SEARCH · Engineering Papers

Results for “JUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Very High Current Density Nb/AlN/Nb Tunnel Junctions for Low-Noise Submillimeter Mixers

We have fabricated and tested submillimeter-wave superconductor-insulator-superconductor (SIS) mixers using very high current density Nb/AlN/Nb tunnel junctions (J(sub c) approximately equal 30 kA/sq cm) . The junctions have low resistance-area products (R(sub N)A approximately 5.6 Omega.sq micron), good subgap to normal resistance ratios R(sub sg)/R(sub N) approximately equal 10, and good run-to-run reproducibility. From Fourier transform spectrometer measurements, we infer that omega.R(sub N)C = 1 at 270 GHz. This is a factor of 2.5 improvement over what is generally available with Nb/AlO(x)/Nb junctions suitable for low-noise mixers. The AlN-barrier junctions are indeed capable of low-noise operation: we measure an uncorrected receiver noise temperature of T(sub RX) = 110 K (DSB) at 533 GHz for an unoptimized device. In addition to providing wider bandwidth operation at lower frequencies, the AlN-barrier junctions will considerably improve the performance of THz SIS mixers by reducing RF loss in the tuning circuits.

Kawamura, Jonathan↗

NASA NTRS1995

Cost Trade Between Multi-Junction, Gallium Arsenide, and Silicon Solar Cells

Multi-junction (MJ), gallium arsenide (GaAs), and silicon (Si) solar cells have respective test efficiencies of approximately 24%, 18.5% and 14.8%. Multi-junction and gallium arsenide solar cells weigh more than silicon solar 2 cells and cost approximately five times as much per unit power at the cell level. A trade is performed for the TRMM spacecraft to determine which of these cell types would have offered an overall performance and price advantage to the spacecraft. A trade is also performed for the multi-junction cells under the assumption that they will cost over ten times that of silicon cells at the cell level. The trade shows that the TRMM project, less the cost of the instrument, ground systems and mission operations, would spend approximately $552,000 dollars per kilogram to launch and suppon3science in the case of the spacecraft equipped with silicon solar cells. If these cells are changed out for gallium arsenide solar cells, an additional 31 kilograms of science can be launched and serviced at a price of approximately $90 thousand per kilogram. The weight reduction is shown to derive from the smaller area of the array and hence reductions in the weight of the array substrate and supporting structure. ff the silicon solar cells are changed out for multi-junction solar cells, an additional 45 kilograms of science above the silicon base line can be launched and supported at a price of approximately $58,000 per kilogram. The trade shows that even if the multi-junction cells are priced over ten times that of silicon cells, a price that is much higher than projected, that the additional 45 kilograms of science are launched and serviced at $180,000 per kilogram. This is still much less than the original $552,000 per kilogram to launch and service the science. Data and qualitative factors are presented to show that these figures are subject to a great deal of uncertainty. Nonetheless, the benefit of the higher efficiency solar cells for TRMM is far greater than the uncertainties in the analysis.

Gaddy, Edward M.↗

NASA NTRS1998

Observation and Modeling of Single Wall Carbon Nanotube Bend Junctions

Single wall carbon nanotube (SWNT) bends, with diameters from approx. 1.0 to 2.5 nm and bend angles from 18 deg. to 34 deg., are observed in catalytic decomposition of hydrocarbons at 600 - 1200 C. An algorithm using molecular dynamics simulation (MD) techniques is developed to model these structures that are considered to be SWNT junctions formed by topological defects (i.e. pentagon-heptagon pairs). The algorithm is used to predict the tube helicities and defect configurations for bend junctions using the observed tube diameters and bend angles. The number and arrangement of the defects at the junction interfaces are found to depend on the tube helicities and bend angle. The structural and energetic calculations using the Brenner potential show a number of stable junction configurations for each bend angle with the 34 deg. bends being more stable than the others. Tight binding calculations for local density of state (LDOS) and transmission coefficients are carried out to investigate electrical properties of the bend junctions.

Han, Jie↗

NASA NTRS2002

Fabrication of Tunnel Junctions For Direct Detector Arrays With Single-Electron Transistor Readout Using Electron-Beam Lithography

This paper will describe the fabrication of small aluminum tunnel junctions for applications in astronomy. Antenna-coupled superconducting tunnel junctions with integrated single-electron transistor readout have the potential for photon-counting sensitivity at sub-millimeter wavelengths. The junctions for the detector and single-electron transistor can be made with electron-beam lithography and a standard self-aligned double-angle deposition process. However, high yield and uniformity of the junctions is required for large-format detector arrays. This paper will describe how measurement and modification of the sensitivity ratio in the resist bilayer was used to greatly improve the reliability of forming devices with uniform, sub-micron size, low-leakage junctions.

Stevenson, T. R.↗

NASA NTRS2005

High-Efficiency Multi-Junction Space Solar Development Utilizing Lattice Grading

Progress towards achieving a high one-sun air mass 0 (AM0) efficiency in a monolithic dual junction solar cell comprised of a 1.62 eV InGaP top cell and a 1.1 eV InGaAs bottom cell grown on buffered GaAs is reported. The performance of stand-alone 1.62 eV InGaP and 1.1 eV InGaAs cells is compared to that of the dual junction cell. Projected AM0 efficiencies of 15.7% and 16.5% are expected for the 1.62 eV InGaP and 1.1 eV InGaAs cells grown on buffered GaAs. The dual junction cell has a projected one-sun AM0 conversion efficiency of 17%. The projected efficiencies are based upon the application of an optimized anti-reflective coating (ARC) to the as-grown cells. Quantum efficiency (QE) data obtained from the dual junction cell indicate that is is bottom cell current limited with the top cell generating 50% more current than the bottom cell. A comparison of the QE data for the stand-alone 1.1 eV InGaAs cell to that of the 1.1 eV InGaAs bottom cell in the tandem configuration indicates a degradation of the bottom cell conversion efficiency in the tandem configuration. The origin of this performance degradation is at present unknown. If the present limitation can be overcome, then a one-sun AM0 efficiency of 26% is achievable with the 1.62 eV/1.1 eV dual junction cell grown lattice-mismatched to GaAs.

Stan, Mark A.↗

NASA NTRS2006

Arrays of Nano Tunnel Junctions as Infrared Image Sensors

Infrared image sensors based on high density rectangular planar arrays of nano tunnel junctions have been proposed. These sensors would differ fundamentally from prior infrared sensors based, variously, on bolometry or conventional semiconductor photodetection. Infrared image sensors based on conventional semiconductor photodetection must typically be cooled to cryogenic temperatures to reduce noise to acceptably low levels. Some bolometer-type infrared sensors can be operated at room temperature, but they exhibit low detectivities and long response times, which limit their utility. The proposed infrared image sensors could be operated at room temperature without incurring excessive noise, and would exhibit high detectivities and short response times. Other advantages would include low power demand, high resolution, and tailorability of spectral response. Neither bolometers nor conventional semiconductor photodetectors, the basic detector units as proposed would partly resemble rectennas. Nanometer-scale tunnel junctions would be created by crossing of nanowires with quantum-mechanical-barrier layers in the form of thin layers of electrically insulating material between them (see figure). A microscopic dipole antenna sized and shaped to respond maximally in the infrared wavelength range that one seeks to detect would be formed integrally with the nanowires at each junction. An incident signal in that wavelength range would become coupled into the antenna and, through the antenna, to the junction. At the junction, the flow of electrons between the crossing wires would be dominated by quantum-mechanical tunneling rather than thermionic emission. Relative to thermionic emission, quantum mechanical tunneling is a fast process.

Son, Kyung-Ah↗

NASA NTRS2004

Semiconductor Lasers Containing Quantum Wells in Junctions

In a recent improvement upon In(x)Ga(1-x)As/InP semiconductor lasers of the bipolar cascade type, quantum wells are added to Esaki tunnel junctions, which are standard parts of such lasers. The energy depths and the geometric locations and thicknesses of the wells are tailored to exploit quantum tunneling such that, as described below, electrical resistances of junctions and concentrations of dopants can be reduced while laser performances can be improved. In(x)Ga(1-x)As/InP bipolar cascade lasers have been investigated as sources of near-infrared radiation (specifically, at wavelengths of about 980 and 1,550 nm) for photonic communication systems. The Esaki tunnel junctions in these lasers have been used to connect adjacent cascade stages and to enable transport of charge carriers between them. Typically, large concentrations of both n (electron-donor) and p (electron-acceptor) dopants have been necessary to impart low electrical resistances to Esaki tunnel junctions. Unfortunately, high doping contributes free-carrier absorption, thereby contributing to optical loss and thereby, further, degrading laser performance. In accordance with the present innovation, quantum wells are incorporated into the Esaki tunnel junctions so that the effective heights of barriers to quantum tunneling are reduced (see figure).

Yang, Rui Q.↗

DOE OSTI2025

Solute clustering in polycrystals: Unveiling the interplay of grain boundary junction and long-range solute attraction effects

Spectral analysis of local atomic environments has become a powerful tool for studying solute atom segregation and interactions at grain boundaries in nanocrystalline alloys. When applied to individual grain boundaries, the spectral analysis has shown that solute-solute interaction can be either attractive or repulsive, with long-range relative attraction enhancing the likelihood for solute atoms to begin clustering. In this article, we combine this analysis with a new grain-boundary structure descriptor based on grain-boundary atom coordination, to investigate the impact of grain-boundary junctions on solute atom segregation in polycrystals. Specifically, we systematically characterize the tendency of solute clusters to begin forming at various types of ordinary grain boundaries, triple junctions, and high-order junctions in Ag polycrystals containing either Ni or Cu solute atoms. Our findings demonstrate that the formation of solute clusters at grain boundaries is primarily driven by long-range relative solute attraction, rather than short-range solute-solute interactions. Furthermore, this effect is most pronounced near grain-boundary junctions. Our study highlights the multiscale nature of solute segregation at crystalline interfaces and provides new insights into the complex phenomena governing heterogeneous solute segregation in grain-boundary networks.

Grain-boundary junction↗

DOE OSTI2025

Interstitial solute segregation at triple junctions: Implications for nanomaterials and a case study of hydrogen in palladium

At very fine grain sizes, grain boundary segregation can deviate from conventional behavior due to triple junction effects. While this issue has been addressed in prior work for substitutional alloys, here we develop a framework that accounts for interstitial sites in the grains, grain boundaries, and triple junctions of model Pd(H) polycrystals. This approach allows computation of interstitial segregation spectra separately at both defect types, which permits an understanding of segregation at all grain sizes via a size-scaling spectral isotherm. Here, the size dependencies of dilute Pd(H) are found to be influenced not only by the triple junction content, but also by grain size–dependent lattice strains; the latter effect is evidenced by size dependencies of individual grain boundary and junction subspectra. The framework proposed here is applicable to interstitial alloys in general and may serve as a basis for interfacial engineering in interstitial nanocrystalline alloys. As an example, we show that using the dilute limit isotherm, hydrogen density can triple in nanocrystalline vis-à-vis microcrystalline Pd due to hydrogen adsorption at intergranular defect sites.

Alloys↗

NASA NTRS2004

The Environmental Performance at Low Intensity, Low Temperature (LILT) of High Efficiency Triple Junction Solar Cells

A number of JPL missions, either active or in the p l d g stages, require the accurate LILT flew intensity - low temperate) climate of triple-junction solar. Although triple ignition LILT performance was reported as recently as 2002, there has been an evolutionary advance in cell technology by both U.S. space cell manufacturers that, for mission design purposes, effectively obsoletes the earlier data. As a result, JPL initiated a program to develop a database for the LILT performance of the new high performance triple junction solar cells. JPL obtained Emcore Advanced triple Juntion CIC assemblies and Spectrolab Ultra Triple Junction CIC assemblies. These cells were tested at temperature-intensity ranges designed to cover applications between 1 and 5.18 AU solar distances. 1 MeV electron irradiation from 25 E14 to 1 El5 w were performed on the cells to evaluate the combined effect of particulate radiation and LILT conditions. The effect of LILT conditions was observed to incur an increase in the variation of cell performances such that at simulted 5.18 AU conditions the average performance was approximately 30% with the best cells measuring between 32 and 34% efficiency. The 30% average efficiency compares with approximately 25% average efficiency measured on earlier technology triple junction solar cells.

triple junction↗

DOE OSTI2024

Vortex-induced anomalies in the superconducting quantum interference patterns of topological insulator Josephson junctions

The superconducting quantum interference (SQI) patterns of Josephson junctions fabricated from hybrid structures that interface an s-wave superconductor with a topological insulator can be used to detect signatures of novel quasiparticle states. Here, we compare calculated and experimental SQI patterns obtained from hybrid junctions fabricated on cadmium arsenide, a two-dimensional topological insulator. The calculations account for the effects of Abrikosov (anti-) vortices in the superconducting contacts. They describe the experimentally observed deviations of the SQI from an ideal Fraunhofer pattern, including anomalous phase shifts, node lifting, even/odd modulations of the lobes, irregular lobe spacing, and an asymmetry in the positive/negative magnetic field. We also show that under a current bias, these vortices enter the electrodes even if there is no intentionally applied external magnetic field. The results show that Abrikosov vortices in the electrodes of the junctions can explain many of the observed anomalies in the SQI patterns of topological insulator Josephson junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Twist-assisted all-antiferromagnetic tunnel junction in the atomic limit

Abstract Antiferromagnetic spintronics 1,2 shows great potential for high-density and ultrafast information devices. Magnetic tunnel junctions (MTJs), a key spintronic memory component that are typically formed from ferromagnetic materials, have seen rapid developments very recently using antiferromagnetic materials 3,4 . Here we demonstrate a twisting strategy for constructing all-antiferromagnetic tunnel junctions down to the atomic limit. By twisting two bilayers of CrSBr, a 2D antiferromagnet (AFM), a more than 700% nonvolatile tunnelling magnetoresistance (TMR) ratio is shown at zero field (ZF) with the entire twisted stack acting as the tunnel barrier. This is determined by twisting two CrSBr monolayers for which the TMR is shown to be derived from accumulative coherent tunnelling across the individual CrSBr monolayers. The dependence of the TMR on the twist angle is calculated from the electron-parallel momentum-dependent decay across the twisted monolayers. This is in excellent agreement with our experiments that consider twist angles that vary from 0° to 90°. Moreover, we also find that the temperature dependence of the TMR is, surprisingly, much weaker for the twisted as compared with the untwisted junctions, making the twisted junctions even more attractive for applications. Our work shows that it is possible to push nonvolatile magnetic information storage to the atomically thin limit.

Science & Technology - Other Topics↗

DOE OSTI2024

Alternating-bias assisted annealing of amorphous oxide tunnel junctions

Superconducting quantum bits (qubits) rely on ultra-thin, amorphous oxide tunneling barriers that can have significant inhomogeneities and defects as grown. This can result in relatively large uncertainties and deleterious effects in the circuits, limiting the scalability. Finding a robust solution to the junction reproducibility problem has been a long-standing goal in the field. Here, we demonstrate a transformational technique for controllably tuning the electrical properties of aluminum-oxide tunnel junctions. This is accomplished using a low-voltage, alternating-bias applied individually to the tunnel junctions, with which resistance tuning by more than 70% can be achieved. The data indicates an improvement of coherence and reduction of two-level system defects. Transmission electron microscopy shows that the treated junctions are predominantly amorphous, albeit with a more uniform distribution of alumina coordination across the barrier. This technique is expected to be useful for other devices based on ionic amorphous materials.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Electrically tunable nonlinear light generation in plasmonic tunnel junctions

Active and efficient control of nonlinear optical processes is essential for integrated photonics, with applications in signal processing, ultrafast switching, and quantum light manipulation. While nanophotonic structures are powerful for enhancing nonlinearities, achieving wide-range electrical tunability has remained a challenge. Plasmonic tunnel junctions offer a unique path to bridge this gap because they combine extreme optical field confinement with direct electrical control in a single nanoscale device. Here, we report the first, to our knowledge, demonstration of electrically tunable second-harmonic generation (SHG) in plasmonic tunnel junctions. Using ultra-stable epitaxial heterostructures, we achieve reproducible modulation of SHG with depths up to ∼500% and magnitudes above 1.3V −1 . We identify two mechanisms, electric-field-induced SHG (EFISH) and ion migration, that can either compete or cooperate depending on junction thickness and bias, enabling both broad tunability and ferroelectric-like hysteretic switching. These findings establish plasmonic tunnel junctions as a platform for electrically controlled nonlinear optics, with potential for nanoscale light sources, reconfigurable modulators, and neuromorphic photonic devices..

42 ENGINEERING↗

NASA NTRS1971

A fast algorithm for the calculation of junction capacitance and its application for impurity profile determination

A fast algorithm is described which calculates the space charge layer width and junction capacitance for an arbitrary impurity profile and for plane, cylindrical and spherical junctions. The algorithm is based on the abrupt space charge edge (ASCE) approximation. A method to use the algorithm for the determination of impurity profiles for two-sided junctions is presented. An expression is derived for the built-in voltage to be used for capacitance calculations with the ASCE approximation. Experimental evidence is given that the algorithm permits very accurate capacitance calculations and also predicts the exact temperature dependence of the junction capacitance.

Deman, H. J. J.↗

NASA NTRS1972

A fast algorithm for the calculation of junction capacitance and its application for impurity profile determination.

De Man, H. J. J.↗

NASA NTRS1974

An induced junction photovoltaic cell

Silicon solar cells operating with induced junctions rather than diffused junctions have been fabricated and tested. Induced junctions were created by forming an inversion layer near the surface of the silicon by supplying a sheet of positive charge above the surface. Measurements of the response of the inversion layer cell to light of different wavelengths indicated it to be more sensitive to the shorter wavelengths of the sun's spectrum than conventional cells. The greater sensitivity occurs because of the shallow junction and the strong electric field at the surface.

Call, R. L.↗

NASA NTRS1973

An investigation of the SNS Josephson junction as a three-terminal device

A particular phenomenon of the SNS Josephson junction was investigated; i.e., control by a current entering the normal region and leaving through one of the superconducting regions. The effect of the control current on the junction was found to be dependent upon the ration of the resistances of the two halves of the N layer. A low frequency, lumped, nonlinear model was proposed to describe the electrical characteristics of the device, and a method was developed to plot the dynamic junction resistance as a function of junction current. The effective thermal noise temperature of the sample was determined. Small signal linearized analysis of the device suggests its use as an impedance transformer, although geometric limitations must be overcome. Linear approximation indicates that it is reciprocal and no power gain is possible. It is felt that, with suitable metallurgical and geometrical improvements, the device has promise to become a superconducting transistor.

Meissner, H.↗