Engineering PapersSearch

SEARCH · Engineering Papers

Results for “MAGNETIC PUMPING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Flat Spectra of Energetic Particles in Interplanetary Shock Precursors

The observed energy spectra of accelerated particles at interplanetary shocks often do not match the diffusive shock acceleration (DSA) theory predictions. In some cases, the particle flux forms a plateau over a wide range of energies, extending upstream of the shock for up to seven flux e-folds before submerging into the background spectrum. Remarkably, at and downstream of the shock we have studied in detail, the flux falls off in energy as ϵ -1 , consistent with the DSA prediction for a strong shock. The upstream plateau suggests a particle transport mechanism different from those traditionally employed in DSA models. We show that a standard (linear) DSA solution based on a widely accepted diffusive particle transport with an underlying resonant wave–particle interaction is inconsistent with the plateau in the particle flux. To resolve this contradiction, we modify the DSA theory in two ways. First, we include a dependence of the particle diffusivity κ on the particle flux F (nonlinear particle transport). Second, we invoke short-scale magnetic perturbations that are self-consistently generated by, but not resonant with, accelerated particles. They lead to the particle diffusivity increasing with the particle energy as ∝ϵ 3/2 that simultaneously decreases with the particle flux as 1/F. The combination of these two trends results in the flat spectrum upstream. We speculate that nonmonotonic spatial variations of the upstream spectrum, apart from being time-dependent, may also result from non-DSA acceleration mechanisms at work upstream, such as stochastic Fermi or magnetic pumping acceleration.

79 ASTRONOMY AND ASTROPHYSICS

Energy Partition in Collisionless Counterstreaming Plasmas

Fast, counterstreaming plasma outflows drive magnetic field amplification, plasma heating, and particle acceleration in numerous astrophysical environments, from supernova remnant shocks to active galactic nuclei jets. Understanding how, in the absence of Coulomb collisions, energy is redistributed between the different plasma species remains a fundamental open question. We use three-dimensional, fully kinetic simulations to investigate energy partition in weakly magnetized counterpropagating plasmas. Our results reveal a complex interplay between different processes, where at early times the Weibel instability drives a first stage of magnetic field amplification and at late times the kinking of current filaments drives a second amplification stage via a dynamo-type mechanism. Electrons are heated primarily during the latter phase through magnetic pumping. By the time the flows thermalize, we observe that the final temperature ratio T e /T i and energy partition depend on the ion-to-electron mass ratio. For electron–proton flows, the electron thermal energy only reaches up to a few percent of the initial ion kinetic energy.

Marret, Alexis [SLAC National Accelerator Laborato

Mechanism for the X-ray pulsations in Cyg X-1.

The mechanism proposed involves the occurrence of a flare in a region of high magnetic field on the surface of a star. The flare produces oscillations in the magnetic field structure. The oscillations lead to heating of the plasma in a flux tube which emits thermal radiation. The heating may be caused by magnetic pumping or particles accelerated in periodic bursts by the flare. Synchrotron radiation from high energy particles accounts for the hard X-ray emission.

Blumenthal, G. R.

The electron diffusion coefficient in Jupiter's magnetosphere

A steady-state model of Jupiter's electron radiation belt is developed. The model includes injection from the solar wind, radial diffusion, energy degradation by synchrotron radiation, and absorption at Jupiter's surface. A diffusion coefficient of the form D sub RR/R sub J squared = k times R to the m-th power is assumed, and then observed data on synchrotron radiation are used to fit the model. The free parameters determined from this fit are m = 1.95 plus or minus 0.5, k = 1.7 plus or minus 0.5 x 10 to the 9th power per sec, and the magnetic moment of injected particles equals 770 plus or minus 300 MeV/G. The value of m shows quite clearly that the diffusion is not caused by magnetic pumping by a variable solar wind or by a fluctuating convection electric field. The process might be field line exchange driven by atmospheric-ionospheric winds; our diffusion coefficient has roughly the same radial dependence but is considerably smaller in magnitude than the upper bound diffusion coefficients recently suggested for this process by Brice and McDonough (1973) and Jacques and Davis (1972).

Birmingham, T.

A unified theory of electrodynamic coupling in coronal magnetic loops - The coronal heating problem

The coronal heating problem is studied, and it is demonstrated that Ionson's (1982) LRC approach results in a unified theory of coronal heating which unveils a variety of new heating mechanisms and which links together previously proposed mechanisms. Ionson's LRC equation is rederived, focusing on various aspects that were not clarified in the original article and incorporating new processes that were neglected. A parameterized heating rate is obtained. It is shown that Alfvenic surface wave heating, stochastic magnetic pumping, resonant electrodynamic heating, and dynamical dissipation emerge as special cases of a much more general formalism. This generalized theory is applied to solar coronal loops and it is found that active region and large scale loops are underdamped systems. Young active region loops and (possibly) bright points are found to be overdamped systems.

Ionson, J. A.

Jovian magnetospheric processes

Jupiter's rotational energy (6 x 10 to the 34th J) powers a large number of processes such as auroral UV emission, radio waves, and charged particle energization. How the rotational energy may be dissipated by injection of plasma, magnetic pumping and field aligned electric fields is described. In addition, energization by radial diffusion and plasma wave absorption is described. The generation of Alfven waves by the moon Io, and their relation to the emission of the Jovian decametric (DAM) radio waves are also described.

Goertz, C. K.

Sources and acceleration of energetic particles in planetary magnetospheres

Energetic particles in the magnetospheres of the solar system originate from various different sources, such as the solar wind, the planetary ionospheres as well as the moons and rings of the planetary systems. Important acceleration sites are the auroral regions, the magnetotail, and the equatorial regions of the magnetospheres where electric fields, wave-particle interactions, and magnetic pumping are among the major acceleration mechanisms proposed. Over the last decade mass- and charge-sensitive particle spectrometers on satellites and space probes have collected a wealth of information about the relative contribution of the various particle sources and the major acceleration processes to the energetic particle populations. Emphasis will be put on recent studies of the source populations and the acceleration processes in the Earth's auroral zones and magnetotail. Furthermore, the Jovian system with the largest magnetosphere and its unique mixture of particle sources with strong contributions from moons will be highlighted in some results from Ulysses.

Moebius, Eberhard

Active magnetic bearings: As applied to centrifugal pumps

Application of magnetic bearings to boiler feed pumps presents various attractive features, such as longer bearing life, lower maintenance costs, and improved operability through control of the rotordynamics. Magnetic bearings were fitted to an eight-stage, 600 hp boiler feed pump, which generates 2600 ft of heat at 680 gpm and 3560 rpm. In addition to the varied and severe operating environment in steady state operation of this pump in a power plant, it is also subjected to transient loads during frequent starts and stops. These loads can now be measured by the in-built instrumentation of the magnetic bearings. Following site installation, a follow-up bearing tune-up was performed, and pump transient response testing was conducted. The bearing response was completely satisfactory, ensuring trouble-free pump operation even in the range of reduced load. The experience gained so far through design and testing proves feasibility of magnetic bearings for boiler feed pumps, which sets the stage for application of even higher energy centrifugal pumps equipped with magnetic bearings.

Lev Nelik

Self-assembled reconfigurable pump architectures via magnetic colloidal swarms

Self-assembled swarms of interactive active units, which are adaptive and dynamically reconfigurable to accommodate different functionalities, represent a promising platform for the development of next-generation robotics. Here, we utilize the emergent collective behavior of active magnetic colloids confined in quasi-two-dimensional arrays of overlapping wells to demonstrate the self-organization of a colloidal swarm into a dynamic pump architecture capable of controlled transport of passive cargo particles. This dynamic architecture provides a global unidirectional looping flow pattern along the entire length of the system. We show that the flow direction of the dynamic swarm-based pump can be externally controlled by a phase shift of a driving magnetic field energizing the swarm. The experimental observations are supported by computational modeling based on phenomenological coarse-grained particle dynamics coupled to shallow-water Navier-Stokes hydrodynamics. In conclusion, our findings demonstrate how the emergent collective behavior of a swarm can be orchestrated into a desired functionality by exploiting the interplay between activity and confinement potentials.

36 MATERIALS SCIENCE

Magnetically suspended miniature fluid pump and method of designing the same

A rotary pump for pumping fluids through a patient having a housing with an internal region, a stator member and an impeller positioned within the housing and having impeller blades, wherein the impeller is magnetically suspended and rotated, and wherein the geometric configuration of the rotary pump is sized and proportioned to minimize stagnant and traumatic fluid flow within the rotary pump. The plurality of magnetic impeller blades are preferably rare earth, high-energy-density magnets selected from the group consisting of samarium cobalt and neodymium-iron-boron alloy.

Antaki, James F.

Magnetic Bearings Would Increase Pump Efficiency

Active feedback applied to bearings windings compensate for unbalanced forces. Helical-screw rotation compresses and transports gas charges, which subject shafts to forces tend to displace them from their equilibrium positions. Magnetic bearings restore shafts to equilibrium, lowering friction and increasing efficiency.

Studer, P. A.

Paramagnetic-Salt Thermometer With Flux Pump And SQUID's

Paramagnetic-salt low-temperature thermometer incorporates improved superconducting magnetic-flux pump, multiple superconducting quantum interference devices as magnetometers, and feedback stabilization of magnetic flux. Requires much smaller initial magnetizing currents and provides improved temperature resolution via suppression of drift in magnetic induction.

Strayer, Donald M.

Mass spectrometer with magnetic pole pieces providing the magnetic fields for both the magnetic sector and an ion-type vacuum pump

A mass spectrometer (MS) with unique magnetic pole pieces which provide a homogenous magnetic field across the gap of the MS magnetic sector as well as the magnetic field across an ion-type vacuum pump is disclosed. The pole pieces form the top and bottom sides of a housing. The housing is positioned so that portions of the pole pieces form part of the magnetic sector with the space between them defining the gap region of the magnetic sector, through which an ion beam passes. The pole pieces extend beyond the magnetic sector with the space between them being large enough to accommodate the electrical parts of an ion-type vacuum pump. The pole pieces which provide the magnetic field for the pump, together with the housing form the vacuum pump enclosure or housing.

Sieradski, L. M.

Optically exciting a magnetic memory - A feasibility study

Rare earth iron garnets were used in experiments to determine the feasibility of optically pumping a magnetic material to effect the switching process. It was found that rare earth garnets are limited by an absorption edge, only terbium and dysprosium offer a possibility of pumping at energies below the conduction band edge.

Grismore, F. L.

Stirring and peristaltic pumping alter flow electrode particle size and morphology

Flowable carbon-based electrodes are widely studied in electrochemical systems for energy storage and water treatment. Most laboratory- and pilot-scale studies employ active mixing for slurry preparation and handling and use peristaltic pumps for slurry circulation. Magnetic stirring is the most prevalent mixing method at the laboratory scale, and the combination of magnetic mixing and peristaltic pumping is favored for convenience and compatibility with particulate suspensions. However, these methods can strongly affect particle size and morphology (and therefore cell performance). In this study, we evaluate how mixing and pumping influence particle degradation in two commonly used carbon materials: spherical carbon black (CB) beads and powdered activated carbon (AC). We performed 24 h stirring-only experiments using magnetic, orbital, and overhead stirring. Separately, we conducted 32 h circulation experiments using a commercial peristaltic pump. Particle morphology and size were analyzed using optical microscopy and laser diffraction. The initially spherical CB beads (~580 μm, 1.5 wt%) exhibit rapid and extensive breakdown under both peristaltic pumping and magnetic stirring. By comparison, AC particles (initially ~31 μm) tested at 1.5 and 15 wt% showed measurable size reductions of up to ~25 % under either stirring or pumping. In conclusion, these findings highlight the need to account for and quantify morphological changes caused by both stirring and pumping in the design and associated evaluation of flowable electrode systems.

Chemistry

Pumping Liquid Oxygen by Use of Pulsed Magnetic Fields

An effort is underway to develop a method of pumping small amounts of liquid oxygen by use of pulsed magnetic fields. This development is motivated by a desire to reduce corrosion and hazards of explosion and combustion by eliminating all moving pump parts in contact with the pumped oxygen. The method exploits the known paramagnetism of liquid oxygen. Since they both behave similarly, the existing theory of ferrofluids (liquids with colloidally suspended magnetic particles) is directly applicable to paramagnetic liquid oxygen. In general, the force density of the paramagnetic interaction is proportional to the magnetic susceptibility multiplied by the gradient of the square of the magnitude of the magnetic field. The local force is in the direction of intensifying magnetic field. In the case of liquid oxygen, the magnetic susceptibility is large enough that a strong magnetic-field gradient can lift the liquid in normal Earth gravitation.

Youngquist, Robert