Electrostatic acceleration system for hypervelocity microparticles with selected kinematic properties
Electrostatic acceleration system for hypervelocity microparticles with selected kinematic properties
Lewis, A. R.↗
SEARCH · Engineering Papers
Results for “Microparticles”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Filamentary crystal growth associated with hypervelocity microparticle impact craters
Filamentary crystal growth associated with hypervelocity microparticle impacts on copper foil
Berg, O. E.↗
Microparticle collection experiments during the 1966 Orionid and Leonid meteor showers
Microparticle collection experiments during 1966 Orionid and Leonid meteor showers accomplished by Luster and ALARR /air launched-air recovered rocket/ instruments
Blanchard, M. B.↗
Filamentary crystal growth associated with impact craters from hypervelocity microparticles
Filamentary crystal growth associated with hypervelocity microparticles impact upon Cu foil
Berg, O. E.↗
Thin film penetration by hypervelocity microparticles
Thin film penetration by hypervelocity microparticles of carbonyl iron
Lewis, A. R.↗
Selective condensation of aminoacyl adenylates by nucleoproteinoid microparticles.
Microparticles composed of each of four enzymically synthesized homopolynucleotides and the same lysine-rich proteinoid have been found to influence the condensation of the AMP-anhydrides of each of four amino acids. The conditions of preparation of the particles and other variables of the experiments control the types of reaction. When a period set of conditions was identified empirically, the incorporation favored the amino acids whose present-day codons are related to the homopolynucleotide in the particle.
Nakashima, T.↗
A technique for position sensing and improved momentum evaluation of microparticle impacts in space.
The design of a three element piezoelectric microparticle impact sensing diaphragm is described which is sensitive to the detection of momentum propagated by the bending wave. The design achieves a sensitivity of .03 microdyn/sec and optimizes the detection of the direct-path pulse from impact relative to secondary reflections and interference from discontinuities. Measurement of the relative arrival times and the maximum amplitudes of the outputs from the three piezoelectric sensors leads to the determination of the impact position and the normally resolved impact momentum exchange. Coincidence of the signals and a partial redundancy of data leads to a very high noise discrimination.
Mcdonnell, J. A. M.↗
A possible mechanism for the capture of microparticles by the earth and other planets of the solar system
By application of Lyttleton's theory for the formation of comets, it is shown that a possible mechanism for the origin and formation of a concentration of cosmic particles around the earth and the other planets of the solar system exists. In the vicinity of the neutral point, where the velocity of colliding particles is not greater than 6 km/s, it is found that if the solid particles after collision must remain in a solid state, there can be no possibility of accretion for Mercury, Mars, and the Moon, where the maximum value of the distance of the center of the planet to the asymptotic trajectory is less than the radius of the planet. On the other hand, the capture radii of microparticles in solid form varies from a minimum of 2.95 planetary radii for Venus and 3.47 for the Earth, to about 986 for Jupiter.
Dibenedetto, F.↗
Microparticle accelerator of unique design
A microparticle accelerator has been devised for micrometeoroid impact and cratering simulation; the device produces high-velocity (0.5-15 km/sec), micrometer-sized projectiles of any cohesive material. In the source, an electrodynamic levitator, single particles are charged by ion bombardment in high vacuum. The vertical accelerator has four drift tubes, each initially at a high negative voltage. After injection of the projectile, each tube is grounded in turn at a time determined by the voltage and charge/mass ratio to give four acceleration stages with a total voltage equivalent to about 1.7 MV.
Vedder, J. F.↗
Selective formation of microparticles by homopolyribonucleotides and proteinoids rich in individual amino acis
The formation of phase-separated microparticles following the mixing of solutions of homopolyribonucleotides with solutions of several basic thermal proteinoids, each rich in an individual amino acid, has been studied. Three of the 4 proteinoids studied yielded results consistent with a matrix of anticodonicity; the fourth did not. The meaning of these results, and others, relative to a postulated matrix for the genetic coding mechanism is discussed.
Lacey, J. C., Jr.↗
Formation of peptides from amino acids by single or multiple additions of ATP to suspensions of nucleoproteinoid microparticles
The synthesis of peptides from individual amino acids or pairs of amino acids and ATP in the presence of catalysis by nucleoproteinoid microparticles is investigated. Experiments were performed with suspensions formed from the condensation of lysine-rich and acidic proteinoids with polyadenylic acid, to which were added glycine, phenylalanine, proline, lysine or glycine-phenylalanine mixtures, and ATP either at once or serially. Peptide yields are found to be greatest for equal amounts of acidic and basic proteinoids. The addition of imidazole is found to alter the preference of glycine-phenylalanine mixtures to form mixed heteropeptides rather than homopeptides. A rapid ATP decay in the peptide synthesis reaction is observed, and a greater yield is obtained for repeated small additions than for a single addition of ATP. The experimental system has properties similar to modern cells, and represents an organizational unit ready for the evolution of associated biochemical pathways.
Nakashima, T.↗
Contaminant Interferences with SIMS Analyses of Microparticle Impactor Residues on LDEF Surfaces
Elemental analyses of impactor residues on high purity surface exposed to the low earth orbit (LEO) environment for 5.8 years on Long Duration Exposure Facility (LDEF) has revealed several probable sources for microparticles at this altitude, including natural micrometeorites and manmade debris ranging from paint pigments to bits of stainless steel. A myriad of contamination interferences were identified and their effects on impactor debris identification mitigated during the course of this study. These interferences included pre-, post-, and in-flight deposited particulate surface contaminants, as well as indigenous heterogeneous material contaminants. Non-flight contaminants traced to human origins, including spittle and skin oils, contributed significant levels of alkali-rich carbonaceous interferences. A ubiquitous layer of in-flight deposited silicaceous contamination varied in thickness with location on LDEF and proximity to active electrical fields. In-flight deposited (low velocity) contaminants included urine droplets and bits of metal film from eroded thermal blankets.
Simon, C. G.↗
Phoretic and Radiometric Force Measurements on Microparticles in Microgravity Conditions
Thermophoretic, diffusiophoretic and radiometric forces on microparticles are being measured over a wide range of gas phase and particle conditions using electrodynamic levitation of single particles to simulate microgravity conditions. The thermophoretic force, which arises when a particle exists in a gas having a temperature gradient, is measured by levitating an electrically charged particle between heated and cooled plates mounted in a vacuum chamber. The diffusiophoretic force arising from a concentration gradient in the gas phase is measured in a similar manner except that the heat exchangers are coated with liquids to establish a vapor concentration gradient. These phoretic forces and the radiation pressure force acting on a particle are measured directly in terms of the change in the dc field required to levitate the particle with and without the force applied. The apparatus developed for the research and the experimental techniques are discussed, and results obtained by thermophoresis experiments are presented. The determination of the momentum and energy accommodation coefficients associated with molecular collisions between gases molecules and particles and the measurement of the interaction between electromagnetic radiation and small particles are of particular interest.
Davis, E. James↗
Hypervelocity Microparticle Impact Studies: Simulating Cosmic Dust Impacts on the Dustbuster
Iron and copper microparticles accelerated to 2-20 km/s in a 2 MV Van de Graaff accelerator were used to test a recently-developed cosmic dust mass spectrometer, known as the Dustbuster. Additional information is contained in the original extended abstract.
Austin, D. E.↗
In-SITU Raman Spectroscopy of Single Microparticle Li-Intercalation Electrodes
Modifications in the vibrational properties of a single microparticle of LiMn2O4 induced by extraction and subsequent injection of Li(+) into the lattice have been monitored in situ via simultaneous acquisition of Raman scattering spectra and cyclic voltammetry data in 1M LiC1O4 solutions in ethylene carbonate (EC):diethyl carbonate (DEC) mixtures (1:1 by volume). Statistical analyses of the spectra in the range 15 < SOD < 45%, where SOD represents the state of discharge (in percent) of the nominally fully charged material, i.e. lambda-MnO2, were found to be consistent with the coexistence of two distinct phases of lithiated metal oxide in agreement with information derived from in situ X-ray diffraction (XRD) measurements involving more conventional battery-type electrodes.
Dokko, Kaoru↗
Characterization of Encapsulated Corrosion Inhibitors Containing Microparticles for Environmentally Friendly Smart Coatings
This poster presents the results obtained from experiments designed to evaluate the release properties, as well as the corrosion inhibition effectiveness, of several encapsulated corrosion inhibitors. Microencapsulation has been used in the development of environmentally friendly multifunctional smart coatings. This technique enables the incorporation of autonomous corrosion detection, inhibition and self-healing functionalities into many commercially available coating systems. Select environmentally friendly corrosion inhibitors were encapsulated in organic and inorganic pH-sensitive microparticles and their release in basic solutions was studied. The release rate results showed that the encapsulation can be tailored from fast, for immediate corrosion protection, to slow, which will provide continued long-term corrosion protection. The incorporation of several corrosion inhibitor release profiles into a coating provides effective corrosion protection properties. To investigate the corrosion inhibition efficiency of the encapsulated inhibitors, electrochemical techniques were used to obtain corrosion potential, polarization curve and polarization resistance data. These measurements were performed using the free as well as the encapsulated inhibitors singly or in combinations. Results from these electrochemical tests will be compared to those obtained from weight loss and other accelerated corrosion experiments.
Coatings↗
Reversibly Assembled Microparticles for Sustained Applications on the Moon and Mars
A sustained presence in any extra-terrestrial environment will require the capability to generate materials, goods, and ultimately vehicles, construction supplies and habitats to be tenable. As an example, NASA, in collaboration with Made In Space, Inc., recently reported the results of extensive research toward enabling3D printing in space. The extensive characterization and comparison of 3D printed articles suggested that, overall, articles generated in the International Space Station microgravity environment were comparable to those generated on Earth. The benefit of in-space manufacturing can be increased through utilization of recyclable materials. A recent analysis of a hypothetical 1,100 day round trip mission to Mars determined that significant mass savings and increase in mission probability of success could be achieved through in-space manufacturing with recyclable materials. NASA’s project ESPUR (Enabling Sustained Presence Using Recyclables), through support from NASA Langley’s Innovative Research and Development Fund, is investigating novel, polymer-coated, epoxy microparticle systems as an enabling technology to realize in-space manufacturing using recyclable feedstocks. Building from previously reported results, further progress toward synthesis of the polymer coating containing click chemical functionalities will be described here. Finite elemental analysis (FEA) has been utilized, in light of scale-free/small world considerations in an effort to identify compositions most likely to yield robust macroscopic geometries. Initial results will be described here. Finally, potential mass savings and life cycle of this recyclable materials technology will be discussed.
Click Chemistry↗
Upconversion of Infrared Light by Graphitic Microparticles Due to Photoinduced Structural Modification
Recent reports of upconversion and white light emission from graphitic particles warrant an explanation of the physics behind the process. A model is offered, wherein the upconversion is facilitated by photoinduced electronic structure modification allowing for multiphoton processes. As per the prediction of the model, it is experimentally shown that graphite upconverts infrared light centered around 1.31 μm (0.95 eV) to broadband white light centered around 0.85 μm (1.46 eV). The results suggest that upconversion from shortwave infrared (≈3 μm, 0.45 eV) to visible region may be possible. The experiments show that the population dynamics of the electronic states involved in this upconversion process occur in the timescale of milliseconds.
Sharma, Rohin↗