Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Metal clusters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

High-resolution CCD spectra of stars in globular clusters. II - Metals and CNO in M71

Palomar coude CCD spectra of resolution 0.3 and 0.6 has been used to redetermine abundances in five stars of the relatively metal rich globular cluster M71. The (Fe/H) value is restricted to the limits of -0.6 to -1.0. The largest source of uncertainty is a systematic difference in f-values between those derived via the Holweger-Muller (1974) solar model and the Bell et al. (1976) solar model. If we use absolute f-values measured by the Oxford group (Blackwell et al. 1982) we find Fe/H to lie in the range of -0.6 to -0.75, i.e., as given by using the Bell et al. solar model. The relative abundances of the light elements, i.e., Na through Ca and probably including Ti show an average excess relative to iron of 0.4-dex. The effect of this difference on metal indices derived from broad- and narrow- band photometry is discussed. For three stars we find O/H = -0.6 using absolute f-values. For CN an analysis of individual rotational lines of the 2-0 band of the red system yields lines in the (C/H, N/H) plane that are consistent with either an original C/Fe = N/Fe = 0 or a modest increase in N relative to C due to CN burning and mixing. A search for C-13N was not successful and an uncertain lower limit of C-12/C-13 near 10 was obtained.

Leep, E. Myckky↗
NASA NTRS2000

Modeling of HiPco Process for Carbon Nanotube Production

High-pressure carbon monoxide (HiPco) reactor, developed at Rice University, is used to produce single-walled carbon nanotubes (SWNT) from gas-phase reactions of iron carbonyl and nickel carbonyl in carbon monoxide at high pressures (10 - 100 atm). Computational modeling is used to better understand the HiPco process. In the present model, decomposition of the precursor, metal cluster formation and growth, and carbon nanotube growth are addressed. Decomposition of precursor molecules is necessary to initiate metal cluster formation. The metal clusters serve as catalysts for carbon nanotube growth. Diameter of metal clusters and number of atoms in these clusters are some of the essential information for predicting carbon nanotube formation and growth, which is then modeled by Boudouard reaction (2CO ---> C(s) + CO2) with metal catalysts. The growth kinetic model is integrated with a two-dimensional axisymmetric reactor flow model to predict reactor performance.

Gokcen, T.↗
NASA NTRS2002

Modeling of the HiPco process for carbon nanotube production. II. Reactor-scale analysis

The high-pressure carbon monoxide (HiPco) process, developed at Rice University, has been reported to produce single-walled carbon nanotubes from gas-phase reactions of iron carbonyl in carbon monoxide at high pressures (10-100 atm). Computational modeling is used here to develop an understanding of the HiPco process. A detailed kinetic model of the HiPco process that includes of the precursor, decomposition metal cluster formation and growth, and carbon nanotube growth was developed in the previous article (Part I). Decomposition of precursor molecules is necessary to initiate metal cluster formation. The metal clusters serve as catalysts for carbon nanotube growth. The diameter of metal clusters and number of atoms in these clusters are some of the essential information for predicting carbon nanotube formation and growth, which is then modeled by the Boudouard reaction with metal catalysts. Based on the detailed model simulations, a reduced kinetic model was also developed in Part I for use in reactor-scale flowfield calculations. Here this reduced kinetic model is integrated with a two-dimensional axisymmetric reactor flow model to predict reactor performance. Carbon nanotube growth is examined with respect to several process variables (peripheral jet temperature, reactor pressure, and Fe(CO)5 concentration) with the use of the axisymmetric model, and the computed results are compared with existing experimental data. The model yields most of the qualitative trends observed in the experiments and helps to understanding the fundamental processes in HiPco carbon nanotube production.

Validation Studies↗
DOE OSTI2026

Discovery of correlated electron molecular orbital materials using graph representations

Correlated electron molecular orbital (CEMO) materials host emergent electronic states built from molecular orbitals localized over clusters of transition metal ions yet have historically been discovered sporadically and generally been treated as isolated case studies. Here we establish CEMO materials as a systematically discoverable class and introduce a graph-based framework to identify, classify, and organize transition-metal cluster motifs in inorganic solids. Starting from crystal structures in the Materials Project, we construct transition metal connectivity graphs, extract cluster motifs using a bond-cutting algorithm, and determine cluster point groups, effective cluster sublattice dimensionality, and translational symmetry. Applying this approach in a high-throughput screen of 34,548 compounds yields 5,306 cluster-containing materials, including 2,627 stable or metastable compounds with isolated clusters and 984 materials featuring mixed-metal clusters. The resulting dataset reveals symmetry and element dependent trends in cluster formation. By integrating cluster classification with flat band lattice topology and battery-relevant information, we provide further relevant information to multiple scientific communities. The accompanying open dataset, Cluster Finder software, and interactive web platform enable systematic exploration of cluster driven electronic phenomena and establish a general pathway for discovering correlated quantum materials and functional materials with cluster-based or extended metal-metal bonding in inorganic solids.

Akhond, Md. Rajbanul [Department of Chemistry, 800↗
NASA NTRS1984

Theoretical research program to study transition metal trimers and embedded clusters

Small transition metal clusters were studied at a high level of approximation, including all the valence electrons in the calculation and extensive electron correlation, in order to understand the electronic structure of these small metal clusters. By comparison of dimers, trimers, and possibly higher clusters, the information obtained was used to provide insights into the electronic structure of bulk transition metals. Small metal clusters are currently of considerable experimental interest and some information is becomming available both from matrix electron spin resonance studies and from gas phase spectroscopy. Collaboration between theorists and experimentalists is thus expected to be especially profitable at this time since there is some experimental information which can serve to guide the theoretical work.

Walch, S. P.↗
DOE OSTI2023

Kinetic and X-ray Absorption Spectroscopic Analysis of Catalytic Redox Cycles over Highly Uniform Polymetal Oxo Clusters

Metal–organic framework materials (MOFs) offer an opportunity for investigating catalytic properties of polymetal oxo clusters that are highly well defined and uniform in nature, in contrast to other classes of catalysts that may exhibit a propensity toward active site heterogeneity. We report herein a kinetic and X-ray absorption spectroscopy (XAS) analysis of the two-electron oxidation of CO over divalent metal sites in MIL-100(M = Fe, Cr) (MIL = Materials of Institut Lavoisier) materials carrying μ 3 -oxo bridged trimers, and connect observations about the kinetic relevance of redox steps to density functional theory (DFT) predictions published previously. The high degree of uniformity evident from in situ titration measurements leads to a congruence in mechanistic inferences made from steady-state catalytic, transient stoichiometric, isotopic exchange, and isotopic tracer data that all point to a sequential mechanism comprised of separate oxidation and reduction half-cycle steps conjoined by an active oxygen intermediate. In situ XAS data reinforce mechanistic conclusions derived from kinetic analysis, and suggest that the active oxygen intermediate may be more appropriately characterized as an iron-oxyl (Fe 3+ –O – ) rather than an iron-oxo (Fe 4+ =O 2– ) species. The Cr analogue of MIL-100 exhibits contrasting rate features that can be rationalized using an identical sequence of steps as MIL-100(Fe), but with a highly dissimilar set of kinetic parameters that can also be validated using transient stoichiometric experiments. The larger coverages of active oxygen intermediates on MIL-100(Cr) are consistent with predictions from prior DFT studies that suggest more stable and less reactive active oxygen species for metals with lower d-electron counts, and point to metal identity as a lever for precisely controlling the kinetic relevance of oxidation and reduction half-cycles in catalytic redox sequences over polymetal oxo clusters. Importantly, the results presented point to the utility of developing broadly applicable structure–catalytic property relationships over MOF nodes specifically, and highly uniform catalysts more generally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1981

Quantum chemical calculation of the equilibrium structures of small metal atom clusters

The application of ab initio quantum mechanical approaches in the study of metal atom clusters requires simplifying techniques that do not compromise the reliability of the calculations. Various aspects of the implementation of the effective core potential (ECP) technique for the removal of the metal atom core electrons from the calculation were examined. The ECP molecular integral formulae were modified to bring out the shell characteristics as a first step towards fulfilling the increasing need to speed up the computation of the ECP integrals. Work on the relationships among the derivatives of the molecular integrals that extends some of the techniques pioneered by Komornicki for the calculation of the gradients of the electronic energy was completed and a formulation of the ECP approach that quite naturally unifies the various state-of-the-art "shape- and Hamiltonian-consistent" techniques was discovered.

Kahn, L. R.↗
NASA NTRS1985

Theoretical research program to study transition metal trimers and embedded clusters

Small transition metal clusters at a high level of approximation i.e. including all the valence electrons in the calculation and also including extensive electron correlation were studied. Perhaps the most useful end result of these studies is the qualitative information about the electronic structure of these small metal clusters, including the nature of the bonding. The electronic structure studies of the small clusters are directly applicable to problems in catalysis. From comparison of dimers, trimers and possibly higher clusters, it is possible to extrapolate the information obtained to provide insights into the electronic structure of bulk transition metals and their interaction with other atoms and molecules at both surface and interior locations.

Walch, S. P.↗
DOE OSTI2023

Stable Lithium Plating in “Lithium Metal-Free” Solid-State Batteries Enabled by Seeded Lithium Nucleation

In the “Li 0 -free” architecture, cells are manufactured with a bare anode current collector and the Li metal anode is plated in situ during the first charging step. While this architecture has many attractive qualities from manufacturing and energy density perspectives, stable Li plating in solid-state “Li 0 -free” cells can be challenging. It is generally accepted that the Li overpotential affects Li homogeneity in “Li 0 -free” cells. We demonstrate that the nucleation overpotential for Li plating in solid-state “Li 0 -free” cells using commercial current collectors can be eliminated by introducing metal clusters that guide Li nucleation. Au is used as model alloying metal cluster. Here, we demonstrate stable Li plating with thickness 16.5 μ m (3.3 mAh cm −2 ) in oxide solid-state electrolyte “Li 0 -free” cells enabled by Au metal clusters. It is shown that 97% of the in situ plated Li can be reversibly stripped at 60 °C and 2.5 MPa. Conversely, Au interlayers which are flat and continuous instead of clustered in morphology consistently showed short-circuiting during in situ Li plating, limiting Li electrodeposition to <0.1 mAh cm −2 . These results can help guide future studies of Li nucleation and growth at solid/solid interfaces, as well as offer alternative manufacturing pathways for “Li 0 -free” solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

The Many-Body Expansion for Metals: II. Nonadditive Terms in Clusters Composed of Metals with n s 1 , n s 2 , and n s 2 p 1 Configurations

The many-body expansion (MBE) was applied to homometallic and heterometallic trimers of metals with ns 1 , ns 2 , and ns 2 p 1 configurations to investigate its convergence, the magnitude and nature (stabilizing/destabilizing) of the individual terms and seek an understanding of their variation across the different families of clusters. In particular, we examined the series of alkali metals (Li 3 , Na 3 , K 3 , Li 2 Na, LiNa 2 ), alkali metal borides (Li 2 B and LiB 2 ), and alkaline earth metals (Be 3 , Be 2 Mg, BeMg 3 , and Mg 3 ) trimers, as well as sodium clusters Na n , n = 2–5. Here, we found that there is no uniform contribution (stabilizing or destabilizing) across the series in the different families of trimers. For instance, the 2-B term stabilizes the ground states of the Na 3 (doublet), Na 4 (singlet), and Na 5 (doublet) clusters, and the 3-B term destabilizes them; however, the opposite holds for the quartet state of the Li 3 , Li 2 Na, LiNa 2 , and Na 3 clusters (destabilizing 2-B, stabilizing 3-B). Substituting Li with B in the quartet state of Li 3 results in a significant reduction of the 3-B term amounting to 16% (Li 2 B) and 5% (LiB 3 ) of the binding energy. On the contrary, the ground states of the alkaline earth metal clusters (Be 3 , Be 2 Mg, BeMg 3 , and Mg 3 ) are stabilized by the 3-B term, while the 2-B term destabilizes them. Overall, we find that the 3-B terms significantly stabilize the high-spin multiplicity states of the ns 1 configurations and the low-spin states of the ns 2 configurations. Finally, as the size of the metal increases, the contribution of the 3-B term to the binding energy decreases due to the longer metal–metal bond distances.

Alkali metals↗
DOE OSTI2020

Strong Electronic and Magnetic Coupling in M 4 (M = Ni, Cu) Clusters via Direct Orbital Interactions between Low-Coordinate Metal Centers

In this report we present an extensive study of tetranuclear transition-metal cluster compounds M 4 (NP t Bu 3 ) 4 and [M 4 (NP t Bu 3 ) 4 ][B(C 6 F 5 ) 4 ] (M = Ni, Cu; t Bu = tert -butyl), which feature low-coordinate metal centers and direct metal-metal orbital overlap. X-ray diffraction, electrochemical, magnetic, spectroscopic, and computational analysis elucidate the nature of the bonding interactions in these clusters and the impact of these interactions on the electronic and magnetic properties. Direct orbital overlap results in strongly coupled, large-spin ground states in the [Ni 4 (NP t Bu 3 ) 4 ] +/0 clusters and fully delocalized, spin-correlated electrons. Correlated electronic structure calculations confirm the presence of ferromagnetic ground states that arise from direct exchange between magnetic orbitals, and, in the case of the neutral cluster, itinerant electron magnetism similar to that in metallic ferromagnets. The cationic nickel cluster also possesses large magnetic anisotropy exemplified by a large, positive axial zero-field splitting parameter of D = +7.95 or +9.2 cm -1 , as determined by magnetometry or electron paramagnetic resonance spectroscopy, respectively. The [Ni 4 (NP t Bu 3 ) 4 ] + cluster is also the first molecule with easy-plane magnetic anisotropy to exhibit zero-field slow magnetic relaxation, and under a small applied field, it exhibits relaxation exclusively through an Orbach mechanism with a spin relaxation barrier of 16 cm -1 . The S = 1 / 2 complex [Cu 4 (NP t Bu 3 ) 4 ] + exhibits slow magnetic relaxation via a Raman process on the millisecond time scale, supporting the presence of slow relaxation via an Orbach process in the nickel analogue. Overall, this work highlights the unique electronic and magnetic properties that can be realized in metal clusters featuring direct metal-metal orbital interactions between low-coordinate metal centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Local Distortions and Metal–Semiconductor–Metal Transition in Quasi-One-Dimensional Nanowire Compounds AV 3 Q 3 O δ (A = K, Rb, Cs and Q = Se, Te)

Metal cluster compounds have garnered renewed interest in the search for novel superconductors and topological semimetals owing to structural instabilities of metal-cluster geometries and broken symmetries. Here we synthesized needle-like crystals of the V-cluster-based quasi-one-dimensional (Q1D) materials AV 3 Q 3 O δ (A = K, Rb, Cs, Q= Se, Te) which can also be viewed as being composed of parallel nanowires. We examine how changes in their average and local structure control their electronic properties. All compounds crystallize in the TIFe 3 Te 3 -type structure (P6 3 /m space group) with infinite (V 3 )Q 3 ) - double-walled columnar chains separated by A + cations. Our single-crystal and synchrotron powder diffraction studies indicate oxygen atoms partially occupy the center site of the V 6 octahedral metal cluster cages in KV 3 Te 3 O 0.33 , RbV 3 Te 3 O 0.32 , and CsV 3 Te 3 O 0.35 , whereas KV 3 Se 3 is structurally oxygen-free. Our synchrotron X-ray pair distribution function (PDF) analyses indicate that the oxygen-free V 6 cluster octahedra in KV 3 Se 3 are highly distorted perpendicular to the chain direction even at room temperature, reducing the symmetry of the average structure from hexagonal P6 3 /m to monoclinic P2 1 /m. Our theoretical calculation supports this P2 1 /m distortion and suggests the structure further distorts to P2 1 or P2 1 /c at lower temperatures. In contrast, the oxygen-centered V-cluster in KV 3 Te 3 O 0.33 exhibits a V-3-triangle-trimerization along the chain direction. This feature is discernible from the local PDF and is consistent with lattice dynamical calculations based on density functional theory. Resistivity measurements indicate that KV 3 Se 3 exhibits metallic behavior, whereas a dramatic metal-semiconductor-metal transition emerges in KV 3 Te 3 O 6.33 , RbV 3 Te 3 O 0.32 , and CsV 3 Te 3 O 0.35 because of oxygen disorder and changes in local structure captured from our electronic structure analyses of the Fermi surface. Our investigation of the AV 3 Q 3 O 6 family demonstrates the importance of understanding local changes in structure driven by electronic instabilities, which can guide the search for new quantum materials in other low-dimensional cluster-compound materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metal–Oxo Cluster Formation Using Ammonium and Sulfate to Differentiate M IV (Th, U, Ce) Chemistries

Isolating isostructural compounds of tetravalent metals M IV (Zr, Hf, Ce, Th, U, Pu, Np) improves our understanding of metal hydrolysis and coordination behavior across the periodic table. These metals form polynuclear clusters typified by the hexamer [M IV 6 O 4 (OH) 4 ] 12+ . Exploiting the ammonium M IV -sulfate (Ce IV , Th IV , and U IV ) phase space targeting rapid crystallization, we isolate the common hexamer [M IV 6 (OH) 4 (O) 4 ] 12+ but with different numbers of capping sulfates and water molecules for Ce IV , Th IV , and U IV . Furthermore, these phases allowed a direct comparison of bonding trends across the series. Upon cocrystallization with the hexamers, higher complex structures can be identified. Thorium features assemblies with monomer-linked hexamer chains. Uranium features assemblies with sulfate-bridged hexamers and the supramolecular assembly of 14 hexamers into the U 84 , [U 6 (OH) 4 (O) 4 ) 14 (SO 4 ) 120 (H 2 O) 42 ] 72– . Last, cerium showcases the isolation from monomers to the Ce 62 , [Ce 62 (OH) 30 (O) 58 (SO 4 ) 71 (H 2 O) 33.25 ] 41– . Furthermore, small-angle X-ray scattering (room temperature) shows ammonium-induced cluster assembly for Ce IV but minimal reactivity for U IV and Th IV . In this study, because the phases crystallized at elevated temperature demonstrates favorable cluster assembly, these solution phase results were surprising and suggest some other characteristics such as Ce’s facile redox behavior, contributes to its solution-phase speciation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Excited State Phenomena in Correlated Nanostructures: Transition Metal Oxide Clusters and Nanocrystals

The primary goal of our research program was to apply advanced computational techniques to predict electronic properties of molecular species. These include transition metal monoxide and dioxide clusters and negatively charged copper oxide clusters which are important systems for their utilization in a variety of technological applications. The enhanced electron-electron interactions inherent in these systems make it challenging to model their excited state properties within a parameter-free approach. The excited state properties in question include the interaction of light with these molecules which results in ejection of electrons from the system, or the absorption of light by the molecular system resulting in a molecule in a higher-energy state. Our overall goal was to investigate the impact of various computational and theoretical approaches on such electronic and optical excitations in these systems. Comparing several variants of theoretical approaches with available experimental data, and high-level quantum chemistry computations helped us identify the level of theory and approximations that are needed to achieve a reasonable balance between accuracy and computational demand.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Advances in the electron diffraction characterization of atomic clusters and nanoparticles

Nanoparticles and metallic clusters continue to make a remarkable impact on novel and emerging technologies. In recent years, there have been impressive advances in the controlled synthesis of clusters and their advanced characterization. One of the most common ways to determine the structures of nanoparticles and clusters is by means of X-ray diffraction methods. However, this requires the clusters to crystallize in a similar way to those used in protein studies, which is not possible in many cases. Novel methods based on electron diffraction have been used to efficiently study individual nanoparticles and clusters and these can overcome the obstacles commonly encountered during X-ray diffraction methods without the need for large crystals. These novel methodologies have improved with advances in electron microscopy instrumentation and electron detection. Here, we review advanced methodologies for characterizing metallic nanoparticles and clusters using a variety of electron diffraction procedures. These include selected area electron diffraction, nanobeam diffraction, coherent electron diffraction, precession electron diffraction, scanning transmission electron microcopy diffraction, and high throughput data analytics, which leverage deep learning to reduce the propensity for data errors and translate nanometer and atomic scale measurements into material data.

77 NANOSCIENCE AND NANOTECHNOLOGY↗