Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Atomic structure and grain shape evolution of nanodiamond during annealing in oxidizing atmosphere from neutron diffraction and MD simulations

In this work, real space pair-distribution function (PDF) analysis in conjunction with molecular dynamics (MD) simulations was applied to characterize crystal structure, shape and surface structure of diamond nanoparticles annealed in air up to 880 °C. MD simulated models of individual nanodiamond particles of various shapes and sizes were used to calculate theoretical radial distribution functions G(r) for powders with different grain size distributions. The calculated curves, showing distinct differences for the explored parameter space, were compared to the experimental G(r) functions obtained from neutron scattering for annealed detonated nanodiamond samples in a search for a model best describing the actual powders. It was found that as-synthesized nanodiamond grains are terminated by equally abundant (100), (110) and (111) crystallographic faces and their structure does not change upon annealing in air up to 280 °C. The shape and size of grains annealed above 480 °C changes due to surface etching. The etching rate differs between crystals faces and depends on temperature, resulting in the observed differences in grain shape. Below 680 °C the share of the (110) facets gradually increases and at 680 °C the grains become rhombic dodecahedra terminated solely by (110) surfaces. Further increase of the annealing temperature promotes formation of (111) surfaces and at 880 °C the preferred grain shape becomes an octahedron terminated by a variant of (111) surfaces possessing three dangling sp3 bonds per atom. At lower temperatures all grains become smaller and the size distribution moves towards the lower values. Furthermore, as the annealing temperature increases, the smallest grains disappear entirely and the average grain size grows back.

36 MATERIALS SCIENCE↗

Multiple Conformational States Contribute to the 3D Structure of a Glucan Decasaccharide: A Combined SAXS and MD Simulation Study

The inherent flexibility of carbohydrates is dependent on stereochemical arrangements, and characterization of their influence and importance will give insight into the three-dimensional structure and dynamics. In this study, a beta-(1 -> 4)/beta-(1 -> 3)-linked glucosyl decasaccharide is experimentally investigated by synchrotron small-angle X-ray scattering from which its radius of gyration (R-g) is obtained. Molecular dynamics (MD) simulations of the decasaccharide show four populated states at each glycosidic linkage, namely, syn- and anti-conformations. The calculated R-g values from the MD simulation reveal that in addition to syn-conformers the presence of anti-psi conformational states is required to reproduce experimental scattering data, unveiling inherent glycosidic linkage flexibility. The CHARMM36 force field for carbohydrates thus describes the conformational flexibility of the decasaccharide very well and captures the conceptual importance that anti-conformers are to be anticipated at glycosidic linkages of carbohydrates.

Jo, Sunhwan↗

Translational and Rotational Motion of C8 Aromatics Adsorbed in Isotropic Porous Media (MOF-5): NMR Studies and MD Simulations

For this, we combined nuclear magnetic resonance (NMR) and molecular dynamics (MD) simulation to study xylene behavior in MOF-5, probing the effects of adsorbate geometry in a weakly interacting model isotropic metal organic framework (MOF) system. We employed NMR diffusometry and relaxometry techniques at low field (13 MHz) to quantify the self-diffusion coefficients (D s ) and the longitudinal relaxation times (T 1 ) of xylenes in MOF-5 as a function of temperature at the saturated loading for each xylene. These experiments reveal the translational motion activation energies to be 15.3, 19.7, and 21.2 kj mol -1 and the rotational activation energies to be 47.26, 12.88, and 11.55 for the (p-, m-, o-) xylene isomers, respectively. Paraxylene exhibits faster translational motion, yet shows four times the activation energy barrier for rotational motion vis-à-vis the other isomers. MD simulations performed on these model systems corroborate the findings for paraxylene and suggest that paraxylene has the lower free energy barrier for hopping away from its binding sites, yet has the slowest rotational motion in the plane of the xylene molecule.

36 MATERIALS SCIENCE↗

Near quantitative agreement of model free DFT- MD predictions with XAFS observations of the hydration structure of highly charged transition metal ions

DFT-MD simulations (PBE96 and PBE0) with MD-XAFS scattering calculations (FEFF9) show near quantitative agreement with new and existing XAFS measurements for a comprehensive series of transition metal ions which interact with their hydration shells via complex mechanisms (high spin, covalency, charge transfer, etc.). This work was supported by the U.S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory (PNNL) is operated for the U.S. DOE by Battelle. A portion of the research was performed using EMSL, a national scientific user facility sponsored by the U.S. DOE's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

Environmental Molecular Sciences Laboratory↗

Structure and water exchange dynamics of hydrated oxo halo ions in aqueous solution using QMCF MD simulation, large angle X-ray scattering and EXAFS

Theoretical ab initio quantum mechanical charge field molecular dynamics (QMCF MD) has been applied in conjunction with experimental large angle X-ray scattering (LAXS) and EXAFS measurements to study structure and dynamics of the hydrated oxo chloro anions chlorite, ClO 2 – , chlorate, ClO 3 – , and perchlorate, ClO 4 – . In addition, the structures of the hydrated hypochlorite, ClO – , bromate, BrO 3 – , iodate, IO 3 – and metaperiodate, IO 4 – , ions have been determined in aqueous solution by means of LAXS. The structures of the bromate, metaperiodate, and orthoperiodate, H 2 IO 6 3– , ions have been determined by EXAFS as solid sodium salts and in aqueous solution as well. The results show clearly that the only form of periodate present in aqueous solution is metaperiodate. The Cl–O bond distances in the hydrated oxo chloro anions as determined by LAXS and obtained in the QMCF MD simulations are in excellent agreement, being 0.01–0.02 Å longer than in solid anhydrous salts due to hydration through hydrogen bonding to water molecules. The oxo halo anions, all with unit negative charge, have low charge density making them typical structure breakers, thus the hydrogen bonds formed to the hydrating water molecules are weaker and more short-lived than those between water molecules in pure water. The water exchange mechanism of the oxo chloro anions resembles those of the oxo sulfur anions with a direct exchange at the oxygen atoms for perchlorate and sulfate. Here, the water exchange rate for the perchlorate ion is significantly faster, τ 0.5 = 1.4 ps, compared to the hydrated sulfate ion and pure water, τ 0.5 = 2.6 and 1.7 ps, respectively. The angular radial distribution functions show that the chlorate and sulfite ions have a more complex water exchange mechanism. As the chlorite and chlorate ions are more weakly hydrated than the sulfite ion the spatial occupancy is less well-defined and it is not possible to follow any well-defined migration pattern as it is difficult to distinguish between hydrating water molecules and bulk water in the region close to the ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computation of shear viscosity of colloidal suspensions by SRD-MD

The behaviour of sheared colloidal suspensions with full hydrodynamic interactions (HIs) is numerically studied. To this end, we use the hybrid stochastic rotation dynamics-molecular dynamics (SRD-MD) method. The shear viscosity of colloidal suspensions is computed for different volume fractions, both for dilute and concentrated cases. We verify that HIs help in the collisions and the streaming of colloidal particles, thereby increasing the overall shear viscosity of the suspension. Our results show a good agreement with known experimental, theoretical, and numerical studies. This work demonstrates the ability of SRD-MD to successfully simulate transport coefficients that require correct modelling of HIs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The structure and IR signatures of the arginine-glutamate salt bridge. Insights from the classical MD simulations

Salt bridges and ionic interactions play an important role in protein stability, protein-protein interactions, and protein folding. Here, we provide the classical MD simulations of the structure and IR signatures of the arginine (Arg)–glutamate (Glu) salt bridge. The Arg-Glu model is based on the infinite polyalanine antiparallel two-stranded β-sheet structure. The 1 μs NPT simulations show that it preferably exists as a salt bridge (a contact ion pair). Bidentate (the end-on and side-on structures) and monodentate (the backside structure) configurations are localized [Donald et al., Proteins 79, 898–915 (2011)]. These structures are stabilized by the short {sup +}N–H⋯O{sup −} bonds. Their relative stability depends on a force field used in the MD simulations. The side-on structure is the most stable in terms of the OPLS-AA force field. If AMBER ff99SB-ILDN is used, the backside structure is the most stable. Compared with experimental data, simulations using the OPLS all-atom (OPLS-AA) force field describe the stability of the salt bridge structures quite realistically. It decreases in the following order: side-on > end-on > backside. The most stable side-on structure lives several nanoseconds. The less stable backside structure exists a few tenth of a nanosecond. Several short-living species (solvent shared, completely separately solvated ionic groups ion pairs, etc.) are also localized. Their lifetime is a few tens of picoseconds or less. Conformational flexibility of amino acids forming the salt bridge is investigated. The spectral signature of the Arg-Glu salt bridge is the IR-intensive band around 2200 cm{sup −1}. It is caused by the asymmetric stretching vibrations of the {sup +}N–H⋯O{sup −} fragment. Result of the present paper suggests that infrared spectroscopy in the 2000–2800 frequency region may be a rapid and quantitative method for the study of salt bridges in peptides and ionic interactions between proteins. This region is usually not considered in spectroscopic studies of peptides and proteins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rotational bands in 249 Md

Rotational structures in 249 Md have been observed for the first time. One set of states forms a pair of strongly coupled bands with relatively strong E2 transitions and no identifiable M1 transitions between the two signature partners. Another set of states suggests a decoupled sequence of E2 transitions. Furthermore, these bands are assigned as based on the 7/2 − [514] and on the favored signature of the 1/2 - [521] Nilsson level, respectively. Based on previous decay studies, these levels are thought to be the ground state and first excited state of 249 Md, which also agrees with theoretical predictions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Competition between mass-symmetric and asymmetric fission modes in 258 Md produced in the 4 He+ 254 Es reaction

Earlier studies of spontaneous fission of heavy actinides found that the fission-fragment mass distribution suddenly changes from predominantly asymmetric to symmetric, when the mass number of the fissioning nucleus becomes larger than A c = 257. We have measured for the first time fission-fragment mass and totalkinetic-energy (TKE) distributions of the excited compound nucleus 258 Md∗ (Z = 101), populated in the reaction 4 He + 254 Es, using the rare radioactive target isotope 254 Es with a short half-life, T1/2 = 275.7 d. The fission of 258 Md∗ can be interpreted as involving three fission modes: one mass-asymmetric and two mass-symmetric fission modes, the latter two are manifested by different TKE values. In this assumption, symmetric and asymmetric fission modes have nearly similar yields at the excitation energy of 15.0 MeV. The spectrum of 18.0 MeV can be explained as due to the increase of asymmetric fission mode.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Turbidity and suspended sediment data for Gwynns Falls, Baisman Run, and Pond Branch, Baltimore County and Baltimore City, MD, USA

This resource includes turbidity and suspended sediment data collected at two sampling stations located on Gwynns Falls in Baltimore County, MD, USA. In addition, two forested reference sites, Baisman Run and Pond Branch at Oregon Ridge, and two urban sites, Dead Run and Maiden's Choice Run (tributaries to Gwynns Falls), were sampled in Baltimore County and Baltimore City, MD, USA. Turbidity sensor data were collected at a 5-minute frequency using YSI EXO2 sondes. Suspended sediment was collected using ISCO samplers for the purpose of establishing correlations between turbidity and suspended sediment concentration. The six sites are co-located with USGS stream gages. This resource is part of the Baltimore Social-Environmental Collaborative Urban Integrated Field Laboratory supported by Department of Energy as well as the Critical Zone Collaborative Network supported by National Science Foundation. This resource includes a technical report summarizing the findings.

58 GEOSCIENCES↗

Carbon Nanotubes in Water: MD Simulations of Internal and External Flow, Self Organization

We have developed computational tools, based on particle codes, for molecular dynamics (MD) simulation of carbon nanotubes (CNT) in aqueous environments. The interaction of CNTs with water is envisioned as a prototype for the design of engineering nano-devices, such as artificial sterocillia and molecular biosensors. Large scale simulations involving thousands of water molecules are possible due to our efficient parallel MD code that takes long range electrostatic interactions into account. Since CNTs can be considered as rolled up sheets of graphite, we expect the CNT-water interaction to be similar to the interaction of graphite with water. However, there are fundamental differences between considering graphite and CNTs, since the curvature of CNTs affects their chemical activity and also since capillary effects play an important role for both dynamic and static behaviour of materials inside CNTs. In recent studies Gordillo and Marti described the hydrogen bond structure as well as time dependent properties of water confined in CNTs. We are presenting results from the development of force fields describing the interaction of CNTs and water based on ab-initio quantum mechanical calculations. Furthermore, our results include both water flows external to CNTs and the behaviour of water nanodroplets inside heated CNTs. In the first case (external flows) the hydrophobic behaviour of CNTs is quantified and we analyze structural properties of water in the vicinity of CNTs with diagnostics such as hydrogen bond distribution, water dipole orientation and radial distribution functions. The presence of water leads to attractive forces between CNTs as a result of their hydrophobicity. Through extensive simulations we quantify these attractive forces in terms of the number and separation of the CNT. Results of our simulations involving arrays of CNTs indicate that these exhibit a hydrophobic behaviour that leads to self-organising structures capable of trapping water clusters. In the second case (internal flows) we study the behaviour of water droplets confined inside CNTs. Constant temperature simulations allow us to capture structural properties such as the contact angles and density profiles of the equilibrated drops. By heating and subsequently cooling of the CNT, we are able to measure the evaporation and the condensation rate of the entrapped water.

Jaffe, Richard L.↗

Full-Scale Crash Test of a MD-500 Helicopter with Deployable Energy Absorbers

A new externally deployable energy absorbing system was demonstrated during a full-scale crash test of an MD-500 helicopter. The deployable system is a honeycomb structure and utilizes composite materials in its construction. A set of two Deployable Energy Absorbers (DEAs) were fitted on the MD-500 helicopter for the full-scale crash demonstration. Four anthropomorphic dummy occupants were also used to assess human survivability. A demonstration test was performed at NASA Langley's Landing and Impact Research Facility (LandIR). The test involved impacting the helicopter on a concrete surface with combined forward and vertical velocity components of 40-ft/s and 26-ft/s, respectively. The objectives of the test were to evaluate the performance of the DEA concept under realistic crash conditions and to generate test data for validation of dynamic finite element simulations. Descriptions of this test as well as other component and full-scale tests leading to the helicopter test are discussed. Acceleration data from the anthropomorphic dummies showed that dynamic loads were successfully attenuated to within non-injurious levels. Moreover, the airframe itself survived the relatively severe impact and was retested to provide baseline data for comparison for cases with and without DEAs.

Kellas, Sotiris↗

Full-Scale Crash Test of an MD-500 Helicopter

A full-scale crash test was successfully conducted in March 2010 of an MD-500 helicopter at NASA Langley Research Center s Landing and Impact Research Facility. The reasons for conducting this test were threefold: 1 To generate data to be used with finite element computer modeling efforts, 2 To study the crashworthiness features typically associated with a small representative helicopter, and 3 To compare aircraft response to data collected from a previously conducted MD-500 crash test, which included an externally deployable energy absorbing (DEA) concept. Instrumentation on the airframe included accelerometers on various structural components of the airframe; and strain gages on keel beams, skid gear and portions of the skin. Three Anthropomorphic Test Devices and a specialized Human Surrogate Torso Model were also onboard to collect occupant loads for evaluation with common injury risk criteria. This paper presents background and results from this crash test conducted without the DEA concept. These results showed accelerations of approximately 30 to 50 g on the airframe at various locations, little energy attenuation through the airframe, and moderate to high probability of occupant injury for a variety of injury criteria.

Littell, Justin↗

Plasticity and Failure in Nanocrystalline BCC Metals via MD Simulation

Advances in the ability to generate extremely high pressures in dynamic experiments such as at the National Ignition Facility has motivated the need for special materials optimized for those conditions as well as ways to probe the response of these materials as they are deformed. We need to develop a much deeper understanding of the behavior of materials subjected to high pressure, especially the effect of rate at the extremely high rates encountered in those experiments. Here we use large-scale molecular dynamics (MD) simulations of the high-rate deformation of nanocrystalline tantalum at pressures less than 100 GPa to investigate the processes associated with plastic deformation for strains up to 100%. We focus on 3D polycrystalline systems with typical grain sizes of 10-20 nm. We also study a rapidly quenched liquid (amorphous solid) tantalum. We apply a constant volume (isochoric), constant temperature (isothermal) shear deformation over a range of strain rates, and compute the resulting stress-strain curves to large strains for both uniaxial and biaxial compression. We study the rate dependence and identify plastic deformation mechanisms. The identification of the mechanisms is facilitated through a novel technique that computes the local grain orientation, returning it as a quaternion for each atom. This analysis technique is robust and fast, and has been used to compute the orientations on the fly during our parallel MD simulations on supercomputers. We find both dislocation and twinning processes are important, and they interact in the weak strain hardening in these extremely fine-grained microstructures. We also present some results on void growth in nanocrystalline BCC metals under tension.

36 MATERIALS SCIENCE↗

Fluorescence of PRODAN in Water: a Computational QM/MM MD Study

Fluorescent properties of PRODAN (6-propionyl-2-dimethylaminonaphthalene) in water were studied by means of excited state molecular dynamics simulations employing a combined quantum mechanical and molecular mechanical approach with the time-dependent density functional theory (TD-DFT QM/MM MD). The state of the art coupled cluster method was used to benchmark density functional theory calculations. The influence of the water environment on PRODAN emission was investigated by employing several computational schemes with varying description of the solvent. The issue of the molecular geometry of the excited state PRODAN molecule in water was addressed. The experimental emission spectrum was reproduced for the planar excited state conformer of PRODAN in the extended environment of 300 explicit water molecules. The planar conformer was shown to be predominantly responsible for fluorescence. The twisted isomer is strongly stabilized in water, but rapidly evolve towards a conical intersection, and hence the twisted conformer is fluorescently inactive.

calculations↗

High-precision α -particle energies in the decay of Es, Fm, and Md Isotopes

Energies of α particles in the decay of heavy Es, Fm and Md isotopes were reevaluated by analyzing previously published and unpublished data. The α-particle spectra were measured in 1970s at the Argonne National Laboratory with a magnetic spectrometer and with silicon detectors using very thin, mass-separated sources. The new values for the α-particle energies were determined with respect to the precise values of 6632.51±0.05 keV for the 253 Es α0 group and 6118.10±0.04 keV for the 252 Cf α0 group, as well as those of 7040.0±1.0 keV and 7022.0±0.5 keV for the 252 Fm α0 and 255 Fm α106 groups, respectively, evaluated in the present work. Furthermore, the deduced uncertainties in the α-particle energies were reduced compared to earlier measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Unraveling the dynamics and structure of functionalized self-assembled monolayers on gold using 2D IR spectroscopy and MD simulations

Significance Self-assembled monolayers (SAMs) are a form of nanotechnology that enables the functionalization of surfaces with single layers of chemically designed structures having tuned properties. In contrast to the characterization of time-average static structures, it is challenging to measure the dynamic behavior of SAMs on the timescales of molecular motions, i.e. picoseconds. Here we combine 2D IR spectroscopy and molecular dynamics (MD) simulations to investigate alkyl chain monolayers functionalized with a head group. The dynamics reported by the head group are induced by the alkyl chain motions. For example, it was determined that SAMs with higher alkyl chain gauche defect content have faster dynamics caused by more frequent chain conformational fluctuations.

2D IR spectroscopy↗

Machine Learning‐Augmented Molecular Dynamics Simulations (MD) Reveal Insights Into the Disconnect Between Affinity and Activation of ZTP Riboswitch Ligands

Abstract The challenge of targeting RNA with small molecules necessitates a better understanding of RNA–ligand interaction mechanisms. However, the dynamic nature of nucleic acids, their ligand‐induced stabilization, and how conformational changes influence gene expression pose significant difficulties for experimental investigation. This work employs a combination of computational and experimental methods to address these challenges. By integrating structure‐informed design, crystallography, and machine learning‐augmented all‐atom molecular dynamics simulations (MD), we synthesized, biophysically and biochemically characterized, and studied the dissociation of a library of small molecule activators of the 5‐aminoimidazole–4–carboxamide ribonucleotide triphosphate (ZTP) riboswitch, a ligand‐binding RNA motif that regulates bacterial gene expression. We uncovered key interaction mechanisms, revealing valuable insights into the role of ligand binding kinetics on riboswitch activation. Further, we established that ligand on‐rates determine activation potency as opposed to binding affinity and elucidated RNA structural differences, which provide mechanistic insights into the interplay of RNA structure on riboswitch activation.

Chemistry↗