Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Behavior of chars from Bursa Mustafa Kemal Pasa Alpagut and Balkesir Dursunbey Cakiirca Lignite (Turkey) during non-catalytic and catalytic gasification

The reactivities of chars obtained by pyrolysis of Bursa Mustafa Kemal Pasa Alpagut lignite and Balkesir Dursunbey Cakiirca lignite (Turkey) at different temperatures were determined by CO{sub 2} gasification and by combustion with O{sub 2}. Catalytic effect of Na{sub 2}CO{sub 3} on the CO{sub 2} and O{sub 2} gasification reactivity of chars was investigated. Gasification tests were performed in the fixed bed reactors operating at ambient pressure. Reactivity of chars during the CO{sub 2} gasification reactions was determined by calculating the reaction rate constants and reactivity of chars during the O{sub 2} gasification was determined by using ignition temperatures of the samples. Activation energies and Arrhenius constants of the chars on the CO{sub 2} gasification reactions were also calculated by the help of Arrhenius curves. The activation energy for CO{sub 2} gasification was generally decreased with pyrolysis temperature, due to the different surface characteristics and different nature of carbon atoms gasified as the gasification reactions proceed. Generally, the increase in pyrolysis temperature leads to an increase in gasification reactivity with CO{sub 2}. The reactivity of chars in catalytic gasification was higher than the corresponding non-catalytic reactivity of the same chars. Ignition temperature increased with increasing pyrolysis temperature.

01 COAL, LIGNITE, AND PEAT↗

Lignite-Derived Carbon Materials for Lithium-Ion Battery Anodes

This project involved collaboration between the University of North Dakota (UND) College of Engineering & Mines, Clean Republic, LLC (CR), and the North American Coal Corporation (NACoal) to develop advanced LIBs anodes from lignite-derived carbon materials. The overall goal of the project was to develop advanced anode materials for LIBs from lignite-derived carbon feedstocks.

01 COAL, LIGNITE, AND PEAT↗

Radiation intensity of lignite-fired oxy-fuel flames

The radiative heat transfer in oxy-fuel flames is compared to corresponding conditions in air-fuel flames during combustion of lignite in the Chalmers 100 kW oxy-fuel test facility. In the oxy-fuel cases the flue-gas recycle rate was varied, so that, in principle, the same stoichiometry was kept in all cases, whereas the oxygen fraction in the recycled flue-gas mixture ranged from 25 to 29 vol.%. Radial profiles of gas concentration, temperature and total radiation intensity were measured in the furnace. The temperature, and thereby the total radiation intensity of the oxy-fuel flames, increases with decreasing flue-gas recycle rate. The ratio of gas and total radiation intensities increases under oxy-fuel conditions compared to air-firing. However, when radiation overlap between gas and particles is considered the ratios for air-firing and oxy-fuel conditions become more similar, since the gas-particle overlap is increased in the CO{sub 2}-rich atmosphere. A large fraction of the radiation in these lignite flames is emitted by particles whose radiation was not significantly influenced by oxy-fuel operation. Therefore, an increment of gas radiation due to higher CO{sub 2} concentration is not evident because of the background of particle radiation, and, the total radiation intensities are similar during oxy-fuel and air-fuel operation as long as the temperature distributions are similar. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Kinetics and Mathematical Models for High-Pressure Gasification of Lignite-Switchgrass Blends: Cooperative Research and Development Final Report, CRADA Number CRD-11-447

NREL will work with Participant as a subtier partner under DE-FOA-0000240 titled "Co-Production of Power, Fuels, and Chemicals via Coal/Biomass Mixtures." The goal of the project is to determine the gasification characteristics of switchgrass and lignite mixtures and develop kinetic models. NREL will utilize a pressurized thermogravimetric analyzer to measure the reactivity of chars generated in a pressurized entrained-flow reactor at Participant's facilities and to determine the evolution of gaseous species during pyrolysis of switchgrass-lignite mixtures. Mass spectrometry and Fourier-transform infrared analysis will be used to identify and quantify the gaseous species. The results of the project will aid in defining key reactive properties of mixed coal biomass fuels.

09 BIOMASS FUELS↗

Selective oil agglomeration of lignite

In this study, desulfurization and deashing of Adiyaman-Glbai lignite by the agglomeration method were studied. For this purpose, three groups of agglomeration experiments were made. The effects of solid concentration, bridging liquid type and dosage, pH, and screen size on the agglomeration after desliming were investigated in the first group of experiments. The effects of lake water and sea water (the Mediterranean Sea water, the Aegean Sea water, and the Black Sea water) on the agglomeration were investigated in the second group of experiments. The effects of different salts (NaCl, MgCl{sub 2}, and FeCl{sub 3}) on the agglomeration were investigated in the third group of experiments. Agglomeration results showed that the usage of sea waters and soda lake water in the agglomeration medium had a positive effect on the reduction of total sulfur content of agglomerates. In addition, the usage of NaCl, MgCl{sub 2}, and FeCl{sub 3} in the agglomeration medium had a positive effect on the ash content reduction of the agglomerates. 27 refs., 10 figs., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗

Measurement of gas species, temperatures, coal burnout, and wall heat fluxes in a 200 MWe lignite-fired boiler with different overfire air damper openings

Measurements were performed on a 200 MWe, wall-fired, lignite utility boiler. For different overfire air (OFA) damper openings, the gas temperature, gas species concentration, coal burnout, release rates of components (C, H, and N), furnace temperature, and heat flux and boiler efficiency were measured. Cold air experiments for a single burner were conducted in the laboratory. The double-swirl flow pulverized-coal burner has two ring recirculation zones starting in the secondary air region in the burner. As the secondary air flow increases, the axial velocity of air flow increases, the maxima of radial velocity, tangential velocity and turbulence intensity all increase, and the swirl intensity of air flow and the size of recirculation zones increase slightly. In the central region of the burner, as the OFA damper opening widens, the gas temperature and CO concentration increase, while the O{sub 2} concentration, NOx concentration, coal burnout, and release rates of components (C, H, and N) decrease, and coal particles ignite earlier. In the secondary air region of the burner, the O{sub 2} concentration, NOx concentration, coal burnout, and release rates of components (C, H, and N) decrease, and the gas temperature and CO concentration vary slightly. In the sidewall region, the gas temperature, O{sub 2} concentration, and NOx concentration decrease, while the CO concentration increases and the gas temperature varies slightly. The furnace temperature and heat flux in the main burning region decrease appreciably, but increase slightly in the burnout region. The NOx emission decreases from 1203.6 mg/m{sup 3} (6% O{sub 2}) for a damper opening of 0% to 511.7 mg/m{sup 3} (6% O{sub 2}) for a damper opening of 80% and the boiler efficiency decreases from 92.59 to 91.9%. 15 refs., 17 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Reactivity of alkaline lignite fly ashes towards CO{sub 2} in water

The reaction kinetics between alkaline lignite fly ashes and CO{sub 2} (pCO{sub 2} = 0.01-0.03 MPa) were studied in a laboratory CO{sub 2} flow-through reactor at 25-75{sup o}C. The reaction is characterized by three phases that can be separated according to the predominating buffering systems and the rates of CO{sub 2} uptake. Phase I (pH > 12, < 30 min) is characterized by the dissolution of lime, the onset of calcite precipitation and a maximum uptake, the rate of which seems to be limited by dissolution of CO{sub 2}. Phase II (pH < 10.5, 10-60 min) is dominated by the carbonation reaction. CO{sub 2} uptake in phase III (pH < 8.3) is controlled by the dissolution of periclase (MgO) leading to the formation of dissolved magnesium-bicarbonate. Phase I could be significantly extended by increasing the solid-liquid ratios and temperature, respectively. At 75{sup o}C the rate of calcite precipitation was doubled leading to the neutralization of approximately 0.23 kg CO{sub 2} per kg fly ash within 4.5 h, which corresponds to nearly 90% of the total acid neutralizing capacity. 21 refs., 5 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

The washability of lignites for clay removal

In the washability research of the Seyitomer Lignites (Kutahya-Turkey), with lower calorific value (1,863 kcal/kg) and high ash content (51.91%), by heavy medium separation, it was found out that middling clay in the coal had an effect to change the medium density. To prevent this problem, a trommel sieve with 18 and 5 mm aperture diameter was designed, and the clay in the coal was tried to be removed using it before the coal was released to heavy medium. Following that, the obtained coal in -100 + 18 mm and -18 + 5 mm fractions was subjected to sink and float test having 1.4 gcm{sup -3} and 1.7 gcm{sup -3} medium densities (-5 mm fraction will be evaluated in a separate work). Depending on the raw coal, with the floating of -100 + 18 mm and -18 + 5 mm size fraction in 1.4 gcm{sup -3} medium density, clean coal with 60.10% combustible matter recovery, 19.12% ash, and 3,150 kcal/kg was obtained. Also floating of the samples sinking in 1.4 gcm{sup -3} in the medium density (1.7 gcm{sup -3}), middling with 18.70% combustible matter recovery, 41.93% ash, 2,150 kcal/kg, and tailing having 78.31% ash were obtained.

01 COAL, LIGNITE, AND PEAT↗

Assessment of Lignite Quality Variables: A Practical Approach with Sequential Gaussian Simulation

Traditional mine planning methods based on block models built with interpolation techniques such as inverse distance and kriging are inadequate in assessing the uncertainty associated with the technological parameters of coal deposit variables, which are modeled for short-range mine planning because of smoothing effects. However, simulation methods aim at reproducing in situ quality variability and spatial continuity of the attributes of interest. This study outlines the spatial distribution and uncertainty of quality variables at the Tufanbeyli (Adana-Turkey) lignite deposit using a probabilistic approach. A practical approach was based on geostatistical sequential Gaussian simulation (SGS) used to yield a series of conditional images characterized by equally probable spatial distributions of the quality parameters across the deposit. Post processing of many simulations allowed the mapping of maximum/minimum limits for quality values and provided a model for the uncertainty in the spatial distribution of the quality parameters. SGS was validated by a number of tests such as descriptive statistics, histogram, and variogram reproductions. The advantages of SGS were practically illustrated through the case study. The simulated models can be incorporated into mine planning and scheduling.

01 COAL, LIGNITE, AND PEAT↗

Oxidative desulfurization of Cayirhan lignites by permanganate solution

Unless important developments record new and renewable energy sources, the role of fossil fuels as an energy resource goes on. It is possible to detect sulfur, heavy metals, and tracer elements such as arsenic and selenium by decreasing calorific value of coals. Sulfur oxides, which are the main pollutants in atmosphere, are irritative to humans and plants, and erosion occurs on buildings. Although there are high lignite reservoirs, high sulfur content limits the efficient use of them. In this research, it is aimed to convert combustible sulfur in coal to non-combustible sulfur form in the ash by oxidizing it with permanganate solution. During this research, the effect of two different parameters of potassium permanganate concentration, processing time, and mean particle size were investigated at constant room temperature and shaking rate. The conversion of combustible sulfur to non-combustible sulfur form was achieved optimally with 0.14 M potassium permanganate solution, 0.1 mm mean particle size at 16 h of treatment time, and the combustible sulfur amount was decreased by 46.37% compared to undoped conditions.

01 COAL, LIGNITE, AND PEAT↗

Recovery and Refining of Rare Earth Elements from Lignite Mine Wastes

The University of North Dakota (UND), in collaboration with a comprehensive team of technical, business and host-site partners, built on prior technology development to complete a front-end engineering and design (FEED) and business planning study to recover and refine rare earth elements (REE) and critical minerals (CM) from North Dakota (ND) lignite mine wastes. The end of project goal was to have an investment quality project and a committed team ready to commercialize the proposed technologies in a future construction and operations phase.

01 COAL, LIGNITE, AND PEAT↗

Swelling of lignites in organic solvents

Data on the swelling of Turkish lignites can be summarized using linear multiparameter equations that take into account various properties of solvents. Factors responsible for the amounts of absorbed solvents are the basicity and cohesion energy density of the solvents.

01 COAL, LIGNITE, AND PEAT↗

Transformation of alkali metals during pyrolysis and gasification of a lignite

Transformation of Na and K in a lignite was investigated during pyrolysis and gasification in a fixed-bed by using a serial dissolution method with H{sub 2}O, CH{sub 3}COONH{sub 4}, and HCl solutions. The evolution of the fractions of four forms in solid and alkali volatilization during pyrolysis and gasification was determined. The results show that a different mode of occurrence between Na and of K in coal existed. Na in coal can be nearly completely dissolved by H{sub 2}O, CH{sub 3}COONH{sub 4}, and HCl solution. However, K in coal exists almost in the stable forms. Both H{sub 2}O soluble and CH{sub 3}COONH{sub 4} soluble Na and K fractions decline during pyrolysis and early gasification stage and increase a little with the process of char gasification. The stable form Na in the char produced during pyrolysis is transferred to other forms during char gasification via the pore opening and a series of chemical reactions. Na{sub 2}SO{sub 4} (K{sub 2}SO{sub 4}) may play an important role in producing stable forms such as Na{sub 2}O.Al{sub 2}O{sub 3}2SiO{sub 2} and K{sub 2}O.Al{sub 2}O{sub 3}.2SiO{sub 2} during pyrolysis. The fraction of HCl soluble K increases during pyrolysis but decreases markedly during the early gasification stage. 20 refs., 7 figs., 1 tabs.

01 COAL, LIGNITE, AND PEAT↗

A model of devolatilization behavior in lignite pyrolysis with solid heat carriers

To elucidate the influence of the process conditions on pyrolytic products, the interactions between transport phenomena and pyrolysis kinetics are quantitatively analyzed at the level of a single coal particle. A comprehensive mathematical model is formulated to predict intraparticle multiphysics and devolatilization behaviors; the model contains two correlative one–dimensional unsteady heat conservation equations and ternary mass conservation equations in conjunction with the simplified dusty–gas model. Moreover, a multistep kinetic model of coal devolatilization is adopted to predict the generating rates of the lumped pyrolytic products. Validation of the model against experimental and literature data showed that can predict the transient temperature profiles of a coal particle and the yields of volatiles. Finally, the effects of the main process conditions on the intra– and extra–temperature history of lignite during pyrolysis with solid heat carriers are analyzed. Here, the interactions between physical transport and the pyrolysis reaction are also examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Mine, Dakota Lignite Coal, Operations

Based on a compilation of mines, a surface mine for Dakota lignite coal, producing ~6 billion kg of coal per year. Assumes 5.6 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates; LHV=6730 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=8120D121-53E9-4EF9-ACA1-47FD7005BDC8

01 COAL, LIGNITE, AND PEAT↗

Surface Mine, East Interior Lignite Coal, Operations

Based on a compilation of mines, a surface mine for East Interior lignite coal, producing ~6 billion kg of coal per year. Assumes 32.2 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates, LHV=6860 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=EA68BD9B-501B-41EE-8B6B-A558AD3E8CF4

01 COAL, LIGNITE, AND PEAT↗

Surface Mine, Gulf Lignite Coal, Operations

Based on a compilation of mines, a surface mine for Gulf lignite coal, producing ~6 billion kg of coal per year. Assumes 39.9 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates, LHV=6440 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=67624B28-C003-4E97-8703-800D00E5EE37

01 COAL, LIGNITE, AND PEAT↗