Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Liberation and release of rare earth minerals from Middle Kittanning, Fire Clay, and West Kentucky No. 13 coal sources

Here, a laboratory REE release test procedure was designed to better understand the association and liberation characteristics of rare earth elements (REEs) from coal-based material, such as coal middlings and refuse. For this particular study, three samples of mixed-phase, middling material was collected from three coal preparation plants operating in three different coal basins and coal seams, namely Fire Clay, Middle Kittanning, and West Kentucky #13. In these release tests, the mixed-phase material was first ground in a laboratory ball mill for a designated amount of time and subsequently decarbonized using staged flotation. The REE content of the high ash tailings and low ash concentrate was determined, and the process was repeated for various target grind sizes down to the micron range. The results indicate that smaller grind sizes produce increased REE concentrations in the high ash tailings, and this result is predominantly driven by the increased ash content in the decarbonized tailings. The grinding characteristics of the Fire Clay coal source showed that more energy is needed to achieve the desired particle size reduction; however further size reduction of this sample resulted in a significantly higher ash and REE content in the tailings material due to improved liberation. For the Middle Kittanning and West Kentucky #13 sources, the grinding and release data indicates that the mineral matter is liberated at a coarser particle size, and micronizing the coals only produces marginal improvements in rare earth mineral liberation and recovery.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2017

Reduction and Simultaneous Removal of 99 Tc and Cr by Fe(OH) 2 (s) Mineral Transformation

Technetium (Tc) remains a priority remediation concern due to persistent challenges, including rapid re-oxidation of immobilized Tc, and competing contaminants, e.g. Cr(VI), that inhibit targeted Tc reduction and incorporation into stable mineral phases. Here Fe(OH) 2 (s) is investigated as a comprehensive solution for overcoming these challenges, by serving as both the reductant, (Fe(II)), and immobilization agent to form Tc-incorporated magnetite (Fe 3 O 4 ). Trace metal analysis suggests removal of Tc(VII) and Cr(VI) from solution occurs simultaneously; however, complete removal and reduction of Cr(VI) is achieved earlier than the removal/reduction of co-mingled Tc(VII). Bulk oxidation state analysis of the magnetite solid phase by XANES confirms that the majority of Tc is Tc(IV), which is corroborated by XPS. Furthermore, EXAFS results show successful Tc(IV) incorporation into magnetite octahedral sites without additional substitution of Cr or Tc into neighboring Fe octahedral sites. XPS analysis of Cr confirms reduction to Cr(III) and the formation of a Cr-incorporated spinel, Cr2O 3 , and Cr(OH)3 phases. Spinel (modeled as Fe 3 O 4 ), goethite, and feroxyhyte are detected in all reacted solid phase samples analyzed by XRD, where Tc(IV) incorporation has little effect on the spinel lattice structure. In the presence of Cr(III) a spinel phase along the magnetite-chromite (Fe 3 O 4 -FeCr 2 O 4 ) solid-solution line is formed.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2025

Modeling Pb(II) Adsorption on Mineral Surfaces: Bridging Density Functional Theory and Experiment with Thermodynamic Insights

Despite decades of work on aqueous lead (Pb) adsorption on a-Fe2O3 (hematite) and a-Al2O3 (alumina), gaps between measurements and modeling obscure molecular-level understanding. Achieving well-matched geometries between theory and experimental for mineral-water interfaces is a hurdle, as surface functional group type and distribution must be accounted for in determining mechanisms. Additionally, computational methods that can describe the substrate are often not appropriate to capture aqueous effects. Progress requires focusing on well-studied and relevant systems, such as key facets (001),(012), and (110) of hematite and alumina, and ubiquitous contaminants such as aqueous Pb. In the past, bulk-parametrized bond-valence principles were used to rationalize Pb(II) adsorption trends. These approaches can break down at surfaces, where flexible bonding environments and adsorption-induced surface relaxations play a critical role. Here, we adapt and apply a density functional theory (DFT) and thermodynamics framework, integrating DFT-calculated energies with experimental data and electrochemical principles, to predict Pb(II) adsorption. Our model results capture trends across the full set of surfaces and predict that inner-sphere Pb(II) sorption on (001) alumina varies from unfavorable to weakly favorable across a range of pH conditions. This aligns with experiment insights that Pb(II) interacts at that surface through outer-sphere interactions. Extending to Fe(II) adsorption, we demonstrate a coverage-dependent site preference, potentially explaining disorder in overlayers grown by the oxidative adsorption of Fe(II) on hematite (001).

lead contamination↗
DOE OSTI2021

The temperature sensitivity of soil: microbial biodiversity, growth, and carbon mineralization

Abstract Microorganisms drive soil carbon mineralization and changes in their activity with increased temperature could feedback to climate change. Variation in microbial biodiversity and the temperature sensitivities (Q10) of individual taxa may explain differences in the Q10 of soil respiration, a possibility not previously examined due to methodological limitations. Here, we show phylogenetic and taxonomic variation in the Q10 of growth (5–35 °C) among soil bacteria from four sites, one from each of Arctic, boreal, temperate, and tropical biomes. Differences in the temperature sensitivities of taxa and the taxonomic composition of communities determined community-assembled bacterial growth Q10, which was strongly predictive of soil respiration Q10 within and across biomes. Our results suggest community-assembled traits of microbial taxa may enable enhanced prediction of carbon cycling feedbacks to climate change in ecosystems across the globe.

Wang, Chao (ORCID:0000000257567505)↗
DOE OSTI2019

Organic-Mineral Interfacial Chemistry Drives Heterogeneous Nucleation of Sr-Rich (Bax, Sr1-x)SO4 from Undersaturated Solution

Sr-bearing marine barite [(Bax, Sr1-x)SO4] cycling has been widely used to reconstruct geochemical evolutions of paleoenvironments. However, an understanding of barite precipitation in the ocean, which is globally undersaturated with respect to barite, is missing. Moreover, the reason for the occurrence of higher Sr content in marine barites than expected for classical crystal growth processes remains unknown. Field data analyses suggested that organic molecules may regulate the formation and composition of marine barites; however, the specific organic–mineral interactions are unclear. Using in situ grazing incidence small-angle X-ray scattering (GISAXS), size and total volume evolutions of barite precipitates on organic films were characterized. The results show that barite forms on organic films from undersaturated solutions. Moreover, from a single supersaturated solution with respect to barite, Sr-rich barite nanoparticles formed on organics, while micrometer-size Sr-poor barites formed in bulk solutions. Ion adsorption experiments showed that organic films can enrich cation concentrations in the adjacent solution, thus increasing the local supersaturation and promoting barite nucleation on organic films, even when the bulk solution was undersaturated. The Sr enrichment in barites formed on organic films was found to be controlled by solid-solution nucleation rates; instead, the Sr-poor barite formation in bulk solution was found to be controlled by solid-solution growth rates. This study provides a mechanistic explanation for Sr-rich marine barite formation and offers insights for understanding and controlling the compositions of solid solutions by separately tuning their nucleation and growth rates via the unique chemistry of solution–organic interfaces.

Deng, Ning↗
DOE OSTI2020

Soils' dirty little secret: Depth–based comparisons can be inadequate for quantifying changes in soil organic carbon and other mineral soil properties

Quantifying changes in soil organic carbon (SOC) stocks and other soil properties is essential for understanding how soils will respond to land management practices and global change. Although they are widely used, comparisons of SOC stocks at fixed depth (FD) intervals are subject to errors when changes in bulk density or soil organic matter occur. The equivalent soil mass (ESM) method has been recommended in lieu of FD for assessing changes in SOC stocks in mineral soils, but ESM remains underutilized for SOC stocks and has rarely been used for other soil properties. In this paper, we draw attention to the limitations of the FD method and demonstrate the advantages of the ESM approach. We provide illustrations to show that the FD approach is susceptible to errors not only for quantifying SOC stocks but also for soil mass-based properties such as SOC mass percent, C:N mass ratio, and δ 13 C. Here we describe the ESM approach and show how it mitigates the FD method limitations. Using bulk density change simulations applied to an empirical dataset from bioenergy cropping systems, we show that the ESM method provides consistently lower errors than FD when quantifying changes in SOC stocks and other soil properties. To simplify the use of ESM, we detail how the method can be integrated into sampling schemes, and we provide an example R computer script that can perform ESM calculations on large datasets. We encourage future studies, whether temporal or comparative, to utilize sampling methods that are amenable to the ESM approach. Overall, we agree with previous recommendations that ESM should be the standard method for evaluating SOC stock changes in mineral soils, but we further suggest that ESM may also be preferred for comparisons of other soil properties including mass percentages, elemental mass ratios, and stable isotope composition.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Application of Ion Sieve Sorbent Prepared from Mineral Stream Associated with Critical Minerals in Direct Lithium Extraction

In this presentation, the speaker discusses the research that has been carried out at NETL regarding direct lithium extraction. The three main discussing points are as follows: developing high-capacity lithium-ion sieve sorbent using mineral streams associated with critical minerals; demonstrating the sorbent ability to recover lithium from oil/gas produced waters and geothermal brines; and assessing the feasibility of large-scale implementation through technoeconomic analysis.

Cheng, Chin-Min [NETL Site Support Contractor, Nat↗
NASA NTRS1978

Kinetic measurements of bone mineral metabolism: The use of Na-22 as a tracer for long-term bone mineral turnover studies

Sodium-22 was studied as a tracer for bone mineral metabolism in rats and dogs. When incorporated into bone during growth from birth to adulthood, the bone becomes uniformly tagged with (22)Na which is released through the metabolic turnover of the bone. The (22)Na which is not incorporated in the bone matrix is rapidly excreted within a few days when animals are fed high but nontoxic levels of NaCl. The (22)Na tracer can be used to measure bone mineral loss in animals during space flight and in research on bone disease.

Palmer, H. E.↗
DOE OSTI2020

Acid Erosion of Carbonate Fractures and Accessibility of Arsenic-Bearing Minerals: In Operando Synchrotron-Based Microfluidic Experiment

Underground flows of acidic fluids through fractured rock can create new porosity and increase accessibility to hazardous trace elements such as arsenic. In this study, we developed a custom microfluidic cell for an in operando synchrotron experiment using X-ray attenuation. The experiment mimics reactive fracture flow by passing an acidic fluid over a surface of mineralogically heterogeneous rock from the Eagle Ford shale. Over 48 h, calcite was preferentially dissolved, forming an altered layer 200–500 μm thick with a porosity of 63–68% and surface area >10$\times$ higher than that in the unreacted shale as shown by xCT analyses. Calcite dissolution rate quantified from the attenuation data was 3 $\times$ 10 –4 mol/m 2 s and decreased to 3 $\times$ 10 –5 mol/m 2 s after 24 h because of increasing diffusion limitations. Erosion of the fracture surface increased access to iron-rich minerals, thereby increasing access to toxic metals such as arsenic. Quantification using XRF and XANES microspectroscopy indicated up to 0.5 wt % of As(-I) in arsenopyrite and 1.2 wt % of As(V) associated with ferrihydrite. This study provides valuable contributions for understanding and predicting fracture alteration and changes to the mobilization potential of hazardous metals and metalloids.

58 GEOSCIENCES↗
DOE OSTI2026

Critical Minerals Leadership Academy: Building a Cross-Disciplinary Workforce for the Evolving Critical Minerals Sector

This presentation was submitted to the Society for Mining, Metallurgy, and Exploration (SME) MineXchange annual conference in Salt Lake City, Utah. This abstract and subsequent presentation provide an overview of the Critical Minerals Leadership Academy (CMLA) that took place in Laramie, Wyoming in August of 2025. The presentation includes information regarding the development of the CMLA, a review of the event, and information regarding participants, their backgrounds and future intentions.

58 GEOSCIENCES↗
DOE OSTI2020

Plant‐mediated methane transport in emergent and floating‐leaved species of a temperate freshwater mineral‐soil wetland

Abstract Methane flux from freshwater mineral‐soil (FWMS) wetlands and its variability among sites is largely modulated by plant‐mediated transport. However, plant‐mediated transport processes are rarely resolved in land surface models and are poorly parametrized for plants commonly found in FWMS wetlands. Here, relationships between methane flux and CO 2 uptake, as well as plant conductance of methane were evaluated for three plant species and two characteristic functional types: emergent (narrow‐leaved cattail) and floating‐leaved (American lotus and water lily). We found significant but contrasting correlations between methane flux and CO 2 uptake in cattails ( r 2 = 0.51, slope = −0.16, during morning) and water lily ( r 2 = 0.32, slope = 0.064, after midday). This relationship was not significant in American lotus, showing that stomata regulation of methane fluxes is species‐specific and not generalizable across the floating‐leaved plant functional type. Conductance of methane per leaf area showed distinct seasonal dynamics across species. Conductance was similar among the floating‐leaved species (6.2 × 10 −3 m d −1 in lotus and 7.2 × 10 −3 m d −1 in water lily) and higher than conductance in the emergent species (2.7 × 10 −3 m d −1 ). Our results provide direct observations of plant conductance rates and identify the vegetation parameters (leaf area, stomatal conductance) that modify them. Our results further suggest that models of methane emissions from FWMS should parameterize plant‐mediated transport in different plant functional types, scaled by leaf area and with variable seasonal phenological dynamics, and consider possible species‐specific mechanisms that control methane transport through plants.

Villa, Jorge A.↗
DOE OSTI2019

How Microstructure and Pore Moisture Affect Strength Gain in Portlandite-Enriched Composites That Mineralize CO 2

Binders containing portlandite (Ca(OH) 2 ) can take up carbon dioxide (CO 2 ) from dilute flue gas streams (<15% CO 2 , v/v), thereby forming carbonate compounds with binding attributes. While the carbonation of portlandite particulates is straightforward, it remains unclear how CO 2 transport into monoliths is affected by microstructure and pore moisture content. Therefore, this study elucidates the influences of pore saturation and CO 2 diffusivity on the carbonation kinetics and strength evolution of portlanditeenriched composites (“mortars”). To assess the influences of microstructure, composites hydrated to different extents and conditioned to different pore saturation levels (S w ) were exposed to dilute CO 2 . First, reducing saturation increases the gas diffusivity and carbonation kinetics so long as saturation exceeds a critical value (S w,c ≈ 0.10) independent of microstructural attributes. Second, careful analysis reveals that both traditional cement hydration and carbonation offer similar levels of strengthening, the magnitude of which can be estimated from the extent of each reaction. As a result, portlandite-enriched binders offer cementation performance that is similar to traditional materials while offering an embodied CO 2 footprint that is more than 50 % smaller. Furthermore, these insights are foundational to create new “low-CO 2 ” cementation agents via in situ CO 2 mineralization (utilization) using dilute CO 2 waste streams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Morphological instability of aqueous dissolution of silicate glasses and minerals [Nonlinear dynamics of aqueous dissolution of silicate glasses and minerals: Morphological instability]

Understanding of aqueous dissolution of silicate glasses and minerals is of great importance to both Earth science and materials science. Silicate dissolution exhibits complex temporal evolution and spatial pattern formations. Recently, we showed how observed complexity could emerge from a simple self-organizational mechanism: dissolution of the silica framework in a material could be catalyzed by the cations released from the reaction itself. This mechanism enables us to systematically predict many key features of a silicate dissolution process including the occurrence of a sharp corrosion front (vs. a leached surface layer), oscillatory dissolution and multiple stages of the alteration process (e.g., an alteration rate resumption at a late stage of glass dissolution). Here, through a linear stability analysis, we show that this same mechanism can also lead to morphological instability of an alteration front, which, in combination with oscillatory dissolution, can potentially lead to a whole suite of patterning phenomena, as observed on archaeological glass samples, including wavy dissolution fronts, growth rings, incoherent bandings of alteration products, and corrosion pitting. Here, the result thus further demonstrates the importance of the proposed self-accelerating mechanism in silicate material degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Mineral-Doped Micromodel Platform Demonstrates Fungal Bridging of Carbon Hot Spots and Hyphal Transport of Mineral-Derived Nutrients

Fungal species are foundational members of soil microbiomes, where their contributions in accessing and transporting vital nutrients is key for community resilience. To date, the molecular mechanisms underlying fungal mineral weathering and nutrient translocation in low-nutrient environments remain poorly resolved due to the lack of a platform for spatial analysis of biotic weathering processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Developing Methods to Assess Changes in Mechanical Properties of Shale Modified by Engineered Mineral Precipitation

Fractures in subsurface shale formations serve multiple purposes, for example, in the recovery of resources in hydraulic fracturing or as potential harmful leakage passages through caprocks that may contribute undesired fluids to the atmosphere or functional groundwater aquifers. A proposed method to seal or influence fracture properties is Ureolysis-Induced Calcium Carbonate Precipitation (UICP), a bio-mineralization technology driven by the enzymatic hydrolysis of urea, resulting in the formation of calcium carbonate. The resulting calcium carbonate can bridge the gaps in fractured shale and reduce fluid flow through fractures. This study represents the first step toward determining the influence of UICP treatment on shale material and its subsequent mechanical strength properties. The goal of this preliminary work is twofold: first, we aim to identify a method to test tensile strength along a core axis and second, we seek to assess the effect of temperature on the tensile strength of intact, unfractured shale cores (2.54 cm (1 in) diameter, 5.08 cm (2 in) long for comparison with future fractured and UICP-treated cores. A modified Brazilian indirect tensile strength test successfully measured splitting tensile strength of shale cores from Eagle Ford and Wolfcamp formations at room temperature and 60°C.

clastic rock↗