are eliminated and a ∼2 nm-thick a-BN layer is “soft landed”, the monolayer graphene is effectively protected from damage by high KE species in the boron nitride plasma plume. Deposited a-BN films display a characteristic dielectric constant of 3.6 at 100 kHz and tunable charge injection properties. Our results enable PLD as a viable option for encapsulation and thin film growth onto ML 2D materials, with implications for both fundamental research and device integration.

2D materials↗

DOE OSTI2025

Surface acoustic waves and lattice vibrations in two-dimensional Ti 3 ⁢C 2 ⁢𝑇 𝑥 (𝑇 =O, F) MXene films

We investigated surface acoustic wave (SAW) propagation and lattice vibrations in two-dimensional (2D) titanium carbide (Ti 3 ⁢C 2 ⁢𝑇 x ) MXene films as a function of surface termination and layer stacking, using atomistic simulations. We found that SAW propagation velocity is highly sensitive to both single-layer properties and interlayer bonding. Surface terminations significantly modulate wave behavior, with oxygen and fluorine terminations producing distinct effects on wave propagation, with oxygen-terminated monolayers exhibiting 20% higher wave speeds than fluorine counterparts due to strengthened intralayer bonds. Key observations include the transition from one to two layers causing wave speed variations, and the development of interlayer modes that generate more dispersed lattice vibrations. As the film layer thickness increases, SAW propagation becomes predominantly confined to the upper surface, with coherence of vibrational modes diminishing in multilayer structures. These findings suggest MXene terminations and layer stacking are crucial parameters for controlling SAW behavior, offering promising avenues for novel acoustic wave device applications.

2-dimensional systems↗

DOE OSTI2025

Controlling Selective C–O and C–H Bond Scission of Methanol by Supporting Pt on TiN and Mo 2 N Model Surfaces and Powder Catalysts

Transition metal nitrides (TMNs) have been explored as effective supports for Pt due to their Pt-like electronic properties. However, there is a lack of fundamental understanding regarding the behavior of Pt on different TMNs (Pt/TMN). Herein two TMNs, Mo 2 N and TiN, were modified with Pt and compared using methanol decomposition as a probe reaction via both ultrahigh vacuum (UHV) studies on thin films and ambient-pressure batch reactor studies of powder catalysts. Temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS) measurements were conducted under UHV conditions with Mo 2 N and TiN thin films. Mo 2 N was shown to favor C–H bond scission to form CO with a 56.2% selectivity, while TiN favored C–O bond scission to form CH 4 with a 74.5% selectivity. The addition of 0.9 monolayers (MLs) of Pt increased C–H bond scission selectivity to 89.7% and 49.2% for Mo 2 N and TiN respectively. Density functional theory (DFT) calculations on model surfaces revealed that the binding energy of O (BE *O ) was significantly reduced on Pt/TMNs, from −4.02 eV on Mo 2 N to −1.31 eV on Pt/Mo 2 N and −4.74 eV on TiN to −1.37 eV on Pt/TiN. As a result, C–O bond scission pathways were suppressed, leading to the preferential C–H bond scission that was observed experimentally. The C–O and C–H bond scission trends observed on thin films were then extended to powder catalysts, which demonstrated similar trends toward methanol decomposition. In conclusion, results from the current study establish that by combining UHV studies and DFT calculations over model surfaces, one can effectively predict the catalytic behavior of realistic TMN powder catalysts.

08 HYDROGEN↗

DOE OSTI2025

Intrinsic Defect-Induced Local Semiconducting-to-Metallic Regions Within Monolayer 1T-TiS2 Displayed by First-Principles Calculations and Scanning Tunneling Microscopy

Using density functional theory (DFT) and scanning tunneling microscopy (STM), the intrinsic point defects, formation energy, and electronic structure of 1T-TiS2 were investigated. Defect systems include single-atom vacancies, interstitial and adatom additions, and direct atomic substitution. Using a collective approach for analyzing realistic systems for point defect investigation, we provide a more straightforward comparison to the experimental measurements, reproducing more realistic environmental conditions related to thin film growth. STM images are compared to computationally simulated electron density images to identify specific geometries that result from favorable point defects. DFT suggests that titanium interstitials are the most energetically favorable intrinsic defect, and sulfur vacancies are more likely to form than titanium vacancies within this realistic analysis, which is in agreement with STM data. A pristine, stoichiometric monolayer system is calculated to have a direct band gap of 0.422 eV, which varies based on local point defects. Local semiconducting-to-metallic electronic transitions are predicted to occur based on the presence of Ti interstitials.

Keeney, P. J.↗

DOE OSTI2025

Phase transition in two-dimensional monolayer (1L)-molybdenum disulfide induced by atomic S-basal plane gliding via synchrotron X-ray monochromatic beam radiation for superior electronic performance

Here, in this work, we report a novel approach to reduce the channel resistance by inducing a phase transition behavior from 2H to 1T in a monolayer MoS 2 (1L-MoS 2 ) by a synchrotron X-ray monochromatic beam (mono-beam) radiation. The effects of the biphase structure by the mono-beam on the 1L-MoS2 film were investigated using Raman spectra, photoluminescence (PL) spectra, scanning tunneling microscopy, and scanning tunneling spectroscopy, respectively. Through material characterization, we identified that the lateral sliding of S-vacancies along the S-plane in the 1L-MoS 2 is the key reason for the origin of unidirectional phase transition. The precise phase engineering triggered by the mono-beam radiation process allows the realization of field-effect transistors (FET) with 2X improvement in mobility toward a high on/off ratio (~10 8 ) and a near-ideal subthreshold swing of ~88 mV per decade. The validity of the phase engineering could be further extended for its application as a memory device, exhibiting a gate tunable conduction modulation behavior and a high resistance ratio of ~10 2 at a gate bias of 5 V with endurance of ~100 cycles. Furthermore, an artificial neural network using the synaptic weight update with accuracy of ~93 % was achieved.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Substrate-Directed Dimensional and Phase Control of Peptide Assemblies on Two-Dimensional van der Waals Materials

Understanding and controlling biomolecular self-assembly on van der Waals (vdW) materials has the potential to advance hybrid bioelectronic devices by enabling precise tuning of the interface and modulation of the resulting electronic properties of the biomolecule-vdW heterostructure. However, how surface properties of vdW materials direct biomolecule assembly remains poorly understood. To fill this knowledge gap, we investigated the assembly of a peptide known to assemble into two-dimensional (2D) crystalline films on MoS 2 on three representative vdW surfaces: WS 2 , MoS 2 , and highly oriented pyrolytic graphite (HOPG). Using in situ atomic force microscopy (AFM), we find that assembly is substrate-dependent, resulting in multilayers on WS 2 , monolayers on MoS 2 , and multiple coexisting phases on HOPG. WS 2 exhibits a higher negative charge, strong long-range electrostatic interactions, and extensive hydration layering that may promote multilayer stacking. In contrast, MoS 2 has stronger short-range interactions with the peptides but much weaker long-range interactions and hydration structure, which may favor monolayer formation. Molecular dynamics simulations predict a corresponding switch from monolayer to multilayer aggregates of the adsorbed monomers, reflected in their relative mobilities. On hydrophobic HOPG, the peptides bind most strongly and remain as monomers with high surface mobility. The peptide dimers comprising the basic unit of the crystals are more compact on HOPG, which has a smaller lattice constant than WS 2 or MoS 2 , suggesting strain contributes to stabilizing multiple phases. Our results provide mechanistic insights into how surface charge and hydration structure, and the lattice structure of the substrates governs peptide assembly on vdW materials, offering a framework to rationally control the 2D peptide-vdW heterostructures.

Molecular dynamics simulations↗

DOE OSTI2025

Strontium‐Enriched Barite for Enhanced PbSO 4 Nucleation in Lead‐Acid Batteries

Abstract Barite (BaSO 4 ) crystals are an important additive in lead acid batteries due to their ability to promote the controlled nucleation and growth of anglesite (PbSO 4 ) during battery cycling. This is due to BaSO 4 ’s isostructural match with PbSO 4 , which facilitates epitaxial nucleation. However, BaSO 4 ’s efficacy as a nucleation promoter is limited by lattice mismatches between the two phases of 1–5%. Here, strontium‐enriched barite, (Ba,Sr)SO 4 , is synthesized to produce a nucleating promoter that displays an improved lattice match with PbSO 4 . Nucleation of PbSO 4 from Pb‐rich sulfuric acid solutions on strontium‐free and strontium‐enriched barite (up to 17 mol% Sr) is investigated using in‐situ atomic force microscopy and optical microscopy. At low strontium concentrations, PbSO 4 forms by the Stranski–Krastanov growth pathway (monolayer + island formation), with most nucleation occurring on edges and surface defects. At higher concentrations, the layer‐by‐layer growth mechanism known as Frank van‐der‐Merwe growth is observed, which allows for facile growth of continuous PbSO 4 films across the BaSO 4 surface. These films are successfully re‐dissolved on exposure to Pb‐free sulfuric acid. The results show that strontium incorporation fundamentally alters the mechanism of PbSO 4 nucleation on BaSO 4 , and thus provides a potential avenue for creating improved nucleation promoters in lead‐acid batteries.

Campbell, Colin T. [Pacific Northwest National Lab↗

DOE OSTI2025

The proximity effect and critical field behavior of Re/Al bilayers

Abstract We report the perpendicular critical field H c 2 properties of disordered Re-Al bilayers via magneto-transport measurements. The bilayers consisted of a d Re = 3 nm bottom layer of Re and an upper Al layer with thickness varying between d Al = 0 − 3 nm. We find that in this range of Al thicknesses, the bilayer transition temperature T c increases with increasing Al thickness, although their monolayer counterparts have T c Re > T c Al . Furthermore, H c 2 of the bilayers has a local maximum at an Al coverage of 1.5 nm with a critical field that is 50% larger than that of the standalone 3 nm Re film. At higher Al thicknesses H c 2 drops rapidly but remains more than an order of magnitude greater that that of comparable thickness standalone Al film. Our data show that a thin, disordered Re under-layer can dramatically increase the magnetic field tolerance of the Al over-layer. This would allow one to retain the desirable chemical and metallurgical properties of Al without sacrificing high field compatibility in quantum circuits, such as topological qubit devices and superinductor circuits.

Womack, F. N. (ORCID:0009000810391507)↗