SEARCH · Engineering Papers

Results for “Irrigation Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Accurate Inventories Of Irrigated Land

System for taking land-use inventories overcomes two problems in estimating extent of irrigated land: only small portion of large state surveyed in given year, and aerial photographs made on 1 day out of year do not provide adequate picture of areas growing more than one crop per year. Developed for state of California as guide to controlling, protecting, conserving, and distributing water within state. Adapted to any large area in which large amounts of irrigation water needed for agriculture. Combination of satellite images, aerial photography, and ground surveys yields data for computer analysis. Analyst also consults agricultural statistics, current farm reports, weather reports, and maps. These information sources aid in interpreting patterns, colors, textures, and shapes on Landsat-images.

Wall, S.↗

DOE OSTI2025

In-Conduit Hydropower for Public Water Supply Systems: Development Challenges and Costs

Conduit hydropower leverages existing water infrastructure to provide energy solutions, though deployment has been slow. A 2022 US Department of Energy (DOE)–funded report led by Oak Ridge National Laboratory (ORNL) summarizes a reconnaissance-level study of hydropower potential at national conduits (Kao et al., 2022). The report includes power and energy estimates across three major sectors of conduit hydropower potential: municipal, agricultural, and industrial. Water resources include public water supply systems (municipal and industrial), irrigation canal systems (agricultural), thermoelectric cooling systems (industrial), and wastewater systems (municipal and industrial). In total, 1.41 GW of power potential was estimated nationwide. Subsequently, DOE has funded ORNL through the Conduit Hydropower Engineering, Evaluation, and Technology Acceleration project (CHEETA) to improve deployment potential for conduit hydropower. Work thus far has focused on “in-conduit” hydropower (ICH)—or “in-pipe” hydropower—for public water supply systems, though the project is planning to cover conduit hydropower more broadly. The timeline of ORNL’s conduit hydropower related research and development (R&D) is shown in Figure 1. The results of CHEETA should benefit the hydropower industry by providing insights into costs, barriers, and other considerations that impact project development. The hydropower industry and municipal/industrial conduit stakeholders will use the output to inform development decisions and advance low-impact hydropower growth in the US.

13 HYDRO ENERGY↗

NASA NTRS2016

Integrating Satellite and Surface Sensor Networks for Irrigation Management Applications in California

Satellite mapping of evapotranspiration (ET) from irrigated agricultural lands can provide agricultural producers and water managers with information that can be used to optimize agricultural water use, especially in regions with limited water supplies. The timely delivery of information on agricultural crop water requirements has the potential to make irrigation scheduling more practical, convenient, and accurate. We present a system for irrigation scheduling and management support in California and describe lessons learned from the development and implementation of the system. The Satellite Irrigation Management Support (SIMS) framework integrates satellite data with information from agricultural weather networks to map crop canopy development, basal crop coefficients (Kcb), and basal crop evapotranspiration (ETcb) at the scale of individual fields. Information is distributed to agricultural producers and water managers via a web-based irrigation management decision support system and web data services. SIMS also provides an application programming interface (API) that facilitates integration with other irrigation decision support tools, estimation of total crop evapotranspiration (ETc) and calculation of on-farm water use efficiency metrics. Accuracy assessments conducted in commercial fields for more than a dozen crop types to date have shown that SIMS seasonal ETcb estimates are within 10 mean absolute error (MAE) for well-watered crops and within 15 across all crop types studied, and closely track daily ETc and running totals of ETc measured in each field. Use of a soil water balance model to correct for soil evaporation and crop water stress reduces this error to less than 8 MAE across all crop types studied to date relative to field measurements of ETc. Results from irrigation trials conducted by the project for four vegetable crops have also demonstrated the potential for use of ET-based irrigation management strategies to reduce total applied water by 20-40 relative to grower standard practices while maintaining crop yields and quality.

Nemani, Ramakrishna R.↗

NASA NTRSDate not supplied

Using Weather-Based Irrigation Scheduling to Optimize Red Cabbage Production

A replicated field trial was performed on a Chualar sandy loam in California’s Salinas Valley during 2020 to investigate the yield response of drip-irrigated red cabbage to applied water volume. The crop was transplanted on 29-April and established with approximately 4 inches of water uniformly applied by overhead sprinklers. At 22 days after transplanting (DAT), five drip-irrigation treatments were established at 50, 75, 100, 125, and 150% of estimated daily crop evapotranspiration (ETc). The treatments were replicated 6 times following a randomized complete block design. The 100% crop water requirement was specified by CropManage, an irrigation scheduling application that combines a crop coefficient approach with reference evapotranspiration data from the California Irrigation Management Information System. The crop was irrigated 3 times per week. Nitrogen fertilizer, totaling 320 lbs/ac, was applied through the drip system once per week. Commercial carton yields were evaluated 85 DAT. The 100% ETc treatment received a total of 18.3 inches of water including sprinkler establishment and had the highest yield at 57 tons/ac, while the 50% treatment (11.5 inches) yielded a low of 32 tons/ac. For reference, average applied water reported for this crop on the Central Coast is about 22.5 inches by way of a variety of irrigation methods including drip, sprinkler, and furrow. Aboveground biomass was evaluated 91 DAT. The 100% treatment had the highest fresh (105 tons/ac) and dry (7.7 tons/ac) biomass yield. Commercial bulk yields at 98 DAT and were maximized by 20-24 inches of water (100%, 125% treatments) and ranged from a high of 67 tons/ac for 125% ETc treatment (24.3 inches of water) to 35 tons/ac for the 50% treatment (12.6 inches). The results demonstrated that yield and quality targets for this crop can be met by drip irrigation, and CropManage is an effective decision support tool for evaluating crop water requirements based on weather data.

Weather-Based↗

NASA NTRS1981

Irrigation market for solar thermal parabolic dish systems

The potential size of the onfarm-pumped irrigation market for solar thermal parabolic dish systems in seven high-insolation states is estimated. The study is restricted to the displacement of three specific fuels: gasoline, diesel and natural gas. The model was developed to estimate the optimal number of parabolic dish modules per farm based on the minimum cost mix of conventional and solar thermal energy required to meet irrigation needs. The study concludes that the potential market size for onfarm-pumped irrigation applications ranges from 101,000 modules when a 14 percent real discount rate is assumed to 220,000 modules when the real discount rate drops to 8 percent. Arizona, Kansas, Nebraska, New Mexico and Texas account for 98 percent of the total demand for this application, with the natural gas replacement market accounting for the largest segment (71 percent) of the total market.

Habib-Agahi, H.↗

NASA NTRS1989

Magnification of starting torques of dc motors by maximum power point trackers in photovoltaic systems

Direct current (dc) motors are used in terrestrial photovoltaic (PV) systems such as in water-pumping systems for irrigation and water supply. Direct current motors may also be used for space applications. Simple and low weight systems including dc motors may be of special interest in space where the motors are directly coupled to the solar cell array (with no storage). The system will operate only during times when sufficient insolation is available. An important performance characteristic of electric motors is the starting to rated torque ratio. Different types of dc motors have different starting torque ratios. These ratios are dictated by the size of solar cell array, and the developed motor torque may not be sufficient to overcome the load starting torque. By including a maximum power point tracker (MPPT) in the PV system, the starting to rated torque ratio will increase, the amount of which depends on the motor type. The starting torque ratio is calculated for the permanent magnet, series and shunt excited dc motors when powered by solar cell arrays for two cases: with and without MPPT's. Defining a motor torque magnification by the ratio of the motor torque with an MPPT to the motor torque without an MPPT, a magnification of 3 was obtained for the permanent magnet motor and a magnification of 7 for both the series and shunt motors. The effect of the variation of solar insolation on the motor starting torque was covered. All motor types are less sensitive to insolation variation in systems including MPPT's as compared to systems with MPPT's. The analysis of this paper will assist the PV system designed to determine whether or not to include an MPPT in the system for a specific motor type.

Appelbaum, Joseph↗

NASA NTRS2019

Global Response Patterns of Major Rainfed Crops to Adaptation by Maintaining Current Growing Periods and Irrigation

Increasing temperature trends are expected to impact yields of major field crops by affecting various plant processes, such as phenology, growth, and evapotranspiration. However, future projections typically do not consider the effects of agronomic adaptation in farming practices. We use an ensemble of seven Global Gridded Crop Models to quantify the impacts and adaptation potential of field crops under increasing temperature up to 6 K, accounting for model uncertainty. We find that without adaptation, the dominant effect of temperature increase is to shorten the growing period and to reduce grain yields and production. We then test the potential of two agronomic measures to combat warming-induced yield reduction: (i) use of cultivars with adjusted phenology to regain the reference growing period duration and (ii) conversion of rainfed systems to irrigated ones in order to alleviate the negative temperature effects that are mediated by crop evapotranspiration. We find that cultivar adaptation can fully compensate global production losses up to 2 K of temperature increase, with larger potentials in continental and temperate regions. Irrigation could also compensate production losses, but its potential is highest in arid regions, where irrigation expansion would be constrained by water scarcity. Moreover, we discuss that irrigation is not a true adaptation measure but rather an intensification strategy, as it equally increases production under any temperature level. In the tropics, even when introducing both adapted cultivars and irrigation, crop production declines already at moderate warming, making adaptation particularly challenging in these areas.

Minoli, Sara↗

DOE OSTI2026

Daily evapotranspiration changes during heatwaves at 32 NEON sites, 2019-2021

This dataset provides partitioned evapotranspiration (ET, the combined loss of water from soil and plant surfaces) anomalies during heatwave events—soil evaporation (E) and transpiration (T)—for 268 heatwave events across 32 National Ecological Observatory Network (NEON) flux sites in the contiguous United States from 2019–2021. Using an ensemble of four high-frequency turbulence methods (Flux-variance Similarity, Conditional Eddy Covariance [CEC], CEC with Water-Use Efficiency, and Conditional Eddy Accumulation; see Zahn and Bou-Zeid 2024), half-hourly transpiration-to-evapotranspiration (T/ET) ratios were derived from 20 hertz (Hz, cycles per second) eddy covariance measurements of carbon dioxide (CO₂) and water vapor (H₂O) concentrations. The dataset spans six vegetation types including evergreen and deciduous forests, grasslands, cultivated crops, shrublands, and emergent herbaceous wetlands. Data Package Contents: The dataset includes a single CSV (comma-separated values) file containing daily anomalies (deviations from baseline conditions) for transpiration (Delta_T), evaporation (Delta_E), total evapotranspiration (Delta_ET), and T/ET ratio (Delta_T_ET) during each day of identified heatwave events. The file also includes site codes, dates, heatwave event identifiers, and day-of-heatwave indicators. The CSV file can be opened with spreadsheet software (Microsoft Excel, Google Sheets) or programming environments (Python, R, MATLAB). This resource enables researchers to investigate ecosystem-specific responses to thermal extremes, validate land surface model partitioning of ET fluxes, and examine feedbacks between water cycling and surface energy balance during heatwaves. The dataset is particularly valuable for studies linking vegetation hydraulic strategies to climate resilience, as it captures the divergent responses of shallow-rooted versus deep-rooted ecosystems. Potential applications include improving drought early warning systems, informing irrigation management strategies, and advancing our mechanistic understanding of land-atmosphere interactions under extreme heat conditions.

Day of Heatwave↗

DOE OSTI2026

Integrating agrivoltaics into smallholder farming systems to enhance food production and irrigation efficiency under climate stress

Smallholder agricultural growers and entrepreneurs (SAGE) have a crucial role in sustaining food security; their cultivation accounts for roughly 30% of global crop production and contributes substantially to the diversity and nutritional value of food systems. Despite their awareness of and flexibility to adapt to productivity challenges, SAGE communities remain highly vulnerable to heat and drought stress, which threatens both livelihoods and local food availability. While intensification and adaptive farm practices offer partial resilience, their capacity to buffer sudden climatic extremes remains limited. Agrivoltaics, the dual use of land for solar electricity generation and crop cultivation, has emerged as a promising strategy to enhance agricultural productivity and its resilience to climate extremes by altering microclimatic conditions. Although proven effective in hot and arid regions, the benefits of agrivoltaics for temperate climates and small-scale farms remain minimally explored. To address this gap, we evaluated the performance of a small-scale agrivoltaics system in a temperate climate for high-value crops, including leafy vegetables and garlic. We investigate whether the system can (i) protect crops during extreme heat events and (ii) enhance productivity and reduce irrigation requirements during hot and dry periods unsuitable for conventional production. Our findings provide evidence that agrivoltaics is a climate-resilient farming strategy under current and projected climate scenarios, capable of improving yields (by +43% to +127% for the leafy vegetables grown) and reducing water consumption, while creating complementary economic opportunities through decentralized energy generation systems. This work supports the integration of agrivoltaics into small-scale agricultural systems as an innovative pathway to strengthen food security, bolster farmer livelihoods, and enable multiple co-benefits from broader solar energy adoption.

14 SOLAR ENERGY↗

NASA NTRSDate not supplied

Initial Evaluation of CropManage Decision-Support Model for Vineyard ET Estimation

The CropManage(CM) decision-support web application was originally developed by U.C. Cooperative Extension to support evapotranspiration (ET) based irrigation scheduling and nutrient management of cool-season vegetables. The model uses prescribed crop phenology curves to develop daily estimates of fractional green canopy cover (Fc) within the field. Periodic Fc observations acquired by ground-based methods or imported from NASA’s Satellite Irrigation Management Support (SIMS) can be used to adjust the prescribed timeseries for such factors as weather anomalies or non-standard agronomic practice, as needed. Fc is then converted to daily crop coefficient (fraction of reference ET) values. The crop coefficient is combined with reference evapotranspiration, collected by the California Irrigation Management Information System, to derive daily ET estimates for the given field. Irrigation runtime recommendations are issued for a given date based on total ET since the last irrigation event (less any rainfall), and corrected for distribution uniformity of the water delivery system. In this project, CM was adapted to vineyards by adding sub-models to account for early-season depletion of stored soil moisture, cover crop presence, and intentional water stress. An initial trial was performed on a Central Coast winegrape vineyard, where an eddy covariance tower measured daily ET during from May-Dec 2020. Total ET for the period showed strong agreement between the tower-based measurements (443 mm) and the CM model (431 mm). The model tended to overestimate cumulative ET during mid-June by up to 30 mm (about 15%) and later underestimated cumulative ET by as much as 65 mm (about 23%) in late September, suggesting that additional model calibration is needed to improve simulation of within-season variability. Results will be reported for trials on additional vineyard sites conducted during the 2021 season.

Evaluation↗

NASA NTRS2024

How Can Future Climate Change Affect the Corn Production System in Nebraska, USA?

The increasing temperatures and changing precipitation patterns have affected both crop yields and water requirements challenging agricultural systems in sustaining high crop yields and ensuring water and food security. In the present study, we evaluated the impact of climate change on the corn production under irrigated and rainfed cropping systems in Nebraska considering four climate zones until 2100 as a case study for the US Corn Belt. Additionally, suggests ways to reduce the impact of climate change on corn yield and water resources. Five global circulation model datasets from the sixth phase of the Coupled Model Intercomparison Project (CMIP6) interconnected to Shared Socioeconomic Pathways (SSPs), were selected. Three future periods: near (2020–2039), mid (2040–2069), and far future (2070–2100) under SSP226, SSP370, and SSP585 scenarios were used to predict the climate changes, crop cycle length, crop yield, and crop water requirement. Additionally, we input annual CO2 concentration scenarios for each SSP scenario to model changes from 2015 to 2100 using the CERES-Maize model. Temperatures are forecasted to rise, precipitation to decline, and crop cycle length to decrease, particularly for SSP370 (up to 49% yield decrease) and SSP585 (up to 67% yield decrease) by 2070–2100. Yields are expected to decline across all scenarios and periods for irrigated and rainfed fields due to the reduction in crop cycle length. Crop water demand is projected to increase, with rainfed systems facing heightened impact due to reduced precipitation. Addressing climate change in Nebraska requires actions like developing new corn varieties to longer the crop season, transitioning to efficient irrigation systems, improving irrigation management for water and food security, and reducing the risk of conflicts over its use. These results open possibilities for discussion about the actions that can be taken to cope with climate change and guarantee water and food security in the US Corn Belt.

CMIP6↗

NASA NTRS2022

Remote sensing-based vegetation and soil moisture constraints reduce irrigation estimation uncertainty

Understanding the human water footprint and its impact on the hydrological cycle is essential to inform water management under climate change. Despite efforts in estimating irrigation water withdrawals in earth system models, uncertainties and discrepancies exist within and across modeling systems conditioned by model structure, irrigation parameterization, and the choice of input datasets. Achieving model reliability could be much more challenging for data-sparse regions, given limited access to ground truth for parameterization and validation. Here, we demonstrate the potential of utilizing remotely sensed vegetation and soil moisture observations in constraining irrigation estimation in the Noah-MP land surface model. Results indicate that the two constraints together can effectively reduce model sensitivity to the choice of irrigation parameterization by 7%–43%. It also improves the characterization of the spatial patterns of irrigation and its impact on evapotranspiration and surface soil moisture by correcting for vegetation conditions and irrigation timing. This study highlights the importance of utilizing remotely sensed soil moisture and vegetation measurements in detecting irrigation signals and correcting for vegetation growth. Integrating the two remote sensing datasets into the model provides an effective and less feature engineered approach to constraining the uncertainty of irrigation modeling. Such strategies can be potentially transferred to other modeling systems and applied to regions across the globe.

Wanshu Nie↗

NASA NTRSDate not supplied

Derivation and Testing of Consumptive Water Use Fraction for Specialty Crops

The Crop Consumptive Use Fraction (CCUF) expresses beneficial water use in the form of seasonal evapotranspiration of applied water (ETAW), relative to total irrigation volume. The metric is an indicator of the efficiency of agricultural water use and is a recommended component for preparation of agricultural water management plans in California. An FAO-56 based web application has been developed to facilitate retrospective evaluation of ETAW, and hence CCUF, at field level. The current application is optimized for prevailing climate in four of the state’s main growing regions: San Joaquin Valley, Sacramento Valley, Central Coast, and North Coast. User inputs include crop type, soil texture, irrigation method, daily irrigation volume, daily rainfall, and seasonal start/stop dates to define the analysis period. Time series of fractional green canopy cover (Fc), based on Landsat and Sentinel-2 Earth-resource satellite observations, are imported from NASA’s Satellite Irrigation Management Support (SIMS) system. Grass reference evapotranspiration (ETo) time series are accessed from Spatial CIMIS (California Irrigation Management Information System). Daily crop height (h) is estimated as a simple function of typical maximum height for the given crop type (from FAO-56) and Fc. A vegetation density coefficient (Kd) is derived from Fc and h. Stomatal control factors during mid-and late-season are applied to tree and vine crops. Typical values for minimum daily relative humidity and mean daily windspeed, derived from historical CIMIS weather data, are used to correct for regional deviations from standard climate (defined as RHmin=45%, windspeed =2m/s). The resulting daily basal crop coefficient (Kcb) represents the ET of a well-watered crop with minimal soil evaporation, relative to ETo. A soil water balance sub-model for the top 0.1 m is used to calculate daily evaporation coefficients (Ke). A second sub-model applies to the root zone to calculate crop water stress coefficients (Ks) and effective precipitation (Pe), which is the fraction of rainfall that is available for crop use. Those coefficients are combined with Kcb and ETo to calculate daily ETc. ETAW is then derived as cumulative ETc less cumulative Pe. For verification purposes, sensor installations were used to measure seasonal ETc in commercial fields for several annual and perennial specialty crops by soil water balance and energy balance methods. Model estimates of seasonal ETc show mean absolute error of <10% compared to the ground measurements.

Derivation↗

NASA NTRS2022

Assimilation of Remotely Sensed Leaf Area Index Enhances the Estimation of Anthropogenic Irrigation Water Use

Representation of irrigation in Earth System Models has advanced over the past decade, yet large uncertainties persist in the effective simulation of irrigation practices, particularly over locations where the on-ground practices and climate impacts are less reliably known. Here we investigate the utility of assimilating remotely sensed vegetation data for improving irrigation water use and associated fluxes within a land surface model. We show that assimilating optical sensor-based leaf area index estimates significantly improves the simulation of irrigation water use when compared to the USGS ground reports. For heavily irrigated areas, assimilation improves the evaporative fluxes and gross primary production (GPP) simulations, with the median correlation increasing by 0.1–1.1 and 0.3–0.6, respectively, as compared to the reference datasets. Further, bias improvements in the range of 14–35 mm mo^(−1) and 10–82 g m^(-2)mo^(−1) are obtained in evaporative fluxes and GPP as a result of incorporating vegetation constraints, respectively. These results demonstrate that the use of remotely sensed vegetation data is an effective, observation-informed, globally applicable approach for simulating irrigation and characterizing its impacts on water and carbon states.

Earth System Models↗

NASA NTRS2006

Estimating Temperature Retrieval Accuracy Associated With Thermal Band Spatial Resolution Requirements for Center Pivot Irrigation Monitoring and Management

This study explores the use of synthetic thermal center pivot irrigation scenes to estimate temperature retrieval accuracy for thermal remote sensed data, such as data acquired from current and proposed Landsat-like thermal systems. Center pivot irrigation is a common practice in the western United States and in other parts of the world where water resources are scarce. Wide-area ET (evapotranspiration) estimates and reliable water management decisions depend on accurate temperature information retrieval from remotely sensed data. Spatial resolution, sensor noise, and the temperature step between a field and its surrounding area impose limits on the ability to retrieve temperature information. Spatial resolution is an interrelationship between GSD (ground sample distance) and a measure of image sharpness, such as edge response or edge slope. Edge response and edge slope are intuitive, and direct measures of spatial resolution are easier to visualize and estimate than the more common Modulation Transfer Function or Point Spread Function. For these reasons, recent data specifications, such as those for the LDCM (Landsat Data Continuity Mission), have used GSD and edge response to specify spatial resolution. For this study, we have defined a 400-800 m diameter center pivot irrigation area with a large 25 K temperature step associated with a 300 K well-watered field surrounded by an infinite 325 K dry area. In this context, we defined the benchmark problem as an easily modeled, highly common stressing case. By parametrically varying GSD (30-240 m) and edge slope, we determined the number of pixels and field area fraction that meet a given temperature accuracy estimate for 400-m, 600-m, and 800-m diameter field sizes. Results of this project will help assess the utility of proposed specifications for the LDCM and other future thermal remote sensing missions and for water resource management.

Ryan, Robert E.↗

NASA NTRSDate not supplied

Measured and Modeled Vineyard Canopy Development and Water Use

Two publicly available applications relevant to vineyard irrigation management are described. OpenET is a satellite-based system that applies an ensemble of remote sensing methods to enable wide-area monitoring of evapotranspiration (ET) and related measures such as vegetation canopy development (via the NDVI spectral index). Data are freely available at one-quarter acre spatial resolution, and may be automatically aggregated to the individual block level. The satellite-based daily ET data were compared with in-situ eddy covariance measurements collected by micro-meteorological instrumentation in a Central Coast vineyard over a three-year period (2020-2022). Estimation uncertainties were reasonably consistent with prior reports for GRAPEX sites in the Central Valley and North Coast. The CropManage (CM) web application is a free software tool developed and operated U.C. Cooperative Extension for ET-based irrigation scheduling of major specialty crops. CM provides specific guidance for irrigation events in terms of irrigation system runtime. Applied water recommendations are based largely on estimated ET, derived from assumed canopy cover and associated crop coefficients, since the last irrigation or rainfall event. The application was recently adapted to vineyards by accounting for presence of winter/spring cover crop, and vine water stress imposed by regulated deficit irrigation. A 2022 field campaign involved 12 Central Coast and San Joaquin Valley commercial vineyards, and OpenET data were used to help evaluate CM output. Maximum percent vine cover was compared to estimates derived from average July satellite NDVI. The difference for 10 sites lacking midseason groundcover ranged from 0-7% between datasets with average agreement near 4%. Cumulative ET estimates agreed with OpenET to within 12% at the majority of sites, while larger discrepancies at the remaining sites may require additional data collection and analysis during the 2023 season. Satellite based systems such as OpenET have the potential to help parameterize CropManage and similar agricultural decision-support systems.

Measured↗

NASA NTRS2016

Satellite Estimation of Fractional Cover in Several California Specialty Crops

Past research in California and elsewhere has revealed strong relationships between satellite NDVI, photosynthetically active vegetation fraction (Fc), and crop evapotranspiration (ETc). Estimation of ETc can support efficiency of irrigation practice, which enhances water security and may mitigate nitrate leaching. The U.C. Cooperative Extension previously developed the CropManage (CM) web application for evaluation of crop water requirement and irrigation scheduling for several high-value specialty crops. CM currently uses empirical equations to predict daily Fc as a function of crop type, planting date and expected harvest date. The Fc prediction is transformed to fraction of reference ET and combined with reference data from the California Irrigation Management Information System to estimate daily ETc. In the current study, atmospherically-corrected Landsat NDVI data were compared with in-situ Fc estimates on several crops in the Salinas Valley during 2011-2014. The satellite data were observed on day of ground collection or were linearly interpolated across no more than an 8-day revisit period. Results will be presented for lettuce, spinach, celery, broccoli, cauliflower, cabbage, peppers, and strawberry. An application programming interface (API) allows CM and other clients to automatically retrieve NDVI and associated data from NASA's Satellite Irrigation Management Support (SIMS) web service. The SIMS API allows for queries both by individual points or user-defined polygons, and provides data for individual days or annual timeseries. Updates to the CM web app will convert these NDVI data to Fc on a crop-specific basis. The satellite observations are expected to play a support role in Salinas Valley, and may eventually serve as a primary data source as CM is extended to crop systems or regions where Fc is less predictable.

satellite↗

NASA NTRS2010

Towards Global Simulation of Irrigation in a Land Surface Model: Multiple Cropping and Rice Paddy in Southeast Asia

Agricultural land use significantly influences the surface water and energy balances. Effects of irrigation on land surface states and fluxes include repartitioning of latent and sensible heat fluxes, an increase in net radiation, and an increase in soil moisture and runoff. We are working on representing irrigation practices in continental- to global-scale land surface simulation in NASA's Global Land Data Assimilation System (GLDAS). Because agricultural practices across the nations are diverse, and complex, we are attempting to capture the first-order reality of the regional practices before achieving a global implementation. This study focuses on two issues in Southeast Asia: multiple cropping and rice paddy irrigation systems. We first characterize agricultural practices in the region (i.e., crop types, growing seasons, and irrigation) using the Global data set of monthly irrigated and rainfed crop areas around the year 2000 (MIRCA2000) dataset. Rice paddy extent is identified using remote sensing products. Whether irrigated or rainfed, flooded fields need to be represented and treated explicitly. By incorporating these properties and processes into a physically based land surface model, we are able to quantify the impacts on the simulated states and fluxes.

Beaudoing, Hiroko Kato↗