Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEAD 210”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Melt-Processed Halide Perovskite Thin Films from a Two-Dimensional Ruddlesden–Popper Phase Precursor

While halide perovskite thin films have enormous potential for photovoltaics and other optoelectronics, the use of environmentally hazardous solvents during their deposition and processing poses a barrier to their commercialization. In this work, we demonstrated the deposition of melt-processable precursors and subsequent transformation into halide perovskite thin films without using environmentally hazardous solvents. We melted the wide-bandgap layered perovskites [(C 6 H 5 CH(CH 3 )CH 2 NH 3 ) 2 PbI 4 :β-Me-PEA 2 PbI 4 ] at ~210 °C and blade coated them into films. The β-Me-PEA 2 PbI 4 films were subsequently transformed to perovskite-phase methylammonium or formamidinium lead iodide films using a cation-exchange process in an alcohol-based solvent. Lastly, we demonstrate the potential and limitations of a completely solvent-free approach that uses solid-state transformation of a β-Me-PEA 2 PbI 4 film. As a result, this work represents a substantial step toward eliminating environmentally hazardous solvents and enables inexpensive industrial-scale liquid-phase deposition processes that do not require expensive systems for handling and disposing of environmentally hazardous solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Effect of graphene on plasmonic metasurfaces at infrared wavelengths

Significant enhancement of infrared transmittance by the presence of a graphene layer on a plasmonic metasurface (PLM) has been demonstrated. PLMs with different configurations were fabricated, and their transmittance with and without graphene was compared. Selective enhancement by graphene occurred at the plasmon resonance wavelength. The degree of enhancement was found to depend on the width of the gap between the periodic metal regions in the PLM. A maximum enhancement of ∼210% was achieved at a wavelength of 10 μm. The ability to achieve such a drastic increase in transmittance at the plasmon resonant wavelength is expected to lead to improvements in the performance of energy collecting devices and optical sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2015

Beam’s-eye-view imaging during non-coplanar lung SBRT

Purpose: Beam’s-eye-view (BEV) imaging with an electronic portal imaging device (EPID) can be performed during lung stereotactic body radiation therapy (SBRT) to monitor the tumor location in real-time. Image quality for each patient and treatment field depends on several factors including the patient anatomy and the gantry and couch angles. The authors investigated the angular dependence of automatic tumor localization during non-coplanar lung SBRT delivery. Methods: All images were acquired at a frame rate of 12 Hz with an amorphous silicon EPID. A previously validated markerless lung tumor localization algorithm was employed with manual localization as the reference. From ten SBRT patients, 12 987 image frames of 123 image sequences acquired at 48 different gantry–couch rotations were analyzed. δ was defined by the position difference of the automatic and manual localization. Results: Regardless of the couch angle, the best tracking performance was found in image sequences with a gantry angle within 20° of 250° (δ = 1.40 mm). Image sequences acquired with gantry angles of 150°, 210°, and 350° also led to good tracking performances with δ = 1.77–2.00 mm. Overall, the couch angle was not correlated with the tracking results. Among all the gantry–couch combinations, image sequences acquired at (θ = 30°, ϕ = 330°), (θ = 210°, ϕ = 10°), and (θ = 250°, ϕ = 30°) led to the best tracking results with δ = 1.19–1.82 mm. The worst performing combinations were (θ = 90° and 230°, ϕ = 10°) and (θ = 270°, ϕ = 30°) with δ > 3.5 mm. However, 35% (17/48) of the gantry–couch rotations demonstrated substantial variability in tracking performances between patients. For example, the field angle (θ = 70°, ϕ = 10°) was acquired for five patients. While the tracking errors were ≤1.98 mm for three patients, poor performance was found for the other two patients with δ ≥ 2.18 mm, leading to average tracking error of 2.70 mm. Only one image sequence was acquired for all other gantry–couch rotations (δ = 1.18–10.29 mm). Conclusions: Non-coplanar beams with gantry–couch rotation of (θ = 30°, ϕ = 330°), (θ = 210°, ϕ = 10°), and (θ = 250°, ϕ = 30°) have the highest accuracy for BEV lung tumor localization. Additionally, gantry angles of 150°, 210°, 250°, and 350° also offer good tracking performance. The beam geometries (θ = 90° and 230°, ϕ = 10°) and (θ = 270°, ϕ = 30°) are associated with substantial automatic localization errors. Overall, lung tumor visibility and tracking performance were patient dependent for a substantial number of the gantry–couch angle combinations studied.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

High Thermoelectric Performance in 2D Sb 2 Te 3 and Bi 2 Te 3 Nanoplate Composites Enabled by Energy Carrier Filtering and Low Thermal Conductivity

Thermoelectrics are an important class of materials with great potential in alternative energy applications. In this study, two-dimensional (2D) nanoplates of the layered chalcogenides, Sb 2 Te 3 and Bi 2 Te 3 , are synthesized and composites of the two are investigated for their thermoelectric properties. The two materials, Sb 2 Te 3 and Bi 2 Te 3 , were synthesized as hexagonal, 2D nanoplates via a colloidal polyol route. The as-synthesized Sb 2 Te 3 and Bi 2 Te 3 vary drastically from one another in their lateral and vertical dimensions as revealed by scanning electron microscopy and atomic force microscopy. The single crystalline nanoplate nature is deduced by high-resolution transmission electron microscopy and selected area electron diffraction. Nanoplates have well-defined hexagonal facets as seen in the scanning and transmission electron microscopy images. The nanoplates were consolidated as an anisotropic nanostructured pellet via spark plasma sintering. Preferred orientation observed in the powder X-ray diffraction pattern and scanning electron microscopy images of the fractured pellets confirm the anisotropic structure of the nanoplates. Thermoelectric properties in the parallel and perpendicular directions were measured, revealing strong anisotropy with a significant reduction to thermal conductivity in the perpendicular direction due to increased phonon scattering at nanoplate interfaces. All compositions, except that of the 25% Bi 2 Te 3 nanoplate composite, behave as degenerate semiconductors with increasing electrical resistivity as the temperature increases. The Seebeck coefficient is also increased dramatically in the nanocomposites, the highest reaching 210 μV/K for 15% Bi 2 Te 3 . The increase in Seebeck is attributed to energy carrier filtering at the nanoplate interfaces. Overall, these enhanced thermoelectric properties lead to a drastic increase in the thermoelectric performance in the perpendicular direction, with zT ~ 1.26, for the 15% Bi 2 Te 3 nanoplate composite at 450 K.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Excitations of one-valence-proton, one-valence-neutron nucleus {sup 210}Bi from cold-neutron capture

The low-spin structure of one-proton, one-neutron {sup 210}Bi nucleus was investigated in cold-neutron capture reaction on {sup 209}Bi. The γ-coincidence measurements were performed with use of EXILL array consisted of 16 HPGe detectors. The experimental results were compared to shell-model calculations involving valence particles excitations. The {sup 210}Bi nucleus offers the potential to test the effective proton-neutron interactions because most of the states should arise from the proton-neutron excitations. Additionally, it was discovered that a few states should come from the couplings of valence particles to the 3{sup −} octupole vibration in {sup 208}Pb which provides also the possibility of testing the calculations involving the core excitations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Accelerating fields up to 49 MV/m in TESLA-shape superconducting RF niobium cavities via 75C vacuum bake

In this paper we present the discovery of a new surface treatment applied to superconducting radio frequency (SRF) niobium cavities, leading to unprecedented accelerating fields of 49 MV/m in TESLA-shaped cavities, in continuous wave (CW); the corresponding peak magnetic fields are the highest ever measured in CW, about 210 mT. For TESLA-shape cavities the maximum quench field ever achieved was ~45 MV/m - reached very rarely- with most typical values being below 40 MV/m. These values are reached for niobium surfaces treated with electropolishing followed by the so called mild bake, a 120C vacuum bake (for 48 hours for fine grain and 24 hours for large grain surfaces). We discover that the addition during the mild bake of a step at 75C for few hours, before the 120C, increases systematically the quench fields up to unprecedented values of 49 MV/m. The significance of the result lays not only in the relative improvement, but in the proof that niobium surfaces can sustain and exceed CW radio frequency magnetic fields much larger than Hc1, pointing to an extrinsic nature of the current field limitations, and therefore to the potential to reach accelerating fields well beyond the current state of the art.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

Robust Ag nanoplate ink for flexible electronics packaging

Nanoinks are currently a topic of heightened interest with respect to low temperature bonding processes and printable electronics. We have developed an innovative polyvinylpyrrolidone (PVP)-stabilized Ag nanoplate ink amenable to very strong low temperature packaging, and investigated the relationship between bonding strength and electrical conductivity post-bonding. PVP shell plastic deformations observed in failure microcracks with the formation of PVP nanofibers, revealed bonding strength at low temperatures (<250 °C) was primarily due to adhesive bonding. Here, it is found that, utilizing photonic sintering, ~70 °C reduction of transformation temperature from adhesive to metallic bonding was achieved compared to that of thermal sintering. A numerical simulation was developed to better understand the influences of the light-induced heat generation, which demonstrated near-infrared light can facilitate sintering. Bonding strengths of 27 MPa were achieved at room temperatures, and 29.4 MPa at 210 °C with photonic sintering. Moreover, the anisotropic resistivity was observed with different thermal dependences. Furthermore, these results demonstrate Ag nanoplate inks have potential for low temperature 3D interconnections in lead-free microcircuits, flexible electronic packaging, and diverse sensing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

An Analysis of Frenkel Defects and Backgrounds Modeling for SuperCDMS Dark Matter Searches

Years of astrophysical observations suggest that dark matter comprises more than $\sim$ 80 % of all matter in the universe. Particle physics theories favor a weakly-interacting particle that could be directly detected in terrestrial experiments. The Super Cryogenic Dark Matter Search (SuperCDMS) Collaboration operates world-leading experiments to directly detect dark matter interacting with ordinary matter. The SuperCDMS Soudan experiment searched for weakly interacting massive particles (WIMPs) via their elastic-scattering interactions with nuclei in low-temperature germanium detectors. During the operation of the SuperCDMS Soudan experiment, $^{210}$Pb sources were installed to study background rejection of the Ge detectors. Data from these sources were used to investigate energy loss associated with Frenkel defect formation in germanium crystals at mK temperatures. The spectrum of $^{206}$Pb nuclear recoils was examined near its expected 103 keV endpoint energy to extract the first experimentally determined average displacement threshold energy of 19.7 $\pm$ 0.5 (stat) $\pm$ 0.1 (syst) eV for germanium. This has implications for the sensitivity of future germanium-based dark matter searches including the SuperCDMS SNOLAB experiment. The SuperCDMS SNOLAB experiment will employ germanium and silicon detectors to improve current WIMP-search results by at least one order of magnitude for masses $\leq$ 10 GeV/c$^2$. This will require substantial shielding against cosmogenic and radiogenic backgrounds. The SuperCDMS SNOLAB passive shield will be permanent for the duration of the experiment so extensive simulations were undertaken to optimize the shield design. This resulted in a design of an outer layer of 60 cm of water, a middle layer of 20 cm of lead, and 30 cm of polyethylene which limits the background rate to that required for the primary physics goals of the experiments. The experiment will begin operations in 2020 and care must be taken during the construction phase to limit exposure to the $\pm$ 135 Bq/m$^3$ radon activity in the laboratory. The daughter products of $^{222}$Rn can attach to nearby surfaces leaving long-lived $^{210}$Pb in place for the duration of the experiment. For non-line-of-sight surfaces of the polyethylene shield, the maximum allowable $^{210}$Pb activity is 10,000 nBq/cm$^2$. A study was conducted to experimentally determine the contamination rate of polyethylene and copper by exposing samples for 83 days at SNOLAB. From the resulting surface activities, obtained from high-sensitivity measurements of alpha emissivity using the XIA UltraLo-1800 spectrometer, the average $^{210}$Pb plate-out rate was determined to be 249 and 423 atoms/day/cm$^2$ for polyethylene and copper, respectively. A time-dependent model of alpha activity was

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Regional Analysis of Building Distributed Energy Costs and CO2 Abatement: A U.S. - China Comparison

The following paper conducts a regional analysis of the U.S. and Chinese buildings? potential for adopting Distributed Energy Resources (DER). The expected economics of DER in 2020-2025 is modeled for a commercial and a multi-family residential building in different climate zones. The optimal building energy economic performance is calculated using the Distributed Energy Resources Customer Adoption Model (DER CAM) which minimizes building energy costs for a typical reference year of operation. Several DER such as combined heat and power (CHP) units, photovoltaics, and battery storage are considered. The results indicate DER have economic and environmental competitiveness potential, especially for commercial buildings in hot and cold climates of both countries. In the U.S., the average expected energy cost savings in commercial buildings from DER CAM?s suggested investments is 17percent, while in Chinese buildings is 12percent. The electricity tariffs structure and prices along with the cost of natural gas, represent important factors in determining adoption of DER, more so than climate. High energy pricing spark spreads lead to increased economic attractiveness of DER. The average emissions reduction in commercial buildings is 19percent in the U.S. as a result of significant investments in PV, whereas in China, it is 20percent and driven by investments in CHP. Keywords: Building Modeling and Simulation, Distributed Energy Resources (DER), Energy Efficiency, Combined Heat and Power (CHP), CO2 emissions 1. Introduction The transition from a centralized and fossil-based energy paradigm towards the decentralization of energy supply and distribution has been a major subject of research over the past two decades. Various concerns have brought the traditional model into question; namely its environmental footprint, its structural inflexibility and inefficiency, and more recently, its inability to maintain acceptable reliability of supply. Under such a troubled setting, distributed energy resources (DER) comprising of small, modular, electrical renewable or fossil-based electricity generation units placed at or near the point of energy consumption, has gained much attention as a viable alternative or addition to the current energy system. In 2010, China consumed about 30percent of its primary energy in the buildings sector, leading the country to pay great attention to DER development and its applications in buildings. During the 11th Five Year Plan (FYP), China has implemented 371 renewable energy building demonstration projects, and 210 photovoltaics (PV) building integration projects. At the end of the 12th FYP, China is targeting renewable energy to provide 10percent of total building energy, and to save 30 metric tons of CO2 equivalents (mtce) of energy with building integrated renewables. China is also planning to implement one thousand natural gas-based distributed cogeneration demonstration projects with energy utilization rates over 70percent in the 12th FYP. All these policy targets require significant DER systems development for building applications. China?s fast urbanization makes building energy efficiency a crucial economic issue; however, only limited studies have been done that examine how to design and select suitable building energy technologies in its different regions. In the U.S., buildings consumed 40percent of the total primary energy in 2010 [1] and it is estimated that about 14 billion m2 of floor space of the existing building stock will be remodeled over the next 30 years. Most building?s renovation work has been on building envelope, lighting and HVAC systems. Although interest has emerged, less attention is being paid to DER for buildings. This context has created opportunities for research, development and progressive deployment of DER, due to its potential to combine the production of power and heat (CHP) near the point of consumption and delivering multiple benefits to customers, such as cost

25 ENERGY STORAGE↗
DOE OSTI2019

Lithium Insertion Mechanism in Iron Fluoride Nanoparticles Prepared by Catalytic Decomposition of Fluoropolymer

Metal fluorides with high redox potential and capacity from strong metal-fluoride bonds and conversion reaction, makes them promising cathodic materials but detailed lithium insertion and extraction mechanisms have not been clearly understood and explained to date. Here we report low temperature synthesis of electrochemically active FeF3/FeF2 nanoparticles by catalytic decomposition of fluoropolymer [perfluoropolyether (PFPE)] using hydrated iron oxalate precursor in air and inert atmosphere. Freshly synthesized FeF3 nanoparticle delivered specific capacity over 210 mAh/g with decent cycling performance as a Li-ion battery cathode. Both in situ and ex situ characterization techniques were used to investigate the detailed PFPE decomposition and fluorination mechanism leading to FeF3/FeF2 formation as well as initial lithium insertion mechanism in FeF3 cathode. Specifically, a detailed understanding was investigated using thermogravimetric - mass spectroscopy (TGA-MS), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), transmission electron microscopy (TEM), scanning electron microscopy (SEM) - energy dispersive spectroscopy (EDS), and X-ray absorption near edge structure (XANES). The novel synthesis route developed not only offers an access to electrochemically active metal fluorides but also offers a catalytic approach for decomposing highly inert fluoropolymers for environmental protection.

Li-ion Battery, cathode, FeF3, FeF2, Fluoropolumer↗
DOE OSTI2022

Single pair of Weyl nodes in the spin-canted structure of EuCd 2 As 2

We report time reversal symmetry breaking Weyl semimetals are unique among Weyl materials in allowing the minimal number of Weyl points, thus offering the clearest signatures of the associated physics. Here we present neutron diffraction, density-functional theory, and transport measurement results which indicate that EuCd 2 As 2 , under ambient field, strain, and pressure, is such a material with a single pair of Weyl points. Our work reveals a magnetic structure (magnetic space group C2'/m') with Eu moments pointing along the [210] direction in plane and canted ~ 30° out of plane. Density functional theory calculations using this structure show that the observed canting drastically alters the relevant electronic bands, relative to the in-plane order, leading to a single set of well-defined Weyl points. Furthermore, we find the canting angle can tune the distance of the Weyl points above the Fermi level, with the smallest distance at low canting angles. Finally, transport measurements of the anomalous Hall effect and longitudinal magnetoresistance exhibit properties indicative of a chiral anomaly, thus supporting the neutron scattering and DFT results suggesting EuCd 2 As 2 is close to the ideal situation of the Weyl hydrogen atom.

36 MATERIALS SCIENCE↗
DOE OSTI1969

Application of Nuclear Technology to Art Identification Problems: First Annual Report

Throughout the centuries, as man has become increasingly affluent, his interest in antiquities and objects of art, and the price he has been willing to pay for them, has increased. Inevitably, one result has been to attract the unscrupulous to the production and sale of counterfeit paintings, sculptures, and other works of art. The skill of forgers varies but often is highly sophisticated. However, dealers, museum curators, and other experts have also become more skillful in the detection of forgeries. Scientific tools of increasing sensitivity and sophistication have gradually been applied to the examination of the materials of art and archaeology. Such tools frequently support and render more reliable the judgment of the experts. The quality of forgeries may improve further as their makers become acquainted with the new methods of detection and in turn learn to circumvent or confound the methods. Therefore, the development of still more advanced methods of examination has great utility in the art world. This is particularly true if the ultimate effect is to make circumvention of the methods of examination so costly that the economic incentives for producing forgeries may be substantially reduced, if not eliminated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Venturing into Unexplored Phase Space: Synthesis, Structure, and Properties of MgCo 3 B 2 Featuring a Rumpled Kagomé Network

MgCo 3 B 2 , a novel ternary boride in a previously unexplored phase space, was synthesized using the hydride route. In situ powder X-ray diffraction and DFT calculations aided in the discovery of this compound, whose structure was then determined by single-crystal X-ray diffraction. Like the closely related CeCo 3 B 2 , MgCo 3 B 2 crystallizes in centrosymmetric space group P6/mmm (a = 4.883(2) Å, c = 2.926(2) Å at 210 K, Z = 1). Unlike CeCo 3 B 2 , however, it adopts a disordered structure that features a rumpled Kagomé network of Co atoms, and Mg atoms fill the channels of a Co–B framework. Although the structural disorder leads to motifs that are similar to those observed in MgNi 3 B 2 and other related ternary borides, no evidence of an ordered superstructure was found by single-crystal X-ray diffraction or high-resolution powder X-ray diffraction. In the case of CeCo 3 B 2 , boron atoms occupy the center of regular Co 6 trigonal prisms; in MgCo 3 B 2 , boron atoms are shifted from the center of the prism to form B–B dimers with roughly the same length as those found in MgNi 3 B 2 . Magnetic susceptibility data exhibit an unusual temperature dependence that cannot be convincingly modeled by the modified Curie–Weiss equation, consistent with DFT calculations predicting a nonmagnetic ground state. Intrinsic susceptibility at 300 K is 1.42 × 10 –3 emu/mol Oe, which is comparable to that of paramagnetic YCo 3 B 2 and CeCo 3 B 2 with a similar structure and composition. Here, this study showcases the efficacy of combining several methodologies to discover new solids in unexplored phase spaces. This approach includes in situ PXRD data to monitor reactions of precursors upon heating, a diffusion-enhanced synthesis method, and DFT assessment of compound stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Deeper snow increases the net soil organic carbon accrual rate in moist acidic tussock tundra: 210Pb evidence from Arctic Alaska

The net change in the carbon inventory of arctic tundra remains uncertain as global warming leads to shifts in arctic water and carbon cycles. To better understand the response of arctic tundra carbon to changes in winter precipitation amount, we investigated soil depth profiles of carbon concentration and radionuclide activities ( 7 Be, 137 Cs, 210 Pb, and 241 Am) in the active layer of a twenty-two-year winter snow depth manipulation experiment in moist acidic tussock tundra at Toolik Lake, Alaska. Depth correlations of cumulative carbon dry mass (g cm -2 ) vs. unsupported 210 Pb activity (mBq g -1 ) were examined using a modified constant rate of supply (CRS) model. Results were best fit by two-slope CRS models indicating an apparent step temporal increase in the accumulation rate of soil organic carbon. Most of the best-fit model chronologies indicated that the increase in carbon accumulation rate apparently began and persisted after snow fence construction in 1994. The inhomogeneous nature of permafrost soils and their relatively low net carbon accumulation rates make it challenging to establish robust chronologic records. Nonetheless, the data obtained in this study support a decadal-scale increase in net soil organic carbon accumulation rate in the active layer of arctic moist acidic tussock tundra under conditions of increased winter precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Atomic Structure and Electrical Activity of Grain Boundaries and Ruddlesden-Popper Faults in Cesium Lead Bromide Perovskite

To evaluate the role of planar defects in lead-halide perovskites—cheap, versatile semiconducting materials—it is critical to examine their structure, including defects, at the atomic scale and develop a detailed understanding of their impact on electronic properties. In this study, postsynthesis nanocrystal fusion, aberration-corrected scanning transmission electron microscopy, and first-principles calculations are combined to study the nature of different planar defects formed in CsPbBr3 nanocrystals. Two types of prevalent planar defects from atomic resolution imaging are observed: previously unreported Br-rich [001](210)Σ5 grain boundaries (GBs) and Ruddlesden–Popper (RP) planar faults. The first-principles calculations reveal that neither of these planar faults induce deep defect levels, but their Br-deficient counterparts do. It is found that the Σ5 GB repels electrons and attracts holes, similar to an n–p–n junction, and the RP planar defects repel both electrons and holes, similar to a semiconductor–insulator–semiconductor junction. Finally, the potential applications of these findings and their implications to understand the planar defects in organic–inorganic lead-halide perovskites that have led to solar cells with extremely high photoconversion efficiencies are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Equation of state constraints from multi-messenger observations of neutron star mergers

The very first detection of gravitational waves from a neutron star binary merger, GW170817, exceeded all expectations. The event was relatively nearby, which may point to a relatively high merger rate. It was possible to extract finite-size effects from the gravitational-wave signal, which constrains the nuclear equation of state. Also, an electromagnetic counterpart was detected at many wavebands from radio to gamma rays marking the begin of a new multi-messenger era involving gravitational waves. We describe how multi-messenger observations of GW170817 are employed to constrain the nuclear equation of state. Combining the information from the optical emission and the mass measurement through gravitational waves leads to a lower limit on neutron star radii. According to this conservative analysis, which employs a minimum set of assumptions, the radii of neutron stars with typical masses should be larger than about 10.7 km. This implies a lower limit on the tidal deformability of about 210, while much stronger lower bounds are not supported by the data of GW170817. The multi-messenger interpretation of GW170817 rules out very soft nuclear matter and complements the upper bounds on NS radii which are derived from the measurement of finite-size effects during the pre-merger phase. We highlight the future potential of multi-messenger observations and of GW measurements of the postmerger phase for constraining the nuclear equation of state. Finally, we propose an observing strategy to maximize the scientific yield of future multi-messenger observations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1987

Wind tunnel results of the low-speed NLF(1)-0414F airfoil

The large performance gains predicted for the Natural Laminar Flow (NLF)(1)-0414F airfoil were demonstrated in two-dimensional airfoil tests and in wind tunnel tests conducted with a full scale modified Cessna 210. The performance gains result from maintaining extensive areas of natural laminar flow, and were verified by flight tests conducted with the modified Cessna. The lift, stability, and control characteristics of the Cessna were found to be essentially unchanged when boundary layer transition was fixed near the wing leading edge. These characteristics are very desirable from a safety and certification view where premature boundary layer transition (due to insect contamination, etc.) must be considered. The leading edge modifications were found to enhance the roll damping of the Cessna at the stall, and were therefore considered effective in improving the stall/departure resistance. Also, the modifications were found to be responsible for only minor performance penalties.

Murri, Daniel G.↗