SEARCH · Engineering Papers

Results for “Lifting map”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Aerothermodynamic measurements on a proposed assured crew return vehicle (ACRV) lifting-body configuration at Mach 6 and 10 in air

A 0.02-scale model of a lifting-body concept for possible application to the Assured Crew Return Vehicle from Space Station Freedom was tested at Mach 6 and 10 in air. Thermal mappings and surface streamline patterns were obtained at angles of attack ranging from 0 to 30 deg and unit Reynolds numbers Re from 2 to 8 x 10 to the 6th/ft. Areas that experienced the highest heating were near the model nose and tip-fin leading edges. The effect of Re on windward centerline heating coefficients was negligible, whereas increases in angles of attack produced increases in heating. At Mach 6 and the highest unit Re, turbulent heat at the windward centerline was three to four times the laminar level. Leeward crossflow separation and vortex reattachment along the centerline are evident across the Re and angle-of-attack ranges tested, indicative of a complex flowfield.

Horvath, Thomas J.↗

NASA NTRS1992

Finite wing aerodynamics with simulated glaze ice

The effect of a simulated glaze ice accretion on the aerodynamic performance of a three-dimensional wing is studied experimentally. The model used for these tests was a semi-span wing of effective aspect ratio five, mounted from the sidewall of the UIUC subsonic wind tunnel. The model has an NACA 0012 airfoil section on a rectangular, untwisted planform with interchangeable leading edges to allow for testing both the baseline and the iced wing geometry. A three-component sidewall balance was used to measure lift, drag and pitching moment on the clean and iced model. A four-beam two-color fiberoptic laser Doppler velocimeter (LDV) was used to map the flowfield along several spanwise cuts on the model. Preliminary results from LDV scans, which will be the bulk of this paper, are presented following the force balance measurement results. Initial comparison of LDV surveys compare favorably with inviscid theory results and 2D split hot-film measurements near the model surface.

Khodadoust, A.↗

NASA NTRS2015

Description, Usage, and Validation of the MVL-15 Modified Vortex Lattice Analysis Capability

MVL-15 is the most recent version of the Modified Vortex-Lattice (MVL) code developed within the Aerodynamics Systems Analysis Branch (ASAB) at NASA LaRC. The term "modified" refers to the primary modification of the core vortex-lattice methodology: inclusion of viscous aerodynamics tables that are linked to the linear solution via iterative processes. The inclusion of the viscous aerodynamics inherently converts the MVL-15 from a purely analytic linearized method to a semi-empirical blend which retains the rapid execution speed of the linearized method while empirically characterizing the section aerodynamics at all spanwise lattice points. The modification provides a means to assess non-linear effects on lift that occur at angles of attack near stall, and provides a means to determine the drag associated with the application of design strategies for lift augmentation such as the use of flaps or blowing. The MVL-15 code is applicable to the analyses of aircraft aerodynamics during cruise, but it is most advantageously applied to the analysis of aircraft operating in various high-lift configurations. The MVL methodology has been previously conceived and implemented; the initial concept version was delivered to the ASAB in 2001 (van Dam, C.), subsequently revised (Gelhausen, P. and Ozoroski, T. 2002 / AVID Inc., Gelhausen, P., and Roberts, M. 2004), and then overhauled (Ozoroski, T., Hahn, A. 2008). The latest version, MVL-15 has been refined to provide analysis transparency and enhanced to meet the analysis requirements of the Environmentally Responsible Aviation (ERA) Project. Each revision has been implemented with reasonable success. Separate applications of the methodology are in use, including a similar in-house capability, developed by Olson, E. that is tailored for structural and acoustics analyses. A central premise of the methodology is that viscous aerodynamic data can be associated with analytic inviscid aerodynamic results at each spanwise wing section, thereby providing a pathway to map viscous data to the inviscid results. However, a number of factors can sidetrack the analysis consistency during various stages of this process. For example, it should be expected that the final airplane lift curve and drag polar results depend strongly on the geometry and aerodynamics of the airfoil section; however, flap deflections and flap chord extensions change the local reference geometry of the input airfoil, the airplane wing, the tabulated non-dimensional viscous aerodynamics, and the spanwise links between the linear and the viscous aerodynamics. These changes also affect the bound circulation and therefore, calculation and integration of the induced angle of attack and induced drag. MVL-15 is configured to ensure these types of challenges are properly addressed. This report is a comprehensive manual describing the theory, use, and validation of the MVL-15 analysis tool. Section 3 summarizes theoretical, procedural, and characteristic features of MVL-15, and includes a list of the files required to setup, execute, and summarize an analysis. Section 4, Section 5, Section 6, and Section 7 combine to comprise the User's Guide portions of this report. The MVL-15 input and output files are described in Section 4 and Section 5, respectively; the descriptions are supplemented with example files and information about the file formats, parameter definitions, and typical parameter values. Section 6 describes the Wing Geometry Setup Utility and the 2d-Variants Utility files that simplify and assist setting up a consistent set of MVL-15 geometry and aerodynamics input parameters and input files. Section 7 describes the use of the 3d-Results Presentation Utility file that can be used to automatically create summary tables and charts from the MVL-15 output files. Section 8 documents the Validation Results of an extensive and varied validation test matrix, including results of an airplane analysis representative of the ERA Program. A start-to-finish example of the airplane analysis procedure is described in Section 7.

Ozoroski, Thomas A.↗

NASA NTRS1970

Calculation of incompressible fluid flow through cambered blades

Conformal mapping technique yields linear, approximate solutions for calculating flow of an incompressible fluid through staggered array of cambered blades for the cases of flow with partial cavitation and supercavitation. Lift and drag coefficients, cavitation number, cavity shape, and exit flow conditions can be determined.

Hsu, C. C.↗

NASA NTRS2010

Orion Entry Performance-Based Center-of-Gravity Box

The Orion capsule is designed both for Low Earth Orbit missions to the ISS and for missions to the moon. For ISS class missions, the capsule will use an Apollo-style direct entry. For lunar return missions, depending on the timing of the mission, the capsule could perform a direct entry or a skip entry of up to 4800 n.mi. in order to land in the coastal waters of California. The physics of atmospheric re-entry determine the capability of the Orion vehicle. For a given vehicle mass and shape, physics tells us that the driving parameters for an entry vehicle are the hypersonic lift-to-drag ratio (L/D) and the flight path angle at entry interface (gamma(sub EI)). The design of the Orion atmospheric re-entry must meet constraints during both nominal and dispersed flight conditions on landing accuracy, heating rate, total heat load, sensed acceleration, and proper disposal of the Service Module. These constraints define an entry corridor in the space of L/D-gamma(sub EI); if the vehicle falls within this corridor, then all constraints are met. The gamma(sub EI) dimension of the corridor can be further constrained by the gloads experienced during emergency entries. Thus, the entry performance for the Orion vehicle can be described completely by the L/D. Bounds on the hypersonic L/D necessary to achieve all the mission requirements can be defined for the given entry corridor. Landing accuracy performance drives the lower limit on L/D. In order to achieve the desired landing accuracy, a minimum L/D must be ensured. The design of the Thermal Protection System (TPS) drives the upper limit on L/D. A higher L/D can drive mass into the design of the TPS. Conversely, once the TPS is designed, the L/D must be ensured to stay below a certain limit in order for the TPS to stay within its design envelop. The L/D must stay within its upper and lower bounds during dispersed flight conditions. L/D is a function of both the aerodynamics and the center-of-gravity (CG) of the vehicle. The aerodynamics of the vehicle are determined by Computational Fluid Mechanics (CFD) and wind tunnel tests. However, the aerodynamics are not known precisely. Instead, an aerodynamic database has been developed where the aerodynamic coefficients are known to fall within a probabilistic band defined by upper and lower bounds. It is expected that the probabilistic band will shrink after the first missions are flown and real-world data is collected. Until that time, the Orion must be designed to the current aerodynamic database. Thus, for a given aerodynamic database with given uncertainties, the allowable range in L/D can be mapped to an allowable box for the CG location. The CG box is used to set requirements on the dispersions allowed for vehicle packaging and cargo storage. As the aerodynamic uncertainties decrease, the size of the CG box can increase. This paper discusses the technique used to map the minimum and maximum L/D bounds set by the entry performance requirements to the allowable dispersions in CG while accounting for aerodynamic uncertainties. The L/D is defined as the ratio of the lift force to the drag force. It is equivalent to the ratio of lift coefficient (C(sub L)) over drag coefficient (C(sub D)). C(sub L) and C(sub D) are functions of Mach number (M) and angle of attack (alpha). A Mach number of 25 is used as a measuring point of the hypersonic L/D. Variations in C(sub L), C(sub D) and alpha cause variations in L/D. Equation (1) shows the three contributions to the variation in L/D.

Rea, Jeremy R.↗

NASA NTRS1979

A summary of research on the NASA-Global Atmospheric Sampling Program performed by the Atmospheric Sciences Research Center

The annual variations of ozone near the tropopause are derived from aircraft exhibit year-to-year differences which are not explicitly accounted for by the simple, classical ozone transport theory. Phenomena such as tropopause lifting, interannual variations in the rates of stratospheric-tropospheric exchange and meridional mixing, contribute differently to the distribution of ozone in this altitude region. Ozone encounter climatologies have been represented by global maps which show the probabilities of exceeding ambient ozone levels of 200, 300, and 400 ppbV along flight routes during the year. Continuous ozone records obtained from the GASP system revealed the presence of gravity waves whose wavelength is of the order 20 km. The GASP data cannot, however, be utilized for the evaluation of horizontal fluxes of such quantities as ozone, sensible heat, and zonal momentum; the data are too sparsely and irregularly distributed for the computation of stable correlations. Multiple species data from the unique circumglobal flight of a Pan American airliner on 28-30 October 1977 are discussed with particular regard to the apparent interhemispheric differences in tropospheric species concentrations, variation between the Arctic and Antarctic stratospheres, to possible covariations between species, and to potential source regions for various constituents.

Falconer, P. D.↗

NASA NTRS1999

Coronal Dimmings and Energetic CMEs

We have analyzed the coronal dimmings for seven fast (> 600 km/s) coronal mass ejections (CMEs) occurring between 23 April and 9 May which were associated with flares from NOAA active region (AR) 8210. These dimming regions were identified by their strong depletion in coronal emission within a half hour of the estimated time of CME lift-off. They included areas which were as dark as quiescent coronal holes as well as other regions with weaker brightness depletions. We found that the extended dimming areas in these events generally mapped out the apparent "footprint" of the CME. In two of the seven cases, a pair of dimmings were more or less symmetrically positioned north and south of the flare site. In the five remaining cases, the dimmings were most prominent to the north of AR 8210 (approximately S15 latitude) and extended well north of the solar equator, consistent with the locations of the CMEs. We discuss the implications of these results for the sigmoid/double dimming/flux rope model of CMEs.

Thompson, B. J.↗

NASA NTRS1983

Design analysis of Rayleigh-step floating-ring seals

The analysis and design of a 50-mm diameter floating-ring helium buffer seal are described. The seal rings incorporated Rayleigh-step lift pads to provide hydrodynamic forces to separate the rings from the shaft. Maximum surface speed is 183 m/s (600 fps) and maximum buffer gas pressure is 1389 kPa (200 psia). An operating range map was computed as a function of speed and pressure. Contradictory problems arise due to excessive friction preventing ring tracking at low-speed, high-pressure conditions and insufficent friction to retard inertia driven motions at high-speed, low-pressure conditions. Steady-state and dynamic analyses and performance are described, as well as the results of thermal studies.

Artiles, A.↗

NASA NTRS1990

Estimate of loads during wing-vortex interactions by Munk's transverse-flow method

The inviscid, incompressible interaction of a wing with a vortex is studied by use of Munk's transverse-flow method. The method assumes that the loading on the wing is such that the local circulatory flow of the vortex is turned so that the wing and its vortex wake act as a barrier to the flow. This permits the analysis to be carried out by mapping the transverse flowfield into the flow about a circle to find the vorticity distribution in the wake. Closed-form expressions are then derived for the bound circulation in the wind and for the lift and rolling moment induced by the vortex on the encountering wing. Comparisons of the loads predicted by these relationships with those of vortex-lattice theory for a flat wing of a rectangular planform indicate that they accurately represent the various parameters when the aspect ratio of the encountering wing is less than about two. When flat rectangular wings of higher aspect ratios are considered, some sort of correction is needed. Examples are then presented to illustrate some applications of the results.

Rossow, Vernon J.↗

NASA NTRS1973

A compilation of studies from Atmospheric Variability Experiment (AVE)

Five methods for obtaining the sign of vertical motion at various levels in the atmosphere were investigated to determine which gave the best explanation for areas of rain and no-rain in the southeastern United States during the period February 19-22, 1964. The methods used were the terrain-induced vertical motion, the kinematic method including the terrain effect, the adiabatic method, the omega equation, and the vorticity equation combined with Dines' Compensation Principle. Stability and moisture availability were considered but not as extensively as vertical motion. Values of vertical motion obtained by the kinetic method, including orographic lifting produced the best agreement with the observed areas. When terms in the omega equation were added through use of constant multipliers, results comparable to the adiabatic method were obtained. Without this addition large uncertainties occurred. Maps showing areas where terms of the omega equation would indicate positive vertical motion did not correlate well with the observed rainfall patterns.

Scoggins, J. R.↗

NASA NTRS1986

Analytical observations on the aerodynamics of a delta wing with leading edge flaps

The effect of a leading edge flap on the aerodynamics of a low aspect ratio delta wing is studied analytically. The separated flow field about the wing is represented by a simple vortex model composed of a conical straight vortex sheet and a concentrated vortex. The analysis is carried out in the cross flow plane by mapping the wing trace, by means of the Schwarz-Christoffel transformation into the real axis of the transformed plane. Particular attention is given to the influence of the angle of attack and flap deflection angle on lift and drag forces. Both lift and drag decrease with flap deflection, while the lift-to-drag ratioe increases. A simple coordinate transformation is used to obtain a closed form expression for the lift-to-drag ratio as a function of flap deflection. The main effect of leading edge flap deflection is a partial suppression of the separated flow on the leeside of the wing. Qualitative comparison with experiments is presented, showing agreement in the general trends.

Oh, S.↗

NASA NTRS1972

Numerical calculation of transonic flow about swept wings.

Description of a mixed elliptic-hyperbolic relaxation algorithm which calculates solutions to the three-dimensional, nonlinear transonic small disturbance potential equation for flows about thin swept lifting wings with free-stream Mach number less than 1. The algorithm is designed to treat supercritical flows, including cases with embedded shock waves. Nonrectangular planform shapes, including sweep and taper, are treated by a coordinate transformation which maps the wing planform into a rectangle. Computed results at angles of attack of 0 and 2 deg for a AR = 4, constant chord, 23.75 deg sweptback planform model with a Lockheed C141 airfoil section are compared with data obtained experimentally for both subcritical and supercritical flows. Subcritical results are also compared with those obtained by a subsonic 'panel' method.

Ballhaus, W. F.↗

NASA NTRS1972

Static performance of a 13.97 cm (5.5 inch) diameter model VTOL lift fan

A tip-turbine-driven fan of the type currently being used in wind tunnel tests of VTOL lift fan models was tested. Values of thrust, weight flow, exit total and static pressure, exit swirl angle, and turbine temperature drop were measured as a function of fan speed for several inlet and exit configurations. A standard fan performance map was also obtained.

Lowe, W. H.↗

NASA NTRS1972

Analysis of radiation and meteoroid satellite data

The data obtained in earth orbit by the Radiation and Meteoroid Satellite (RMS) were interpreted and reduced to a form which will be usable by future space experimenters. The required tasks are detailed. Computer programs were written which lifted the raw data and associated emphemeris data from the GFE magnetic tapes. The engineering data was then used to evaluate the performance of the spacecraft and the experiments. The radiation data was used to prepare flux, spectral, and dose maps of the South Atlantic magnetic anomaly where possible. The meteoroid data was used to determine a rough estimate of the meteoroid flux and in general evaluate the performance of the thin-film meteoroid sensors. The degree of success of the RMS mission was evaluated in light of the separation anomaly which occurred between RMS and OFO during launch.

Farmer, B. J.↗

NASA NTRS1986

Development of the instruments for the Gamma Ray Observatory

The Gamma Ray Observatory (GRO) is to be launched in 1988 by the STS. The GRO will feature four very large instruments: the Oriented Scintillation Spectrometer Experiment (OSSE), the Imaging Compton Telescope (COMPTEL), the Energetic Gamma Ray Experiment Telescope (EGRET) and the Burst and Transient Source Experiment (BATSE). The instruments weigh from 900-1200 kg each, and required the development of specialized lifting and dolly devices to permit their assembly, manipulation and testing. The GRO is intended a{s a tool for studying discrete celestial objects such as black holes, neutron stars and other gamma-ray emitting objects, scanning for nucleosynthesis processes, mapping the Galaxy and other, high energy galaxies in terms of gamma rays, searching for cosmological effects and observing gamma ray bursts. The instruments will be sensitive from the upper end mof X-rya wavelengths to the highest energies possible. Details of the hardware and performance specifications of each of the instruments are discussed.

Madden, J. J.↗

NASA NTRSDate not supplied

Unsteady Aerodynamic Modeling of Atmospheric Entry Vehicles in Subsonic and Incompressible flow: A Frequency Response Approach

The determination of time-varying lift force and pitch moment generated by a purely pitching Earth-entry capsule is investigated. Experiments were conducted in the 12-foot Low-Speed Tunnel at NASA Langley Research Center, testing a range of oscillation frequencies at a zero-mean angle of attack with a pitching amplitude of 10 degrees. In light of these measurements, a closed-form set of analytically derived equations for lift and moment was used to develop a semi-empirical formulation, incorporating empirically determined values from the experimental runs. The equations are grounded in potential flow theory, Theodorsen's classical theory of unsteady aerodynamics, and the Joukowski theorem of conformal mapping. The unsteady aerodynamics generated by the oscillating body are then modeled by constructing frequency response functions, with quasi-steady forces and moments serving as inputs and unsteady forces and moments as outputs. The experimentally determined gain and phase variations characterize the unsteady nature of the flow and the system's response and flow time-lag to input flow parameters for a blunt-body entry vehicle. The final semi-empirical model is validated with a set of parameters beyond the initial test matrix.

Entry Systems Modeling↗

NASA NTRSDate not supplied

Unsteady Aerodynamic Modeling of Atmospheric Entry Vehicles in Subsonic and Incompressible Flow: A Frequency Response Approach

Entry Systems Modeling↗

NASA NTRS2007

Airframe Noise Results from the QTD II Flight Test Program

With continued growth in air travel, sensitivity to community noise intensifies and materializes in the form of increased monitoring, regulations, and restrictions. Accordingly, realization of quieter aircraft is imperative, albeit only achievable with reduction of both engine and airframe components of total aircraft noise. Model-scale airframe noise testing has aided in this pursuit; however, the results are somewhat limited due to lack of fidelity of model hardware, particularly in simulating full-scale landing gear. Moreover, simulation of true in-flight conditions is non-trivial if not infeasible. This paper reports on an investigation of full-scale landing gear noise measured as part of the 2005 Quiet Technology Demonstrator 2 (QTD2) flight test program. Conventional Boeing 777-300ER main landing gear were tested, along with two noise reduction concepts, namely a toboggan fairing and gear alignment with the local flow, both of which were down-selected from various other noise reduction devices evaluated in model-scale testing at Virginia Tech. The full-scale toboggan fairings were designed by Goodrich Aerostructures as add-on devices allowing for complete retraction of the main gear. The baseline-conventional gear, faired gear, and aligned gear were all evaluated with the high-lift system in the retracted position and deployed at various flap settings, all at engine idle power setting. Measurements were taken with flyover community noise microphones and a large aperture acoustic phased array, yielding far-field spectra, and localized sources (beamform maps). The results were utilized to evaluate qualitatively and quantitatively the merit of each noise reduction concept. Complete similarity between model-scale and full-scale noise reduction levels was not found and requires further investigation. Far-field spectra exhibited no noise reduction for both concepts across all angles and frequencies. Phased array beamform maps show inconclusive evidence of noise reduction at selective frequencies (1500 to 3000 Hz) but are otherwise in general agreement with the far-field spectra results (within measurement uncertainty).

Elkoby, Ronen↗