Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIBS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Surface Monitoring of CFRP Structures for Adhesive Bonding

Adhesive bonding of composite materials requires reliable monitoring and detection of surface contaminants to assure robust and durable bonded structures. Surface treatment and effective monitoring prior to bonding is essential in order to obtain a surface free from contaminants that may degrade structural performance. Two techniques which monitor the effectiveness of the laser surface treatment of carbon fiber reinforced polymer (CFRP) materials are being investigated: laser induced breakdown spectroscopy (LIBS) and optically stimulated electron emission (OSEE). The applicability of LIBS to detect silicone contaminants on CFRP composites is studied using ~35 ns Nd:YAG laser pulses at 355 nm with a pulse energy of 45 mJ. The LIBS regime in which pulse energies are < 100 mJ is referred to as mLIBS. CFRP surfaces were contaminated with polydimethylsiloxane (PDMS), a major component of silicone based mold release agents. The presence of PDMS is found by inspecting the Si I emission line at 288.2 nm. Untreated CFRP samples and CFRP contaminated with PDMS were tested. The PDMS areal density ranged from 0.36 Â+/- 0.04 to 0.51 Â+/- 0.16 mg/cm2. The results demonstrate the successful detection of PDMS on CFRP using mLIBS. In addition, OSEE was used to measure CFRP surface cleanliness pre- and post-treatment by laser ablation on specimens contaminated with PDMS coatings from 8 nm to 1311 nm in thickness. The results showed a significant increase in the OSEE photocurrent after laser surface treatment.

Ledesma, Rodolfo↗
NASA NTRS2017

Surface Characterization of Carbon Fiber Reinforced Polymers by Picosecond Laser Induced Breakdown Spectroscopy

Adhesive bonding of composite materials requires reliable monitoring and detection of surface contaminants as part of a vigorous quality control process to assure robust and durable bonded structures. Surface treatment and effective monitoring prior to bonding are essential in order to obtain a surface which is free from contaminants that may lead to inferior bond quality. In this study, the focus is to advance the laser induced breakdown spectroscopy (LIBS) technique by using pulse energies below 100 μJ (μLIBS) for the detection of low levels of silicone contaminants in carbon fiber reinforced polymer (CFRP) composites. Various CFRP surface conditions were investigated by LIBS using ∼10 ps, 355 nm laser pulses with pulse energies below 30 μJ. Time-resolved analysis was conducted to optimize the gate delay and gate width for the detection of the C I emission line at 247.9 nm to monitor the epoxy resin matrix of CFRP composites and the Si I emission line at 288.2 nm for detection of silicone contaminants in CFRP. To study the surface sensitivity to silicone contamination, CFRP surfaces were coated with polydimethylsiloxane (PDMS), the active ingredient in many mold release agents. The presence of PDMS was studied by inspecting the Si I emission lines at 251.6 nm and 288.2 nm. The measured PDMS areal densities ranged from 0.15 to 2 μg/cm(sup 2). LIBS measurements were performed before and after laser surface ablation. The results demonstrate the successful detection of PDMS thin layers on CFRP using picosecond μLIBS.

Rodolfo Ledesma↗
NASA NTRSDate not supplied

A Mars 2020 Perseverance SuperCam Perspective on the Igneous Nature of the Máaz Formation at Jezero Crater, Mars

The Mars2020 Perseverance rover landed in Jezero crater in February 2020,and first encountered the Máaz formation (or Crater floor-fractured rough(Cf-fr) unit previously mapped based on orbital data[1]).In this study, we use data from the SuperCam instrument(SCAM) to show that the Máaz formation has an igneous origin. SuperCam is a remote-sensing instrument onboard Perseverance, and investigates the texture, mineralogy, and chemistry of rocks and soils, as well as atmospheric features [2,3]. SuperCam comprises the Remote Micro Imager (RMI) to provide high-resolution images, laser-induced breakdown spectroscopy (LIBS)to investigate the major and minor element chemistry of materials, Raman, and passive visible-near infrared (VISIR) spectroscopy to analyze the mineralogy of targets, and time-resolved luminescence spectroscopy (TRLS)to measure organic fluorescence and inorganic luminescence. In addition, the microphone (MIC) can constrain the rock hardness through measurements of the shockwave of LIBS shots. In this study, we use LIBS-based major-oxide compositions (MOC),quantified using the calibration in [2].

Mars 2020↗
NASA NTRSDate not supplied

Material Property Estimation in Thin Battery Components Using Guided Wave Measurement, Experimental Dispersion Curve Extraction and Finite Element Modeling

At NASA, we are investigating nondestructive evaluation (NDE) and structural health monitoring (SHM) techniques to detect precursors of thermal runaway failure in lithium metal based lithium ion batteries (LIB). The approach is centered on computational simulation models to guide inspection and aid in interpretation of results. Since lithium metal LIBs have combinations of solid and fluid-filled porous materials, obtaining accurate material properties is both challenging and critical for successful simulation of battery inspection. To this end, we investigated a multi-verification approach for material characterization of thin battery components. First, a laser Doppler vibrometer (LDV) was used to measure guided wave fields in thin (microns-thick) battery components subject to broadband excitation. The time-space wavefield data was converted to frequency-wave number data to extract guided wave dispersion curves. A data visualization and post processing graphics user interface (GUI) was developed at NASA to aid the data exploration and analysis. Due to the thinness of the samples, low frequency-thickness-product plate wave approximations allowed for the calculation of closed-form solutions for material elastic property estimation. These approximations were then verified by calculating the Lamb wave solutions using the previously obtained material properties. Finally, the estimated elastic material properties were implemented in a COMSOL simulation model, and dispersion curves were extracted from simulation results. The dispersion curves and derived material properties were then compared to the analysis results from the experimental data. These comparisons informed on the accuracy of the measured material properties and helped demonstrate the accuracy of the finite element analysis (FEA) computational models. This assessment will prove vital when we start simulating more complex multi-layer components and poroelastic media. This paper gives a brief background of the problem space, outlines the workflow for data analysis and verification, shows results from the workflow, and gives an overview of future plans for simulation of lithium metal LIB inspection.

Peter Juarez↗
NASA NTRS2024

High Precision and Spatial Resolution Chemical Interrogation of Planetary Materials Using fs-LA/LIBS in Tandem With Multi-Collector ICP-MS

Combining femtosecond laser ablation (fs-LA) with laser-induced breakdown spectroscopy (LIBS), together with multi-collector inductively coupled plasma mass spectrometry (MC-ICPMS), can provide remarkable insights into the composition, structure, and therefore geologic history of planetary materials and their terrestrial analogs. Using the Applied Spectra iX-fs-Tandem LA-LIBS Instrument and the Nu SP1700 MC-ICP-MS housed within the Center for Isotope Cosmochemistry and Geochronology at NASA Johnson Space Center, we present preliminary tandem fs-LA-(MC)-ICP-MS/LIBS measurements of planetary analog materials. The synergistic integration of fs-LA-LIBS offers high spatial resolution elemental mapping, enabling the identification of microscale variations within samples. Simultaneously, the MC-ICP-MS can deliver precise isotopic analyses, and integrating the two datasets yields a wealth of geochemical information for a given sample. LA-based chemical mapping experiment designs are contingent on the information sought (i.e., quantitative, or semi-quantitative) and the preferred or available volume of material removed for the analysis. For example, occasionally, there are significant limitations in the depth of ablation due to the sample value, the amount of material available, or simply the need to coordinate with other in-situ techniques. In these limited sample scenarios, the “depth-controlled” chemical maps allow for precise post-mapping ion-polishing of the sample, while the isotopic and elemental maps can be used for targeting future analyses (e.g., conventional LA analyses, SIMS analyses, and micro milling for solution ICP-MS/TIMS). The emerging methodology will establish a powerful tool for investigation of astromaterials and materials returned by future planetary sample science missions.

Jacob B Setera↗
NASA NTRS2017

Unreported Emission Lines of Rb, Ce, La, Sr, Y, Zr, Pb and Se Detected Using Laser-Induced Breakdown Spectroscopy

Information on emission lines for major and minor elements is readily available from the National Institute of Standards and Technology (NIST) as part of the Atomic Spectra Database. However, tabulated emission lines are scarce for some minor elements and the wavelength ranges presented on the NIST database are limited to those included in existing studies. Previous work concerning minor element calibration curves measured using laser-induced break-down spectroscopy found evidence of Zn emission lines that were not documented on the NIST database. In this study, rock powders were doped with Rb, Ce, La, Sr, Y, Zr, Pb and Se in concentrations ranging from 10 percent to 10 parts per million. The difference between normalized spectra collected on samples containing 10 percent dopant and those containing only 10 parts per million were used to identify all emission lines that can be detected using LIBS (Laser-Induced Breakdown Spectroscopy) in a ChemCam-like configuration at the Mount Holyoke College LIBS facility. These emission spectra provide evidence of many previously undocumented emission lines for the elements measured here.

LIBS↗
NASA NTRS1976

Possible Mg II emission in B stars observed from Copernicus

Four B stars, Alpha Vir, Beta Cen, Alpha Gru, and Beta Lib, were observed with the Copernicus spectrometer at a resolution of 0.1 A in order to investigate the presence of chromospheric emission. Emission was observed in Beta Cen and Alpha Gru, while the results for Alpha Vir and Beta Lib were inconclusive.

Kondo, Y.↗
NASA NTRS1984

The FK Comae candidate UX Librae

New optical spectroscopic and photometric data are presented for the active chromosphere FK Com candidate UZ Lib. The star is shown to have an extremely large photometric amplitude in V of 0.35 mag, and its rotation period is established as 4.75 + or - 0.01 days. The optical spectrum is that of an early K giant, broadened by a rotation velocity of approximately 65 km/s. H-alpha is visible as a very broad emission feature, with a profile resembling that seen in FK Com. The emission intensity and profile are variable over the rotation period, with the strongest emission present at photometric minimum, in accord with dark starspot models. The photospheric absorption line profiles show variable asymmetries and distortions which are interpreted as due to the effects of the dark starspot rotating across the line of sight. New radial velocity measures are combined with published data to demonstrate the UZ Lib is a member of a binary system in synchronous rotation with a secondary of mass approximately 0.5 solar masses. This information is considered in light of the conflicting models for the origin of the optical and spectral variability of the FK Com stars, as well as their uncertain evolutionary status.

Bopp, B. W.↗
NASA NTRS1984

Observations of eight close binaries with the Einstein Observatory

Eight close binaries were observed with the Imaging Proportional Counter aboard the Einstein Observatory. The binaries R Ara, Zeta Aur, RZ Cas, 31 Cyg, Delta Lib, U Sge, RZ Sct, and RW Tau all show strong indications of active mass flow in their ground-based and/or ultraviolet spectra. The systems R Ara, RZ Cas, 31 Cyg, Delta Lib, and U Sge were detected as X-ray sources while only upper limits on the X-ray luminosities of Zeta Aur, RZ Sct, and RW Tau could be determined. Nondetection of the latter three is probably attributable to their distance. With the exception of 31 Cyg which has an X-ray luminosity of about 10 to the 32nd erg/s, the detected sources have X-ray luminosities in the range 10 to the 30th-31st erg/s. These luminosities are approximately equal to those observed for single stars of similar spectral types. It appears that the X-ray luminosity of 31 Cyg is at least 60 times higher than that of Zeta Aur.

Mccluskey, G. E., Jr.↗
NASA NTRS1989

First detection of the astrometric orbit of the single-lined spectroscopic binary epsilon Librae

The Multichannel Astrometric Photometer of the University of Pittsburgh's Allegheny Observatory was used to successfully measure for the first time the astrometric orbit of the single-lined spectroscopic binary epsilon Lib. Solution of the orbit indicates that the secondary component is a 0.5-solar-mass star, assuming that the F5 IV primary is 1.3 solar mass. If the secondary is on the main sequence, then it is later than a K5 star, but earlier than an M2 star. In addition to detection of the astrometric orbit of epsilon Lib, two references stars used in the observations, AO 754 and AO 755, are found to be a common-proper-motion pair.

Castelaz, Michael W.↗
NASA NTRS1992

Observations of stimulated Raman scattering and laser-induced breakdown in millimeter-sized droplets

We report the first observations, to our knowledge, of nonlinear optical effects in large (millimeter-sized) droplets. Stimulated Raman scattering (SRS) and laser-induced breakdown (LIB) are simultaneously observed in acoustically levitated millimeter-sized glycerol droplets irradiated by either a frequency-doubled (532-nm) or a frequency-tripled (355-nm) Nd:YAG laser. The two processes, which occur above a nearby coincident irradiation threshold, are conjectured to arise from a common initiation mechanism: self-focusing. LIB generates vapor bubbles within the droplet, resulting in the quenching of SRS emission.

Biswas, A.↗
NASA NTRS1995

A study of coronal X-ray emission from short-period Algol binaries

A study of X-ray emission from five short-period Algol-type binaries based on observations with Advanced Satellite for Cosmology and Astrophysics (ASCA) and ROSAT is presented. We have observed RZ Cas with both satellites, and beta Per, U Cep, delta Lib, and TW Dra with ROSAT. Significant intensity variations are seen in the X-ray emission from RZ Cas, U Cep, TW Dra, and delta Lib. These variations seem unrelated to the eclipsing behavior of these systems and are probably due to either rotational modulation of compact active regions on the surfaces of the chromospherically active secondary components or to flaring activity in the systems. The spectra of all but one of the systems require the presence of at least two discrete plasma components with different temperatures (0.6 - 0.7 keV, and approximately 2 keV) and the abundances of the medium-Z elements 20% - 50% of the solar photospheric values. The high resolving power and signal-to-noise ratio of the ASCA spectra allow us to individually constrain the coronal abundances of O, Ne, Mg, Si, S, and Fe in RZ Cas. We demonstrate that, if we use the elemental abundances and temperatures obtained from the analysis of their ASCA spectra as (fixed) inputs, to fit the ROSAT PSPC spectra well requires the presence of a third component (kT approximately 0.2 - 0.3 keV) in RZ Cas and beta Per. A continuous emission measure model of the power-law type (EM(T) variesas (T/T(sub max)(sup alpha)) generally gives a poor fit to the ASCA and ROSAT data on most sources. Circumstellar or circumbinary absorbing matter seems to be present in some of these systems, as indicated by the variable total column density needed to fit their X-ray spectra.

Singh, K. P.↗
NASA NTRS2003

Development and Testing of Laser-induced Breakdown Spectroscopy for the Mars Rover Program: Elemental Analyses at Stand-Off Distances

One of the most fundamental pieces of information about any planetary body is the elemental composition of its surface materials. The Viking Martian landers employed XRF (x-ray fluorescence) and the MER rovers are carrying APXS (alpha-proton x-ray spectrometer) instruments upgraded from that used on the Pathfinder rover to supply elemental composition information for soils and rocks to which direct contact is possible. These in- situ analyses require that the lander or rover be in contact with the sample. In addition to in-situ instrumentation, the present generation of rovers carry instruments that operate at stand-off distances. The Mini-TES is an example of a stand-off instrument on the MER rovers. Other examples for future missions include infrared point spectrometers and microscopic-imagers that can operate at a distance. The main advantage of such types of analyses is obvious: the sensing element does not need to be in contact or even adjacent to the target sample. This opens up new sensing capabilities. For example, targets that cannot be reached by a rover due to impassable terrain or targets positioned on a cliff face can now be accessed using stand-off analysis. In addition, the duty cycle of stand-off analysis can be much greater than that provided by in-situ measurements because the stand-off analysis probe can be aimed rapidly at different features of interest eliminating the need for the rover to actually move to the target. Over the past five years we have been developing a stand-off method of elemental analysis based on atomic emission spectroscopy called laser-induced breakdown spectroscopy (LIBS). A laser-produced spark vaporizes and excites the target material, the elements of which emit at characteristic wavelengths. Using this method, material can be analyzed from within a radius of several tens of meters from the instrument platform. A relatively large area can therefore be sampled from a simple lander without requiring a rover or sampling arms. The placement of such an instrument on a rover would allow the sampling of locations distant from the landing site. Here we give a description of the LIBS method and its advantages. We discuss recent work on determining its characteristics for Mars exploration, including accuracy, detection limits, and suitability for determining the presence of water ice and hydrated minerals. We also give a description of prototype instruments we have tested in field settings.

D A Cremers↗
NASA NTRS2006

20V, 40 Ah Lithium Ion Polymer Battery for the Spacesuit

Objective: Consider a new battery design for EMU. Results: a) Electrovaya s aerospace cell production line is improving, but must further improve to achieve acceptable reliability; b) Completed functional, vibration, and thermal cycling of LIB; c) So far, electrical safety tests have produced good results; d) Completed functional, vibration, thermal cycling, power quality and EMI of LIB Charger; e) Completed CDR on 9/23/04; and f) Manufacturing Readiness Review for flight cell/battery production scheduled for Dec 04.

Darcy, Eric↗
NASA NTRS2008

Status of Terra and Aqua MODIS Instruments

Currently, two nearly identical MODIS instruments are operating in space: one on the Terra spacecraft launched in December 1999 and another on the Aqua spacecraft launched in May 2002. MODIS has 36 spectral bands with wavelengths covering from visible (VIS) to long-wave infrared (LWIR). Since launch, MODIS observations and data products have contributed significantly to studies of changes in the Earth system of land, oceans, and atmosphere. To maintain its on-orbit calibration and data product quality, MODIS was built with a comprehensive set of on-board calibrators, consisting of a solar diffuser (SD) and a solar diffuser stability monitor (SDSM) for the reflective solar bands (RSB) and an on-board blackbody (BB) for the thermal emissive bands (TEB). Both instruments have demonstrated good performance. The primary Level 1 B (LIB) data products are top of the atmosphere (TOA) reflectance for RSB and radiance for TEB This paper provides an overview of MODIS calibration methodologies, activities, lifetime on-orbit performance and challenging issues for each MODIS, the impact on LIB product quality, and lessons learned for future sensors such as the NPOESS VIIRS.

Xiong, Xiaoxiong↗
NASA NTRS2010

Development of an e-VLBI Data Transport Software Suite with VDIF

We have developed a software library (KVTP-lib) for VLBI data transmission over the network with the VDIF (VLBI Data Interchange Format), which is the newly proposed standard VLBI data format designed for electronic data transfer over the network. The software package keeps the application layer (VDIF frame) and the transmission layer separate, so that each layer can be developed efficiently. The real-time VLBI data transmission tool sudp-send is an application tool based on the KVTP-lib library. sudp-send captures the VLBI data stream from the VSI-H interface with the K5/VSI PC-board and writes the data to file in standard Linux file format or transmits it to the network using the simple- UDP (SUDP) protocol. Another tool, sudp-recv , receives the data stream from the network and writes the data to file in a specific VLBI format (K5/VSSP, VDIF, or Mark 5B). This software system has been implemented on the Wettzell Tsukuba baseline; evaluation before operational employment is under way.

Sekido, Mamoru↗
NASA NTRS2011

Galex and Optical Observations of GW Librae during the Long Decline from Superoutburst

The prototype of accreting, pulsating white dwarfs (GW Lib) underwent a large amplitude dwarf nova outburst in 2007. We used ultraviolet data from Galaxy Evolution Explorer and ground-based optical photometry and spectroscopy to follow GW Lib for three years following this outburst. Several variations are apparent during this interval. The optical shows a superhump modulation in the months following outburst, while a 19 minute quasi-periodic modulation lasting for several months is apparent in the year after outburst. A long timescale (about 4 hr) modulation first appears in the UV a year after outburst and increases in amplitude in the following years. This variation also appears in the optical two years after outburst but is not in phase with the UV. The pre-outburst pulsations are not yet visible after three years, likely indicating the white dwarf has not returned to its quiescent state.

NOVAE↗
NASA NTRS2015

Diagenetic Features Analyzed by ChemCam/Curiosity at Pahrump Hills, Gale Crater, Mars

Onboard the Mars Science Laboratory (MSL) Curiosity rover, the ChemCam instrument consists of : (1) a Laser-Induced Breakdown Spectrometer (LIBS) for elemental analysis of targets and (2) a Remote Micro Imager (RMI), which provides imaging context for the LIBS. The LIBS/ChemCam performs analysis typically of spot sizes 350-550 micrometers in diameter, up to 7 meters from the rover. Within Gale crater, Curiosity traveled from Bradbury Landing toward the base of Mount Sharp, reaching Pahrump Hills outcrop circa sol 750. This region, as seen from orbit, represents the first exposures of lower Mount Sharp. In this abstract we focus on two types of features present within the Pahrump Hills outcrop: concretion features and light-toned veins.

Nachon, M.↗