Results for “Modeling workflow” — Page 3

NASA NTRSDate not supplied

Coupling a Computational Fluid Dynamics Model to a Spacecraft Thermal System Model for the DraMS Instrument Thermal Analysis

The Dragonfly Mass Spectrometer (DraMS) is an instrument on the Dragonfly mission, which will spend 7 years in deep space cruise before landing and operating on the surface of Titan. Vacuum thermal analyses are required for deep space cruise, and convection analyses are required for the Titan surface operations. Model exchanges across multiple thermal teams are needed for all phases of the mission. For DraMS, Thermal Desktop® (TD) has been the main thermal analytical tool of choice due to its capability in modeling complex thermal systems with relatively low computational power and for its availability across thermal teams. However, TD does not have computational fluid dynamics (CFD) capability and struggles to accurately capture complex convective behavior. DraMS has fans operating in tandem and gas flow behaviors are not easily predicted due to its complex flow paths. CFD software, such as Fluent, can model and predict such complex flow behaviors, but CFD models are computationally expensive, and its workflow processes are not tailored towards simulating large and complex systems. Therefore, a coupled modeling approach was chosen for DraMS: A TD model was used for simulating all the conductive, radiative, and source terms, while a Fluent CFD model was added on, as needed, to the TD model to provide the convective boundary conditions using the System Coupling software. The coupling software allows the TD and Fluent models to communicate data and arrive at a co-solved and co-converged solution. Furthermore, Thermal Iso-value Exchange (TIE) method was developed to facilitate and improve the TD-Fluent data exchange process. This paper will discuss the analytical studies that were done to verify the accuracy and usability of the coupled approach and the challenges associated, which lead to the development of the TIE approach. DraMS thermal design and co-solved analysis results will also be discussed.

Heat transfer↗

NASA NTRSDate not supplied

Coupling a Computational Fluid Dynamics (CFD) Model to a Spacecraft Thermal System Model for the DraMS Instrument Thermal Analysis

The Dragonfly Mass Spectrometer (DraMS) is an instrument on the Dragonfly mission, which will spend 7 years in deep space cruise before landing and operating on the surface of Titan. Vacuum thermal analyses are required for deep space cruise, and convection analyses are required for the Titan surface operations. Model exchanges across multiple thermal teams are needed for all phases of the mission. For DraMS, Thermal Desktop (TD) has been the main thermal analytical tool of choice due to its capability in modeling complex thermal systems with relatively low computational power and for its availability across thermal teams. However, TD does not have computational fluid dynamics (CFD) capability and struggles to accurately capture complex convective behavior. DraMS has fans operating in tandem and gas flow behaviors are not easily predicted due to its complex flow paths. CFD software, such as Fluent, can model and predict such complex flow behaviors, but CFD models are computationally expensive, and its workflow processes are not tailored towards simulating large and complex systems. Therefore, a coupled modeling approach was chosen for DraMS: A TD model was used for simulating all the conductive, radiative, and source terms, while a Fluent CFD model was added on, as needed, to the TD model to provide the convective boundary conditions using the System Coupling software. The coupling software allows the TD and Fluent models to communicate data and arrive at a co-solved and co-converged solution. Furthermore, Thermal Iso-value Exchange (TIE) method was developed to facilitate and improve the TD-Fluent data exchange process. This paper will discuss the analytical studies that were done to verify the accuracy and usability of the coupled approach and the challenges associated, which lead to the development of the TIE approach. DraMS thermal design and co-solved analysis results will also be discussed.

heat transfer↗

NASA NTRS2013

PROcess Based Diagnostics PROBE

Many of the aspects of the climate system that are of the greatest interest (e.g., the sensitivity of the system to external forcings) are emergent properties that arise via the complex interplay between disparate processes. This is also true for climate models most diagnostics are not a function of an isolated portion of source code, but rather are affected by multiple components and procedures. Thus any model-observation mismatch is hard to attribute to any specific piece of code or imperfection in a specific model assumption. An alternative approach is to identify diagnostics that are more closely tied to specific processes -- implying that if a mismatch is found, it should be much easier to identify and address specific algorithmic choices that will improve the simulation. However, this approach requires looking at model output and observational data in a more sophisticated way than the more traditional production of monthly or annual mean quantities. The data must instead be filtered in time and space for examples of the specific process being targeted.We are developing a data analysis environment called PROcess-Based Explorer (PROBE) that seeks to enable efficient and systematic computation of process-based diagnostics on very large sets of data. In this environment, investigators can define arbitrarily complex filters and then seamlessly perform computations in parallel on the filtered output from their model. The same analysis can be performed on additional related data sets (e.g., reanalyses) thereby enabling routine comparisons between model and observational data. PROBE also incorporates workflow technology to automatically update computed diagnostics for subsequent executions of a model. In this presentation, we will discuss the design and current status of PROBE as well as share results from some preliminary use cases.

PROBE↗

NASA NTRS2011

Performance Analysis of Cloud Computing Architectures Using Discrete Event Simulation

Cloud computing offers the economic benefit of on-demand resource allocation to meet changing enterprise computing needs. However, the flexibility of cloud computing is disadvantaged when compared to traditional hosting in providing predictable application and service performance. Cloud computing relies on resource scheduling in a virtualized network-centric server environment, which makes static performance analysis infeasible. We developed a discrete event simulation model to evaluate the overall effectiveness of organizations in executing their workflow in traditional and cloud computing architectures. The two part model framework characterizes both the demand using a probability distribution for each type of service request as well as enterprise computing resource constraints. Our simulations provide quantitative analysis to design and provision computing architectures that maximize overall mission effectiveness. We share our analysis of key resource constraints in cloud computing architectures and findings on the appropriateness of cloud computing in various applications.

Stocker, John C.↗

NASA NTRSDate not supplied

Modeling NASA’s Procedural Requirement Processes - Implications for Digital Future

The National Aeronautics and Space Administration (NASA) has an ongoing Digital Transformation effort and to leverage and showcase the power of Digital Transformation, an effort is underway to develop an integrated, datacentric, model representing NASA’s key process requirements. The task was divided into three phases: As Is modeling, Analysis, and To Be Planning. As part of this effort, a team has completed the first Phase I of the modeling task and is nearing completion of the second phase. This effort will capture the key elements as requirements, responsibilities, allocations, roles, products, and associated lifecycle elements. The scope of modeling included NASA’s NPR 7120.5 (Project and Program Management), NPR 7123.1 (Systems Engineering) and NPRs 8705.2 (Risk classification for Robotic Missions) and 8705.4 (Human-Rating Requirements for Space Missions). This paper will summarize the approach, scope, parsing patterns applied, metamodel, and associated workflows for the As-Is modeling. It will also summarize the results and insights gleaned during that phase, including the review process. These insights have informed the analysis and will be discussed. The analysis modeling phase will also be summarized including how the stakeholders were engaged, how the common elements were handled and dispositioned, and will also describe some of the plans for the future of NASA NPDs and NPRs.

Systems Engineering↗

NASA NTRS2017

Weather from 250 Miles Up: Visualizing Precipitation Satellite Data (and Other Weather Applications) Using CesiumJS

Geospatial weather visualization remains predominately a two-dimensional endeavor. Even popular advanced tools like the Nullschool Earth display 2-dimensional fields on a 3-dimensional globe. Yet much of the observational data and model output contains detailed three-dimensional fields. In 2014, NASA and JAXA (Japanese Space Agency) launched the Global Precipitation Measurement (GPM) satellite. Its two instruments, the Dual-frequency Precipitation Radar (DPR) and GPM Microwave Imager (GMI) observe much of the Earth's atmosphere between 65 degrees North Latitude and 65 degrees South Latitude. As part of the analysis and visualization tools developed by the Precipitation Processing System (PPS) Group at NASA Goddard, a series of CesiumJS [Using Cesium Markup Language (CZML), JavaScript (JS) and JavaScript Object Notation (JSON)] -based globe viewers have been developed to improve data acquisition decision making and to enhance scientific investigation of the satellite data. Other demos have also been built to illustrate the capabilities of CesiumJS in presenting atmospheric data, including model forecasts of hurricanes, observed surface radar data, and gridded analyses of global precipitation. This talk will present these websites and the various workflows used to convert binary satellite and model data into a form easily integrated with CesiumJS.

web applications↗

NASA NTRSDate not supplied

Augmenting Topic Finding in the NASA Aviation Safety Reporting System using Topic Modeling

Context: The NASA Aviation and Safety Reporting System (ASRS) provides various publications to the aviation community (including individual anonymous reports, Callback, Database Search Requests, Directline, and Alerting Messages). Key to these publications are the timely processing of new reports, which is currently done mostly manually by ASRS staff, and which the volume increases yearly. Aim: We investigate whether existing topic modelling techniques are suitable to ease some of the manual effort, and to enhance it with additional visual cues regarding the process of grouping, sense making and labeling incoming (and previous) reports. Method: We evaluate the applicability of WarpLDA topic modelling results combined with three visualization tools, the first two of which have been extended by us in this work for ASRS: Termite, TopicFlow, and LDAVis. Based on the identified limitations in these tools, we propose a methodology for improving them, and evaluate their outputs using ASRS as our test dataset. Results: The user interfaces of Termite, Topicflow and LDAVis were found insufficient for sense-making of the narratives. Moreover, concerns regarding the stability of results due to the inherent randomness of topic modelling, and the lack of a measurable approach for evaluation against the existing ASRS manual workflow were also noted. Conclusion: While many tools to topic modeling and visualization have been proposed, more work is necessary before they can be applied in practical situations to improve existing manual workflows. The methodology presented and applied in this work contribute towards this effort.

ASRS↗

NASA NTRSDate not supplied

AI Curation Methods for NASA Scientific Data

The NASA Open Science Data Repository (OSDR) serves as a central hub for sharing and accessing NASA's vast collection of scientific data, supporting researchers across diverse fields. To enhance the efficiency, accuracy, and accessibility of this data, we are leveraging advanced artificial intelligence (AI) techniques as part of the AI for Curation project. By integrating large language models (LLMs) into our data curation workflow, we aim to streamline the entire process—from data submission to user interaction. This initiative focuses on improving key areas, including data ingestion, curation, and user engagement with curated datasets, impacting multiple domains and a wide user base. First, we are developing tools that can automatically parse data in various formats, using LLMs to convert unstructured data into structured, standardized formats. This reduces the manual effort required for curation, allowing curators to focus on more critical scientific analyses. Additionally, AI and machine learning (ML) models are being implemented to automate data validation and verification, ensuring the highest standards of data quality and reliability. Finally, we are creating a conversational AI agent to interact with the curated scientific studies in OSDR, helping users easily navigate the repository and access relevant data. By enhancing data discoverability and accessibility, these advancements will foster new research opportunities and promote the principles of open science.

Walter Alvarado↗

NASA NTRS2021

Perceive: Proactive Exploration of Risky Concept Emergence for Identifying Vulnerabilities & Exposures

National databases that collect various kinds of textual threat reports such as ASRS, CERT, and NVD manually process their reports individually. They then offer data products to disseminate the aggregate information, like newsletters, alerts or individual report searching. The goal of this research is to connect these individual reports thematically and temporally to identify emerging or recurring threats, by analyzing large collections of text, source code, collaboration and communication patterns. This capability, I argue, enables us to identify the emergence and recurrence of such themes, and the contexts in which they re-occur, facilitating faster and more capable mitigation. I propose two models to shed light on this goal: An empirical model of vulnerabilities as bugs, the commit flow model, and one of the vulnerabilities and aviation safety threats as topics, the topic flow model. I use as gold standard existing manual workflows in both domains, reflected in the existing data products by these organizations, and empirically evaluate if the automated model scan match or outperform existing manual practices.

ASRS↗

NASA NTRS2014

Path Toward a Unifid Geometry for Radiation Transport

The Direct Accelerated Geometry for Radiation Analysis and Design (DAGRAD) element of the RadWorks Project under Advanced Exploration Systems (AES) within the Space Technology Mission Directorate (STMD) of NASA will enable new designs and concepts of operation for radiation risk assessment, mitigation and protection. This element is designed to produce a solution that will allow NASA to calculate the transport of space radiation through complex computer-aided design (CAD) models using the state-of-the-art analytic and Monte Carlo radiation transport codes. Due to the inherent hazard of astronaut and spacecraft exposure to ionizing radiation in low-Earth orbit (LEO) or in deep space, risk analyses must be performed for all crew vehicles and habitats. Incorporating these analyses into the design process can minimize the mass needed solely for radiation protection. Transport of the radiation fields as they pass through shielding and body materials can be simulated using Monte Carlo techniques or described by the Boltzmann equation, which is obtained by balancing changes in particle fluxes as they traverse a small volume of material with the gains and losses caused by atomic and nuclear collisions. Deterministic codes that solve the Boltzmann transport equation, such as HZETRN [high charge and energy transport code developed by NASA Langley Research Center (LaRC)], are generally computationally faster than Monte Carlo codes such as FLUKA, GEANT4, MCNP(X) or PHITS; however, they are currently limited to transport in one dimension, which poorly represents the secondary light ion and neutron radiation fields. NASA currently uses HZETRN space radiation transport software, both because it is computationally efficient and because proven methods have been developed for using this software to analyze complex geometries. Although Monte Carlo codes describe the relevant physics in a fully three-dimensional manner, their computational costs have thus far prevented their widespread use for analysis of complex CAD models, leading to the creation and maintenance of toolkit-specific simplistic geometry models. The work presented here builds on the Direct Accelerated Geometry Monte Carlo (DAGMC) toolkit developed for use with the Monte Carlo N-Particle (MCNP) transport code. The workflow for achieving radiation transport on CAD models using MCNP and FLUKA has been demonstrated and the results of analyses on realistic spacecraft/habitats will be presented. Future work is planned that will further automate this process and enable the use of multiple radiation transport codes on identical geometry models imported from CAD. This effort will enhance the modeling tools used by NASA to accurately evaluate the astronaut space radiation risk and accurately determine the protection provided by as-designed exploration mission vehicles and habitats

Lee, Kerry↗

NASA NTRS2016

Exposing Hidden Parts of the SE Process: MBSE Patterns and Tools for Tracking and Traceability

An interesting benefit of applying Model-Based Systems Engineering (MBSE) is that the rigor and coordination intrinsic to MBSE forces us to apply Systems Engineering to our own traditional activities, processes, and products, which results in richer, more expressive models, more powerful reasoning, and a clearer and more effective Systems Engineering (SE) process. Our MBSE frameworks and languages contain semantic richness sufficient to describe our systems at any particular point in time, often with an emphasis on the description of the system at major milestones. This is unarguably a real asset. However, when we apply MBSE in service of missions that are in development, rapidly evolving, of a larger scale, and where interpersonal communication is a critical part of the design process, we discover that our frameworks and languages are still not quite rich enough to enable us to ask the kinds of questions and get the kinds of answers we want in order to address the concerns of day to day work. This paper will discuss some patterns and tools we have developed to help address some of the not-always-explicit SE concerns that we have identified through our MBSE work. Particularly, this paper will discuss flexible yet practical methods for defining and capturing maturity, workflow, and agreement traceability within our system models, extensible ways to perform and track model audits, and ways to report and interact with this knowledge in the context of MBSE applied to support NASA’s Europa Project.

Jackson, Maddalena↗

NASA NTRS2016

Exposing Hidden Parts of the SE Process: MBSE Patterns and Tools for Tracking and Traceability

An interesting benefit of applying Model-Based Systems Engineering (MBSE) is that the rigor and coordination intrinsic to MBSE forces us to apply Systems Engineering to our own traditional activities, processes, and products, which results in richer, more expressive models, more powerful reasoning, and a clearer and more effective Systems Engineering (SE) process. Our MBSE frameworks and languages contain semantic richness sufficient to describe our systems at any particular point in time, often with an emphasis on the description of the system at major milestones. This is unarguably a real asset. However, when we apply MBSE in service of missions that are in development, rapidly evolving, of a larger scale, and where interpersonal communication is a critical part of the design process, we discover that our frameworks and languages are still not quite rich enough to enable us to ask the kinds of questions and get the kinds of answers we want in order to address the concerns of day to day work. This paper will discuss some patterns and tools we have developed to help address some of the not-always-explicit SE concerns that we have identified through our MBSE work. Particularly, this paper will discuss flexible yet practical methods for defining and capturing maturity, workflow, and agreement traceability within our system models, extensible ways to perform and track model audits, and ways to report and interact with this knowledge in the context of MBSE applied to support NASA’s Europa Project

Jackson, Maddalena↗

NASA NTRS2019

Geometry Modeling for Unstructured Mesh Adaptation

The quantification and control of discretization error is critical to obtaining reliable simulation results. Adaptive mesh techniques have the potential to automate discretization error control, but have made limited impact on production analysis workflow. Recent progress has matured a number of independent implementations of flow solvers, error estimation methods, and anisotropic mesh adaptation mechanics. However, the poor integration of initial mesh generation and adaptive mesh mechanics to typical sources of geometry has hindered adoption of adaptive mesh techniques, where these geometries are often created in Mechanical Computer- Aided Design (MCAD) systems. The difficulty of this coupling is compounded by two factors: the inherent complexity of the model (e.g., large range of scales, bodies in proximity, details not required for analysis) and unintended geometry construction artifacts (e.g., translation, uneven parameterization, degeneracy, self-intersection, sliver faces, gaps, large tolerances be- tween topological elements, local high curvature to enforce continuity). Manual preparation of geometry is commonly employed to enable fixed-grid and adaptive-grid workflows by reducing the severity and negative impacts of these construction artifacts, but manual process interaction inhibits workflow automation. Techniques to permit the use of complex geometry models and reduce the impact of geometry construction artifacts on unstructured grid workflows are models from the AIAA Sonic Boom and High Lift Prediction are shown to demonstrate the utility of the current approach.

Park, Michael A.↗

NASA NTRSDate not supplied

Entwine Point Tiles for 3D Visualization and Querying of ICESat-2

Point Cloud data from non-optical sensors present challenges in scientific computing in both volume of data and files, even for cloud services environments. As part of the Multi-Mission Algorithm and Analysis Platform (MAAP), a joint open science platform for global biomass modelling, we’ve developed a cloud optimized workflow for using ATL08 (ICESat-2) data as a point cloud. For MAAP, the ATL08 data product is published as Entwine Point Tiles (EPT), allowing users to visualize and query the full extent of this collection interactively without pre-downloading, or preprocessing. The EPT format is a cloud-optimized point cloud data format which re-organizes points into a cloud friendly spatially indexed data structure. MAAP uses AWS S3 to store these point clouds and serves them over OGC specified APIs, 3DTiles for visualization, and WFS for querying. This workflow allows for interactive 3D visualizations in a web browser, including notebook environments and facilitates on the fly subsetting for interactive data exploration, all of which can be applied to other similar sensors.

Alex Mandel↗

NASA NTRSDate not supplied

Updates to PATO’s Thermo-Mechanical Model

The solid mechanics module within the Porous material Analysis Toolbox (PATO) material response code was updated to model the stress contribution from both internal pressure and pyrolysis shrinkage as function of material’s decomposition. Incorporating these physical phenomena, alongside the previously included temperature dependent mechanical properties, thermal expansion, and aerodynamic loads, allows for a more accurate thermo-mechanical behavior modeling of Thermal Protection System (TPS) materials, which is critical to assess spallation risks during atmospheric entry. This poster outlines the workflow for obtaining the necessary PATO inputs, derived from dilatometry experiments, which are used to model the stress field in TPS materials due to thermal expansion and pyrolysis shrinkage. Furthermore, to analyze the relevance of the stress contribution from the internal pressure, a study was conducted using TACOT with different permeability values.

TPS↗

NASA NTRSDate not supplied

Natural Language Processing Analysis of Notices to Airmen for Air Traffic Management Optimization

With new emerging technologies in the field of NLP, we explore their applications to digitize and analyze heritage Air Traffic Management (ATM) documents for planning and optimizing airspace operations. Specifically, this research focuses on harvesting semi-structured or un-structured information contained in Notices to Airmen (NOTAMs). Using NLP and other advanced data analytics, we will construct a data-driven framework which facilitates finding language patterns and the use of pretrained language models for classification and extraction of useful airspace constraints and restrictions. These may lead to tools that assist airspace users in understanding the constraints more efficiently, contributing to better route planning and safer execution. This paper explores three workflows entailing different NLP tasks. First, unsupervised techniques like word embedding and topic modeling are used for pattern finding and document classification. Second, a dataset is created by extracting information from the semi-structured NOTAM format as metadata for categorizing, visualizing, and extracting key entities driving NOTAM content. Third, modern pre-built deep learning based transformer models such as BERT, RoBERTa, and XLNet are evaluated on the question answering task, an even more robust approach to information extraction, as well as their respective fine-tuning tasks. In this work we include various performance metrics for the trained models to evaluate both accuracy and precision and we show that the models can be generalized for their respective tasks. The research work developed shows promise in uncovering trends in digital NOTAMs in the NAS and also offers a new framework for digitizing and inferring insights from free-form legacy NOTAMs, that are yet to be digitized.

Natural Language Processing↗

NASA NTRSDate not supplied

Natural Language Processing (NLP) Analysis of NOTAMs for Air Traffic Management Optimization

With new emerging technologies in the field of NLP, we explore their applications to digitize and analyze heritage Air Traffic Management (ATM) documents for planning and optimizing airspace operations. Specifically, this research focuses on harvesting semi-structured or un-structured information contained in Notices to Airmen (NOTAMs). Using NLP and other advanced data analytics, we will construct a data-driven framework which facilitates finding language patterns and the use of pretrained language models for classification and extraction of useful airspace constraints and restrictions. These may lead to tools that assist airspace users in understanding the constraints more efficiently, contributing to better route planning and safer execution. This paper explores three workflows entailing different NLP tasks. First, unsupervised techniques like word embedding and topic modeling are used for pattern finding and document classification. Second, a dataset is created by extracting information from the semi-structured NOTAM format as metadata for categorizing, visualizing, and extracting key entities driving NOTAM content. Third, modern pre-built deep learning based transformer models such as BERT, RoBERTa, and XLNet are evaluated on the question answering task, an even more robust approach to information extraction, as well as their respective fine-tuning tasks. In this work we include various performance metrics for the trained models to evaluate both accuracy and precision and we show that the models can be generalized for their respective tasks. The research work developed shows promise in uncovering trends in digital NOTAMs in the NAS and also offers a new framework for digitizing and inferring insights from free-form legacy NOTAMs, that are yet to be digitized. Video is an mp4 download, with a play time of 9 min 35 secs.

Natural Language Processing↗

NASA NTRS2014

Coupled Solid Rocket Motor Ballistics and Trajectory Modeling for Higher Fidelity Launch Vehicle Design

Multi-stage launch vehicles with solid rocket motors (SRMs) face design optimization challenges, especially when the mission scope changes frequently. Significant performance benefits can be realized if the solid rocket motors are optimized to the changing requirements. While SRMs represent a fixed performance at launch, rapid design iterations enable flexibility at design time, yielding significant performance gains. The streamlining and integration of SRM design and analysis can be achieved with improved analysis tools. While powerful and versatile, the Solid Performance Program (SPP) is not conducive to rapid design iteration. Performing a design iteration with SPP and a trajectory solver is a labor intensive process. To enable a better workflow, SPP, the Program to Optimize Simulated Trajectories (POST), and the interfaces between them have been improved and automated, and a graphical user interface (GUI) has been developed. The GUI enables real-time visual feedback of grain and nozzle design inputs, enforces parameter dependencies, removes redundancies, and simplifies manipulation of SPP and POST's numerous options. Automating the analysis also simplifies batch analyses and trade studies. Finally, the GUI provides post-processing, visualization, and comparison of results. Wrapping legacy high-fidelity analysis codes with modern software provides the improved interface necessary to enable rapid coupled SRM ballistics and vehicle trajectory analysis. Low cost trade studies demonstrate the sensitivities of flight performance metrics to propulsion characteristics. Incorporating high fidelity analysis from SPP into vehicle design reduces performance margins and improves reliability. By flying an SRM designed with the same assumptions as the rest of the vehicle, accurate comparisons can be made between competing architectures. In summary, this flexible workflow is a critical component to designing a versatile launch vehicle model that can accommodate a volatile mission scope.

Ables, Brett↗