Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM OXIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Glancing-angle-deposited magnesium oxide films for high-fluence applications

Here, Birefringent magnesium oxide thin films are formed by glancing angle deposition to perform as quarter-wave plates at a wavelength of 351 nm. These films are being developed to fabricate a large aperture distributed-polarization rotator for use in vacuum, with an ultimate laser-damage–threshold goal of up to 12 J/cm 2 for a 5-ns flat-in-time pulse. The laser-damage threshold, ease of deposition, and optical film properties are evaluated. While the measured large-area laser-damage threshold is limited to ~4 J/cm 2 in vacuum, initial results based on small-spot testing in air (>20 J/cm 2 ) suggest MgO may be suitable with further process development.

36 MATERIALS SCIENCE↗

Ab initio calculations on magnetism induced by composite defects in magnesium oxide

The local magnetic state induced by the composite defects, composed of an oxygen vacancy and a nitrogen substituting oxygen, in magnesium oxide has been studied by using ab initio calculation based on density functional theory. The calculated results show that local magnetic moment can be induced by the composite defects around the oxygen vacancy, when the exchange split of the oxygen vacancy is enhanced either by the hybridization between the N-p and nearest neighbor O-p orbitals or by applying on-site Coulomb repulsion (U) and exchange interaction (J). We show that the magnetic state induced by the composite defect is energetically more stable than the non-magnetic state. In addition, we show that the U and J applied on the p-orbitals of N and O atoms may significantly impact the calculated magnetic state of the composite defect, resulting in magnetic state for a configuration that is non-magnetic by generalized gradient approximation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnesium oxide nanoparticles on green activated carbon as efficient CO{sub 2} adsorbent

This study was focused on carbon dioxide (CO{sub 2}) adsorption ability using Magnesium oxide (MgO) nanoparticles and MgO nanoparticles supported activated carbon based bamboo (BAC). The suitability of MgO as a good CO{sub 2} adsorbent was clarified using Thermodynamic considerations (Gibbs-Helmholtz relationship). The ΔH and ΔG of this reaction were − 117.5 kJ⋅mol{sup −1} and − 65.4 kJ⋅mol{sup −1}, respectively, at standard condition (298 K and 1 atm). The complete characterization of these adsorbent were conducted by using BET, XRD, FTIR, TEM and TPD−CO{sub 2}. The surface areas for MgO nanoparticles and MgO nanoparticles supported BAC were 297.1 m{sup 2}/g and 702.5 m{sup 2}/g, respectively. The MgO nanoparticles supported BAC shown better physical and chemical adsorption ability with 39.8 cm{sup 3}/g and 6.5 mmol/g, respectively. The combination of MgO nanoparticle and BAC which previously prepared by chemical method can reduce CO{sub 2} emissions as well as better CO{sub 2} adsorption behavior. Overall, our results indicate that nanoparticles of MgO on BAC posses unique surface chemistry and their high surface reactivity coupled with high surface area allowed them to approach the goal as an efficient CO{sub 2} adsorbent.

36 MATERIALS SCIENCE↗

Optimization of ion assist beam deposition of magnesium oxide template films during initial nucleation and growth

Recent efforts in investigating the mechanism of ion beam assisted deposition (IBAD) of biaxially textured thin films of magnesium oxide (MgO) template layers have shown that the texture develops suddenly during the initial 2 nm of deposition. To help understand and tune the behavior during this initial stage, we pre-deposited thin layers of MgO with no ion assist prior to IBAD growth of MgO. We found that biaxial texture develops for pre-deposited thicknesses < 2 nm, and that the thinnest layer tested, at 1 nm, resulted in the best qualitative RHEED image, indicative of good biaxial texture development. The texture developed during IBAD growth on the 1.5 nm pre-deposited layer is slightly worse and IBAD growth on the 2 nm pre-deposited layer produces a fiber texture. Application of these layers on an Al{sub 2}O{sub 3} starting surface, which has been shown to impede texture development, improves the overall quality of the IBAD MgO and has some of the characteristics of a biaxially texture RHEED pattern. It is suggested that the use of thin (<2 nm) pre-deposited layers may eliminate the need for bed layers like Si{sub 3}N{sub 4} and Y{sub 2}O{sub 3} that are currently thought to be required for proper biaxial texture development in IBAD MgO.

36 MATERIALS SCIENCE↗

Detection of the adsorption of water monolayers through the ion oscillation frequency in the magnesium oxide lattice by means of low energy electron diffraction

We investigate the variation of the oscillation frequency of the Mg{sup 2+} and O{sup 2−} ions in the magnesium oxide lattice due to the interactions of the surface with water monolayers by means of Low Energy Electron Diffraction. Our key result is a new technique to determine the adsorbate vibrations produced by the water monolayers on the surface lattice as a consequence of their change in the surface Debye temperature and its chemical shift. The latter was systematically investigated for different annealing times and for a constant external thermal perturbation in the range of 110–300 K in order to accomplish adsorption or desorption of water monolayers in the surface lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-frequency ferromagnetic resonance investigation of nickel nanocubes encapsulated in diamagnetic magnesium oxide matrix

For this, partially aligned nickel nanocubes were grown epitaxially in a diamagnetic magnesium oxide (MgO:Ni) host and studied by a continuous wave ferromagnetic resonance (FMR) spectroscopy at the X-band (9.5 GHz) from ca. 117 to 458 K and then at room temperature for multiple external magnetic fields/resonant frequencies from 9.5 to 330 GHz. In contrast to conventional magnetic susceptibility studies that provided data on the bulk magnetization, the FMR spectra revealed the presence of three different types of magnetic Ni nanocubes in the sample. Specifically, three different ferromagnetic resonances were observed in the X-band spectra: a line 1 assigned to large nickel nanocubes, a line 2 corresponding to the nanocubes exhibiting saturated magnetization even at ca. 0.3 T field, and a high field line 3 (g eff ~ 6.2) tentatively assigned to small nickel nanocubes likely having their hard magnetization axis aligned along or close to the direction of the external magnetic field. Based on the analysis of FMR data, the latter nanocubes possess an anisotropic internal magnetic field of at least ~1.0 T in magnitude.

36 MATERIALS SCIENCE↗

Melting of magnesium oxide up to two terapascals using double-shock compression

Constraining the melting behavior of magnesium oxide, a major constituent of gaseous and rocky planets, is key to benchmarking their evolutionary models. Using a double-shock technique, we extended the MgO melt curve measurements to 2 TPa; this is twice the pressure achieved by previous melting experiments on any material. A temperature plateau is observed between 1218 and 1950 GPa in the second shock states, which is attributed to latent heat of melting. At 1950 GPa, the measured melting temperature is 17,600 K, 17% lower than recent theoretical predictions. Furthermore, the melting curve is steeper than that of MgSiO 3 , indicating that MgO is likely solid in the interior of Saturn-sized gas giants and extra-solar super-Earth planets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and application of magnesium oxide nanospheres with high surface area

Graphical abstract: Display Omitted Highlights: ► MgO nanospheres with high specific surface area synthesized by the polyol method. ► The BET specific surface area of nanopowders was 102 m{sup 2}/g by calcining at ∼250 °C. ► MgO nanospheres were applied to remove hexavalent chromium. -- Abstract: Magnesium oxide (MgO) nanospheres with a high specific surface area were synthesized by the polyol method. The BET specific surface area of the nanopowders was ∼90 m{sup 2}/g by adjusting the molar ratio of the precursor, the reaction time, and the washing solution. It was increased to 102 m{sup 2}/g by calcining at ∼250 °C. Scanning electron microscopic and transmission electron microscopic observations showed that the MgO nanospheres composed of highly folded flakes, which were responsible for the observed high surface area. The high BET characteristic of the MgO nanospheres can be applied to sintering of microwave ceramics at a reducing sintering temperature, uniformed grain size distribution, and high bulk density. Finally, their capacity to remove hexavalent chromium was presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved transmittance measurement with a magnesium oxide coated integrating sphere

Simple and convenient technique has been found for extending transmittance measurement capability of conventional magnesium oxide coated integrating sphere system at low (near ultraviolet) wavelengths. Technique can be used to determine effect of contaminants on window materials and can also be used for measurements on thermal control coatings and telescope mirrors.

Bowman, R. L.↗

Synthesis and characterization of methyl esters from non-edible plant species yellow oleander oil, using magnesium oxide (MgO) nano-catalyst

Highlights: • Introduction of new non-edible oil source for bioenergy industry. • Nano-particles MgO used as a heterogeneous catalyst. • Maximum conversion yield at optimum level achieved 93.1%. • Fuel properties were matched and found similar to ASTM standards. - Abstract: Synthesis and characterization of methyl esters from non-edible oil sources provide a distinctive and sustainable approach towards sustainable energy and the cleaner environment, in general. This study aims the synthesis of methyl esters from non-edible plant species yellow oleander seeds oil. The transesterification process was carried for the synthesis of methyl esters, using heterogeneous nano-catalyst magnesium oxide (MgO). A well known co-precipitation method was used for the synthesis of MgO nano-catalyst. The application of MgO nano-catalyst showed the maximum conversion (93.1%) of triacylglycerols to methyl esters. Different parameters affecting the conversion percentage; alcohol to oil molar ratio, temperature and catalyst concentrations were checked and optimized, accordingly. The optimum conditions for the maximum conversion noted; 1:5 oil to methanol molar ratio at 90 °C, using 0.2% (w/w) MgO nano-catalyst. The various analytical techniques; XRD, SEM-EDX and TEM-EDS spectroscopes were used to check out the nano-particle morphology and crystalline size, accordingly while, the FTIR, GC–MS & NMR were used to quantify and determine the structural measurements of synthesized methyl esters. The fuel properties of oleander methyl esters papered sample were checked, compared and found within accordance to the ASTM standards.

09 BIOMASS FUELS↗