Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Lambda Point”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Working model of the London moment readout system

The operating characteristics of a porous plug which has liquid helium on one side and which is pumped on under vacuum on the other side are discussed. The system investigated consists of a container of liquid helium which is well isolated, and the only means for mass flow out of the container is through a plug mode of porous material. The plug was assumed to have liquid helium on the container side while the other side of the plug is evacuated. Three cases were considered: (1) perfect evacuation with zero pressure, (2) evacuation through a chocked orifice, and (3) evacuation through a long, small diameter pipe with heating. Mass flow rates were determined along with mass flow at temperature above the lambda point temperature. Solutions were obtained for normal and superfluid velocity.

Hendricks, J. B.↗
NASA NTRS1988

Cavitation in flowing superfluid helium

Flowing superfluid helium cavitates much more readily than normal liquid helium, and there is a marked difference in the cavitation behavior of the two fluids as the lambda point is traversed. Examples of cavitation in a turbine meter and centrifugal pump are given, together with measurements of the cavitation strength of flowing superfluid helium. The unusual cavitation behavior of superfluid helium is attributed to its immense thermal conductivity .

Daney, D. E.↗
NASA NTRS1990

Science and applications of He-II in space

Applications of He II in space environment are described, with special attention given to application of He II as a cryogen in several completed and planned space mission. Major applications of He II include the completed Infrared Astronomical Satellite and the Spacelab 2 Infrared Telescope missions, and planned missions that include the NASA Cosmic Background Experiment, the Space IR Telescope, the Large Deployable Reflector, and the ESA's Infrared Space Observatory. Science experiments include the completed Superfluid Helium in Zero Gravity Experiment and the planned Superfluid Helium On-Orbit Transfer and Lambda Point experiments.

Mason, Peter V.↗
NASA NTRS1992

Self-driven cooling loop for a large superconducting magnet in space

Pressurized cooling loops in which superfluid helium circulation is driven by the heat being removed have been previously demonstrated in laboratory tests. A simpler and lighter version which eliminates a heat exchanger by mixing the returning fluid directly with the superfluid helium bath was analyzed. A carefully designed flow restriction must be used to prevent boiling in this low-pressure system. A candidate design for Astromag is shown that can keep the magnet below 2.0 K during magnet charging. This gives a greater margin against accidental quench than approaches that allow the coolant to warm above the lambda point. A detailed analysis of one candidate design is presented.

Mord, A. J.↗
NASA NTRS1993

DADiSP processing guide

A guide for DADiSP software, intended for use by the Lambda Point Experiment (LPE) Team during and after the United States Microgravity Payload (USMP)-1 mission, is presented. DADiSP is a Data Analysis and Display Software developed and marketed by DSP Development Corporation, Cambridge, Massachusetts. This guide is intended to be used in addition to the DADiSP Worksheet User Manual and Reference Manual which are supplied by the company with the software. Technical support for DADiSP is available from DSP at (617) 577-1133. Access to DADiSP on Acceleration Characterization and Analysis Project (ACAP) EGSE is being provided to the LPE team during USMP-1 for off-line processing of SAMS data.

Rogers, Melissa J. B.↗
NASA NTRS1994

Joint Launch + One Year Science Review of USML-1 and USMP-1 with the Microgravity Measurement Group

On September 22-24, 1993, investigators from the First United States Microgravity Laboratory (USML-1) and the First United States Microgravity Payload (USMP-1) Missions met with the Microgravity Measurement Group (MGMG) in Huntsville Alabama, to discuss science results and the microgravity environments from the respective missions. USML-1 was launched June 1992, and USMP-1 was launched October 1992. This document summarizes from the various investigations, the comprehensive results and highlights, and also serves as a combined mission report for the two missions. USML-1 was the first totally U.S.-sponsored mission dedicated to microgravity research and included 31 investigations in fluid dynamics, crystal growth, combustion, biotechnology, and technology demonstrations supported by 11 facilities. The papers in these proceedings attest to the wealth of information gleaned from the highly successful mission. On the USMP-1 mission, both the MEPHISTO and the Lambda Point experiments exceeded by over 100% their planned science objectives. The mission also marked the first time that acceleration data were down-linked and analyzed in real-time. The meeting, which concentrated on flight results, brought low-gravity investigators, accelerometer designers, and acceleration data analysis experts together. This format facilitated a tremendous amount of information exchange between these varied groups. Several of the experimenters showed results, some for the very first time, of the effects of residual accelerations on their experiment. The proceedings which are published in two volumes also contain transcriptions of the discussion periods following talks and also submittals from a simultaneous poster session.

Microgravity↗
NASA NTRS2000

High Resolution Thermometry for EXACT

High Resolution Thermometers (HRTs) based on SQUID detection of the magnetization of a paramagnetic salt or a metal alloy has been commonly used for sub-nano Kelvin temperature resolution in low temperature physics experiments. The main applications to date have been for temperature ranges near the lambda point of He-4 (2.177 K). These thermometers made use of materials such as Cu(NH4)2Br4 *2H2O, GdCl3, or PdFe. None of these materials are suitable for EXACT, which will explore the region of the He-3/He-4 tricritical point at 0.87 K. The experiment requirements and properties of several candidate paramagnetic materials will be presented, as well as preliminary test results.

Panek, J. S.↗
NASA NTRS1994

Joint Launch + One Year Science Review of USML-1 and USMP-1 with the Microgravity Measurement Group

On September 22-24, 1993, investigators from the First United States Microgravity Laboratory (USML-1) and the First United States Microgravity Payload (USMP-1) Missions met with the Microgravity Measurement Group (MGMG) in Huntsville, Alabama, to discuss science results and the microgravity environments from the respective missions. USML-1 was launched June 1992, and USMP-1 was launched October 1992. This document summarizes from the various investigations, the comprehensive results and highlights, and also serves as a combined mission report for the two missions. USML-1 was the first totally U.S.-sponsored mission dedicated to microgravity research and included 31 investigations in fluid dynamics, crystal growth, combustion, biotechnology, and technology demonstrations supported by 11 facilities. The papers in these proceedings attest to the wealth of information gleaned from the highly successful mission. On the USMP-1 mission, both the MEPHISTO and the Lambda Point experiments exceeded by over 100% their planned science objectives. The mission also marked the first time that acceleration data were down-linked and analyzed in real-time. The meeting, which concentrated on flight results, brought low-gravity investigators, accelerometer designers, and acceleration data analysis experts together. This format facilitated a tremendous amount of information exchange between these varied groups. Several of the experimenters showed results, sane for the very first time, of the effects of residual accelerations on their experiment. The proceedings which are published in two volumes also contain transcriptions of the discussion periods following talks and also submittals from a simultaneous poster session.

Ramachandran, N.↗
NASA NTRS1993

Design of a Low Gravity Simulator for Performing Non-Equilibrium Investigations near the Lambda Transition of ^4He

A design is presented of a low gravity simulator where a magnetic field gradient is employed to oppose the hydrostatic pressure effects of gravity. It appears feasible to reduce the effective gravity environment of the helium in the cell by about two orders of magnitude. The corresponding shift in transition temperature with vertical height would be reduced to 12.7 nK/cm. Methods for instrumenting the simulator to perform high resolution investigations of non-equilibrium phenomena near the lambda point are presented. The advantages of using a low gravity simulator in searching for the predicted change in character of the superfluid transition from continuous to first order in the presence of a heat current are also discussed.

Israelsson, U. E.↗
NASA NTRS1995

Performance Improvement of the CHeX Flight Cryostat

The JPL flight cryostat last flew on the Space Shuttle in October 1992 in support of the Lambda Point Experiment. A new experiment, the Confined Helium Experiment (CHeX), now in development will reuse this cryostat. An improvement to the cryostat performance was necessitated by the CHeX experiment having a longer mission requirement and stricter requirements imposed by NASA with respect to a launch-scrub turnaround scenario. The parasitic heat load reduction necessary to relieve both constraints was about 15percent or 1 liter/day. The techniques implemented to achieve this goal, and subsequent results are presented along with a thermal model used during the analysis of the cryostat.

cryostats↗
NASA NTRS1983

Multiple buoyancy driven flows in a vertical cylinder heated from below

The structure of axisymmetric buoyancy-driven convection in a vertical cylinder heated from below is probed by finite element solution of the Boussinesq equations coupled with computed-implemented perturbation techniques for detecting and tracking multiple flows and for determining flow stability. Results are reported for fluids with Prandtl number of one and for cylinders with aspect ratio (Lambda) (defined as the height to radius of the cylinder) between 0.5 and 2.25. Extensive calculations of the neutral stability curve for the static solution and of the nonlinear motions along the bifurcating flow families show a continuous evolution of the primary cellular motion from a single toroidal cell to two and three cells nested radially in the cylinder, instead of the sharp transitions found for a cylinder with shear-free sidewalls. The smooth transitions in flow structure with Rayleigh number and lambda are explained by nonlinear connectivity between the first two bifurcating flow families formed either by a secondary bifurcation point for Lambda or = Lambda * approximately 0.80 or by a limit point for Lambda Lambda *. The transition between these two modes may be described by the theory of multiple limit point bifurcation.

Yamaguchi, Y.↗
NASA NTRS1999

Coronal Structure: Legacy of EUVE

During this past school year, the Smithsonian Predoctoral student, Jorge Sanz-Forcada, began work on this Ph.D. thesis research which will focus on the coronal structure of active cool binary stars. He developed a semi-automatic algorithm to derive the emission measure distribution from EUVE spectra using the latest atomic parameters. To date, he has modeled our long EUVE pointing on lambda And that occurred in the fall of 1998, and has reduced and modeled spectra from EUVE pointings on AR Lac and UX Ari. Some of these observations were made simultaneous with the Advanced Satellite for Cosmology and Physics (ASCA) satellite, and the results reported at the HEAD meeting in Spring 1999.

Dupree, Andrea K,↗
DOE OSTI2025

ROSE Castor

ROSE Castor is a tool enabling automated verification of C++, built off of the ROSE compiler framework and the Why3 framework. Castor defines a verification language for providing specifications of C++ code, letting users perform automated functional formal verification of their C++ code. Castor is designed to target C++17, and supports a subset of the language, including classes, functions, templates, integers and booleans, pointers and references, and single inheritance. Castor currently does not support multiple or virtual inheritance, virtual functions, floating-point, threading, lambda functions, or the C++ STL, though some of these are planned in future updates. Castor ships with an in-house parser for parsing verification conditions.

Lane, PhillipA [Lawrence Livermore National Labora↗
NASA NTRS1986

Simultaneous observations of changes in coronal bright point emission at the 20 cm radio and He Lambda 10830 wavelengths

Preliminary results of observations of solar coronal bright points acquired simultaneously from ground based observatories at the radio wavelength of 20 cm and in the He I wavelength 10830 line on September 8, 1985, are reported. The impetus for obtaining simultaneous radio and optical data is to identify correlations, if any, in changes of the low transition-coronal signatures of bright points with the evolution of the magnetic field, and to distinguish between intermittent heating and changes in the magnetic field topology. Although simultaneous observations of H alpha emission and the photospheric magnetic field at Big Bear were also made, as well as radio observations from Owen Valley Radio Interferometer and Solar Maximum Mission (SSM) (O VIII line), only the comparison between He 10830 and the Very Large Array (VLA) radio data are presented.

Habbal, Shadia R.↗