Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Microwave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

From Waste to Clean Fuel: Using Microwave Chemistry to Achieve Process Decarbonization

Microwave co-gasification of plastics and biomass has several advantages over conventional gasification, including enhanced hydrogen production and greater solid-to-gas conversion, as opposed to undesirable char and tar -- via process electrification route. A previous study at NETL has revealed the efficient role of microwave heating, which can liberate the oxygenated free radicals and encourage bond cleavage in non-microwave active plastics, if combined with microwave-active corn stover. However, further reduction of the unwanted tar must be achieved for future process scale-up and higher energy efficiency, which can be realized via a microwave-assisted catalytic approach. This continuous study investigates a series of microwave-active Fe catalysts that can efficiently enhance H2 production and reduce tar for plastic-corn stover co-gasification. The results suggest that in presence of magnetite, hydrogen yield increase 100% as compared to non-catalytic system at similar reaction conditions.

Abedin, Ashraf↗
DOE OSTI2024

Microwave-Assisted Gasification of Biochar: Effect of Operational Parameters and Biochar Composition on Syngas Production

The utilization of microwave-assisted gasification for biomass/plastic is a promising route toward clean energy production, contributing to a reduction in carbon footprint. This method facilitates the conversion of biomass into syngas with enhanced hydrogen (H2) yield, surpassing conventional heating approaches. However, the gasification of biochar, a byproduct resulting from the initial rapid pyrolysis of biomass, appears as a rate-determining step in biomass gasification. To ensure high conversion efficiency, particularly in pilot or larger scales, the maintenance of high biochar reactivity is essential, which can be achieved by introducing catalysts to minimize biochar formation. Furthermore, given the susceptibility of biochar to microwave heating, gaining a comprehensive understanding of its behavior in the presence of microwave-active catalysts under microwave conditions is crucial to obtain valuable insights into the underlying mechanisms, thereby improving overall biomass gasification efficiency. In the previous study, magnetite (Fe3O4) was selected for microwave-assisted gasification for biomass/plastic due to its dual role as a catalyst and microwave absorber and demonstrated considerably enhanced hydrogen production. Herein, Fe3O4 is rationally modified with metal promoters and their synergistic effect toward biochar gasification performance is investigated. The data shows that metal promoted Fe3O4 shows a higher syngas yield than that of pristine Fe3O4 in biochar.

Mai, Duy Hien↗
DOE OSTI2024

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. Here, this study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in OpenFOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

42 ENGINEERING↗
DOE OSTI2023

Explicitly determined sea ice emissivity and emission temperature over the Arctic for surface–sensitive microwave channels

Data assimilation of satellite microwave measurements is one of the important keys to improving weather forecasting over the Arctic region. However, the use of surface-sensitive microwave-sounding channel measurements for data assimilation or retrieval has been limited, especially during winter, due to the poorly constrained sea ice emissivity. In this study, aiming at more use of those channel measurements in the data assimilation, we propose an explicit method for specifying the surface radiative boundary conditions (namely emissivity and emitting layer temperature of snow and ice). These were explicitly determined with a radiative transfer model for snow and ice and with snow/ice physical parameters (i.e., snow/ice depths and vertical distributions of temperature, density, salinity, and grain size) simulated from the thermodynamically-driven snow/ice growth model. Here we conducted 1-D Var experiments in order to examine whether this approach can help to use the surface-sensitive microwave temperature channel measurements over the Arctic sea ice region for data assimilation. Results show that (1) the surface-sensitive microwave channels can be used in the 1-D Var retrieval, and (2) the specification of the radiative boundary condition at the surface using the snow/sea ice emission model can significantly improve the atmospheric temperature retrieval, especially in the lower troposphere (500 hPa to surface). The successful retrieval suggests that useful information can be extracted from surface-sensitive microwave-sounding channel radiances over sea ice surfaces through the explicit determination of snow/ice emissivity and emitting layer temperature.

1-D Var retrieval↗
DOE OSTI2023

Microwave resonance enhanced CO 2 reduction using biochar

The conventional process for CO 2 conversion requires high energy and expensive catalysts, and shows poor product selectivity. Here, in this study, we address these challenges by investigating an environmentally friendly method for CO production through the variable frequency microwave-driven CO 2 Boudouard reaction over biochar. We hypothesized that tuning the microwave frequency to align with the dielectric properties of biochar, and thereby induce a resonance effect, could significantly enhance reaction efficiency. Experiments were conducted to explore the effect of microwave frequency on CO 2 conversion efficiency in the variable frequency microwave reactor operating within a frequency range of 2430–6000 MHz. Results reveal a significant resonance effect at 4225 MHz resulting in an outstanding CO 2 conversion of 96.3%, in sharp contrast to the complete absence of conversion observed at the conventional 2450 MHz. The resonance frequency not only facilitated exceptional conversion but also remarkably improved energy efficiency, yielding a productivity of 1427.5 µmol/kJ of CO. This represents a remarkable 474-fold increase compared to electrical heating. Furthermore, continuous microwave irradiation at this optimized frequency demonstrated remarkable stability and induced substantial enhancements in the pore structure and surface area of biochar. This innovative approach provides promising insights into sustainable and efficient CO production processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Microwave synthesis of single-phase nanoparticles made of multi-principal element alloys

In this work, metal nanoparticles of multi-principal element alloys (MPEA) with a single crystalline phase have been synthesized by flash heating/cooling of nanosized metals encapsulated in micelle vesicles dispersed in an oil phase (e.g., cyclohexane). Flash heating is realized by selective absorption of a microwave pulse in metals to rapidly heat metals into uniform melts. The oil phase barely absorbs microwave and maintains the low temperature, which can rapidly quench the high-temperature metal melts to enable the flash cooling process. The precursor ions of four metals, including Au, Pt, Pd, and Cu, can be simultaneously reduced by hydrazine in the aqueous solution encapsulated in the micelle vesicles. The resulting metals efficiently absorb microwave energy to locally reach a temperature high enough to melt themselves into a uniform mixture. The duration of microwave pulse is crucial to ensure the reduced metals mix uniformly, while the temperature of oil phase is still low to rapidly quench the metals and freeze the single-phase crystalline lattices in alloy nanoparticles. The microwave-enabled flash heating/cooling provides a new method to synthesize single-phase MPEA nanoparticles of many metal combinations when the appropriate water-in-oil micelle systems and the appropriate reduction reactions of metal precursors are available.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Microwave catalytic conversion of acetylene for co-production of hydrogen and carbon nanotubes

Natural gas conversion to hydrogen and solid carbon can drastically reduce the carbon footprint. Microwave plasma pyrolysis is an emerging process for chemical industries to directly convert methane (CH 4 ), the major component of natural gas, to hydrogen and carbon, which offers benefits such as fast process dynamics, flexibility, and high product yield. However, the formation of unwanted by-products, like acetylene (C 2 H 2 ), will require extra cost for gas separation. Plasma pyrolysis of CH 4 produces large amount of acetylene at downstream, which is currently used mainly for welding. Here, to avoid gas separation and upgrade acetylene from the downstream of methane plasma reactor, a novel approach toward its transformation to carbon nanotubes (CNT) and pure hydrogen (H 2 ) over Ni-based bimetallic catalyst driven by microwave irradiation has been reported in this work. The dominant gas product was hydrogen. Low concentrations of methane, ethane, and ethylene were observed in the product stream. Catalytic acetylene decomposition was carried out at 400 °C over Al 2 O 3 supported Ni catalyst. The results showed that, at 400 °C, acetylene was dehydrogenated to CNT and hydrogen was the dominant gas in product stream over 10Ni-1Pd-Al 2 O 3 catalyst. Characterizations of spent catalysts was conducted using Raman spectroscopy and transmission electron microscopy (TEM) to investigate the properties of carbon deposited over the catalyst during the catalytic acetylene decomposition. The results highlight that methane can be efficiently converted to hydrogen and CNT through 2-step process, microwave plasma and microwave catalytic conversion of intermediate acetylene, operated in a single reactor system driven by microwave.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Microwave-assisted co-gasification of mixed plastics and corn stover: A synergistic approach to produce clean hydrogen

Co-gasification of waste plastic and corn stover into hydrogen is an effective way of reducing hydrogen cost and carbon footprint. However, current gasification technologies are energy intensive and cannot accommodate flexible feedstock. Microwave gasification offers several advantages including higher H 2 yield and enhanced selectivity to syngas over tars. Herein this work presents parametric optimization study of microwave co-gasification of mixed plastics and corn stover for hydrogen-rich syngas. High hydrogen yields of 30.5 mmol H2 /g feed at 700 °C were obtained using a microwave reactor, as opposed to 0.9 mmolH 2 /g feed at 700-950 °C with conventional heating. Hydrogen yields are >98% of the theoretical extractable hydrogen from feedstock. Microwaves enhanced plastic and corn stover synergy and reduced tar yields. H-poor carbon formation resulting from the dehydrogenation of tar and coke, and light olefins decomposition, triggered by the external microwave electric fields, allowed further cracking of intermediate hydrocarbons to produce additional H 2 .

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Surface exsolving perovskite ceramics as catalyst for microwave methane pyrolysis to co-generate hydrogen and carbon nanotube

In this study, we have successfully developed a novel surface exsolving perovskite ceramic, which demonstrates the ability to simultaneously generate CO x -free hydrogen and carbon nanotubes (CNTs) through methane pyrolysis under the influence of microwave irradiation. We conducted an extensive survey and optimization of various perovskite materials specifically tailored for microwave applications. Among the materials investigated, nickel-doped strontium titanium oxide (STON) emerged as the most promising candidate, exhibiting both a satisfactory methane conversion rate and excellent responsiveness to microwave irradiation. Refinement of STON was carried out by fine-tuning the Ni content, optimizing the reduction dwell time, and adjusting the reduction temperature. Notably, SrTiNi 0.08 O 3 (STON8), demonstrated an impressive initial methane conversion rate of up to 40%. Transmission Electron Microscopy (TEM) provided visual evidence of the correlation between Ni content and reduction temperature, with respect to the exsolved Ni metal particle size. This finding highlights the immense potential of surface exsolving perovskite ceramics as a highly effective catalyst for the simultaneous production of CNTs and COx-free hydrogen via methane pyrolysis under microwave irradiation. Furthermore, it represents a step forward in the field of catalytic materials and microwave-driven processes.

08 HYDROGEN↗
DOE OSTI2025

Microwave-assisted pyrolysis of liquid hydrocarbons using iron-based alumina catalysts obtained by solution combustion synthesis: The effect of synthesis parameters

The microwave-absorbing and catalytic properties of iron-based alumina (FeAl x O y ) materials have enabled their use as catalysts for the microwave-assisted generation of hydrogen and carbon via pyrolysis of hydrocarbons. Solution combustion synthesis (SCS) is a promising method to fabricate these materials, but the pyrolysis performance still needs to be improved. The present work investigated how altering the SCS parameters affects the pyrolysis of diesel fuel, gasoline, and crude oil. Two fuels (citric acid and glycine), four Fe:Al molar ratios, and two heating modes (hotplate and furnace) were tested. Fe/γ-Al 2 O 3 and Fe/β-SiC catalysts were prepared via incipient wetness impregnation for comparison. Among the three fossil fuels tested, diesel fuel yielded the highest amounts of H 2 and least amounts of CO x . The choice of fuel for the SCS process and the Fe/Al ratio strongly affected pyrolysis performance as they influence properties important for both catalysis and microwave absorption. The use of glycine resulted in catalysts that exhibited high H 2 yield and low CO 2 generation, which is explained by the revealed structural differences. The increase in the Fe:Al molar ratio accelerated microwave heating by adding more magnetic loss but also increased the amount of CO x . When the optimal SCS parameters were used, FeAl x O y catalysts outperformed Fe/γ-Al 2 O 3 and Fe/β-SiC. The high H 2 generation efficiency of the SCS catalysts is explained by their enhanced microwave-absorption properties. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed the formation of large-diameter CNTs via the tip-growth mechanism. The regeneration of SCS catalysts was demonstrated via the Boudouard reaction.

Carbon nanotubes↗
DOE OSTI2023

Multicolored microwave absorbers with dynamic frequency modulation

Microwave-absorbing materials are extensively used in intelligent electronic devices and stealth technologies where the ability to dynamically adjust microwave-absorbing capacity in response to specific requirements is vitally important. Herein, we report a new approach for constructing dynamically tunable microwave absorbers with ultrawide tunable frequency ranges that are simultaneously endowed with vibrant structural colors. Here, the methodology produces structural colors and adjusts absorption properties by constructing ZnO coatings with precisely adjustable thicknesses on a polypyrrole/melamine foam (PPy/MF) surface by atomic layer deposition (ALD) in conjunction with a pressure-driven strategy that regulates the compression ratio. The electrical conductivity, electromagnetic parameters, thickness, and pore size of the ZnO-coated PPy/MF (ZnO/PPy/MF) are effectively adjusted, and simply applying external pressure widens the tunable frequency range and the effective absorption bandwidth. As a result, the effective absorption frequency of ZnO/PPy/MF is dynamically adjustable from the S band to the Ku band, thereby covering 94.3% of the entire microwave spectrum. Moreover, the brilliant and uniform structural colors of ZnO/PPy/MF, which span various color categories, are precisely regulated by tuning the thickness of the ZnO coating by adjusting the number of ALD cycles. ZnO/PPy/MF is strongly hydrophobic, which endows it with remarkable self-cleaning properties. Therefore, ZnO/PPy/MF provides a conceptually novel platform for the development of next-generation smart microwave-absorbing materials due to its integrated dynamic frequency-regulating ability, brilliant structural coloration, and self-cleaning features.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Material Plasma Exposure eXperiment (MPEX) High Heat Flux Bellows for Component Alignment in High Microwave Environment

The Material Plasma Exposure eXperiment (MPEX) device is a linear plasma device developed to perform plasma material interaction experiments under the conditions prototypic of a fusion reactor divertor. MPEX has multiple systems that must be precisely aligned to the plasma axis, including an electron cyclotron heating system that emits up to 400 kW of microwave power into the vacuum vessel. Five distinct systems require precise alignment on the MPEX device, thus requiring four bellows, all of which are adjacent to the plasma at a relatively high heat flux of approximately 47 kW/m2 and microwave power regions. The MPEX high heat flux bellows (HHFB) is designed to deliver 6 degrees of freedom positioning. The HHFB includes titanium–zirconium–molybdenum (TZM) inserts that are brazed into a Glidcop AL-15 body using a high-temperature braze alloy, thus blocking direct line of sight to an edge-welded bellows from the plasma and microwave screen to block microwaves from the bellows. Further, a custom ConFlat knife edge is machined into the Glidcop AL-15, so the vacuum flanges do not need a braze or weld joint on the vacuum interface. Fingerstock or copper mesh is used to restrict microwave power from entering the interstitial space between the water-cooled Glidcop AL-15 body and edge-welded bellows. Glidcop AL-15 was selected as the material of choice for the water-cooled body because it can maintain mechanical integrity at elevated temperatures, and it also allows for a high-temperature braze. TZM was selected for its machinability and compatibility with vacuum and plasma requirements. A test article is also being considered for a similarly shaped component, the MPEX limiter, that will demonstrate the integrity of the braze joint under high thermal load. Results from this testing will be extrapolated to deduce the lifetime and integrity of the HHFB design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Exploring Catalyst Compositions for Microwave-Assisted Methane Dehydroaromatization

The flaring of natural gas in U.S. shale regions remains a challenge for producers. One alternative to flaring is converting the wasted gas into valuable chemicals. Microwave-based processes offer a promising solution, potentially enabling the development of compact, modular systems for on-site production of chemicals, such as aromatics, from natural gas. This is due to the advantages of microwave heating, including efficient heating of compact volumes, accelerated reaction rates, and electrification of heating. However, developing effective catalysts for microwave-based processes is challenging, as conventional materials often require modification to be effectively heated by microwaves. This study provides an overview of a catalyst development project focused on a molybdenum-supported zeolite catalyst, optimized for the direct conversion of methane into aromatics under microwave irradiation. It details the synthesis, characterization, and the effects of promoters, as well as computational efforts undertaken to understand and enhance the catalyst's performance.

flare gas↗
DOE OSTI2021

Distributed Acoustic Sensing Based on Coherent Microwave Photonics Interferometry

A microwave photonics method has been developed for measuring distributed acoustic signals. This method uses microwave-modulated low coherence light as a probe to interrogate distributed in-fiber interferometers, which are used to measure acoustic-induced strain. By sweeping the microwave frequency at a constant rate, the acoustic signals are encoded into the complex microwave spectrum. The microwave spectrum is transformed into the joint time–frequency domain and further processed to obtain the distributed acoustic signals. The method is first evaluated using an intrinsic Fabry Perot interferometer (IFPI). Acoustic signals of frequency up to 15.6 kHz were detected. The method was further demonstrated using an array of in-fiber weak reflectors and an external Michelson interferometer. Two piezoceramic cylinders (PCCs) driven at frequencies of 1700 Hz and 3430 Hz were used as acoustic sources. The experiment results show that the sensing system can locate multiple acoustic sources. The system resolves 20 nε when the spatial resolution is 5 cm. The recovered acoustic signals match the excitation signals in frequency, amplitude, and phase, indicating an excellent potential for distributed acoustic sensing (DAS).

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Multiscale modeling of packed-bed microwave reactors and estimation of intrinsic materials' permittivity

Modeling of packed-bed microwave reactors relies on an accurate representation of particle size, shape, and distribution within the bed, as well as the particles' dielectric properties. The measured permittivity of microwave susceptors (powders or structured materials) depends on the geometric features of the particles and the porosity of the bed, as well as the specific form factor of a structured material. These are effective properties and cannot be used to analyze other reactor configurations unless the geometric effects are removed. Therefore, we introduce a methodology for extracting the intrinsic particle permittivity from experimentally measured effective permittivity by combining cavity-based measurements with multiscale simulations and machine learning. Further, we develop the first multiscale model of packed-bed microwave reactors that incorporate particle effects (geometric features, random packing, and particle contact). This approach bridges macroscopic observables with mesoscopic physics, enabling analysis of local hotspots, arcing, and contact effects that control reactor performance. Using polymer-based spherical activated carbon (PBSAC) and silicon carbide (SiC) as examples, we demonstrate that the inferred particle permittivity is consistent with independent experimental heating profiles we collect from microwave reactors without adjustable parameters. Finally, this methodology establishes a foundation for predictive, multiscale design of microwave packed-bed reactors that explicitly accounts for particle-scale effects, enabling the estimation of intrinsic permittivity for the first time.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

High-efficiency microwave-optical quantum transduction based on a cavity electro-optic superconducting system with long coherence time

Abstract Frequency conversion between microwave and optical photons is a key enabling technology to create links between superconducting quantum processors and to realize distributed quantum networks. We propose a microwave-optical transduction platform based on long-coherence time superconducting radio-frequency (SRF) cavities coupled to electro-optic optical cavities to mitigate the loss mechanisms that limit the attainment of high conversion efficiency. We optimize the microwave-optical field overlap and optical coupling losses in the design while achieving long microwave and optical photon lifetime at milli-Kelvin temperatures. This represents a significant enhancement of the transduction efficiency up to 50% under incoming pump power of 140 μW, which allows the conversion of few-photon quantum signals. Furthermore, this scheme exhibits high resolution for optically reading out the dispersive shift induced by a superconducting transmon qubit coupled to the SRF cavity. We also show that low microwave losses enhance the fidelity of heralded entanglement generation between two remote quantum systems. Finally, high precision in quantum sensing can be reached below the standard quantum limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. This study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in Open-FOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS simulation includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

Ge, Wenjun↗
DOE OSTI2023

Modeling the Effects of Microwave Heating on Densification in Chemical Vapor Infiltration

Microwave heating has great potential to accelerate the synthesis of ceramic matrix composites (CMCs) by a process called Chemical Vapor Infiltration (CVI). In CVI, reactive gases ingress a porous preform and undergo chemical transformation to deposit solid ceramic phase within the pores at high temperature thus, densifying the preform. However, the competing effects of chemical kinetics and gas transport are known to result in non-uniform densification as the outer surfaces of the preform experience faster depositions compared to the core. Achieving spatial temperature control plays a key role improving the densification quality. Microwave heating can potentially create temperature inversion such that the core of the preform is hotter than the outer surface and subsequently, lead to improved densification while keeping the manufacturing times and costs low. In the present work, a computational modeling strategy has been developed that accounts for the key physical phenomena responsible for densification of porous preforms using microwave heating. Specifically, a chemical kinetics model has been formulated for Silicon Carbide (SiC) deposition from MTS/H2 precursor. The model is implemented in a pore-resolved reactive transport solver, Quilt. The CVI simulations are performed for several conditions. Initially, parameterized temperature control is imposed to identify optimum conditions for good densification quality at a fraction of processing time. Further, simulations of microwave heating of porous SiC preforms are performed using OpenFOAM. A strategy to achieve and enhance temperature inversion is identified. The resulting temperature profiles are used in the pore-resolved densification simulations to analyze the densification behavior. It is observed that the temperature inversion achieved by microwave heating leads to significant improvements in densification quality and at the same time, keeps the manufacturing time low.

36 MATERIALS SCIENCE↗