Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MoS2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Characterization of Electronic Stress-Induced Changes in Multilayer MoS 2

Transition metal dichalcogenides like molybdenum disulfide (MoS 2 ) are compelling for next-generation electronic devices. In this work, we investigate the impact of electronic stress on MoS 2 to illustrate that observational and phenomenological information on multiple devices can be useful to describe changes in the device, and caution against the rationalization of paltry results as representative or correlative to device behavior. Here, we stress MoS 2 by applying a sustained 20 V DC bias to study the material’s response. Post-stress electronic characterization revealed nonuniform shifts in current–voltage (I–V) behavior alongside microscale changes. Complementary mechanical, spectroscopic, and scanning microwave impedance measurements showed that stress-induced features locally modulate stiffness, surface potential, Raman intensity, and charge carrier density. We correlated I–V behavior with morphological features (wrinkles, tears, folds, height) and device-level geometry (MoS 2 overlap with electrodes, channel area, contact length) on 50 test structures across five chips to move beyond anecdotal conclusions. We found no universal correlations before DC stress. However, device-level geometry was correlated with I–V behavior after DC stress, suggesting that electrode contacts play a more dominant role than morphology in determining performance. Delamination and thinning induced by DC stress led to localized reductions in charge carrier density within the affected regions. Further, delamination and thinning appear to map to I–V device performance in a few samples, but the correlation is lost when a larger sample size is considered. This suggests significant sample-to-sample variability in surface electronic states of the test structures. We also discuss how environmental factors introduced during fabrication may contribute to the observed heterogeneous device response. Progress will require high-resolution, multimodal analysis across many samples constructed under controlled, clean conditions. By building data sets that capture variability, we can better identify the true drivers of performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Elucidating the Discharge Behavior of Aqueous Zinc Sulfur Batteries in the Presence of Molybdenum(IV) Chalcogenide Catalyst: The Criticality of Interfacial Electrochemistry

The aqueous zinc-sulfur battery holds promise for significant capacity and energy density with low cost and safe operation based on environmentally benign materials. However, it suffers from the sluggish kinetics of the conversion reaction. Here, we highlight the efficacy of molybdenum(IV) sulfide (MoS 2 ) to reduce the overpotential of S-ZnS conversion in aqueous electrolytes and study the discharge products formed at the solid-solid and solid-liquid interfaces using experimental and theoretical approaches. Specifically, the MoS 2 -catalyzed electrochemical conversion reaction is characterized via ex situ X-ray diffraction (XRD), transmission electron microscopy (TEM) with energy dispersive spectroscopy (EDS), Raman spectroscopy, synchrotron-based Mo K-edge X-ray absorption spectroscopy (XAS), and in situ synchrotron-based X-ray computed tomography (XCT). Additionally, operando synchrotron-based S K-edge XAS and X-ray fluorescence (XRF) maps are collected to determine the spatial evolution of sulfur-based species at the electrode-electrolyte interface. Further, coupling the operando S K-edge XAS data with the simulated spectra and fitting the data suggested a possible ZnS 2 intermediate phase.

25 ENERGY STORAGE↗
DOE OSTI2025

Microstructural Assessment of Molybdenum Disulfide Coatings Using Nanoindentation Hardness

MoS 2 coatings are used extensively in aerospace and defense applications due to their ultralow friction and high wear resistance. Burnished and resin-bonded MoS 2 coatings are commonly used in these applications due to simplicity in deposition and history of use, despite issues with consistency in coating properties and performance. Physical vapor deposition (PVD) of MoS 2 thin films has emerged as a process alternative in the past 50 years, promising far greater control over film structure and composition but at a greater cost. Despite PVD’s benefits, hesitance to adoption persists in high-consequence applications, not only due to increased costs but variability in resulting coating properties. These variations in properties and subsequent performance are in part due to the complexity of the PVD process and the sensitive interplay between coating process-structure-property relationships. This work aims to demystify the remaining uncertainties of the process-structure-property relationships in PVD MoS 2 . The microstructure and mechanical and tribological properties of 61 different PVD pure MoS 2 coatings are examined herein. Emphasis has been placed on developing performance-based (i.e., hardness, modulus) metrics that can assess microstructural changes (density, orientation, and crystallinity) and be utilized to accelerate process development and coating optimization. Relationships established within suggest that nanoindentation hardness can be used to infer coating performance (i.e., wear rate) and properties (i.e., density, crystalline texture, and stoichiometry). Furthermore, this work demonstrates that PVD MoS 2 coatings close to the theoretical density of MoS 2 consistently have the best tribological performance and can be reliably identified by their hardness.

MoS2↗
DOE OSTI2025

Self-Sensing Composites via an Embedded 3D-Printed PVDF-MoS 2 Nanosensor for Structural Health Monitoring

Carbon fiber (CF)-reinforced epoxy composites are widely used in vehicle applications, where early damage detection is crucial for reliability and safety. To address this need, we developed a self-sensing epoxy/CF composite by embedding a PVDF-MoS 2 nanosensor via an embedded 3D printing method. By harnessing the intrinsic curing kinetics of epoxy, we tailored its rheological properties to optimize the embedded printing process, enabling precise and reliable support for sensor filaments without compromising the composite’s structural and functional integrity. Through comprehensive rheological and kinetic analysis, we established a quantitative relationship among curing temperature, conversion rate, and resulting yield modulus─defining a narrow processing window essential for successful sensor integration. Specifically, we identified that an epoxy yield modulus range of 180–294 Pa and a conversion rate below 10% are critical to support the PVDF-MoS 2 filament architecture. Here, this embedded 3D printing method produces complex and multimaterial PVDF-MoS 2 sensors within an epoxy matrix with minimal deformation and reduced postprocessing, which is scalable and adaptable for industrial applications. Under cyclic loading, the embedded sensors exhibited stable signals under constant loads and increased voltage signals in response to crack formation (17–35% higher) and catastrophic failure (1 order of magnitude higher), effectively capturing structural changes in real time. This study demonstrates the potential of PVDF-MoS 2 nanocomposite sensor materials for real-time structural health monitoring in epoxy–CF composite systems, enabling early detection of defects and stress anomalies, significantly reducing the risk of unexpected failures, and enhancing structural reliability.

PVDF-MoS2 sensor↗
DOE OSTI2026

Small Molecule Inhibitor-Modulated Al 2 O 3 Atomic Layer Deposition on Monolayer MoS 2 for Controlled Nucleation

The integration of ultrathin dielectrics on two-dimensional (2D) semiconductors is essential for advancing beyond-Si electronics. However, the intrinsic inertness of van der Waals 2D basal planes remains a primary bottleneck to achieving uniform dielectric nucleation and growth. Here, in this study, we introduce a small molecule inhibitor (SMI)-modulated thermal atomic layer deposition (ALD) strategy, exemplified by aluminum oxide (Al 2 O 3 ) ALD on monolayer molybdenum disulfide (1L MoS 2 ) with acetic acid (HAc) SMI. The ABC-type sequence comprises HAc inhibitor (A), trimethylaluminum (TMA) precursor (B), and deionized H 2 O coreactant (C). In situ quartz crystal microbalance (QCM) studies reveal robust HAc adsorption on Al 2 O 3 and suppression of subsequent oxide growth on HAc-passivated surfaces. When applied to 1L MoS 2 , this inhibitory pathway enables HAc to selectively passivate nascent Al 2 O 3 nuclei formed on the MoS 2 surface, limiting their three-dimensional (3D) island coarsening and redirecting precursor adsorption toward the uncovered basal plane. Consequently, nearly continuous ultrathin (∼1.5 nm) Al 2 O 3 films are achieved on 1L MoS 2 with markedly improved uniformity compared to standard Al 2 O 3 ALD using TMA and H 2 O, as validated by atomic force microscopy (AFM), cross-sectional scanning transmission electron microscopy (STEM), and energy-dispersive X-ray spectroscopy (EDS). Density functional theory (DFT) calculations further provide atomistic insight into HAc-modulated Al 2 O 3 nucleation, corroborating the energetic preference of HAc for Al 2 O 3 over MoS 2 and attenuated TMA adsorption on HAc-passivated surfaces. Spatially resolved Raman spectroscopy also confirms that the HAc-modulated process preserves the structural integrity of 1L MoS 2 , with only minimal strain and doping perturbations observed after dielectric deposition. This SMI-modulated approach offers a broadly applicable framework for controlling ALD nucleation across various inhibitors, ALD chemistries, and 2D materials, opening opportunities for reliable dielectric integration in next-generation nanoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tailoring Piezoelectricity of 3D Printing PVDF-MoS 2 Nanocomposite via In Situ Induced Shear Stress

3D printing of unique structures with tunable properties offers significant advantages in the fabrication of complex and customized electronic devices. Here, this study introduces a process-microstructure–property-guided manufacturing route to fabricate PVDF-2D MoS 2 piezoelectric nanocomposites with tunable piezoelectric properties without having a postprocess. We control PVDF’s microstructure through direct ink writing (DIW) 3D printing while tuning PVDF-MoS 2 interfacial strain by controlling rheology and 3D printing parameters, such as nozzle size and printing speed. Our approach demonstrates tunable piezoelectricity in PVDF-MoS 2 , achieving a 15-fold increase in the piezoelectric coefficient (d 33 ) at a printing-induced shear stress of 6685 Pa. This enhancement arises from the electrostatic interactions between PVDF and MoS 2 and the filler distribution and alignment caused by the in situ shear stress in 3D printing, as confirmed by XPS and Raman mapping analyses. Our findings advance the understanding of piezoelectric mechanisms in PVDF-based nanocomposites, laying the foundation for 3D printing of piezoelectric sensors in wearable device applications with enhanced performance and customization capabilities.

2D MoS2↗
DOE OSTI2025

Raman Laser-Induced Structural Modification in CVD-Grown Monolayer MoS 2 for Multi-Purposed Nanofabrication

Molybdenum disulfide (MoS 2 ) has been extensively explored to be utilized as an electronic material in a variety of device applications. In particular, the tunability of MoS 2 enhances its electrical properties making it an intriguing candidate for field-effect transistors (FETs), while also extending beyond electrical properties to structural phase engineering. Laser-induced modifications, particularly with Raman lasers, offer a straightforward method to modulate materials via thermal processes with precise patterning control and energy-level flexibility. However, most studies on the modification of MoS 2 have focused on multilayered structures or have been conducted under low-power laser conditions, leaving the feasibility of structural modifications in monolayer MoS 2 elusive. In this study, we fundamentally elucidated the effects of high-power Raman laser irradiation on the surface of chemical vapor deposition (CVD)-grown monolayer MoS 2 under ambient conditions and uncovered the underlying mechanisms of laser-induced modifications by applying intense photon energy with highly interactive reactions. Our results revealed both etching and deposition phenomena in two discernible regions, and it can be demonstrated by intensity regimes based on the spatial distribution of laser irradiance within the laser-irradiated spot. Furthermore, phase transition was found to be inhibited due to the promoted oxidation and the deposition of hydrogenated amorphous carbon (a-C:H), and p-type doping was observed, likely occurring in the region beneath the a-C:H deposition as substitutional doping on the 2H phase of MoS 2 . To compare the thermal effects, MoS 2 modifications were further analyzed using simplified heat transfer estimations. In conclusion, these findings deepen our understanding of how Raman laser irradiation modifies MoS 2 under ambient conditions, providing guidelines for optimizing its modification processes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermal-Strain-Enabled Enhanced Emission from UV Laser-Induced Defect Levels near the Surface of Multilayer MoS 2

Monolayer two-dimensional (2D) materials have been intensively studied while research on multilayers is still in its infancy. Here, we induce defects inside bulk MoS 2 through thermal annealing and near the surface of multilayer MoS 2 using 375 nm laser irradiation, and investigate their photoluminescence (PL) and fluorescence lifetime imaging (FLIM). Enhanced emission is limited within a certain MoS 2 thickness. The observed enhanced emission is evidenced by a threshold behavior in super-linear PL intensity increase, strong polarization effects, and increased lifetime of defect peak. The laser power threshold for enhanced emission is much smaller in defects near the surface than that inside the bulk of multilayer MoS 2 . The mechanical strain from a wrinkle of the sample further lowers the laser power threshold for enhanced emission. By exciting with a 639 nm laser that is close to the fundamental gap between the conduction band minimum and the valence band maximum, the lifetime of defect enhanced emission increased by 5 times. Furthermore, one of the competing indirect bandgap emissions disappears, and the defect emission peak dominates the PL spectrum in the wrinkle area with a strain. Furthermore, the discovered principle can be applied to future studies on the integration of enhanced emission and single photon emission involving selectively depopulating the conduction band of the host crystal to defect levels for quantum emitters.

2D materials↗
DOE OSTI2024

Functionalization of Monolayer MoS 2 with Layered Multimolecular Architectures

Two dimensional van der Waals materials have attracted attention due to their unique properties that arise in the monolayer versus bulk limits. Monolayer MoS 2 has been at the forefront of 2D materials due to its broad applicability in catalysis, photovoltaics, and spintronics. To realize the capabilities of MoS 2 enabled technology, it is necessary to engineer interfaces where charge carriers can be funneled toward or away from the surface. Molecular systems are a versatile strategy to enable this. Ion-linked molecular architectures have been used previously to circumvent difficult and taxing synthetic methods. Here, we demonstrate the growth of metal ion-linked bilayers (ILBs) on monolayer MoS 2 consisting of a first layer spacer (4-mercaptobenzoic acid, MBA) with a Zn(II) ion linked to a fluorophore (BODIPY). Using a combination of Atomic Force Microscopy and Raman spectroscopy, we resolved intrinsic S-vacancies in the MoS 2 lattice via S–H bond breaking of MBA. X-ray Photoelectron Spectroscopy confirmed that Zn(II) acetate can coordinate to carboxylate groups on MBA. Furthermore, with photoluminescence microscopy, we determined that BODIPY emission is observable only in the presence of a metal ion, confirming the growth of a multimolecular ion-linked supramolecular assembly on MoS 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Biaxial Tensile Strain Enhances Electron Mobility of Monolayer Transition Metal Dichalcogenides

Strain engineering can modulate the material properties of two-dimensional (2D) sem- iconductors for electronic and optoelectronic applications. Recent theory and experiments have found that uniaxial tensile strain can improve the electron mobility of monolayer MoS 2 , a 2D semiconductor, but the effects of biaxial strain on charge transport are not well-understood in 2D semiconductors. Here, we use biaxial tensile strain on flexible substrates to probe the electron mobility in monolayer WS 2 and MoS 2 transistors. Further, this approach experimentally achieves ~2× higher on-state current and mobility with ~0.3% applied biaxial strain in WS 2 , the highest mobility improvement at the lowest strain reported to date. We also examine the mechanisms behind this improvement through density functional theory simulations, concluding that the enhancement is primarily due to reduced intervalley electron-phonon scattering. These results underscore the role of strain engineering 2D semiconductors for flexible electronics, sensors, integrated circuits, and other opto-electronic applications.

2D materials↗
DOE OSTI2024

Template-Assisted Growth of High-Quality α-Phase FAPbI 3 Crystals in Perovskite Solar Cells Using Thiol-Functionalized MoS 2 Nanosheets

Formamidinium lead iodide (FAPI) has gained attention for hybrid perovskite solar cell (PSC) applications due to its enhanced stability and narrow bandgap. However, a significant challenge remains in inducing and stabilizing the elusive perovskite “black phase”—photoactive cubic α-FAPI—as the relatively bulky FA + cations tend to favor the thermodynamically stable nonphotoactive “yellow phase”. Here, in this study, we present a templated growth strategy employing thiol-functionalized MoS 2 nanosheets as templates. By introduction of 3-mercaptopropionic acid (MPA)-functionalized MoS 2 as a growth template, precise control over crystal formation was achieved, favoring the growth of high-quality α-FAPI films. These advanced templated films exhibited substantial improvements in charge transport properties, efficient light absorption, and enhanced charge extraction. As a result, the PSCs achieved a significantly enhanced power conversion efficiency (PCE) compared to the nontemplated control device, increasing from 20.6 to 22.5%. The MoS 2 -incorporated device also demonstrated excellent shelf stability, maintaining 91% of the initial PCE even after 1600 h of storage without device encapsulation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Atomic-Scale Dynamic Mechanisms of Embedded MoS 2 Wires

Nanowires composed of a 1:1 stoichiometry of transition metals and chalcogen ions can be fabricated from two-dimensional transition metal dichalcogenides (TMDs) by using electron beam irradiation. Wires fabricated through in situ experiments can be geometrically connected to TMD sheets in various ways, and their physical properties can vary accordingly. Understanding the structural transformation caused by electron beams is critical for designing wire-sheet structures for nanoelectronics. In this study, we report the behavior of nanowires formed inside a monolayer MoS 2 sheet by combining phase-contrast images and large-scale atomistic modeling. Here we investigate the effect of vacancies on the dynamic evolution of wires, such as rotations with different edge structures and breaking, by considering the interactions between MoS wires and MoS 2 nanosheets. The obtained insights can be applied to other monolayer TMDs to guide the behavior of TMD wires and fabricate favorable geometries for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Origin of Large Effective Phonon Magnetic Moments in Monolayer MoS 2

Recent helicity-resolved magneto-Raman spectroscopy measurement demonstrates large effective phonon magnetic moments of ~2.5 μ B in monolayer MoS 2 , highlighting resonant excitation of bright excitons as a feasible route to activate Γ-point circularly polarized phonons in transition metal dichalcogenides. However, a microscopic picture of this intriguing phenomenon remains lacking. In this work, we show that an orbital transition between the split conduction bands (Δ 0 = 4 meV) of MoS 2 couples to the doubly degenerate E" phonon mode (Ω 0 = 33 meV), forming two hybridized states. Our phononic and electronic Raman scattering measurements capture these two states: (i) one with predominantly phonon contribution in the helicity-switched channels and (ii) one with primarily orbital contribution in the helicity-conserved channels. An orbital-phonon coupling model successfully reproduces the large effective magnetic moments of the circularly polarized phonons and explains their thermodynamic properties. Strikingly, the Raman mode from the orbital transition is superimposed on a strong quasi-elastic scattering background, indicating the presence of spin fluctuations. As a result, the electrons excited to the conduction bands through the exciton exhibit paramagnetic behavior although MoS 2 is generally considered as a nonmagnetic material. By depositing nanometer-thickness nickel thin films on monolayer MoS 2 , we tune the electronic structure so that the A exciton perfectly overlaps with the 633 nm laser. The optimization of resonance excitation leads to pronounced tunability of the orbital-phonon hybridized states. Our results generalize the orbital-phonon coupling model of effective phonon magnetic moments to material systems beyond the paramagnets and magnets.

2D transition metal dichalcogenide↗
DOE OSTI2025

Construction of MoS 2 /MoO 3 Heterostructure with Ultrafast-Charged and Superior Low-Temperature Sodium Storage Properties

The electrochemical reaction kinetics of sodium-ion batteries (SIBs) become sluggish at low temperatures, resulting in significant reductions in energy density and power density. Rational design of anode materials with excellent low-temperature performance is of great significance for promoting the application of SIBs under extreme conditions. Here, in this study, the spontaneous hydrolysis and oxidation reactions of MoS 2 in aqueous solution are used to successfully construct the MoS 2 /MoO 3 heterostructure. The formation of built-in electric fields at the MoS 2 /MoO 3 heterointerfaces improves the electrochemical reaction kinetics, thereby enhancing the rate performance. In addition, the dual-phase material can effectively buffer the volume strain during the cycle process, thereby improving the cycle stability. Thus, the MoS 2 /MoO 3 displays ultrafast charging properties at room temperature (up to 244.6 mAh g –1 at 40 A g –1 , discharge/charge in 22 s). Even at −40 °C, it also exhibits a high capacity of 303.7 mAh g –1 and superior cycling performance (capacity retention rate up to 92.9% after 900 cycles at 2 A g –1 ).

MoS2↗
DOE OSTI2026

Substrate-Directed Underlayer Growth of Bilayer MoS 2 Revealed by Mo Isotope Labeling

Direct control over the vertical formation sequence and stacking registry in van der Waals (vdW) bilayers is essential for device performance and moiré engineering yet difficult to resolve unambiguously with conventional probes. Here, we use Mo isotope labeling in a two-step chemical vapor deposition process to synthesize bilayer MoS 2 and trace its vertical formation on common substrates. By combining site-selective laser thinning, Raman spectroscopy, time-of-flight secondary ion mass spectrometry, and atomic-resolution scanning transimission electron microscopy (STEM), we find a clear substrate dependence: on SiO 2 /Si, the second layer nucleates and grows beneath the first (underlayer), whereas on sapphire, it forms on top (overlayer). Density functional theory indicates that a larger equilibrium interfacial separation and weaker MoS 2 –substrate interactions on amorphous SiO 2 permit confined interfacial diffusion and underlayer nucleation, whereas stronger interactions and smaller separations on sapphire favor overlayer growth. On SiO 2 , confined epitaxy templates commensurate 2H, 3R, and mixed bilayers, as confirmed by second harmonic generation spectroscopy and STEM. During underlayer coalescence, embedded mirror-twin grain boundaries stitch atomically sharp 2H|3R junctions via alternating 4|8 ring motifs. Molecular-dynamics simulations reveal that these alternating 4|8 motifs accommodate interlayer vdW coupling and locally modulate the stacking registry. These results provide mechanistic insight into confined epitaxial growth and establish isotope labeling as a powerful probe of two-dimensional materials synthesis.

MoS2↗
DOE OSTI2025

Tailoring MoS 2 for Small-Molecule Electroreduction: The Role of Metal Doping and Heterostructures

The electrification of chemical transformations central to sustainable fuel production and waste valorization, such as overall water splitting (OWS), hydrogen evolution reaction (HER), and electrochemical reduction of CO 2 (CO 2 R), presents a powerful opportunity to advance carbon-neutral energy technologies. Transition metal dichalcogenides (TMDs), particularly MoS 2 , have emerged as promising electrocatalyst candidates, owing to their abundance, tunable active sites, and defect-rich structures. This review highlights recent progress in leveraging metal doping and heterostructure engineering of MoS 2 to enhance the electrocatalytic activity and selectivity. By compiling insights from experimental studies and density functional theory (DFT) predictions, we examine how defect creation, electronic structure modification, and interface design contribute to improved charge transport and catalytic efficiency. Particular emphasis is placed on rational design principles, synthetic strategies, and operando characterization methods that provide a pathway to understanding and optimizing MoS 2 -based materials. We also discuss the challenges of stability, mechanistic ambiguity, and scaling while outlining opportunities to bridge theory and experiment. Collectively, this review underscores how defect and heterostructure engineering of MoS 2 can accelerate the development of efficient, sustainable electrocatalysts for both fuel generation and waste-to-value generation.

CO2 reduction↗
DOE OSTI2024

Surface dependence of electronic growth of Cu(111) on MoS 2

Scanning tunneling microscopy shows that copper deposited at room temperature onto a freshly exfoliated MoS 2 surface forms Cu(111) clusters with periodic preferred heights of 5, 8, and 11 atomic layers. These height intervals correlate with Fermi nesting regions along the necks of the bulk Cu Fermi surface, indicating a connection between physical and electronic structures. Density functional theory calculations of freestanding Cu(111) films support this as well, predicting a lower density of states at the Fermi level for these preferred heights. This is consistent with other noble metals deposited on MoS 2 that exhibit electronic growth, in which the metal films self-assemble as nanostructures minimizing quantum electronic energies. Here, we have discovered that it is critical for the metal deposition to begin on a clean MoS 2 surface. If copper is deposited onto an already Cu coated surface, even if the original film displays electronic growth, the resulting Cu film lacks quantization. Instead, the preferred heights of the Cu clusters simply increase linearly with the amount of Cu deposited upon the surface. We believe this is due to different bonding conditions during the initial stages of growth. Newly deposited copper would bond strongly to the already present copper clusters, rather than the weak bonding, which exists to the van der Waals terminated surface of MoS 2 . The stronger bonding with previously deposited clusters hinders additional Cu atoms from reaching their lowest quantum energy state. The interface characteristics of the van der Waals surface enable surface engineering of self-assembled structures to achieve different applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗