Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Metal nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Gradient nanostructured steel with superior tensile plasticity

Nanostructured metallic materials with abundant high-angle grain boundaries exhibit high strength and good radiation resistance. While the nanoscale grains induce high strength, they also degrade tensile ductility. We show that a gradient nanostructured ferritic steel exhibits simultaneous improvement in yield strength by 36% and uniform elongation by 50% compared to the homogenously structured counterpart. In situ tension studies coupled with electron backscattered diffraction analyses reveal intricate coordinated deformation mechanisms in the gradient structures. The outermost nanolaminate grains sustain a substantial plastic strain via a profound deformation mechanism involving prominent grain reorientation. This synergistic plastic co-deformation process alters the rupture mode in the post-necking regime, thus delaying the onset of fracture. The present discovery highlights the intrinsic plasticity of nanolaminate grains and their significance in simultaneous improvement of strength and tensile ductility of structural metallic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultrafast hot-hole injection modifies hot-electron dynamics in Au/p-GaN heterostructures

A fundamental understanding of hot-carrier dynamics in photo-excited metal nanostructures is needed to unlock their potential for photodetection and photocatalysis. Despite numerous studies on the ultrafast dynamics of hot electrons, so far, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. Here, we report ultrafast (t < 200 fs) hot-hole injection from Au nanoparticles into the valence band of p-type GaN. The removal of hot holes from below the Au Fermi level is observed to substantially alter the thermalization dynamics of hot electrons, reducing the peak electronic temperature and the electron-phonon coupling time of the Au nanoparticles. First-principles calculations reveal that hot-hole injection modifies the relaxation dynamics of hot electrons in Au nanoparticles by modulating the electronic structure of the metal on timescales commensurate with electron-electron scattering. Overall, these results advance our understanding of hot-hole dynamics in metal-semiconductor heterostructures and offer additional strategies for manipulating the dynamics of hot carriers on ultrafast timescales. Photo-excited gold nanoparticles are shown to provide ultrafast and efficient hot-hole injection to the valence band of p-type GaN, substantially altering hot-electron dynamics in the nanoparticles and forming a basis to design hot-hole-based optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Revealing Progressive Degradation of Cobalt Oxide Nanoparticles During Thermochemical Redox Cycling via Operando STEM-EELS

Metal oxides are promising materials for long-duration thermochemical energy storage. Efforts to characterize their reaction kinetics, conversion rate, and morphological evolution during thermochemical cycling have largely focused on bulk and microscale measurements. However, the design of nanostructured metal oxides could improve the reaction reversibility and kinetics, warranting the development of platforms to investigate how these materials behave at the nanoscale. Here, we demonstrate the use of correlative, time-resolved electron energy loss spectroscopy and imaging in an environmental transmission electron microscope for studying the thermochemical cyclability of cobalt oxide nanoparticles with high spatial and temporal resolution. The spectroscopic data reveal a striking decrease in reaction kinetics after the first cycle, resulting from sintering-driven nanostructural densification. Comparison between cycling in humid and dry air shows that atmospheric conditions can modulate reaction transition temperatures but have limited effects on sintering over multiple cycles, suggesting long-term durability will instead rely on synthetic and/or nanostructural modifications.

25 ENERGY STORAGE↗
DOE OSTI2020

In-situ localized growth of porous metal oxide films on microheater platform for low temperature gas detection

A solid-state, low power microheater sensor platform that is configurable with selected metal oxide films for particular gas sensing applications is described. The sensor platform is configured by selecting a chemiresistive or catalytic material that is suitable for detecting a desired gas and then forming a porous nanostructured film on the designated surfaces of the microheater platform. Also described are methods for creating a highly porous, nanostructured metal oxide film in a controlled location from a liquid precursor using a localized heat source. By fast annealing deposited liquid precursors with the microheater, a highly porous, nanocrystalline metal oxide film can be generated in-situ and locally on the sensor platform.

Maboudian, Roya↗
DOE OSTI2025

Quantification of grain rotation in bulk nanostructured copper via in situ heating white beam synchrotron X-ray diffraction

Grain rotation during microstructural relaxation under heating is conventionally studied extensively through transmission electron microscopy and simulations. However, there is a shortage in examining grain rotations at larger length and volume scales in bulk materials. It is critical to understand the thermal stability of bulk nanostructured metals, since those enhanced mechanical properties have been well recognized. Here, this study aimed to employ a white beam microdiffraction X-ray technique under in situ heating from 300 K to 1073 K at 12 K/min on a nanostructured copper processed by high-pressure torsion, yielding an initial grain size of ∼260 nm before the heating. Evaluation across a wide range of temperatures reveals transition temperatures associated with microstructural relaxation processes. By tracking separate Laue diffraction peaks stemming from individual grains, changes in their orientations can be estimated and quantified. This approach becomes particularly effective when the number of grains within the probed volume is reasonably small. At temperatures above 940 K, about 7.5 % of Cu grains are rotating at speeds of ∼2 × 10 –3 °/s. The radial direction of the disk specimen is found to be the preferred direction of grain rotation, with the rotation axis along the shear direction. Further analysis found no correlation between peak intensity and peak size, related to grain sizes and deviatoric strain, respectively, with rotation conditions or speed. These findings demonstrate that the diffraction technique utilizing white beam X-rays is a complementary and novel characterization tool for understanding microstructural evolution, especially in grain rotations, of bulk crystalline materials.

Grain orientation↗
DOE OSTI2022

Cathode additives for lithium-ion batteries

In some implementations, a cathode is formed by (1) providing a cathode additive including (a) a matrix including a lithium compound, and (b) metal nanostructures embedded in the matrix; and (2) combining the cathode additive with a cathode active material to form a mixture. In other implementations, a cathode is formed by (1) providing a cathode additive including a compound of lithium and at least one non-metal or metalloid; and (2) combining the cathode additive with a cathode active material to form a mixture.

25 ENERGY STORAGE↗
DOE OSTI2023

Quantum simulation of an exotic quantum critical point in a two-site charge Kondo circuit

Tuning a material to the cusp between two distinct ground states can produce physical properties that are unlike those in either of the neighbouring phases. Advances in the fabrication and control of quantum systems have raised the tantalizing prospect of artificial quantum simulators that can capture such behaviour. A tunable array of coupled qubits should have an appropriately rich phase diagram, but realizing such a system with either tunnel-coupled semiconductor quantum dots or metal nanostructures has proven difficult. The challenge for scaling up to clusters or lattices is to ensure that each element behaves essentially identically and that the coupling between elements is uniform, while also maintaining tunability of the interactions. Here we study a nanoelectronic circuit comprising two coupled hybrid metal–semiconductor islands, combining the strengths of both materials to form a potentially scalable platform. The semiconductor component allows for controllable inter-site couplings at quantum point contacts, while the metal component’s effective continuum of states means that different sites can be made equivalent by tuning local potentials. The couplings afforded by this architecture can realize an unusual quantum critical point resulting from frustrated Kondo interactions. In this study, the observed critical behaviour matches theoretical predictions, verifying the success of our experimental quantum simulation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Alternative Rear Contacts for Ultrathin CdSexTe1-x Solar Cells

The back contact is a key component for further developments of CdSeTe solar cells. In this contribution, we investigate several materials and designs that could help the development of highly-reflective, ohmic back contacts for conventional (3.45 um) and thin (800 nm) CdSeTe solar cells. We also explore numerically, nanostructured metal back contacts for light-trapping in ultrathin (200 nm) CdTe solar cells.

back contact↗
DOE OSTI2022

Stability of Polyethylene Glycol-Coated Copper Nanoparticles and Their Optical Properties

Oxidation is a corrosion reaction where the corroded metal forms an oxide. Prevention of oxidation at the nanoscale is critically important to retain the physicochemical properties of metal nanoparticles. In this work, we studied the stability of polyethylene glycol (PEG) coated copper nanoparticles (PEGylated CuNPs) against oxidation. The freshly-prepared PEGylated CuNPs mainly consist of metallic Cu which are quite stable in air although their surfaces are typically covered with a few monolayers of cuprous oxide. However, they are quickly oxidized in water due to the presence of protons that facilitate oxidation of the cuprous oxide to cupric oxide. PEG with carboxylic acid terminus could slightly delay the oxidation process compared to that with thiol terminus. It was found that a solvent with reducing power such as ethanol could greatly enhance the stability of PEGylated CuNPs by preventing further oxidation of the cuprous oxide to cupric oxide and thus retain the optical properties of CuNPs. The reducing environment also assists the galvanic replacement of these PEGylated CuNPs to form hollow nanoshells; however, they consist of ultra-small particle assemblies due to the co-reduction of gold precursor during the replacement reaction. As a result, these nanoshells do not exhibit strong optical properties in the near-infrared region. This study highlights the importance of solvent effects on PEGylated nonprecious metal nanoparticles against oxidation corrosion and its applications in preserving physicochemical properties of metallic nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Ab Initio modeling of Near-Edge EELS spectra for chemisorbed molecules

Abstract Electron energy loss spectroscopy (EELS) has recently been applied to probe chemisorbed molecules on metal nanostructures, but a fundamental understanding of the correlation between these spectra and the electronic structures of the adsorbates has been limited. We report here on the insights afforded by time-dependent density functional theory to decipher the energy loss near edge structure (ELNES) of EELS spectra associated with chemisorption. These first-principles calculations simulate the ELNES-EELS spectra for chemisorbed CO on various facets of Au and Pt. Computational predictions of key signatures such as the ‘red shift’ and reductions in the peak intensity of the 2 π * and 6 σ * peaks, as compared to free CO in the gas phase, are validated in comparison to experimentally collected EELS spectra. These signatures are revealed to arise from changes in the electronic structure in terms of unoccupied density of states associated with the chemisorption process. They are consistent with a Blyholder model that incorporates donation and back-donation of electrons. They are also characteristic of the chemisorption process, such as the choice of metal, site of adsorption and the coverage and distribution of adsorbates. Our simulations thus provide guidelines for the use of ELNES-EELS to characterize the atomic structure and adsorption property of nanostructured surfaces and facilitate the development of advanced nanomaterials for catalytic applications.

Materials Science↗
DOE OSTI2021

Localized Orbital Excitation Drives Bond Formation in Plasmonic Catalysis

Localized surface plasmons generated on metallic nanostructures can be used to accelerate molecular transformations; however, the efficiency is limited by the challenge to control the energy/charge transfer at the interfaces. Here, we combine density functional theory (DFT) calculations and experiments to reveal the mechanism of nitrophenol reduction on Au nanoparticles under visible-light irradiation and propose a strategy to further enhance the reaction rates. DFT calculations show a reduced activation barrier under electronic excitation on Au(111), thus explaining the measured higher rates under visible-light irradiation. Furthermore, we propose a heterostructure with Au nanoparticles covered by a thin film of hexagonal boron nitride; the latter is used to decouple the molecular orbitals from the metal to enable charge localization in the molecule. DFT calculations show that, by this electronic decoupling, the activation barrier can be lowered by a factor of five. Furthermore, this work thus provides a valuable strategy for optimizing catalytic efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced Nanostructure Dynamics on Au(111) with Adsorbed Sulfur due to Au–S Complex Formation

Chemisorbed species can enhance the fluxional dynamics of nanostructured metal surfaces which has implications for applications such as catalysis. Scanning tunneling microscopy studies at room temperature reveal that the presence of adsorbed sulfur (S) greatly enhances the decay rate of 2D Au islands in the vicinity of extended step edges on Au(111). This enhancement is already significant at S coverages, θS, of a few hundredths of a monolayer (ML), and is most pronounced for 0.1–0.3 ML where the decay rate is increased by a factor of around 30. For θ S close to saturation at about 0.6 ML, sulfur induces pitting and reconstruction of the entire surface, and Au islands are stabilized. Enhanced coarsening at lower θS is attributed to the formation and diffusion across terraces of Au–S complexes, particularly AuS 2 and Au4S 4 , with some lesser contribution from Au3S4. This picture is supported by density functional theory analysis of complex formation energies and diffusion barriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Grain boundary softening from stress assisted helium cavity coalescence in ultrafine-grained tungsten

The formation of helium cavities in coarse-grained materials produces hardening proportional to the number density and size of the cavities and due to the interaction of dislocations with intragranular helium defects. In nanostructured metals containing a high density of interfacial sinks, preferential cavity formation in the grain boundaries instead produces softening that is often attributed to enhanced interfacial plasticity. Here, employing two grades of ultrafine-grained tungsten, we explore this effect using targeted implantation studies to map cavity evolution as a function of the irradiation conditions and quantify its impact on the mechanical response through nanoindentation. Softening is reported at implantation temperatures above the threshold for preferential grain boundary cavity formation but at a sufficiently low fluence prior to the growth of intragranular cavities. Collective changes in the mean cavity size, density, and morphology beneath a residual impression on an implanted surface indicate that cavity coalescence accompanied the reduction in hardness. Complementary atomistic simulations demonstrate that, in tungsten grain structures exhibiting softening, grain boundary bubble coalescence is driven by stress concentrations that further act to localize strain in the grain boundaries through cooperative deformation processes involving local atomic shuffling and sliding, dislocation emission, and even the nucleation of unstable twinning events.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Deformation mechanisms in an additively manufactured dual-phase eutectic high-entropy alloy

Nanostructured metals and alloys often exhibit high strengths but at the expense of reduced ductility. Through harnessing the far-from-equilibrium processing conditions of laser powder-bed fusion (L-PBF) additive manufacturing, we develop a dual-phase nanolamellar structure comprised of FCC/L1 2 and BCC/B2 phases in a Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2 eutectic high-entropy alloy (EHEA), which exhibits a combination of ultrahigh yield strength (>1.4 GPa) and large tensile ductility (~17%). The deformation mechanisms of the additively manufactured EHEA are studied via in-situ synchrotron X-ray diffraction and high-resolution transmission electron microscopy. The high yield strength mainly results from effective blockage of dislocation motion by the high density of lamellar interfaces. The refined nanolamellar structures and low stacking fault energy (SFE) promote stacking fault (SF)-mediated deformation in FCC/L1 2 nanolamellae. The accumulation of abundant dislocations and SFs at lamellar interfaces can effectively elevate local stresses to promote dislocation multiplication and martensitic transformation in BCC/B2 nanolamellae. The cooperative deformation of the dual phases, assisted by the semi-coherent lamellar interfaces, gives rise to the large ductility of the as-printed EHEA. In addition, here we also demonstrate that post-printing heat treatment allows us to tune the non-equilibrium microstructures and deformation mechanisms. After annealing, the significantly reduced SFE and thicknesses of the FCC nanolamellae facilitate the formation of massive SFs. The dissolution of nano-precipitates in the BCC/B2 nanolamellae reduces spatial confinement and further promotes martensitic transformation to enhance work hardening. Our work provides fundamental insights into the rich variety of deformation mechanisms underlying the exceptional mechanical properties of the additively manufactured dual-phase nanolamellar EHEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Formation of uranium nitride nanoparticles via mechanical alloying of uranium-molybdenum alloy fuels in gaseous nitrogen

Uranium-molybdenum (U-Mo) alloys show promise as a nuclear fuel system due to their high thermal conductivity and fuel loading capability. However, U-Mo systems are susceptible to irradiation induced swelling ultimately affecting the cladding via mechanical and chemical interactions. To address these shortcomings, this research investigated the formation of uranium mononitride (UN) nanoparticles within a 90 wt% U/10 wt% Mo (U-10Mo) matrix to act as a prospective defect sink for fission products at nanometric hetero-interfaces. To promote the formation of UN, U-10Mo powders were mechanically alloyed under a high purity nitrogen atmosphere. Variations of the milling process investigated included media size, duration of milling, and number of times the milling jar was re-aerated with nitrogen gas. Characterization of the fuel microstructure was completed using light element analysis, X-ray diffraction, scanning and transmission-electron microscopy, electron energy loss spectroscopy, and atom probe tomography. UN nanoparticles measuring 1–5 nm in radius were observed in the U-Mo matrix as early as 1 h into the mechanical alloying process. Milling time in excess of 10 h was found to lead to deleterious effects induced by the stainless-steel milling media.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Nanophotonics for Chemical Imaging and Spectroscopy

The manipulation of light and light-matter interactions on the nanoscale is enabled by the unique optical properties of plasmonic metal nanostructures and nanoparticles. Indeed, engineered hybrid molecular-plasmonic nanostructures have enabled single molecule detection and identification via surface-enhanced Raman scattering (SERS). Further, the same effect is at the core of visualizing single molecules with sub-nanometer spatial resolution via tip-enhanced Raman scattering (TERS). More generally, modern applications of plasmon-enhanced spectroscopy and microscopy fueled advances in fields as diverse as quantum and semiconductor materials, heterogeneous catalysis, and the health sciences, to name a few. All these exciting developments and many more are touched in this virtual special issue (VSI) on nanophotonics. From ultra-precise chemical imaging measurements performed in a scanning tunneling microscope chamber to single molecule spectroscopic measurements performed at solid-air and solid-liquid interfaces, this VSI includes contributions from active practitioners that are all striving to better-understand increasingly complex interfaces encountered in the biological, materials, and chemical sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Density Functional Tight Binding Insights into Plasmonic Silver–Platinum Nanoparticles and Alloys for Enhanced Photocatalysis

Developing accurate and efficient Slater-Koster (SK) tight-binding parameter sets is essential for quantum plasmonic studies of alloyed metal nanoparticles, as conventional time dependent density functional theory (TD-DFT) calculations are computationally prohibitive for larger clusters. In this work, we develop and validate density functional tight binding (DFTB) parameter sets for both ground state (GS-SK) and excited state (ES-SK) calculations to study the structural, electronic, and optical properties of silver (Ag), platinum (Pt), and Ag–Pt nanoalloys. Our investigation of the ground state properties demonstrates that the GS-SK parameters enable DFTB to closely reproduce the electronic structures of platinum clusters with diverse sizes and geometries – showing qualitative agreement with DFT for density of states (DOS) profiles and energy levels. The ES-SK parameters accurately describe excited-state properties compared to TD-DFT reference calculations, including the broad, featureless absorption profiles of Pt that are dominated by interband transitions. Using the ES-SK parameters within a real-time TD-DFTB framework, we compute size-dependent optical absorption spectra of Ag, Pt and Ag-Pt nanocubes containing up to 1099 atoms (size ∼4.18 nm). A detailed study of Ag–Pt and Pt-Ag core–shell nanoparticles shows quenching of the Ag plasmon resonance even at monolayer coverage for Ag-Pt, but not for Pt-Ag. We also show how to define submonolayer Ag-core Pt-shell cubic structures that have similar optical properties to those generated experimentally for much larger particles, which offers potential for describing plasmon-enhanced photocatalysis. Collectively, the GS-SK and ES-SK parameter sets provide an accurate, computationally efficient approach for modeling the complex optical and electronic behavior of noble–transition metal nanostructures and their alloys.

SPR↗
DOE OSTI2020

Heterophase fcc-2H-fcc gold nanorods

The crystal phase-based heterostructures of noble metal nanomaterials are of great research interest for various applications, such as plasmonics and catalysis. However, the synthesis of unusual crystal phases of noble metals still remains a great challenge, making the construction of heterophase noble metal nanostructures difficult. Here, we report a one-pot wet-chemical synthesis of well-defined heterophase fcc-2H-fcc gold nanorods (fcc: face-centred cubic; 2H: hexagonal close-packed with stacking sequence of "AB") at mild conditions. Single particle-level experiments and theoretical investigations reveal that the heterophase gold nanorods demonstrate a distinct optical property compared to that of the conventional fcc gold nanorods. Moreover, the heterophase gold nanorods possess superior electrocatalytic activity for the carbon dioxide reduction reaction over their fcc counterparts under ambient conditions. First-principles calculations suggest that the boosted catalytic performance stems from the energetically favourable adsorption of reaction intermediates, endowed by the unique heterophase characteristic of gold nanorods.

36 MATERIALS SCIENCE↗