Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetostatic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Inert gas test of two 12-cm magnetostatic thrusters

Comparative performance tests were conducted with 12 cm line and ring magnetic cusp thrusters. Shell anode and magnetoelectrostatic containment boundary anode configurations were evaluated with each magnet array. The best performance was achieved with the 12-cm ring cusp-shell anode configuration. Argon operation of this configuration produced 65-81 percent mass utilization efficiency at 170-208 watts/single-charged-equivalent (SCE) ampere beam. Xenon test results showed 75-95 percent utilization at 162-188 watts/SCE ampere beam.

Ramsey, W. D.↗
NASA NTRS1984

Application of the MHD energy principle to magnetostatic atmospheres

The MHD energy principle is applied to the stability of a magnetized atmosphere which is bounded below by much denser fluid, as is the solar corona. The two fluids are treated as ideal; the approximation is consistent with the energy principle, and the dynamical conditions that must hold at a fluid-fluid interface are used to show that if vertical displacements of the lower boundary are premitted, then the lower atmosphere must be perturbed as well. However, displacements which do not perturb the coronal boundary can be properly treated as isolated perturbations of the corona alone.

Zweibel, E. G.↗
NASA NTRS1985

Application of the MHD energy principle to magnetostatic atmospheres

The MHD energy principle is applied to the stability of a magnetized atmosphere which is bounded below by much denser fluid, as is the solar corona. The two fluids are treated as ideal; the approximation is consistent with the energy principle, and the dynamical conditions that must hold at a fluid-fluid interface are used to show that if vertical displacements of the lower boundary are permitted, then the lower atmosphere must be perturbed as well. However, displacements which do not perturb the coronal boundary can be properly treated as isolated perturbations of the corona alone.

Zweibel, E. G.↗
NASA NTRS1999

Magnetostatic Cleanliness of the Radioistope Thermoelectric

This paper describes the field-mapping technique, the numerical modeling and the compensation approach used for the RTGs with the goal of minimizing its magnetic field interference with Cassini's DC magnetic field science instruments.

Magnetics RTG Cassini↗
DOE OSTI2021

Variable-focus magnetostatic lens

Variable-focus solenoidal lenses for charged particle beams with integrated emittance filtering are disclosed. The emittance may be controlled via selection of collimating irises. The focal length may be changed by altering the spacing between two permanent ring magnets.

Lewellen, John↗
DOE OSTI2021

Solving the problem of overdetermination of quasisymmetric equilibrium solutions by near-axis expansions. I. Generalized force balance

It is well known that the process of construction of quasisymmetric magnetic fields in magnetostatic equilibrium with isotropic pressure suffers from the problem of overdetermination. This has led to the widespread belief that global quasisymmetric solutions are likely not to exist. Here we develop a general near-axis expansion procedure that does not rely on the assumption of magnetostatic equilibria with isotropic pressure. We then demonstrate that in equilibria with anisotropic pressure, it is possible to circumvent the problem of overdetermination and carry out the power-series solutions to higher order. This suggests, contrary to current belief, that the existence of globally quasisymmetric fields is likely if one relaxes the assumption of magnetostatic equilibria with isotropic pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1977

Principles of equivalence, Eotvos experiments, and gravitational red-shift experiments - The free fall of electromagnetic systems to post-post-Coulombian order

Free fall in an external static gravitational field of a composite test body consisting of electromagnetically interacting charged particles is analyzed using the TH-epsilon-mu formalism developed by Lightman and Lee (1973). The Lightman and Lee calculation that was carried out to 'post-Coulombian' order is extended to 'post-post-Coulombian' order, and violations of the weak equivalence principle are found which result from the magnetostatic self-energy of the test body. The current generation of Eotvos experiments is shown to test the cited formalism at first order in the external gravitational potential to an accuracy of 4 by 10 to the -10th power for electrostatic energies and 6 by 10 to the -6th power for magnetostatic energies. It is concluded that although the formalism can be tested to an accuracy of 0.04 for electrostatic energies at second order in the gravitational potential, a significant second-order test for magnetostatic energies would require Eotvos experiments accurate to better than one part in 10 to the 15th power.

Haugan, M. P.↗
NASA NTRS1992

Quasi-linear theory and transport theory

The theory of energetic particle scattering by magnetostatic fluctuations is reviewed in so far as it fails to produce the rigidity-independent mean-free-paths observed. Basic aspects of interplanetary magnetic field fluctuations are reviewed with emphasis placed on the existence of dissipation range spectra at high wavenumbers. These spectra are then incorporated into existing theories for resonant magnetostatic scattering and are shown to yield infinite mean-free-paths. Nonresonant scattering in the form of magnetic mirroring is examined and offered as a partial solution to the magnetostatic problem. In the process, mean-free-paths are obtained in good agreement with observations in the interplanetary medium at 1 AU and upstream of planetary bow shocks.

Smith, Charles W.↗
NASA NTRS1996

Computational Analysis of Static and Dynamic Behaviour of Magnetic Suspensions and Magnetic Bearings

Static modelling of magnetic bearings is often carried out using magnetic circuit theory. This theory cannot easily include nonlinear effects such as magnetic saturation or the fringing of flux in air-gaps. Modern computational tools are able to accurately model complex magnetic bearing geometries, provided some care is exercised. In magnetic suspension applications, the magnetic fields are highly three-dimensional and require computational tools for the solution of most problems of interest. The dynamics of a magnetic bearing or magnetic suspension system can be strongly affected by eddy currents. Eddy currents are present whenever a time-varying magnetic flux penetrates a conducting medium. The direction of flow of the eddy current is such as to reduce the rate-of-change of flux. Analytic solutions for eddy currents are available for some simplified geometries, but complex geometries must be solved by computation. It is only in recent years that such computations have been considered truly practical. At NASA Langley Research Center, state-of-the-art finite-element computer codes, 'OPERA', 'TOSCA' and 'ELEKTRA' have recently been installed and applied to the magnetostatic and eddy current problems. This paper reviews results of theoretical analyses which suggest general forms of mathematical models for eddy currents, together with computational results. A simplified circuit-based eddy current model proposed appears to predict the observed trends in the case of large eddy current circuits in conducting non-magnetic material. A much more difficult case is seen to be that of eddy currents in magnetic material, or in non-magnetic material at higher frequencies, due to the lower skin depths. Even here, the dissipative behavior has been shown to yield at least somewhat to linear modelling. Magnetostatic and eddy current computations have been carried out relating to the Annular Suspension and Pointing System, a prototype for a space payload pointing and vibration isolation system, where the magnetic actuator geometry resembles a conventional magnetic bearing. Magnetostatic computations provide estimates of flux density within airgaps and the iron core material, fringing at the pole faces and the net force generated. Eddy current computations provide coil inductance, power dissipation and the phase lag in the magnetic field, all as functions of excitation frequency. Here, the dynamics of the magnetic bearings, notably the rise time of forces with changing currents, are found to be very strongly affected by eddy currents, even at quite low frequencies. Results are also compared to experimental measurements of the performance of a large-gap magnetic suspension system, the Large Angle Magnetic Suspension Test Fixture (LAMSTF). Eddy current effects are again shown to significantly affect the dynamics of the system. Some consideration is given to the ease and accuracy of computation, specifically relating to OPERA/TOSCA/ELEKTRA.

Britcher, Colin P.↗
NASA NTRS1997

Modeling a simple coronal streamer during whole sun month

The solar minimum streamer structure observed during the whole sun month was modeled. The Van de Hulst inversion was used in order to determine the coronal electron density profiles and scale-height temperature profiles. The axisymmetric magnetostatic model of Gibson, Bagenal and Low was also used. The density, temperature, and magnetic field distribution were quantified using both coronal white light data and photospheric magnetic field data from the Wilcox Solar Observatory. The densities and temperatures obtained by the Van de Hulst and magnetostatic models are compared to the magnetic field predicted by the magnetostatic model to a potential field extrapolated from the photosphere.

Gibson, S. E.↗
NASA NTRS1998

A remotely interrogatable sensor for chemical monitoring

A new type of continuously operating, in-situ, remotely monitored sensor is presented. The sensor is comprised of a thin film array of magnetostatically coupled, magnetically soft ferromagnetic thin film structures, adhered to or encased within a thin polymer layer. The polymer is made so that it swells or shrinks in response to the chemical analyte of interest, which in this case is pH. As the polymer swells or shrinks, the magnetostatic coupling between the magnetic elements changes, resulting in changes in the magnetic switching characteristics of the sensor. Placed within a sinusoidal magnetic field the magnetization vector of the coupled sensor elements periodically reverses directions, generating magnetic flux that can be remotely detected as a series of voltage spikes in appropriately placed pickup coils. one preliminary sensor design consists of four triangles, initially spaced approximately 50 micrometers apart, arranged to form a 12 mm x 12 mm square with the triangle tips centered at a common origin. Our preliminary work has focused on monitoring of pH using a lightly crosslinked pH sensitive polymer layer of hydroxyethylmethacrylate and 2-(dimethylamino) ethylmethacrylate. As the polymer swells or shrinks the magnetostatic coupling between the triangles changes, resulting in measurable changes in the amplitude of the detected voltage spirits.

Non-NASA Center↗
DOE OSTI2024

Magnetic Solitons in Hierarchical 3D Magnetic Nanoarchitectures of Nanoflower Shape

Curvilinear magnetism emerged as a new route to tailor properties of magnetic solitons by the choice of geometry and topology of a magnetic architecture. Here, we develop an anodized aluminum oxide template-based approach to realize hierarchical 3D magnetic nanoarchitectures of nanoflower shape. The technique provides defect-free regular arrays of magnetic nanoflowers of tunable shape with a period of 400 nm over cm 2 areas. We combined advanced magnetic imaging methods with micromagnetic simulations to study complex magnetic states in nanoflowers originating due to magnetostatics-driven symmetry break in curvilinear nanomembranes. An interaction between surface and volume magnetostatic charges in 3D curved nanoflowers leads to the stabilization of asymmetric and shifted vortices as well as states with two Bloch lines. Ordered large area arrays of complex-shaped magnetic nanoarchitectures developed in this work are relevant for prospective research on 3D magnonics and spintronics.

3D nanoarchitectures↗
NASA NTRS1980

Evolving force-free magnetic fields. III - States of nonequilibrium and the preflare stage

The paper considers whether a neighboring magnetostatic equilibrium exists to allow a magnetic field initially in a force-free configuration to accommodate any imposed weak pressure. The following problem is treated. The foot points of the field are fixed and the plasma is frozen into the field lines under the approximation of infinite electrical conductivity. A weak pressure is introduced. It is determined infinitesimal plasma displacements exist to adjust the field lines to a new equilibrium without changing the field line connectivity. The analysis is carried out for the bipolar force-free fields forming one of two evolutionary sequences modeling the development of the preflare stage. It was found that for the force-free field corresponding to the quasi-static stage of evolution, the neighboring magnetostatic equilibrium always exists and the imposed gas pressure can be accommodated with a slight departure of the field from being exactly force free.

Low, B. C.↗
NASA NTRS1982

Magnetohydrodynamic equilibrium. III - Helically symmetric fields. IV - Nonequilibrium of nonsymmetric hydrodynamic topologies

It is pointed out that plasma confinement in stable equilibrium states constitutes a fundamental and still unresolved question in plasma astrophysics and thermonuclear fusion research. The problem has two parts related to the equilibrium states themselves and their mechanical stability. The question of the existence of general solutions of the field and fluid equations for the steady dynamical interaction of inviscid compressible fluids of high electrical conductivity with magnetic and gravity fields is considered. In the absence of fluid motions, the presented equations become the familiar equations of magnetostatics supplemented by an equation of state. Starting from this simplest case of magnetostatic equilibrium, the investigation proceeds to the more complex case of magnetohydrodynamic equilibrium. Examples of helically symmetric fields are presented to illustrate the use of the formulation for treating the dynamics of helically symmetric hydromagnetic flows.

Tsinganos, K. C.↗
NASA NTRS1991

A combined vector potential-scalar potential method for FE computation of 3D magnetic fields in electrical devices with iron cores

A method of combined use of magnetic vector potential based finite-element (FE) formulations and magnetic scalar potential (MSP) based formulations for computation of three-dimensional magnetostatic fields is introduced. In this method, the curl-component of the magnetic field intensity is computed by a reduced magnetic vector potential. This field intensity forms the basic of a forcing function for a global magnetic scalar potential solution over the entire volume of the region. This method allows one to include iron portions sandwiched in between conductors within partitioned current-carrying subregions. The method is most suited for large-scale global-type 3-D magnetostatic field computations in electrical devices, and in particular rotating electric machinery.

Wang, R.↗
NASA NTRS1993

Long-term variations of interplanetary magnetic field spectra with implications for cosmic ray modulation

The paper calculates yearly averaged power spectra of interplanetary magnetic field turbulence at 1 AU over the period 1965-1988 for fluctuations in the frequency range 5.8 x 10 exp -6 to 4.6 x 10 exp -5 Hz, corresponding to periods of 6-48 hr. The amplitudes of the spectra vary with the sunspot cycle and are inversely correlated with the intensity of about 10-GeV cosmic rays. The observed spectra are used to calculate a lower limit to the cosmic ray scattering mean free path employing resonant magnetostatic quasi-linear theory for both 'slab' and isotropic geometries of the turbulence. The mean free paths thus obtained are typically about 0.1 AU in the slab model and about 0.3 AU in the isotropic model, but they are not significantly correlated with the modulated galactic cosmic ray intensity recorded by neutron monitors. It is inferred that the scattering processes described by resonant magnetostatic theory play, at best, a very minor role in the solar modulation of about 10-GeV cosmic rays.

Bieber, John W.↗
NASA NTRS2003

Three-Dimensional Magnetic Analysis Technique Developed for Evaluating Stirling Convertor Linear Alternators

The Department of Energy, the Stirling Technology Company (STC), and the NASA Glenn Research Center are developing Stirling convertors for Stirling radioisotope generators to provide electrical power for future NASA deep space missions. STC is developing the 55-We technology demonstration convertor (TDC) under contract to the Department of Energy. The Department of Energy recently named Lockheed Martin as the system integration contractor for the Stirling radioisotope generator development project. Lockheed Martin will develop the Stirling radioisotope generator engineering unit and has contract options to develop the qualification unit and the first flight unit. Glenn s role includes an in-house project to provide convertor, component, and materials testing and evaluation in support of the overall power system development. As a part of this work, Glenn has established an in-house Stirling research laboratory for testing, analyzing, and evaluating Stirling machines. STC has built four 55-We convertors for NASA, and these are being tested at Glenn. A cross-sectional view of the 55-We TDC is shown in the figure. Of critical importance to the successful development of the Stirling convertor for space power applications is the development of a lightweight and highly efficient linear alternator. In support, Glenn has been developing finite element analysis and finite element method tools for performing various linear alternator thermal and electromagnetic analyses and evaluating design configurations. A three-dimensional magnetostatic finite element model of STC's 55-We TDC linear alternator was developed to evaluate the demagnetization fields affecting the alternator magnets. Since the actual linear alternator hardware is symmetric to the quarter section about the axis of motion, only a quarter section of the alternator was modeled. The components modeled included the mover laminations, the neodymium-iron-boron magnets, the stator laminations, and the copper coils. The three-dimensional magnetostatic model was then coupled with a circuit simulator model of the alternator load and convertor controller. The coupled model was then used to generate alternator terminal voltage and current predictions. The predicted voltage and current waveforms agreed well with the experimental data, which tended to validate the accuracy of the coupled model. The model was then used to generate predictions of the demagnetization fields acting on the alternator magnets for the alternator under load. The preliminary model predictions indicate that the highest potential for demagnetization is along the inside surface of the uncovered magnets. The demagnetization field for the uncovered magnets when the mover is positioned at the end of a stroke is higher than it is when the mover is at the position of maximum induced voltage or maximum alternator current. Assuming normal load conditions, the model predicted that the onset of demagnetization is most likely to occur for magnet temperatures above 101 C.

Geng, Steven M.↗