Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LiCl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electrochemical measurement and analysis of YCl 3 , ScCl 3 , GdCl 3 and MgCl 2 in molten eutectic LiCl-KCl

For this work, electrochemical measurements of YCl 3 , ScCl 3 , GdCl 3 and MgCl 2 were obtained in molten LiCl-KCl eutectic at 773 K using a three-electrode configuration. Tungsten rods were used as the working and counter electrodes. Two quasi- and one reference electrode(s) (glassy carbon, nickel wire, and Ni/NiO) were used to collect electrochemical measurements of the analyte salts. Cyclic voltammetry data were analyzed to calculate values of diffusion coefficient, exchange current density, and charge transfer resistance and were determined to be on the order of 10 –5 cm 2 s –1 , 10 –2 A cm –2 , and 10 0 Ω; respectively. In general, the values of diffusion coefficients were found to be consistent with those reported of high-temperature molten salts. Relatively large values of exchange current density corresponded with smaller values of charge transfer resistance. These values were found to be reasonable in comparison to results available in the literature. The measured cyclic voltammograms were normalized with respect to both lithium reduction and chloride ion oxidation potentials. Such a normalization technique is effective for comparing experimentally obtained cyclic voltammetry data to those that have been published. An analysis of experimentally obtained results indicates the relation of electrode reactions (e.g., differences of reduction potentials) are independent of the choice of reference electrode. Additionally, the choice of reference electrode did not affect the electrochemical window, exchange current density, or diffusion coefficient values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Fundamental flow characterization for LiCl–KCl molten salt natural circulation closed loop

Molten salt flow characterization presents numerous challenges due to the hostile environments that cause corrosion and erosion of instrumentation and structural components. To support future molten salt flow characterization under natural convection conditions, a LiCl–KCl eutectic molten salt loop was designed and constructed. The primary objective of this loop is to facilitate natural convection as the principal cooling mechanism, enabling insights into the physics behind natural convection in closed loops and serving as a baseline for loop dimensional and non-dimensional analyses. Here, this study summarizes the fundamental functions employed for flow characterization and introduces a model to estimate flow rate when intrusive instrumentation is unavailable. The approach relies solely on structural surface measurements to avoid flow disturbances. Furthermore, a comprehensive thermal–hydraulic analysis is included to deepen understanding of the system’s behavior.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Characterizing pulse reverse-pulse uranium recovery in molten LiCl-KCl with intermittent electrochemical impedance spectroscopy

In this work, EIS was applied to characterize the temporal recovery of uranium from UCl 4 onto a tungsten electrode in molten LiCl-KCl salt between sets of pulse reverse-pulse (PRP) deposition steps. Impedance measurements were fitted to an equivalent circuit (EC) model of the electrode interface using Simplex optimization to calculate the double layer capacitance, charge transfer resistance, Warburg impedance, and CPE-restricted diffusion. Diffusion of uranium towards the electrode surface dominated the surface interactions for the first 80 cycles, followed by a transition to kinetic control for the remaining 520 cycles. A decrease in the Warburg impedance showed depletion of uranium from the bulk melt, which was confirmed to be a 52.5% reduction through ICP-OES. Reduction in the phasance from CPE-restricted diffusion suggested the formation of pores in the uranium deposits, which was confirmed through SEM characterization.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Unraveling Impurity-Dependent Morphological and Chemical Evolution of Ni–20Cr Alloy in Eutectic LiCl–KCl Molten Salt

Understanding the interfacial evolution of alloys in molten salt with different amounts of water (H 2 O) and oxygen (O 2 ) impurities is significant for applications in many fields, including concentrated solar power, molten salt reactors, and applications in pyrochemical reprocessing and electrorefining. Additionally, the impurity-driven corrosion mechanisms that lead to various morphological and chemical evolution characteristics at the interfaces of structural alloys and molten salts are not fully understood. In the present work, the three-dimensional (3D) morphological evolution of Ni-20Cr microwires in LiCl-KCl was studied at 500 °C under different moisture and oxygen conditions using in situ synchrotron transmission X-ray microscopy (TXM) and scanning transmission electron microscopy (STEM) techniques. No significant morphological changes were observed in Ni-20Cr microwires under vacuum conditions. However, the wires exhibited distinct morphological evolutions when exposed to molten salt containing H 2 O alone, as well as when both H 2 O and O 2 were present. Furthermore, Cr 2 O 3 precipitates were observed in the molten salt during corrosion with only H 2 O present, while Cr 6+ species were identified in the salt when O 2 was added. Further, these findings are crucial for understanding the corrosion mechanisms of molten salt with different amounts of H 2 O and O 2 contamination, providing insights for developing corrosion mitigation methods and improving the stability of containment alloys in molten salt applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electrochemical Deposition with Redox Replacement of Lanthanum with Uranium in Molten LiCl-KCl

Electrochemical recovery of dilute concentrations of actinides from spent nuclear fuel would reduce the longevity of storing high-level nuclear waste. Electrochemical deposition with redox replacement (EDRR) is used in a molten salt medium for the selective electrochemical recovery of uranium in the presence of excess concentrations of lanthanum. In each EDRR cycle, after a short electrodeposition pulse, the deposited lanthanum is spontaneously replaced by uranium at open circuit. After repeated cycles, uranium metal was obtained on a tungsten electrode immersed in LiCl-KCl melt that contained 1 wt.% lanthanum chloride – 0.15 wt.% uranium 4+ chloride. Here, scanning electron microscopy and energy dispersive X-ray spectroscopy analysis revealed uranium particles approximately 0.5 - 1 μm with well-defined rectangular shapes; and with 20 – 60 times more uranium recovered on the surface of the electrode than lanthanum.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Effect of Soluble Corrosion Products on Electrical Double Layer in LiCl-KCl Molten Salts

Corrosion in molten salts greatly hampers the application for renewable energy applications like molten salt reactors. To develop effective strategies for corrosion mitigation, understanding the interfacial structures and properties such as specific ion adsorption and electrical double layer capacitance are crucial. Using cyclic voltammetry and electrochemical impedance spectroscopy, we systematically studied the interfaces on various model electrodes including W (solid), Bi (liquid), and the stainless steel 316 in LiCl-KCl eutectic molten salts with the addition of corrosion species CrCl 2 and FeCl 2 . Both Cr 2+ and Fe 2+ ions increased electrical double layer capacitance, with Cr 2+ showing specific adsorption behavior and shifting the potential of zero charge, while Fe 2+ had minimal effect on point of zero charge. Two-working electrode measurements revealed increasing open-circuit potential and electrical double layer capacitance during the exposure of stainless steel 316, indicating its progressive corrosion and ion accumulation at the interface. X-ray photoelectron spectroscopy and Raman confirmed Cr enrichment at the interface. This work highlights the strong correlation between electrical double layer behavior and corrosion dynamics in molten salts and suggests electrical double layer capacitance as a sensitive, in situ indicator for corrosion monitoring.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Materials Data on LiCl by Materials Project

LiCl is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Li1+ is bonded to six equivalent Cl1- atoms to form a mixture of corner and edge-sharing LiCl6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Li–Cl bond lengths are 2.58 Å. Cl1- is bonded to six equivalent Li1+ atoms to form a mixture of corner and edge-sharing ClLi6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on LiCl by Materials Project

LiCl is Wurtzite structured and crystallizes in the hexagonal P6_3mc space group. The structure is three-dimensional. Li1+ is bonded to four equivalent Cl1- atoms to form corner-sharing LiCl4 tetrahedra. All Li–Cl bond lengths are 2.40 Å. Cl1- is bonded to four equivalent Li1+ atoms to form corner-sharing ClLi4 tetrahedra.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Determination and Comparison of Parameters from Cyclic Voltammetry of LaCl 3 in Eutectic LiCl-KCl

Electrochemical measurements of LaCl 3 were obtained in eutectic LiCl-KCl at 773 K. Cyclic voltammetry data were acquired using a tungsten electrode LaCl 3 amounts in the molten salt in the range of 0.5 to 3.0 wt%. Both cyclic voltammetry and Tafel analyses of the data resulted in calculation of values for the charge transfer coefficient (0.262), diffusion coefficient (1.67 × 10 -5 cm 2 s -1 ), exchange current density (0.0148 to 0.0473 A cm -2 ), and charge transfer resistance (0.404 to 1.99 Ω) related to lanthanum ions in the molten salt. Calculated values were compared to those available in the literature. The values of parameters found in literature varied significantly in comparison to those in the present study due to dissimilar experimental conditions, e.g., electrode material, temperature, and LaCl 3 concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Synthesis of americium trichloride via chlorination of americium oxide using zirconium tetrachloride in LiCl-KCl molten salt

To better inform electrorefining operations of used nuclear fuel, a fundamental understanding of the electrochemical properties of each actinide in the molten salt electrolyte is needed. Access to actinide chlorides is thus required to support measurement of these properties. In this work, we synthesized americium trichloride through a novel pathway comprising chlorination of Am2O3 with ZrCl4 in a LiCl-KCl molten salt at 500 degrees C. The formation of AmCl3 was confirmed by cyclic voltammetry and gamma spectroscopy. This chlorination method does not produce mixed hazardous-radioactive waste and the byproduct, ZrO2, is not electrochemically active and does not affect the actinide electrodeposition reaction.

actinide chloride synthesis↗
DOE OSTI2023

Time dependent chlorination of CeO 2 , La 2 O 3 and Nd 2 O 3 by ZrCl 4 dissolved in eutectic LiCl–KCl

Partial chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 was achieved using ZrCl 4 dissolved in molten LiCl-KCl at 450°C over a period of 4-5 hr. ZrCl 4 was pre-volatilized into an argon stream to maintain a constant vapor pressure for equilibration with the salt. This approach was effective at maintaining the ZrCl 4 concentration at the solubility limit of 1.3 mol% in the molten salt throughout the duration of two of the chlorination experiments and within about 60% of the solubility limit in the third experiment. Based on the analysis of salt samples, fractional conversion after four hours of reaction for CeO 2 , and five hours for La 2 O 3 , and Nd 2 O 3 were calculated to be 0.97, 0.28, and 0.65 respectively. Assuming a shrinking core diffusion-limited model, the diffusivity of ZrCl 4 through the hypothesized ZrO 2 layer was calculated for the chlorination of CeO 2 , La 2 O 3 , and Nd 2 O 3 were 1.76 x 10 -10 cm 2 /sec, 7.85 x 10 -12 cm 2 /sec, and 7.42 x 10 -12 cm 2 /sec, respectively. Given the extremely low values calculated for diffusivity, it was concluded that the process is chemical reaction rate limited and that a complete reaction of each rare earth oxide could be achieved. Furthermore, a chemically controlled shrinking core model was shown to also fit the experimental data closely.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Understanding a novel form of intergranular corrosion of stainless steel 316L exposed to molten LiCl-Li 2 O-Li

We report stainless steel 316 L exposed to LiCl-Li2O molten salt containing Li metal for 500 and 1000 h experiences deep intergranular attack and bulk void formation. This degradation is due to a synergistic corrosion mechanism, different than other forms of molten salt corrosion, where Cr and Mn oxides and carbides form along grain boundaries and are dissolved by Li metal. Synchrotron transmission X-ray microscopy 3D imaging is used to show corrosion morphology and Cr enrichment and depletion in a novel format that has not previously been used for bulk corrosion samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Electrochemical recovery of Nd using liquid metals (Bi and Sn) in LiCl-KCl-NdCl 3

Highly efficient recovery of Nd into liquid metals of Bi and Sn was achieved in molten LiCl-KCl-NdCl 3 electrolyte at 773–973 K by leveraging the strong interactions of Nd with liquid metals. Based on the emf measurements of Nd-Sn and Nd-Bi alloys, the activity values of Nd were determined as low as 1.1–5.8×10 –13 in both liquid metals at 973 K while the solubility of Nd was found to be 1.46 mol% in Sn and 5.65 mol% in Bi. Both liquid metals demonstrated high round-trip coulombic efficiencies (>99.3%) during deposition-removal cycles of 10–50 mA cm –2 and high recovery capacity up to approximately 20 mol% Nd beyond the solubility limit. In addition, a high Nd recovery yield (84–90%) with respect to the applied charge was confirmed based on chemical analysis of electrolysis products in Bi after constant current electrolysis (–50 mA cm –2 ) at 873–973 K. Overpotentials during the Nd deposition process were attributed to charge-transfer and mass-transport resistances based on the current-potential curve and electrochemical impedance spectroscopy. The charge-transfer kinetics of Nd deposition into liquid metals was facile with high exchange current densities at ~220 mA cm –2 . Finally, the exceptionally high recovery efficiency for Nd in the molten chloride is thought to result from strong chemical interactions (i.e., low activity) of Nd in liquid metals that encourage one-step reduction, i.e., Nd 3+ + 3e → Nd(in Bi or Sn) by effectively suppressing side reaction pathways from multivalent states (Nd 2+ and Nd 3+ ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Preparation of a uranium monocarbide anode and electrochemical characterization in molten LiCl-KCl-UCl 3

Porous uranium carbide (UC) pellets possessing moderate electrical conductivity were synthesized by reaction of UO 2 with graphite at temperatures up to 1550°C under rough vacuum. Conversions as high as 98% were achieved at soak times of 2-4 hours. The electrochemistry of the UC pellets in molten LiCl-KCl-6.5 wt% UCl 3 was explored using a variety of techniques including DC polarization methods, cyclic voltammetry, chronopotentiometry and bulk electrolysis. Here, the electrode reaction for anodic dissolution was found to be kinetically controlled by dissociation of UC to a transition state complex that was hypothesized to consist of a uranium atom partially complexed by chloride ions. Precise measurements of current efficiencies using chronopotentiometry indicated upper limits of 90.9 ± 3.4% and 98.3 +1.7/-3.7% for anode and cathode, respectively, when operating at anodic overpotentials near +300 mV. Bulk electrolysis of a UC pellet performed by passing 98% of the theoretical charge resulted in nearly complete recovery of its uranium content as highly pure metal at the cathode.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermodynamic properties of Gd-Bi alloys determined by emf measurements in LiCl-KCl-GdCl 3 electrolyte

Thermodynamic properties of binary Gd-Bi alloys (mole fraction, x Gd = 0.02–0.35) were determined using electromotive force (emf) measurements in molten LiCl-KCl-GdCl 3 electrolyte in complement with structural, microstructural, and thermal characterization. X-ray diffractometry (XRD) and scanning electron microscopy (SEM) identified the phase constituents of Gd-Bi alloys (x Gd = 0.02–0.35) as Bi matrix and GdBi compound. According to differential scanning calorimetry (DSC) measurements up to 1250 K, a eutectic transition [L = Bi + GdBi] was observed at 543 K but the reported peritectic transition [L + GdBi = GdBi 2 ] was not detected, suggesting the absence of the GdBi 2 compound. Based on structural, microstructural, and thermal characterization of Gd-Bi alloys (x Gd = 0.02–0.35), the GdBi 2 compound was not detected, and its thermodynamic stability is questionable. The emf of Gd-Bi alloy (x Gd = 0.16) at 700–1048 K relative to Gd(s) was measured by electrodepositing pure Gd metal at 25 K increments. Further, the emf values of Gd-Bi alloys were determined via coulometric titration of Gd into liquid Bi using a two-phase [L + GdBi] alloy as a reference electrode at 773–973 K. The solubility of Gd in liquid Bi was also estimated to be 0.50 mol% (773 K), 0.99 mol% (873 K), and 2.21 mol% (973 K) and the excess partial molar Gibbs energy (Δ$\mathrm{\bar{G}^{ex}_{Gd}}$) of liquid Gd-Bi alloys was as low as 65 kJ mol –1 , indicating strong chemical interactions between Gd and Bi.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrochemical properties of Gd(III) ions in LiCl-KCl-GdCl 3 at 723–1023 K

Electrochemical behavior of Gd(III) ions in molten LiCl-KCl-GdCl 3 was investigated at 723–1023 K via cyclic voltammetry using tungsten as a working electrode, Gd-Bi (mole fraction, x Gd = 0.16) as a reference electrode, and Gd-Bi (x Gd = 0.02) as a counter electrode. A single reduction–oxidation wave was observed, confirming a single-step, 3-electron transfer Gd(III)/Gd transition. The cathodic peak potential exhibited minimal change (<13 mV) over a wide range of scan rates (0.05–0.30 V s –1 ), indicating facile charge transfer kinetics (i.e., a reversible electrode process). A nucleation overpotential associated with solid Gd deposition was observable at low temperatures (T < 823 K). The mass transport properties of Gd(III) ions were estimated using the Berzins and Delahay relation based on diffusion-limiting peak current. The diffusivity values were determined to be D Gd(III) = 0.5–2.7 × 10 –5 cm 2 s –1 at 723–1023 K with an associated activation energy of E a = 33.9 (±1.0) kJ mol –1 . Finally, the two-phase [liquid + GdBi] Gd-Bi alloy reference electrode experienced less than 0.5 mV of drift over 5 days of repeated electrochemical measurements, indicating high stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrochemical recovery of Gd into liquid Bi in molten LiCl-KCl-GdCl 3

The electrochemical recovery of Gd into liquid Bi electrodes was investigated in molten LiCl-KCl-GdCl 3 electrolyte at 773–973 K using constant currents of 10–150 mA cm −2 . High round-trip coulombic efficiency (>97 %) was demonstrated for deposition and removal of Gd into and from liquid Bi at all temperatures, confirming chemically reversible electrode reactions towards high recovery yield of Gd using liquid Bi. Furthermore, the overpotential associated with deposition of Gd into the liquid Bi electrode gradually increased with current density and decreased with temperature. At the lowest temperature of 773 K, a steep increase in overpotential was evident at high current densities due to slower mass transport and low solubility of Gd in liquid Bi (0.5 at.% Gd). Based on the impedance spectra of Bi electrodes at 773–973 K, the exchange current density was estimated to be 110–220 mA cm −2 , indicating facile charge transfer at the liquid electrode-electrolyte interface. Post-mortem characterization of Bi cathodes after electrolysis at 873 K indicated the formation of a solid GdBi(s) compound layer at the Bi electrode surface. Chemical analysis of Bi cathodes at various deposited Gd compositions resulted in Faradaic efficiencies of ∼75–84 %, promising a high recovery yield of Gd from molten salts using a strongly-interacting liquid Bi electrode.

36 - MATERIALS SCIENCE↗