SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The fundamental theorem of magnetostatic equilibrium predicts that the bipolar magnetic fields of active regions on the sun contain tangential discontinuities as an intrinsic part of their equilibrium. It appears that rapid reconnection at these many tangential discontinuities (nanoflares) is the primary source of heat that produces the X-ray emitting corona. The X-ray corona is then a cloud of nanoflares.
It is presently shown that a simple sunspot model with azimuthal variations in inclination, but lacking azimuthal field-strength variations, is free from azimuthal Lorentz forces. The meridional currents arising from the inclination variations are parallel to the field lines, suggesting that a cylindrically symmetric magnetostatic sunspot model can be perturbed into one with azimuthal variations in inclination with adjustment of the meridional force balance.
This paper describes the field-mapping technique, the numerical modeling and the compensation approach used for the RTGs with the goal of minimizing its magnetic field interference with Cassini's DC magnetic field science instruments.
Electromagnetic (EM) accelerators have the potential to fill a performance range not currently being met by conventional chemical and electric propulsion systems by providing a specific impulse of 600-1000 seconds and a thrust-to-power ratio greater than 200 mN/kW. A propulsion system based on EM acceleration of small projectiles has the traditional advantages of using a pulsed system, including precise control over a range of thrust and power levels as well as rapid response and repetition rates. Furthermore, EM accelerators have lower power requirements than conventional electric propulsion systems since no plasma creation is necessary. A coilgun is a specific type of EM device where a high-current pulse through a coil of wire interacts with a conductive projectile via an induced magnetic field to accelerate the projectile. There are no physical or electrical connections to the projectile, which leads to less system degradation and a longer life expectancy. Multi-staging a coilgun by adding multiple turns on a single coil or on the projectile increases the inductance, thus permitting acceleration of the projectile to higher velocities. Previously, a simplified problem of modeling an inductively-coupled, single-coil coilgun using a circuit-based analysis coupled to the one-dimensional momentum equation through Lenz's law was solved; however, the analysis was only conducted on uncoupled coils. The problem is significantly more complicated when multiple, independently-powered coils simultaneously operate and interact with each other and the projectile through induced magnetic fields. This paper presents a multi-coil model developed with the magnetostatic finite element solver QuickField. In the model, mutual inductance values between pairs of conductors were found by first computing the magnetic field energy for different cases where individual coils or multiple coils carry current, then integrating over the entire finite element domain for each case, and finally using the definition of inductive energy storage to solve for the self and mutual inductance. The electric circuit model is coupled to the projectile through Lenz's law, with the coils coupled through mutual inductance but able to be independently triggered at different times to optimize the acceleration profile. This initial model to predict the behavior of a projectile's acceleration through a coupled, multi-coil coilgun increases the potential of building a highly efficient coilgun thruster with key advantages over other EM thruster systems, thus making it a promising candidate for satellite main propulsion or attitude control thrusters.
Scaling laws for resonance line formation are used to obtain approximate excitation and ionization equilibria for a three-level model of singly ionized calcium. The method has been developed for and is applied to the study of magnetograph response in the 8542 A infrared triplet line to magnetostatic canopies which schematically model diffuse, nearly horizontal fields in the low solar chromosphere. For this application, the method is shown to be efficient and semi-quantitative, and the results indicate the type and range of effects on calcium-line radiation which result from reduced gas pressure inside the magnetic regions.
Two interactive computer graphics postprocessors, MAGGRAF and NASTEK, used for displaying NASTRAN-generated results are described. MAGGRAF is capable of displaying magnetic potentials or fields computed from results generated by a NASTRAN magnetostatic analysis. NASTEK is capable of displaying NASTRAN-generated PLT2 files on most Tektronic terminals. Examples of the plotting capabilities for each of the programs will be presented including plots of drawn with solid and dotted lines.
We have observed the disk passage of relatively simple round sunspots using a narrowband filter and a large format CCD detector and have created magnetograms, Dopplergrams, and continuum images nearly simultaneously. In addition the spectral resolution of the filter allows the construction of 'spectra' for all points in the field of view. The mean inclination of the magnetic field increases from 45-50 deg to 70-75 deg across the penumbra and there is a fluctuation of the inclination angle about the mean of about 4 +/- 18 deg. The variation in inclination is large enough that substantial amounts of magnetic field are parallel to the solar surface from the mid to outer penumbra. The Evershed flow tends to occur in the regions where the magnetic field is horizontal. This suggests that the Evershed flow is confined to the regions of horizontal fields. We show that a simple sunspot model with azimuthal variations in inclination but no azimuthal variations of field strength is free from azimuthal Lorentz forces. The meridional component of the currents which arise from the azimuthal variation in inclination are parallel to the field lines. This suggests that a cylindrically symmetric magnetostatic sunspot model can be perturbed into one with azimuthal variations in inclination with some adjustment in the meridional force balance.
Solutions of the sine-Poisson equations are used to construct a class of isothermal magnetostatic atmospheres, with one ignorable coordinate corresponding to a uniform gravitational field in a plane geometry. The distributed current in the model (j) is directed along the x-axis, where x is the horizontal ignorable coordinate; (j) varies as the sine of the magnetostatic potential and falls off exponentially with distance vertical to the base with an e-folding distance equal to the gravitational scale height. Solutions for the magnetostatic potential A corresponding to the one-soliton, two-soliton, and breather solutions of the sine-Gordon equation are studied. Depending on the values of the free parameters in the soliton solutions, horizontally periodic magnetostatic structures are obtained possessing either a single X-type neutral point, multiple neural X-points, or solutions without X-points.
The paper presents a family of isothermal magnetostatic atmospheres with one ignorable coordinate corresponding to a uniform gravitational field in a plane geometry. The distributed current in the model J is directed along the x-axis, where x is the horizontal ignorable coordinate. The current J is taken to be proportional to the cube of the magnetostatic potential A and falls off exponentially with distance vertical to the base with an e-folding distance equal to the gravitational scale height. A range of similarity solution examples are displayed depending on the values of the similarity parameters. Each similarity parameter corresponds to a symmetry of the underlying nonlinear elliptic equation for A. The similarity parameters also determine the source currents for the potential field solution of the family. The solutions show the interplay between the gravitational force, the J & B force (B, magnetic field induction) and the gas pressure gradient.
It is pointed out that plasma confinement in stable equilibrium states constitutes a fundamental and still unresolved question in plasma astrophysics and thermonuclear fusion research. The problem has two parts related to the equilibrium states themselves and their mechanical stability. The question of the existence of general solutions of the field and fluid equations for the steady dynamical interaction of inviscid compressible fluids of high electrical conductivity with magnetic and gravity fields is considered. In the absence of fluid motions, the presented equations become the familiar equations of magnetostatics supplemented by an equation of state. Starting from this simplest case of magnetostatic equilibrium, the investigation proceeds to the more complex case of magnetohydrodynamic equilibrium. Examples of helically symmetric fields are presented to illustrate the use of the formulation for treating the dynamics of helically symmetric hydromagnetic flows.
The magnetohydrodynamic (MHD) flow of plasma through a magnetic nozzle is simulated by solving the governing equations for the plasma flow in the presence of an static magnetic field representing the applied nozzle. This work will numerically investigate the flow and behavior of the plasma as the inlet plasma conditions and magnetic nozzle field strength are varied. The MHD simulations are useful for addressing issues such as plasma detachment and to can be used to gain insight into the physical processes present in plasma flows found in thrusters that use magnetic nozzles. In the model, the MHD equations for a plasma, with separate temperatures calculated for the electrons and ions, are integrated over a finite cell volume with flux through each face computed for each of the conserved variables (mass, momentum, magnetic flux, energy) [1]. Stokes theorem is used to convert the area integrals over the faces of each cell into line integrals around the boundaries of each face. The state of the plasma is described using models of the ionization level, ratio of specific heats, thermal conductivity, and plasma resistivity. Anisotropies in current conduction due to Hall effect are included, and the system is closed using a real-gas equation of state to describe the relationship between the plasma density, temperature, and pressure.A separate magnetostatic solver is used to calculate the applied magnetic field, which is assumed constant for these calculations. The total magnetic field is obtained through superposition of the solution for the applied magnetic field and the self-consistently computed induced magnetic fields that arise as the flowing plasma reacts to the presence of the applied field. A solution for the applied magnetic field is represented in Fig. 1 (from Ref. [2]), exhibiting the classic converging-diverging field pattern. Previous research was able to demonstrate effects such as back-emf at a super-Alfvenic flow, which significantly alters the shape of the magnetic field in both the near- and far-field regions. However, in that work the downstream domain was constrained to a channel of constant cross-sectional area. In the present work we seek to address this issue by modeling the downstream region with a domain that permits free expansion of the plasma, permitting a better evaluation of the downstream effects the applied field has on the plasma. The inlet boundary conditions and applied magnetic field values will also be varied to determine the effect the initial plasma energy content and applied magnetic field energy density have on the near- and far-field plasma properties on the MHD code. This will determine the effect of inlet boundary conditions on the results downstream and address issues related to the restrictive numerical domain previously used.
A multidimensional numerical simulation framework aimed at investigating the process of plasma detachment from a magnetic nozzle is introduced. An existing numerical code based on a magnetohydrodynamic formulation of the plasma flow equations that accounts for various dispersive and dissipative processes in plasmas was significantly enhanced to allow for the modeling of axisymmetric domains containing three.dimensiunai momentum and magnetic flux vectors. A separate magnetostatic solver was used to simulate the applied magnetic field topologies found in various nozzle experiments. Numerical results from a magnetic diffusion test problem in which all three components of the magnetic field were present exhibit excellent quantitative agreement with the analytical solution, and the lack of numerical instabilities due to fluctuations in the value of del(raised dot)B indicate that the conservative MHD framework with dissipative effects is well-suited for multi-dimensional analysis of magnetic nozzles. Further studies will focus on modeling literature experiments both for the purpose of code validation and to extract physical insight regarding the mechanisms driving detachment.
Echo mode in YIG rods has different behavior in magnetic fields. This mode, discovered at 8.5 gigahertz, experiences a linear variation. The time delay exhibited is a linear function of the applied magnetic field and the input pulse frequency.
This paper presents an analytic model for a finite-size straight filament suspended horizontally in a steady state over a bipolar magnetic region. The equations of magnetostatic equilibrium are integrated exactly. The solution obtained illustrates the roles played by the electric current, magnetic field, pressure, and plasma weight in the balance of force everywhere in space. A specific example of a filament of diameter 50,000 km, with a density two orders of magnitude over the corona and supported by a magnetic field of about 4 gauss is included. The filament temperature can take values ranging from a small fraction to a few times the coronal temperature, depending on the internal electric current of the filament. To produce a cool filament, such as the quiescent prominence, the solution is required to have an internal field with a strong component along the filament, giving rise to helical structures. A hot filament such as the X-ray coronal loop can be produced as a twisted magnetic flux tube embedded in a strong background field aligned parallel to the filament and having lower density and temperature. The basic steps of construction can be used to develop models more realistic than the ones presented for their analytic simplicity.
The stability of a class of isothermal magnetostatic atmospheres with one ignorable coordinate corresponding to a uniform gravitational field in a plane geometry is explored. Special attention is given to the stability of nonpotential equilibria that have the same magnetic field geometry as the potential equilibrium of the solution family. It is found that equilibria in which the source currents for the potential field are buried at large distances below the photospheric base are stable. Also considered is the stability of configurations in which the source currents for the potential field are located at a finite depth below the base.
The Department of Energy, the Stirling Technology Company (STC), and the NASA Glenn Research Center are developing Stirling convertors for Stirling radioisotope generators to provide electrical power for future NASA deep space missions. STC is developing the 55-We technology demonstration convertor (TDC) under contract to the Department of Energy. The Department of Energy recently named Lockheed Martin as the system integration contractor for the Stirling radioisotope generator development project. Lockheed Martin will develop the Stirling radioisotope generator engineering unit and has contract options to develop the qualification unit and the first flight unit. Glenn s role includes an in-house project to provide convertor, component, and materials testing and evaluation in support of the overall power system development. As a part of this work, Glenn has established an in-house Stirling research laboratory for testing, analyzing, and evaluating Stirling machines. STC has built four 55-We convertors for NASA, and these are being tested at Glenn. A cross-sectional view of the 55-We TDC is shown in the figure. Of critical importance to the successful development of the Stirling convertor for space power applications is the development of a lightweight and highly efficient linear alternator. In support, Glenn has been developing finite element analysis and finite element method tools for performing various linear alternator thermal and electromagnetic analyses and evaluating design configurations. A three-dimensional magnetostatic finite element model of STC's 55-We TDC linear alternator was developed to evaluate the demagnetization fields affecting the alternator magnets. Since the actual linear alternator hardware is symmetric to the quarter section about the axis of motion, only a quarter section of the alternator was modeled. The components modeled included the mover laminations, the neodymium-iron-boron magnets, the stator laminations, and the copper coils. The three-dimensional magnetostatic model was then coupled with a circuit simulator model of the alternator load and convertor controller. The coupled model was then used to generate alternator terminal voltage and current predictions. The predicted voltage and current waveforms agreed well with the experimental data, which tended to validate the accuracy of the coupled model. The model was then used to generate predictions of the demagnetization fields acting on the alternator magnets for the alternator under load. The preliminary model predictions indicate that the highest potential for demagnetization is along the inside surface of the uncovered magnets. The demagnetization field for the uncovered magnets when the mover is positioned at the end of a stroke is higher than it is when the mover is at the position of maximum induced voltage or maximum alternator current. Assuming normal load conditions, the model predicted that the onset of demagnetization is most likely to occur for magnet temperatures above 101 C.
The theory of energetic particle scattering by magnetostatic fluctuations is reviewed in so far as it fails to produce the rigidity-independent mean-free-paths observed. Basic aspects of interplanetary magnetic field fluctuations are reviewed with emphasis placed on the existence of dissipation range spectra at high wavenumbers. These spectra are then incorporated into existing theories for resonant magnetostatic scattering and are shown to yield infinite mean-free-paths. Nonresonant scattering in the form of magnetic mirroring is examined and offered as a partial solution to the magnetostatic problem. In the process, mean-free-paths are obtained in good agreement with observations in the interplanetary medium at 1 AU and upstream of planetary bow shocks.
Exact analytic solutions for the static equilibrium of a gravitating plasma polytrope in the presence of magnetic fields are presented. The means of generating various equilibrium configurations to illustrate directly the complex physical relationships between pressure, magnetic fields, and gravity in self-gravitating systems is demonstrated. One of the solutions is used to model interstellar clouds suspended by magnetic fields against the galactic gravity such as may be formed by the Parker (1966) instability. It is concluded that the pinching effect of closed loops of magnetic fields in the clouds may be a dominant agent in further collapsing the clouds following their formation.